Footage of a building can I cut out the sky and replace with diff. footage?

I have footage of a building in the day, and I want to cut the sky out and put in different footage.
How do I do this, is it possible?

But with a garbage matte, I can't get all the small detail of the building. It only gives my eight points to move around.
Is their a tool to actually get the small detail?

Similar Messages

  • How can i find out the resolution and accuracy of PXI-6602 module?

    I have a 32 bit  8 channel PXI-6602 counter module.  PXI card is interfaced to PC with MXI-4 link. How can i find out the resolution and accuracy of this system.What is the maximum accuracy and resolution i will get from this system. Because optical signal to cmos conversion signal is given as a input to the counter.

    Hi chandhu,
    Were you referring to the accuracy of the count register or the timing clock? 
    PXI-6602 specifications can be found in the NI 660x Specifications.  The resolution of the count register is, as you’ve noted, 32 bits.  This corresponds to a maximum count value of 4,294,967,295.  As long as all of the edges are in accordance with TTL specifications, the accuracy of the count register is 100%.
    On the other hand, the PXI-6602 baseclock accuracy takes on the baseclock accuracy of the PXI CLK 10 signal.  Again, this is all found in the specifications.
    You may also want to check out the NI 660x User Manual – it contains a lot of details on the operation of these counter/timer devices.
    I hope this helps.  Please post back if you have further questions.
    Ed W.
    Applications Engineer
    National Instruments

  • HT1349 How can i find out the size and length of my playlist?

    How can i find out the size and length of my playlist? Anybody?

    It shows up in iTunes on your computer as seen here:

  • Can I carry out the persistence and ORM tasks using EclipseLink?

    Can I carry out the persistence and ORM tasks using EclipseLink (without TopLink or Hibernate) ?
    Is the EclipseLink a free tool and no license fee?
    How about TopLink Essentials?
    Edited by: junez on 18-Nov-2009 05:51

    junez wrote:
    Can I carry out the persistence and ORM tasks using EclipseLink (without TopLink or Hibernate) ?
    Is the EclipseLink a free tool and no license fee?And yes, EclipseLink is an open source project so there are no license fees. However, Oracle does redistribute EclipseLink as part of the Oracle TopLink product and therefore customers are able to access support for EclipseLink through Oracle support.
    --Shaun                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Can i remove white sky and replace with another

    hi, im new to elements and photo editing, is there an easy to understand way of removing a whashed out white sky and replacing it with a blue/white cloud style of sky, i already have a donor sky.thanks for any advice given, ive got v7

    Make a selection of a segment of the donor sky with one of the selection tools
    Go Edit>copy
    Open the picture with the washed out sky
    Go to Edit>paste. This will put the donor selection on its own layer. Position it with the move tool over the old sky
    Set blend mode of this layer to darken
    Set foreground color chip (lower left) to white
    Drag foreground to transparent linear gradient from below up to top of tree line (if there are trees)
    With soft white brush, at reduced opacity, paint horizon on a new layer at top of stack. Horizon should be lighter than rest of sky..
    HTH

  • I want to store my ibook.  Can I take out the battery and simply not use it for months?

    Just bought a new imac and want to mothball the laptop.  Can I simply remove the battery and not use it?
    Do I have to recharge the battery every few months?
    Can't see the point in leaving it plugged in as its not being used, yet in case I need it as a back up would like to keep it.
    Any comments on proper procedure?
    thanks.

    From Apple:
    Storing Your MacBook Pro
    If you are going to store your MacBook Pro for an extended period of time, keep it in a cool location (ideally, 22° C or about 71° F) and do one of the following to preserve your MacBook Pro battery life:
    Discharge the battery 50 percent before storing your MacBook Pro.
    When storing your computer for longer than five months, discharge the battery to approximately 50 percent and then remove it from the MacBook Pro. If you are storing your computer for an extended period, recharge your battery to 50 percent every six months or so.

  • Can i take out the motherboard and CPU and replace it with a newer one?

