Footage recording requirements for a 1080i 29.97fps final movie
hello everyone!
I am sure you will know better than me as this is a basic question...but need to confirm with more experienced editors...OK, so I need to deliver for a broadcaster a 1080i movie and they specify that "the field rate for both standard and high definition is 59.94 fields per second. The frame rate for high def is 29.97 frames per second".
so, 2 questions:
1) I know that this will be shot with a Sony Handycam HD AX-2000, and that shoots HD(not sure if 1080p or also 1080i?), but should I specify them they need to shot at 1080i and a certain frame rate? or is ok if they shot at 1080p? can i easily import progressive footage into an interlace sequence in final cut7?
2) "high definition is 59.94 fields per second": this has nothing to do with fps, correct? even if they shot at 60fps I can always export a QT 1080i at 29.97fps...I don't have to ask them speficically to shot at 59.94?
hope you can answer me these questions!! thanks everybody!
>o i just set up a 1080X1920 in fcp7 and by default is telling me it's a 1080i (HDTV), is this normal and should i ignore it?
No, you need to make sure that you have a field dominance set. That is what determines interlacing. 1080 is an interlaced format by default, but it can be 1080i but progressive. Sorry, confusing, but that's how it's labelled.
>Iread in other forums that fcp7 just calls it"interlaced" even if it is not when you import progressive footage as frame size 1920X1080....i just want to confirm that it will actually not be interlaced at all....as tehy want me to use a plugin called digital rebellion to convert my progressive to interlaced...
Correct. And that plugin is to be used IF you already exported a progressive file. If your sequence was progressive. You don't need it if your sequence is Interlaced, and has field dominance.
>Also, I shoudl set up the se for progressive as the "field dominance" as NONE, correct?
NO!! That makes it progressive.
Similar Messages
-
USB Recording - requirements for the external USB drive
What are the requirements for the external USB drive to be recognised by the TV?
I've tried two now, which can both be seen by the TV to show media, but neither are recognised by the TV to be used as USB Recording space.Hi,
I have a similar question.
I have a 40L6353 and I cannot seem to playback anything recorded onto USB.
I have tried a large 500 Gb Toshiba (USB powered) drive and 2 or 3 others such as an 8 Gb SanDisk and a smaller capacity non branded 500 Mb stick.
All of the above I have formatted in the TV. When I press record the pop-up staes that recording has started and when I press stop it asks me to confirm. When I go to the recorded list it shows the files but says that they are an unsupported file format!!
I can play videos and music transferred to another Toshiba 500 Gb drive by PC.
I have also tested the sticks and they pass the 2 on-screen tests and I believe when a stick is inserted I can pause live TV.
Does anyone have any ideas?
I have been trying to get this to work for over a week - if there is a fault I will need to go back to the vendor but I want to be sure it isn't operator error.
Thanks in advance.
Message was edited by: banzai -
SRV record required for sip communication?
I'm in the process of starting up a lync 2013 deployment while we have an existing OCS 2007 R1 environment running. I'm getting numerous errors and the Front end service won't start. Some errors report:
Cause: The Mediation Server service cannot communicate with the Front End Service over SIP due to network connectivity issues.
Currently in Lync 2013 I have A records and an alias as following pointing to a HLB VIP. All the following records are pointing to the same IP which is has all ports open.
Host
lyncpool01.domain.com
Alias (CNAME)
LyncDiscoverInternal.domain.com
A
meet.domain.com
A
dialin.domain.com
A
LyncAdmin.domain.com
Since I have an OCS 2007R1 environment running I can't use the same srv record for _sipinternalstls.ready.
I just got done running through the entire upgrade for everything including the BE DB. Stopped all services, ran the gui upgrade, broke the mirrored database and did the upgrade, reenabled it, etc.
So I verified my upgrade with my standard ed test environment and all version numbers look good now.
Still can't start services. RTCSRV failed to start within expected timeframe.
