Footage is jumpy after exporting to Quicktime movie

I have final cut pro 7 and im working with to different type of footage. One is from my canon t2i and the other is sony 500v AVCHD. Everything was logged and transfered correctly as prores. Everything plays well in the sequence no jumping between between muiltcam shots.The problem comes into play when i right click on the sequence and export to Quicktime movie. I keep all of the default setting of the sequence it was created from. Again everything plays GREAT in the sequence, so i dont think i have any corrupt files.Its weird its like it jumps from 100% on a clip to 98% and then back again. It doesn't play this way thru the entire sequence. I have the new 27 IMac

Did you transcode to ProRes HQ?
If so, your system and or hard drive may not have enough juice to play it back in Quicktime without skipping.
ProRes LT is what your clips should be transcoded to.
If you have Unlimited RT activated for the sequence with dynamic settings, it may appear to play back correctly, but actually the quality and/or frame rate may be lowered slightly for realtime playback.

Similar Messages

Perfect audio in FCPX timeline, distorted after export to QuickTime mov

Anyone experiencing distorted audio with a QuickTime movie file exported from Final Cut Pro X? The audio sounds great in the timeline, but muffled and distorted after exporting it. Here's the kicker, I took that same file and opened it using QuickTime 7 and the audio is fine. I took that same file and converted it to a WMV file using Flip Player, and the audio is fine. So it would seem that the problem is the newest version of QuickTime (v10.4). If any of you have come to a similar conclusion, is there a way to remedy this? It's problematic because when I upload the file to YouTube, the distortion is present. Thanks in advance to everyone who can assist with this.
MY SYSTEM:
MacBook Pro (Retina, 13-inch, Late 2013), 2.8GHz Intel Core i7, 16GB RAM
OSX Yosemite 10.10.2
FCPX v10.1.4
QuickTime v10.4

Hi Al,
Here are the steps I use to export:
From the File menu, I select 'Share' and select 'Master File'
In the pop-up dialog box I click on 'Settings' and select 'H264' as the CODEC
I open the rendered file with QuickTime Player and the audio is distorted.
I open the rendered file with QuickTime Player 7 and the audio is fine
I convert the exported file to a WMV file using Pro version of Flip Player. The audio in the resulting file is fine.
I'm no expert but this would on the outset appear to be a problem with QuickTime v10.4. I can't seem to find a way to resolve this. Thank you for your assistance.
FYI - the audio file for the project is pulled in to FCPX as an mp3 directly from the iTunes library via the 'Music and Sound' browser.

Black screen appears after exporting to Quicktime movie

I'm having trouble exporting a time-lapse video to a QT movie. The screen is always black when I try to watch the finished product. Here's what I'm doing:
I import the jpeg files into QT 7 Pro using "Open Image Sequence." At this point I'm able to watch the video in QT. Now I want to export it to a QT movie so I can import that file into iMovie. From "File," I choose "Export>Movie to QuickTime Movie." I check the Options button to view the Settings and Size. Settings show compression is Apple Intermediate Codec, with Frame Rate set to "Current." Size is HD 1280 x 720, with the "Preserve Aspect Ratio" box checked. I give the file a name, hit "Save" and it begins to export.
When that's done, I go to my desktop and click on the newly created movie file, which opens in QT version 10.1. However, the movie shows up as a black screen.
Can anyone spot the error in what I'm doing? It's got to be something simple. I've created a time-lapse using these steps (I think) before, so I don't think there's a bug in the program anywhere. Any help appreciated. Thanks.
Btw...My OS is 10.7.4. I'm also not trying to create a movie with an audio component -- this is only video.

Can anyone spot the error in what I'm doing? It's got to be something simple. I've created a time-lapse using these steps (I think) before, so I don't think there's a bug in the program anywhere. Any help appreciated.
Not exactly an error, but I do have a question. If you are sourcing JPEG images to an image sequence file which creates a QT Photo JPEG compression file which is already import/edit compatible with iMovie and currently plays in the QT 7 Player correctly without a "black screen" problem, why are you exporting the data to the AIC compression format instead of simply saving the Photo JPEG sequence file and importing it directly to iMovie?

