Footage in Premiere doesn't seem to be linked

I'm not sure how to ask this question, because I'm not exactly sure what the problem is.
I transfered a project from a Windows machine to a new external hd and I am now attempting to edit it on a Mac. Naturally, since the hd has a different name and the files are in different locations, I had to "locate media" when I first opened the project. This seemed to work fine, except for two folders.
When I play the footage from the Media Browser or Project window, each file is linked correctly. However, in the timeline, all the clips from these two folders have diagonal lines over them and cannot be played. I'm attaching a screenshot.
Help, please.

When I right-click on a file from the bin and select "Reveal in Finder," the correct file is shown. When double-click on a file, the source monitor shows the correct clip. The same goes for when a file is selected from the timeline. However, since the in and out points have been moved to a point after the clip is over, there is no video to display. So what I am wondering is: how did the in and out points get shifted, and if there is a way to fix it all at once, rather than manually changing each clip.

Similar Messages

Insert | Hyperlink doesn't seem to allow linking to subtopics in RoboHelp 10.

I updated to RoboHelp 10 yesterday and today when I try to insert a hyperlink it creates it to the top level, despite the fact that I'm using Find to locate the topic and click on a specific bookmark within the topic. It used to work. Please tell me I don't have to *gasp* remember my bookmark names.
Thanks!
-m

In the image you show (and the second of the two I show), you'll notice the bincoluars icon (aka: find) to the far right of Link to: input field. If you click that, it will bring up the dialog shown in the first image of post. I did briefly show my process, but to be clearer and reduce ambiguity, it looks like this:
Open topic.
Select hyperlink text in topic.
Click Find
Type name of topic (or more usually, paste it)
Select bookmark link from the list.
Click OK
Notice the bookmark link doesn't have my direct link.
Curse* and fume.
It should be noted that I can select a bookmark from the topics list in the box below, but I have a good many files and bookmarks and I was trying to cut down on the scrolling required.
Thanks!
-m
*Sometimes I omit the cursing for time considerations.

Dynamic link between Premiere CC and After Effects CS6 doesn't seem to be working :(

I'm editing with RED r3d files. I have just updated to CC but it doesn't want to dynamic link with After Effects CS6

Hello,
Sorry but Dynamic Link only works between the same version of the products.
Best,
Peter Garaway
Adobe
Premiere Pro

Canon 300 footage crashing Premiere PRO 6 on Mac PRO

As stated above... C300 footage crashes Premiere Pro when using on my Mac Pro. It happens when you scrub through the footage. I have done plenty of searches and everyone with a Mac Pro seems to be having the same problem. The footage also has glitches in the frames when it plays and renders. The only solution I have found is to transcode the footage to something else, which kind of defeats the purpose of using Premiere Pro 6 in the first place. I know this is a problem specific to the Mac Pro because my Macbook Pro does not have this issue when dealing with C300 footage. Does anyone know of any actual solution to this other than transcoding all the footage?
Premiere Pro 6.02
Mac Pro OSX 10.8.2
2 x 2.66 6 core Intel Xeon
32GB Ram
ATI Radeon HD 5870 1024

Hello,
Because you've said you already "re-downloading":
1. Maybe you have to activate/deactivate, so please have a look there:
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
2, Sometimes, we know in the meantime, the "opm.db file" is the culprit. In this case you should delete it.
3. Did you already try "uninstalling and re-installing"?
Be careful with (de)installing aso. by (de)installing by your own resources. As much as I regret it and as strange as it may seem I fear it's a challenge for Adobe's Creative Cloud Cleaner Tool.
Sometimes - for whatever reasons - CC doesn't "want" to work. In this case you should CC completely delete and reinstall by help of Adobe Creative Cloud Cleaner Tool. (A try to uninstall by own resources is not enough!)
I quote: Adobe Creative Suite Cleaner Tool helps resolve installation problems for Adobe Creative Cloud and Adobe Creative Suite (CS3-CS6) applications. The tool removes installation records for prerelease installations of Creative Cloud or Creative Suite applications. It does not affect existing installations of previous versions of Creative Cloud or Creative Suite applications.
Please use: http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html and follow the prescribed sequence of operations
4.If necessary and for further questions click through http://helpx.adobe.com/contact.html and if "open" please use chat, I had the best experiences.
Good luck!
Hans-Günter

