Footage changes once color project is loaded from disk

Hi all,
I have a big problem in Color 1.0.4.
I send a 20 minute edit from FCP to Color. All is fine. The edit is the first part of a marriage service. A shoot taken with two camera.
I did originally put the sequence together using Multi-Cam, but then I replaced all the clips with the originals as I had problems when I first went into color with this.
The problem is that one of the angles appears to have lost the information as to where the INOUT points are...This happens once the color project has been loaded from disk. (ALL is fine until I shut Color and reload the project). The sections in the sequence where this camera is used always plays the source file for that camera from the beginning. (A shot from outside the church!) This is causing me all sorts of problems and I cannot seem to get past this. I need to save the work and then re-open in FCP to see what the grade looks like as I don't have an external monitor.
Any help with this would be appreciated.
The thumbnails show the correct footage from the camera. Adding a section to the render queue results in a render of 1 frame. Even though the IN and OUT points on the Color timeline show roughly 20 seconds, the render view shows an in and out point one frame apart...
Thanks in advance,
Richard
Message was edited by: richyN

What is/are your sequence codec/settings?
I know I get this sort of behavior on my external monitor if I've got a Kona export settings mismatch, but not on the timeline.
When you observe the application running back to "first frame" on park, but finds the correct images on play, sort of infers that there is a broken reference somewhere in how FCP is recalling the media.
Bad container? frame rate mismatch?
But before you re-edit, can you save the effort to this point by "Baking out" a movie of the sequence?
It would be at least interesting to know if QT finds the right media at your edit points. At that point, a fairly straightforward movie could be razored and sent to COLOR...
jPo

Similar Messages

  • BootCamp cannot load from disk code 5

    I tried to install Windows 7 using BootCamp from an ISO image DVD I made. Now when I restart my iMac, it takes me to a black screen with the "cannot load from disk code: 5" error message. The "option key" and "eject key" don't work at all and no matter how many times I restart it, it always goes back to this screen where I can't seem to press anything and the dvd is stuck. Please help.

    I burned my disc at 2 speed in Toast. Burned my XP iso like this too, and that worked (not on early 2011 mbp's)
    I even deleted the bootcamp partition and resized the osx partition to the max. That way i have a clean partition/install each time i trie. Used partition size is standard (20gb) so that shouldn't be an issue. And the iso i'm using for win7 is being used by al lot of others and they seem to have no problems and claim it to be a bootable disk.
    The only probable solution i've found is a workaround in which you launch your install from a different running OS, and go from there. However i'm not such a windows fan i got a full working pc. Just my mbp's so this really isn't an option and it seems a bit far off because i got a concrete error code.
    I'll try to get a copy of parallels to test my iso, but i don't want to emulate, i just need boot camp to work!

  • How can I change the color of all folders from light blue to another color?

    My computer was just upgraded from Tiger to Leopard, and now all the file folder icons are pale blue on the desktop and elsewhere. My desktop is green and those light blue folders do not look good on a green background.
    How can I change the color of the folder icons to another color?

    Hi ys,
    You appear to have taken a wrong turn on the information highway and would up in the backwater known as the AppleWorks forum. This is a place for discussion of issues and techniques connected with the now discontinued Apple productivity application AppleWorks.
    Yours is a System question, concerned with how to accomplish something in the Finder, part of the Mac OS X software you recently upgraded. The question will be better served in the Mac OS X v10.5 Leopard section of discussions. The link will take you to that section, where I'd suggest using the Finder and Dock forum.
    Regards,
    Barry

  • Thunderbird changing existing color, and occasionally font, from original messages in replies

    Hello,
    Thunderbird keeps consistently changing text color (always) and font (sometimes, intermittently) when I reply to a message. I hope the attached images will make clear what I mean.
    I have many e-mail exchanges where individuals involved use both font and color to make it instantly possible to distinguish who said what, and often in what order, based upon the font being specific to the individual and the color specific to the response given.
    You will see in the attached screen shots that the original message contained two different fonts in dark blue colors. When I hit "Reply" the compose window switches all the text from the old messages to black. In this case it wouldn't matter much, but it can be very disorienting when you have an e-mail exchange going on that's got more participants all of whom use signature fonts and change either the font and/or color as the conversation progresses. Having everything "go black" removes essential context.
    I also find it odd that when you place your cursor in the middle of existing text and open up a new line to insert your own material that the new material always mimics the last font that was in the material you've just "split open" to add your own reply. In virtually every other e-mail editor I've used when you place yourself in existing text and split it apart by hitting a return the opened area typically would use the font and font color you currently have specified in the compose window.
    If there are settings I need to tweak to:
    1. Force Thunderbird to maintain all existing fonts and font colors when replying to an existing e-mail message,
    2. Get Thunderbird to use the font and font color I have chosen in the compose window any time I split existing quoted material to add new material,
    I'd love to know what those settings are.