Audio out of sync after exporting into Quicktime using current settings.

Quicktime file has audio out of sync when I export to quicktime movie using current settings.
Ok for about the first few minutes then, out of sync after about 10 minutes.
I shot the footage on tape with my Sony HVR-Z7u.
My Sequence setting is the same as the format of the footage as shown below.
Pixel Aspect Ratio: HD 1440x1080
Editing Time base: 23.98
Quicktime video settings: Compressor: HDV 1080p24
Audio Settings: Rate 48 KHz
Depth: 16bit
Clip format:
Pixel Aspect Ratio: HD 1440x1080
Vid Rate: 23.98
Compressor: HDV 1080p24
Audio Rate 48 KHz
Audio Format: 16bit

I recently moved and both of my editing machines were unplugged for a couple of days until I could get them set up. After turning them back on, the problem had disappeared. Perhaps leaving the system unplugged had allowed some of the internal components to reset? That's the only thing I can think of. At any rate, the issue is gone.

After exporting to quicktime file, the file has sound but no video, what am I doing wrong?

after exporting to quicktime file, the file has sound but no video, what am I doing wrong? The self contained movie box is not checked.

Hi
Did You go via Compressor ?
Did You use QuickTime Conversion ?
I don't
I do
• In TimeLine set In and Out-Points to the full Movie/Project
• Select ALL - Clips and Audio
• Go up to Sequence and down to Render Only - down to Mix Down Audio
• then Sequense and Render Selected - Both (Video and Audio)
• then Export and as QuickTime .mov (NOTHING ELSE)
• I use to do - Not Self-Contained as it saves both time and space
Your Start-Up (Mac OS) Hard Disk - Needs lot's of free space to work OK - I never go under 25Gb free space on this one,
Good Luck - Yours Bengt W

IMovie clips freezing/stuttering while editing in playback & after exporting to Quicktime

I've been working with iMovie since 2003 and if its not one thing, its always another. This particular problem is a new one, and I can't seem to find the get around. Any advice would be appreciated!
Working on a wedding video (large event size but only 6-8 minute project) and the clips are freezing/stuttering in the project and viewer windows when I try to play them back. Each time it freezes, I get the spinning wheel for 5-10 seconds before I can place my marker and try again. Endless cycle. This happened in a few other projects, but those I was able to edit out the freezing clips OR found that exporting to Quicktime seemed to smooth out the glitches, just made editing a pain.
Not this time. Even after exporting to Quicktime, there are still numerous glitches in my quicktime movies (using default and numerous other settings).
Here are the things I've tried: reinstalling my iLife 09 software, running all the updates, clearing off my hard drive (to give me 70+GB of space), detaching my external hard drive and only using internal memory, restarting, and deleting the plists. No luck, still have these glitches.
Could this be an issue with audio or using the stabilization option (used that for the first time)?

jepartyservice wrote:
.. 90min movie .. share to iDVD .. iMovie would freeze and be unresponsive.. .exporting to QuickTime .. 13 hours .. random stills .. iMovie will freeze ..
Would putting all of the clips and the project on an external hard drive help? Would updating to OS 10.5.8 help exporting to QuickTime?
plus your profile, MacBook, indicates to me, your internal harddrive is full.
check with DiskUtility, how many partitions your internal drive has.
check, how much free disk space internal you offer your apps.
imho, extHDD is a MUST when editing video..
.. is there any way to move our already edited clips from iM09 to iM06?
use 'Export using Quicktime', choose dv-stream (for SD content) or AppleIntermediate (for HD content) - these are the only codecs, iMHD6 reads..
this export consolidate the project => it comes into iMHD6 as a single solid file, e.g. no more editing of titles, which are now 'burned into film'.
_consider to create a special 'transfer'-version of your project:_
in Project Browser, select project, ctrl-click, 'duplicate', and create a pre-production version (no titles, no music, additional material for further editing, longer clips to add transitions in iMHD6.. ect)

File type for export as quicktime movie

I thought I read here that "Export as Quicktime Movie" produces a .mov file (although without the extension). I'm using Brightcove to host our videos, and their publishpod says it accepts .mov files, but doesn't seem to work with the file from FCE. Is it really a .mov? Or do I need to export using Quicktime Conversion (and burn up lots more time in the process?)