also:
Log Name: Lync Server
Source: LS Mediation Server
Date: 3/31/2014 3:27:31 PM
Event ID: 25053
Task Category: (1030)
Level: Error
Keywords: Classic
User: N/A
Computer: lvhlyncfe01.lvh.com
Description:
The description for Event ID 25053 from source LS Mediation Server cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
lyncpool01.lvh.com
False
Microsoft.Rtc.Signaling.ConnectionFailureException:Unable to establish a connection. ---> System.Net.Sockets.SocketException (0x80004005): No connection could be made because the target machine actively refused it 10.17.171.125:5061
at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
at Microsoft.Rtc.Internal.Sip.TcpTransport.OnConnected(Object arg)
--- End of inner exception stack trace ---
at Microsoft.Rtc.Signaling.SipAsyncResult2`1.ThrowIfFailed()
at Microsoft.Rtc.Signaling.SipAsyncResultBase2.EndAsyncOperation[TResult](Object owner, IAsyncResult result)
at Microsoft.RTC.MediationServerCore.PeriodicOptionsSender.FinishSendOptionMessage(IAsyncResult ar)
Detected at System.Environment.GetStackTrace(Exception e, Boolean needFileInfo)
at System.Environment.get_StackTrace()
at Microsoft.Rtc.Signaling.RealTimeException..ctor(String message, Exception innerException)
at Microsoft.Rtc.Signaling.ExceptionUtilities.TryMapS4Exception(Exception s4Exception, SecurityAssociationContext securityContext, Boolean isSipEndpoint, String traceId, Object parentObject, Object childObject, RealTimeException& ex)
at Microsoft.Rtc.Signaling.SipTransactionAsyncResult`1.ConnectionConnectCompleted(IAsyncResult result)
at Microsoft.Rtc.Signaling.SipAsyncResult2`1.MakeCallback()
at Microsoft.Rtc.Signaling.SipAsyncResult2`1.Complete(TEx ex, Boolean synchronousCompletion)
at Microsoft.Rtc.Signaling.RealTimeConnection.CompletePendingConnects(IEnumerable`1 results, RealTimeException exception)
at Microsoft.Rtc.Signaling.RealTimeConnection.<.ctor>b__1(SipConnection sender, Object reason)
at Microsoft.Rtc.Internal.Sip.SipConnection.FireDisconnectedEvent(Object reason)
at Microsoft.Rtc.Internal.Sip.SingleThreadedDispatcherQueue.DispatcherCallback(Object queue)
at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
at System.Threading.ThreadPoolWorkQueue.Dispatch()
The handle is invalid
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="LS Mediation Server" />
<EventID Qualifiers="50182">25053</EventID>
<Level>2</Level>
<Task>1030</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-03-31T19:27:31.000000000Z" />
<EventRecordID>1466</EventRecordID>
<Channel>Lync Server</Channel>
<Computer>lvhlyncfe01.lvh.com</Computer>
<Security />
</System>
<EventData>
<Data>lyncpool01.lvh.com</Data>
<Data>False</Data>
<Data>Microsoft.Rtc.Signaling.ConnectionFailureException:Unable to establish a connection. ---> System.Net.Sockets.SocketException (0x80004005): No connection could be made because the target machine actively refused it 10.17.171.125:5061
at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
at Microsoft.Rtc.Internal.Sip.TcpTransport.OnConnected(Object arg)
--- End of inner exception stack trace ---
at Microsoft.Rtc.Signaling.SipAsyncResult2`1.ThrowIfFailed()
at Microsoft.Rtc.Signaling.SipAsyncResultBase2.EndAsyncOperation[TResult](Object owner, IAsyncResult result)
at Microsoft.RTC.MediationServerCore.PeriodicOptionsSender.FinishSendOptionMessage(IAsyncResult ar)
Detected at System.Environment.GetStackTrace(Exception e, Boolean needFileInfo)
at System.Environment.get_StackTrace()
at Microsoft.Rtc.Signaling.RealTimeException..ctor(String message, Exception innerException)
at Microsoft.Rtc.Signaling.ExceptionUtilities.TryMapS4Exception(Exception s4Exception, SecurityAssociationContext securityContext, Boolean isSipEndpoint, String traceId, Object parentObject, Object childObject, RealTimeException& ex)
at Microsoft.Rtc.Signaling.SipTransactionAsyncResult`1.ConnectionConnectCompleted(IAsyncResult result)
at Microsoft.Rtc.Signaling.SipAsyncResult2`1.MakeCallback()
at Microsoft.Rtc.Signaling.SipAsyncResult2`1.Complete(TEx ex, Boolean synchronousCompletion)
at Microsoft.Rtc.Signaling.RealTimeConnection.CompletePendingConnects(IEnumerable`1 results, RealTimeException exception)
at Microsoft.Rtc.Signaling.RealTimeConnection.<.ctor>b__1(SipConnection sender, Object reason)
at Microsoft.Rtc.Internal.Sip.SipConnection.FireDisconnectedEvent(Object reason)
at Microsoft.Rtc.Internal.Sip.SingleThreadedDispatcherQueue.DispatcherCallback(Object queue)
at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
at System.Threading.ThreadPoolWorkQueue.Dispatch()</Data>
</EventData>
</Event> -
Requirement For Adding Extra page in Final Report
Hi,
I am generating a marketing report for the customer. All these reports will be 3-4 pages with last page.
For certain type of marketing code I need to add a last page for customer approval with some notes.I can not have it as a last page in the same flow as it may not print summary on last page.