I bought Photoshop 12/premier package but all I get from premier is the Read Me bit on my computer. The download doesn't seemed to have worked

I bought PS Elements 12 and Premier as a package but the Premier does not seem to have downloaded...All I have is the "READ ME" pages and no programme

Noel elliot
What is your computer operating system, and is it 32 or 64 bit?
At this time, is Premiere Elements 12 listed in Control Panel/Programs as an installation product?
Where did you purchase this Photoshop Elements 12/Premiere Elements 12 bundle - from Adobe as an online download or from an authorized reseller offering the box packing with installation discs? From your "The download doesn't seemed to have worked", I am assuming that this was an online download from Adobe.
On your computer, you should have started with 4 installation files
Photoshop Elements 12. An .exe file and .7z file specific for Photoshop Elements 12...and file targeted appropriately for 32 or 64 bit computer.
Premiere Elements 12. An .exe file and .7z file specific for Premiere Elements 12...and file targeted appropriately for 32 or 64 bit computer.
You double click the .exe first and afterward as indicated .7z.
Each of these products will have its own serial number.
Do you now have those components. If not, then you need to start again with the download to get those files on your computer in order to start the product installation.
Please review and consider. Any questions or need further clarification, please do not hesitate to ask.
Thank you.
ATR

Premiere doesn't ripple markers. Any workarounds?

I know this is probably pointless, but I have a long timeline with several encore chapter markers and now I have to move one short sequence that was at the beginning, all the way to the end, which I know is going to completely mess up my markers. I know Premiere doesn't ripple markers (this is one of those times when I wish I had used Sony Vegas), but I was hoping that maybe someone smarter than me came up with a workaround for these types of situations so I don't have to waste so much time moving all these markers. I searched and I searched but I couldn't find anything concrete. I don't even need to ripple them, if there was a way to move them all together by the same amount of time, that would be good enough for this project.
Any suggestions? (That are not to fill out the wish form, please)
Thanks,
Sebastian

You seem a bit conflicted.
But well, I'll hold on renting their software until they add ripple markers, something that Vegas has had since at least 2007 when I started using it.
The "rental software" now has what you want. aka CC.
Probably a CC feature, I don't have that in CS6, but I'm in no need to upgrade to rental software. I prefer to own software.
What are you going to do?

Mini dvi to s-video/composite adapter doesn't seem to work?

basically i'm trying to hook my rather new 2.53 ghz mac mini to my tv, which basically has rca inputs. so, having seen several laptops hooked to this tv as simply as using an s-video to composite adapter, i figured it would be as simple as getting the mini dvi to composite adapter and i'd be good. well, for some reason this doesn't seem to do anything. the other weird thing is that when i hook the cable from the composite adapter to the tv, i get a buzz out of the speakers as the connection is being made. why is a video signal having anything to do with the audio? plugging my playstation 2 into the same input works fine. why the difference?

Boece wrote:
!http://images2.monoprice.com/productmediumimages/47241.jpg!
+
!http://images2.monoprice.com/productmediumimages/48501.jpg!
That's the setup I've used. Works great for video and photos, but webpage text can be difficult to read.
I used the yellow composite input rather than the s-video. My old tv is inside an “entertainment center” type tv stand and is so friggin heavy, it’s a pain in the axx to move, so I just used the composite plug on the front of my tv. Since the Mac mini is sitting in front of the tv it works great:-)
http://discussions.apple.com/thread.jspa?threadID=2430645&tstart=0
Message was edited by: James Press1

Need lightroom 4.4 asmac is 10.6.8 and not compatible with anything higher. Does this come with the creative cloud? Would really like a disc but that doesn't seem to happen anymore. Currently have cs4 and d7100 hence need 4.4 to open raw Any idea

need lightroom 4.4 asmac is 10.6.8 and not compatible with anything higher. Does this come with the creative cloud? Would really like a disc but that doesn't seem to happen anymore. Currently have cs4 and d7100 hence need 4.4 to open raw Any ideas? Is this now customer service or does adobe have a customer service team . Site not user friendly. Thanks

Graham Giles wrote:
Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
• I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
I know that using a cloned drive would work well in this instance.
I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive?