    I was wondering if i could take out the CPU and Motherboard of an early 2011 13" macbook pro with a 2.3GHz dual core i5, and replace it with a 2012 2.9GHz 13" dual core i7? I don't care about the costs but i just want to know if it's possible? I've upgraded my computer to the max so far, but i need some more processing power and i think the new ivy bridge processors will do me some good. Thanks for any replies

    NOPE.
    I'm about 99.9% sure it won't fit.
    Plus the rest of the stuff won't plug or won't be compatible.

  • How do I cut out the vocals and keep the instrumentals

    I recorded a track and I just want to keep the instumentals and discard the vocals. Is there a way to break it down and just discard the vocals and keep the instrumentals?

    From a professionally recorded stereo recording (that's not what you originally said) you can possibly reduce the vocals
    http://www.thehangtime.com/gb/gbfaq2.html#removevocals
    A better option would be to find a MIDI file of the song you want.

  • I have a Time Capsule as my router.  I can connect wirelessly to the network and internet with my MBPr, but my Mac Mini will only connect to the network wired or wirelessly. Airport on it sees the internet as green, but will not connect.

    I have the Time Capsule hooked to a wireless modem.  It uses a static IP, which is put in and running.  The MBPr connects, as well as my iPhone 5, to the internet and network without problem.  I can see the Mac Mini, external drive attached to it, and the Time Capsule.  The Mac Mini connects to the network wired or wirelessly, but not to the internet.  On wireless, using AirPort the Internet shows green, but no connection when I open Safari.  The settings under network settings are identical except for LAN IP between the Mac Mini and the MBPr.  I was hoping someone might have an idea of what was going on.  Before I moved the Time Capsule was on Bridge mode from another router, now it is on DHCP and NAT for the internal network.

    No, its is connected direct to the providers fiber box.

  • I cannot update an app because I used a different ID when I purchased it and I have no record of it. How can I find out the ID and password

    I cannot update an App because I used  an ID and password  to purchase the APP that I no longer can retrieve. Is there anyway that I can find out that information ?

    Try here > Associating and verifying email addresses with your Apple ID
    And here > Is there a way to find my Apple ID Name if I can't remember it?
    Frequently Asked Questions About Apple ID

  • How can you find out if another VI running on the same computer and how can you find out the name of that VI?

    Suppose that several VIs running simultaneously on the same computer. How can I find out the names of the running VIs, from another VI?
    If the already running VIs are clones of the same basic VI, open and run with the option "Prepare to call and forget", how can I find out the names and index of each clone? 

    I had an application where I spawned (= ran with Start Asynchronous Call) multiple (reentrant) copies of VIs, and would occasionally "lose control" of them.  I needed a way to find all VIs that were running "Top Level" and stop them (so I didn't have to log off from Windows).
    I used the Application Property "All VIs in Memory" to get an array of (wait for it ...) All VIs in Memory.  I took each name, opened a VI reference to it (simply wire the name string in, as the VI is, by definition, "in memory"), looked at its VI Execution State, and if it was Run Top Level, Invoked the FP.Close and Abort VI Methods.  [To prevent the VI that did all this from "committing Suicide", I compared the name string with the current Call Chain, and did nothing if there was a match].
    I think you could adopt this idea to do what you need.
    BS

  • I'd like to print an 8x12 and cut it in half to make two 4x12 panorama type pictures.  Is there any way to combine two pictures (each cropped to 4x12) into one frame so I can print out the 8x12 and trim it after printing?

    I'd like to print an 8x12 and cut it in half to make two 4x12 panorama type pictures.  Is there any way to combine two pictures (each cropped to 4x12) into one frame so I can print out the 8x12 and trim it after printing?

    To clarify, I want to be able to make a flie I can take to a photo printing place (not for my own printer) so they can print it and I crop it.  The place I used to print at used to print an 8"x12" for the same price as 8"x10" (now they may only do 8x10 and I would need to keep the ratio the same so it would be two 3.3"x10" pics on an 8x10").  Any help is veryappreciated!