    Matt,
    I decided to do some experimentation with creating multiple messages and replies strictly within Gmail's web interface and then to reply to same from Thunderbird. After that, I attempted to start the same sort of chain strictly using Thunderbird to create the messages. The difference is pretty stark.
    The first attachment is how the multiple fonts and colors that originated from Gmail show in Thunderbird's reading window. They are all correct here.
    The second shows how the multiple fonts and colors that originated from Gmail show up when I reply from within Thunderbird. Again, all of those fonts and colors are maintained as sent and the font and color I designated in my Thunderbird options are what get used when composing the reply.
    The last shows what happens when I sent a message created in Thunderbird with one font and color and then go to reply to it from within Thunderbird after having switched my default font and color choice for composition intentionally prior to replying. The font from the original message is retained in the reply, but the color is converted to what has been selected for composition. This suggests to me that Thunderbird is not retaining color information at each "level" within a reply. It has to have sent color information in the original message because it shows up in that color on receipt when reading (I didn't bother with a screen shot, but if you want one I can get one). When replying it is stripping or overwriting the color information from the original message and using the current compose color and applying it to everything in the window.
    As far as I'm concerned, that's a bug.
    Brian

  • How do  I change the color of an object from a primary color to 2ndary (brown or black)

    How would I change an object's color from red to black, I change the color from red to blue using the change to color effect, but for some reason I am unable to change it to brown or black or gray or another basic color

    Neither brown or black are secondary colors. Well, brown could be considered a rather desaturated orange...
    Anyway, that's neither here nor there.
    You can use the Hue/Saturation effect. Help page on it here: After Effects Help | Color Correction effects
    You simply pick a channel and adjust the channel range to only select the colors you wish.
    Here's a tutorial:  http://tv.adobe.com/watch/learn-photoshop-cc/shifting-colors-with-huesaturation/
    Going to (or from) white or black is nearly impossible no matter what effect you're using and is not recommended.

  • New blank HD won't load from disk

    I just installed a new HD on my IMac 24" Early 2008.  I get a message to restart my computer. I have held down the C key and it works for a while then gives me the gray screen and the message to restart my computer.  Any suggestions?

    Did you insert the Leopard installer DVD into the optical drive, then try restarting and using the C key?
    Booting From An OS X Installer Disc
    1. Insert OS X Installer Disc into the optical drive.
      2. Restart the computer.
      3. Immediately after the chime press and hold down the "C" key.
      4. Release the key when the spinning gear below the dark gray Apple
          logo appears.
      5. Wait for installer to finish loading.
    Or:
    Boot Using OPTION key:
      1. Restart the computer.
      2. Immediately after the chime press and hold down the
          "OPTION" key.
      3. Release the key when the boot manager appears.
      4. Select the desired disk icon from which you want to boot.
      5. Click on the arrow button below the icon.
    You need to insert the DVD first in either of the above.

  • Is it possible to change the color of a layer of a Customs CSS from an External Style sheet?

    Hi,
    I have sucessfully link External .css  file to my HTML page and able to change the font size of the headlines and the paragraph.
    What I am not able to do is to ADD the color my Custom CSS from the External sheet.  I have difined the color attribute as a 'Advance'
    and gave it the same name "#bigwraper" that is has in my HTML file.
    Attached is the color outline of my 'Blank Layout' with colors?
    Thank you.
    Dreamer101.1

    Hi Murray,
    I am building a web site on which the entire content would be changed at least daily. The website would have similar design to www.Helium.com
    The page will have CCS layout boxes in which different content would  be pasted.
    To re-phrase my question:  I want to know how to change the color of a layer from an external style sheet?
    Because my home page 'Sidebar' and colors would be the same for all page, only the content of different pages would be different.  If I want to change a color of my web side pages, I need to learn how to do it in one spot through an External Style Sheet.
    I am amble to link my external style sheet and to change H1 tag and to give it different colors. But I was not sucess with change the color of a layer on which my content sits around.
    I took out the color from my HTML page and gave the same name to the layer in my External Style Sheet with the same color.
    Hope my question and the reason I was able to clarify.
    cheers,
    Dreamer101.1

  • Changing mask colors or placing transparent text over another layer

    Hey. Looking for a little help here. Basically I have some video footage on one layer. I want to make a text mask that will go over the footage so that the footage can only be seen inside the letters. I was able to do this by creating an image mask and inserting the text into the HUD, however now the mask background around my letters is black and I need it to be white. Any thoughts for how to change the color of the mask from black to white while still leaving the lettering transparent so that the video footage is visible behind it? Also willing to try other techniques if you have thoughts. Thanks for your time,
    Eric

    Add a white rectangle shape to the group, put it at the bottom.

  • How do I change the color of my logo?