Wacom Tablet doesn't seem to work all of the time?

I have a Wacom Intuos 3 tablet, not more than a year old. I recently installed it onto my Macbook Pro and it worked fine, but when I unplugged it and came back to work with it later, it doesn't seem to work. The mouse doesn't respond to where I click on the pad.
So, I've reinstalled this a couple of times and was able to make it work perfectly, but today when I went back to work in photoshop, it doesn't seem to be responding again.
Does anyone have any tips? I know that Leopard likes you to eject USB devices instead of just pulling them out of the slot, but I don't see anywhere to eject it.
Does anyone know what's up?

Downloaded a driver from website, tablet works now.

HT3235 I just bought a Micro-DVI to video adapter to try and hook my MacBook Pro 13" I bought mid 2009 to my old TV, the adapter doesn't seem to fit any of the connections, is this the right adapter?

I just bought a Micro-DVI to video adapter to try and hook my MacBook Pro 13" that I bought in mid 2009 to my old TV (svideo), the adapter doesn't seem to fit any of the connections on my macBook pro, is right adapter?

Shootist007 wrote:
Apple doesn't offer a MDP to AV or componet connect . Only DVI and VGA. They also don't offer one to HDMI. You have to go aftermarket to get one to HDMI.
Quite right, but as the OP does not have component or composite connections not important.
To the OP, this does work, but is not the cheapest, and as it appears that Apple no longer sell an SVideo adaptor cable 3rd party it will have to be.

1.burned a hole in my screen can I get this repaired? 2. Even though I have it set to open up to a blank screen, no web pages, my computer (safari) continuously opens with multiple safari sites open. It doesn't seem to matter what I do, it just reverts

1. I burned a small hole in my screen, is that fixable/replaceable? 2. Even though I have my 15" MacBook Pro set to open to empty screen when I open Safari, it constantly opens multiple previous pages. It doesn't seem to matter what I do it just reverts back to opening multiple pages. Major security risk, my bank pages have popped back up after my computer has been shut down, account numbers and all. I took my computer to an Apple store and the genious there tols me... "honey, you can't hold your laptop on your lap, that's the problem, it's getting too hot" he honestly said that. Could someone please help me? Thanks

Apple doesn't call its portable machines 'notebooks' instead of 'laptops' for nothing - using a MacBook Pro in your lap can cause some burns on your skin, poor ventilation, etc. So use it on a hard flat surface - not your lap, pillows, bedclothes, etc.
As for burning a hole in your screen, you'll have to revisit the Apple Store and see how much they would charge for a new screen. It's likely to be a bit expensive.
And if you've Safari set to re-open tabs when you restart, you can disable this feature -> Safari-Preferences-General.
Good luck,
Clinton

How does Azure Compute Emulator (or the Azure one) determine if a role is web project or something else ("The Web Role in question doesn't seem to be a web application type project")?