Thanks...
I did search the forum and nothing addressed my specific issue. Sorry if I didn't phrase my question clearly.
Anyway, I suspect the problem is that the Brightcove software does not work well with the Apple Intermediate Codec. I had no problem with a .mov exported with H.264 compression. This adds extra time to my workflow, but I suspect it will be a necessary evil.

I have FCE 4.0.1 and running OS x 10.7.5 when i burn my movie the audio from my movie clips don't come through . My Sound effects and music can be heard. I export to Quicktime movie, make it self contained then open IDVD for an intro and burn it.

I have FCE 4.0.1 and running OS x 10.7.5 when i burn my movie the audio from my movie clips don't come through . My Sound effects and music can be heard. First I export to Quicktime movie, make it self contained then open IDVD for an intro and burn it. everything sounds great in preview but then ( once again)I lose my audio from my movie clips.

Try Mixing Down the audio before export.
This info may help;
https://discussions.apple.com/message/1060680?messageID=1060680&amp%3b#1060680
Also serch this forum for Mix Down you should find lots of info.
Al

I am using FC Express HD, and for some reason, when I export a Quicktime movie, the final movie will only play audio, and the video is black. I only get the actual video if I export as self contained, or if I exportusing quicktime conversion. Why?

I am using FC Express HD, and for some reason, when I export a Quicktime movie, the final movie will only play audio, and the video is black. I only get the actual video if I export as self contained, or if I exportusing quicktime conversion. Why?

I am using FC Express HD, and for some reason, when I export a Quicktime movie, the final movie will only play audio, and the video is black. I only get the actual video if I export as self contained, or if I exportusing quicktime conversion. Why?

Export To Quicktime Movie (Reference or Self Contained) - GENERAL ERROR

Hi -
I recently had to re-install FCS2 due to problems with OSX.
Now, for some reason, when I want to export from FCP to get a QT reference movie, I get a general error message. All other options from FCP export seem to work, but NOT export to Quicktime Movie.
Any suggestions?
Thanks.
Chris

how so?
we can all do with a dummy's cheat sheet e.g. when making a master monitor the record device, not the computer.
So come on, what'd you do?

Export to Quicktime Movie rerendering. Why?

Hi
I have a DV project edited in FCP 5.11 which is all completely rendered. It's actually made up of a number of sequences joined end to end each of which is rendered before rendering the final 'top' sequence. There are some heavily rendered motion still sections in there, so I don't really want to render them again.
However when I Export to Quicktime Movie, using the current settings, ie not making a self-contained movie, it takes hours to render and looks like it is rerendering everything I painstakingly made sure was rendered to full quality already. Is there anything I can do to stop it doing this? (I am doing this to make things much easier for Compressor, rendering the whole project as a referenced movie.)
Thanks for your attention.
Regards
Jeff Cole
PowerMac G5 Dual 2Ghz Mac OS X (10.4.6)

Just checking that you are, in fact, leaving the menu as Current Settings... and not changing it to match the settings of your timeline...
Also, you say you are not making a self contained movie - you've left that unchecked? Are you sure you don't have any gray realtime bars over the top of your clips - resize, dissolve, etc don't require rendering until export. You need to check the Render All menu (opt-r) under Sequence has everything checked...
Patrick

Export to Quicktime/Movie to MPEG-4 Quality Much Worse with Snow Leopard?

I just tried exporting an HD movie from iMovie using Export to Quicktime - Movie to MPEG-4 for the first time since upgrading to Snow Leopard and besides taking forever to export, the quality at the same settings I've used before is terrible. There's terrible macroblocking even on relatively slow moving scenes. I've exported several movies using the same workflow previously to upgrading and the video was perfect.
I use mpeg-4, H.264 encoding, 4096 bit rate, 1920x1080 HD resolution, key frame every 15 frames. It's definitely a change in the encoder as just sharing to the Media Browser results in expected quality.
As a test, I tried upping the bitrate to 5120 but it didn't help with the macroblocking.
Anyone with similar problems and/or a solution?