  • Need a little help simplifying an image so it can be cut out on a vinyl cutter

    Hi all, I'm after a bit of help.
    I'm wondering if I get hold on of say an image of a car, could I have this converted to black and white and then delete parts of it so that it can be cut out on a vinyl cutter?
    When converting it, I would like most of the image deleted but to keep the rough outlines and some shading etc so the image looks great and can be cut out on a cutter.
    I know I'm not explaining this too well but I hope you can understand what I mean.
    Many thanks,

    You might be in for quite a bit of work if you want to convert an image of a car to something that can be cut on a vinyl cutter and successfully turned into cut vinyl graphics. Not only do the resulting paths need to be clean, but all the line work must be large/thick enough in order to be successfully cut on the vinyl cutter and weeded by hand before applying release tape. Really thin line work can get chewed up by the plotter blade or it can get messed up when you're trying to weed away the negative vinyl areas of the cut graphics.
    The current live trace filter in Illustrator is not vinyl cutter friendly. The problem is it produces too many small objects that are too small to cut and it makes objects that are really stroked, open path segments. Vinyl cutting requires all of the paths to be closed. Sometimes I'll have better luck using the "Create Work Path" function in Photoshop for this sort of thing. Take a high contrast black and white or grayscale image, use the Color Range dialog box to create a selection and then use the Create Work Path command. It typically generates paths that are all closed. After that you do a little editing work to get rid of tiny objects too small to cut. Go to the File menu and select Export Paths to Illustrator.
    For the best results you have to digitize the paths by hand. It goes much faster if you have a graphics tablet.

  • How do you cut out the part of an image in a photo?

    How do you cut out a part of an image on a photo that you have added to Pages. For example, if I have added a picture of a giraffe to Pages how would I cut out the giraffe from the image and get rid of the rest of the image

    You can use the instant alpha tool to make the background transparent.
    FYI: Pages is part of iWork, not iLife.

  • Help! How can I take out the mini-disc stuck in mac?

    Help! How can I take out the mini-disc stuck in mac?
    I insert it into the mac, but the OS cannot load the disc and the disc cannot be ejected even i pressed the "eject" button.

    This happened to a family members macbookpro. A mini-cd inserted, couldn't be mounted or ejected by the drive.
    I cut a rectangle from a cereal box about two inches wide and 6 inches long. Abour an inch and half from one end in the middle I cut a notch and bent it down a little.
    I................I
    I................I
    I....I__I....I
    I................I
    I................I
    I................I
    I................I
    I................I
    I................I
    I................I
    I................I
    I................I
    I________I
    I then inserted it slowly into the drive notch down and slowly pulled out. I did this few times and caught the mimi-cd and removed it. The drive has worked flawlessly for several years
    A few days after this happened I was in BestBuy and an Apple rep was there displaying new Apple products. I asked him about it and he said they have a tool that ***** it out.

Maybe you are looking for

  • Extremely inconsistent font sizes--tiny on page and huge in textboxes

    Hello, I am running Firefox 23 on Slackware Linux. My computer is an ultrabook with an relatively small, high resolution screen, so I have had to set a high dpi (190) to get font sizes rendered appropriately. The value of 190 was obtained by calculat

  • Problem with h:selectOneRadio

    i would like to use selectOneRadio to change my log level in my application there are two problem: my operation modifierLevel is never called how to set a default value to my selectOneRadio (for example i would like to set a dfault value of my select

  • Buy VS Rent on Apple TV

    Okay so I have a huge question. Why am I paying retail prices for movies and getting horrible encoding. At least with a physical disc (which is the same price) I can rip it off at least with the 5.1 Surround Sound and with a MUCH MUCH better encoding

  • HT201359 If I by some of purches $9,90 AU ,you charge me $ 12,99 AU ,$3 more for what???? In my invoice no description

    Why you charge me $3 more for purches $9.90 AU to $12.99 AU on my invoice no description for additional charge,please explain ,becouse I can't see any tax or GST need to pay extra

  • My new payment method was not accepted

    I was warned that my payment method was due to expire so prompted to enter new details. I tried submitting details for business credit card and debit card but neither were accepted. Additional I moved from New Zealand to the UK but have recored this