I'm not sure if this is F# specific or something else, but what could cause the following error message when trying to debug locally an Azure cloud service:
The Web Role in question doesn't seem to be a web application type project.
I added an empty F# web api Project to a solution (which adds Global.asax etc., I added an OWIN startup class Startup etc.) and then from an existing
cloud service project I picked Roles and
chose Add
-> Web Role Project in solution, which finds the F# web project (its project type guids are 349C5851-65DF-11DA-9384-00065B846F21 and F2A71F9B-5D33-465A-A702-920D77279786),
of which the first one seem to be exactly the GUID that defines a web application type.
However, when I try to start the cloud project locally, I get the aforementioned error message. I have a C# Web Role project that will start when I remove the F# project. I also have F# worker
role projects that start with the C# web role project if I remove this F# web role project. If I set the F# web project as a startup project,
it starts and runs as one would expect, normally.
Now, it makes me wonder if this is something with F# or could this error message appears in C# too, but I didn't find anything on Google. What kind of checks are there when starting the emulator and which one needs
failing to prompt the aforementioned message? Can anyone shed light into this?
Sudet ulvovat -- karavaani kulkee

Sudet,
Yeah you are right, the GUID mentioned seems to be correct and the first one i.e. {349C5851-65DF-11DA-9384-00065B846F21} means the web application project which compute emulator uses to determine while spawning up role instances.
You might want to compare the csproj of your C# and F# web projects which might give some pointers.
Are you able to run your F# web project locally in IIS? If yes then you will definitely be able to run it on azure so I will recommend to test it in IIS Express first.
Here are some other tips which you can refer or see If you are yet to do those settings
1. Turn on the IIS Express - You can do it by navigating to project properties
2. Install Dependent ASP.NET NuGets / Web Api dependencies (If there are any missing), Reference System.Web assembly
Also I will suggest to refer this nice article about how to create a F# web Api project
http://blog.ploeh.dk/2013/08/23/how-to-create-a-pure-f-aspnet-web-api-project/
Hope this helps you.
Bhushan | http://www.passionatetechie.blogspot.com | http://twitter.com/BhushanGawale

I have consolidate my folders related to the video I am in the progress of working on. Premiere elements does not follow their new location. How do I syn them back up all at once so premiere doesn't ask me for their location when I open the project

I have consolidate my folders related to the video I am in the progress of working on. Premiere elements does not follow their new location. How do I syn them back up all at once so premiere doesn't ask me for their location when I open the project

This is the Photoshop Elements forum, not the Premiere Elements forum, located here:
https://forums.adobe.com/community/premiere_elements
When you open the project, it should ask you where the first file is located. After you tell it where it is, it should be able to find the rest of them if they are located near the first one. Then save the file. If you move the files again, you will have to relink them again.

My apple tv is registering on my tv - i can see it on my system info screen but the apple tv doesn't show up, as well my imac doesn't seem to let me share - so i don't know whats wrong, why my apple tv isn't working

anybody able to help me with my setup for apple tv. i've followed the directions in the guide and my tv doesn't seem to register in part. it's weird because my tv system info identifies the apple tv but the screen never went black and it doesn't show anything, too, my imac doesn't seem to register the apple tv unit either

I would try connecting it to another tv to see if it works there if it does
then likely your tv can't handle the default resolution and you should lower it on the other tv
if not then you should connect it by usb to the computer and use itunes to restore it's firmware

Safari on my iPhone 6 running 8.02 doesn't seem to work right. Some Java scripts don't show correctly and they do on other browsers I have downloaded. I tried almost everything and nothing seems to work to fix it. Please help.

Some websites like the one of my college uses JavaScripts and they seem to load correctly to a certain point but then not really. For example in one it would say select an option from the left menu. And I do it hut nothing happens. But when I go to the same website in another browser on my phone. The JavaScript works completely and allows me to see whatever I was clickig on that menu. I have seen that there are other websites being affected too. I tried clearing my cookies and data. even restarted my phone. And doesn't seem to work. I don't know how change the configuration any more to make it work like normal. At first I thought it was my school's website but it never got fixed. And now I realized is my safari browser! I wanna keep using it since I am really familiar with It. If someone knows how to fix this please let me know!
Thanks

You can reset the SMC and see if that helps. If it's a unibody or Retina, follow the method for "a battery you should not remove yourself."
http://support.apple.com/kb/ht3964

Footage in Premiere doesn't seem to be linked

Similar Messages

Maybe you are looking for