I've actually started noticing more artifacts using the Share to Media Browser quicktime presets. The movies that are created don't seem to be as high quality as ones I've created before. It's almost like quicktime is missing keyframes or something and then artifacting. It's not consistent. I've got one mobile formatted movie where it artifacts badly in the first minute and then not at all afterwards. It's kind of frustrating.

Export to Quicktime movie continued crashes. HELP

I have sequence, it renders no problem. Whenever I go to export to Quicktime movie it crashes. I have gone and deleted all files associated with it and redone the sequence from scratch, and I keep getting the same results. Crash while exporting. I am working in DV, so all I do at export is export to Quicktime movie, which means it should be exporting as a DV movie. I am not sure what is wrong please help.
As always thanks in advance for reading and replying to my Post,
Sebastian

I did try burning the 18.05GB file on i-DVD but even with the auto compression of i-DVD it only managed to compress it down to 5.4GB - too large for my 4.7GB DVD.
The only reason I need to burn it so my friend can author it is that he's a little too fussy and wants to author it on Adobe Encore.
I managed to get a firewire drive - but the blooming PC didnt accept it as it was Mac formated!
I just exported the original file as a QT movie, reducing sound quality, frame rate etc but it still comes out at 17.5GB - still to large for i-DVD (and thats with i-DVD's compression, which comes in at approx 5GB!)
I really really blame myself for this as I never really looked into anything more than the creative aspect of FCP. But I've started now.

"Export as Quicktime Movie" -- won't play on other computers

When I use the "Export as Quicktime Movie" option and try to play it back on a Mac without FCP installed, it is missing components and won't play back in Quicktime Player. Of course, I can export with various compressions and then it's fine, but sometimes I want that big "original" file. Any thoughts? Thanks!
Message was edited by: elisenew

You do need the codec you are exporting to installed in the other machine if you wish to play the exported file. A variety of codecs are available only with FCP installed.
A couple of possible solutions are a very high res H.264 or Download [ProRes decoder|http://support.apple.com/downloads/AppleProRes_QuickTime_Decoder_1_0_forMac] to share a prores file between machines.

FCP export to "QuickTime Movie" distorts aspect ratio of all text, displays video correctly.

Hi you all,
My name is Alexander, I'm from Belgium.
I'm working on Final Cut Pro 6.0.6, on a MacBook Pro with a 2.53 GHz Intel Core 2 Duo Processor, running version 10.7.2 of Mac OS X (Lion).
I'm editing a 'making of' of a Flemish feature film. I shot this 35 minute documentary short with my own Canon HDV-camcorder (XH-A1). The Final Cut Pro-project is stored on an external hard drive (1 TB LaCie Minimus).
I've been doing exports to "QuickTime Movie" for years now, without any problems, but since a week or two, FCP started messing up the titles over the video - and the titles only. Their aspect ratio is messed up once exported, but they look just fine in the FCP Timeline (in Viewer, I can verify that the aspect ratio of the titles is always "0"). I'm trying to export this to "HDV - 720p25".
Here's a comparison between the two:
As you can see: the MOV has the titles' aspect ratio all weird, the upper one partly covering the lower one. All titles and text in the docu come out like this, but the video (and audio) is exported correctly.
Any ideas on how to solve this very annoying problem?
Many thanks!!
Alexander

Hi Studio X,
Thank you for your quick reply.
The producers of the film want to upload this making of-documentary on YouTube. Therefore, I need to give them a high-quality-mov with the least possible Megabites. My film has a 35 minute running time.
So I figured: Let's start with the 'smallest' high-quality FCP-export to begin with (HDV-720p25), and throw that one in Compressor, in order to end up with a 'small' but good looking H.264-MOV for YouTube.
But for some reason, those "HDV-720p25"-exports mess up the titles. And I can't figure out why.
Alexander

Footage is jumpy after exporting to Quicktime movie

Similar Messages

Maybe you are looking for