    I wanted to change the color of my logo from black to brown.  I have tried the color replacement tool, but that have not worked.

    Hello,
    There are many different methods to get this done, do you need it to be a specific shade of brown? if not, here's a simple technique:
    Go to Image > Adjust > Hue and Saturation
    turn on the Colorize checkbox. Increase the lightness slider a few degress. Then play around with the Hue and Saturation sliders until you achieve the desired color.
    For reference, here is an example using Hue/Sat on black text:
    please post back if you have any questions.

  • Can I change the color of a symbol in Adobe Flash Professional after it has been converted into a tween?

    I am a bit new to the program and would appreciate the help!

    You don't convert a symbol to a tween. You can tween a symbol, but that is just applying a movement over time to that symbol. If you select the symbol at either keyframe in the tween, you can still adjust the symbol at either keyframe. What do you mean by changing the color?
    If you select the symbol at a keyframe, you can then double click on it to edit the original object in the Library, if you make a change to that original object, you will see the result at both the first and the second keyframe. So if you want to change the color of a symbol from the first keyframe to the second keyframe then you have to do more work. You can use one of several methods in Actionscript to alter the color of a symbol, or, you could make up the symbol from other objects and then make changes to those parts from one keyframe to the second.
    Maybe you can give us a fuller explanation of what you have in mind.

  • How do you change the color of sites visited in safari 7.0?

    Hey guys, I was wondering if you could change the color of sites visited from a purplish to any other color?
    Thank you for your help in advance

    http://www.ehow.com/how_8702714_change-color-visited-links-safari.html

  • How to change the color of circles and lines in Acrobat DC

    I'm using the Add Circle and Add Line tools in the Fill & Sign tool set to add markups to a PDF. Is it possible for me to change the color of these tools from the default Black to something else?

    Hi kevh,
    Currently, there is no way to change the properties for the Add Line and Add Circle tools.
    Best,
    Sara

  • Is there any way to change the color scheme in a document in Pages?

    I have come from a PC using Publisher for a weekly newsletter and am trying to use Pages to accomplish the same thing.  i want to change the color scheme from week to week and have not found a way to accomplish this.
    I am currently using Word for Mac for this, but I would like to move over to Pages.  I'm playing with it some, but can't seem to find a way to change the color of the publication from week to week.  To change to another template all together would cause me to have to reinvent the wheel each and every week, and I'm not willing to do that.
    Adobe Illustrator is an option, but it looks mighty complicated to set it up...  And I've balked at the price tag.
    Any suggestions?

    Pages does not have Themes like Word.
    There might be other ways to achieve what you want by swapping master objects and changing colors of Styles. A bit more work but not horrendously more.
    You can name color swatches in the Color Picker so you could set up a set of colors there then update styles and objects systematically using those swatches.
    Illustrator would be an extremely poor choice for a Newsletter.
    Have a look at the new Swift Publisher 3 in the App Store, currently 30% off. They have added some very good tools that have brought it into a much more Pro usable form. Including many key features that Pages lacks.
    Peter

  • How do I create a duplicate image inside the same page? Then how do I change the color of that image

    how do I create a duplicate image inside the same page? Then how do I change the color of that image from black to red?

    Hello there!
    Here is one way to create a duplicate image and colorize it. As you can see below, I have one image right now, that I want to duplicate.
    My layers panel looks like below.
    To duplicate your image, click the downward arrow on the right side of your Layer Panel.
    Select Duplicate Layer. This will duplicate the layer that the image is on.
    Select "OK" to approve the duplication.
    As you can now see in the Layers panel, the image is duplicated. The new layer is now at the top of the Layer panel.
    Now to colorize your image, go to Window > Adjustments.
    The Adjustments panel will now be opened. Select the Hue and Saturation icon as seen circled in red.
    The Hue and Saturation propertied panel will be opened. I selected "Colorize", and adjusted the hue and saturation bar to achieve the level red in my photo.
    As you can see below, the image is now red.
    Now i want to make sure only ONE of my image layers is red. I moved the Hue and Saturation layer to only be on top of the bottom layer. The image on the top layer now will not be affected by the red.
    Select the move tool, so I can now move the image layers so we can see both of them.
    With each image layer selected, you can take the move tool and move the images. I moved mine on top of eachother and you can see my red layer (bottom) and the non red layer (top).
    I hope that helps. i have also included helpful links.
    Please post back with any questions,
    Janelle

  • How can one change the color of JToolTip background

    how can one change the color of JToolTip background from Purple to user defined ? I am using setToolTipText() method to set the text required but here the background color of the ToolTip is Purple and i wish to change it to white.. how can i do it ?
    i tried to change the color by defining a seperate class JToolTip but i don't know how to set it with a JButton..
    can someone help..
    thanks in advance ..
    avinash

    How can I change the text size and font?Give a man a fish.... Check out UIManager.

Maybe you are looking for