How can I add extra page at the end of report based on conditions.
Regards
-AshutoshYou may create the last page as subtemplate and call it conditionally. Like
<?template:lastpage?>
All thee last page stuff goes here
<?end template?>
<?if: condition_to_have_the_last_page?>
<?call:lastpage?>
<?end if?> -
I am looking for help!
My planned workflow is as follows:
Footage recorded on Canon Rebel T3i ---> Edited on Final Cut Pro 6 (sequence compression is apparently H.264 according to the browser) ---> Compressed with Compressor (ver 3.0.5) in original 1920 x 1080, 24p format ---> Uploaded to Vimeo
I am now at the point where I am trying to find a Compressor setting that will create a compressed movie that looks somewhat similar to what I see in the canvas in Final Cut Pro 6. I have tried using the H.264, Apple ProRes 422(HQ), HD Uncompressed 8-bit, and XDCAM HD 1080p24 settings and in all cases, my movie plays back fine, however, the brightness/exposure seems to be hiked up a few stops and there is a substantial amount of noise in both the blacks and midtones that doesn't appear in FCP's canvas.
My compressed movie I wish to export is only intended for Vimeo (similar to Youtube). Is there a different setting I should be trying, or perhaps a way of downloading a more effective or current codec?? Any suggestions are greatly appreciated as it is very disappointing to see my movie degraded so much from its orginal quality.
Shaun MH.264. But the FCP Legacy (FCP 7 and earlier) Canvas and Viewer aren't color accurate. Not designed to be. Their purpose is to show you what you are doing, show you the footage so you can make editing decisions. For color accuracy, the ideal way, since this was designed with television and feature editing in mind, is to have an IO device like those AJA.com and DECKLINK.com make, and send the signal to an HDTV or broadcast monitor.
Apple has realized that more and more people are editing for the web and computers only, so they made it so that FCX's viewer IS color accurate. So...what that means is that currently, using what you have, you won't get things to match....they aren't designed to. So you can adjust for what happens when you export.
But a big issue is that you are editing H.264 in FCP native. FCP doesn't work with H.264 native well, all sorts of potential issues can arise. Sync issues, quality issues, the correct shot be exported, all sorts of things. FCP works best with the FCP editing codecs. What are they? They are found in the EASY SETUP list. But for HD, the most commonly used option is ProRes 422. There is a BIG problem that FCP Legacy will SEEM like it'll work with H.264 natively just fine...it doens't throw up any warnings. That is bad. Also something Apple fixed with FCX.
The fact that you are editing H.264, and trying to export H.264, might also lead to the footage being more off that it would if you edited ProREs 422, and exported H.264. Note...H.264 is a higher data rate codec, and easier for FCP to work with...but because it has a higher data rate, the file sizes are much higher than the original H.264. 5-6x larger. FCP 7 did have a way to import Canon 5D, 7D and T2i (needed a hack with the T2i) via Log and Transfer. But it doesn't work with the T3i...not even with that hack. Because FCP 7 was no longer updated after the T3i came out. It's 4 year old software, discontinued 2 years ago.
If you want to edit native, you need to look at Adobe Premiere Pro CC. It's interface is more accurate too. -
Hardware Requirement for Recording System Audio
Hi all. I want to record the system audio using Captivate,
but that function in my PC is disabled. I read all previous topic
regarding this problem and wonder what's the minimum requirement
for sound card or any related hardware to accomplish that need?
Thanks!Welcome to our community, LyreLu
There used to be an issue with RealTek hardware, but the
developers addressed that with a patch for Captivate 2. Captivate 3
shouldn't need anything special to work with that hardware.
As for system audio, it is my understanding that this issue
is one created by the hardware. You have a couple of options.
1. Obtain a small patch cable and connect it from the Speaker
out to the Mic or Line in line. Then record audio as it plays.
(I've done this with reasonably decent results)
2. Use software that overcomes the issue. One such product is
called FreeCorder. You may visit the download page using the link
below.
Click here to visit
the site
Cheers... Rick -
so we currently have three domain controllers set up, two of them on 2012r2 and one of them on 2008r2. prior to any of these domain controllers being added to the domain there was only one, running on 2003r2. the 2003r2 server was up and running when the
first 2012r2 was added and that's when running 'dcdiag /e /c /v' would yield an issue with "_ldap._tcp.9a5f3c17-e7ac-48f7-ab42-bf1ea621a6f5.domains._msdcs.cmedia.local" in the DNS portion of the diagnostics, specifically:
TEST: Records registration (RReg)
Network Adapter [00000010] Microsoft Hyper-V Network Adapter:
Error:
Missing SRV record at DNS server 192.168.22.4:
_ldap._tcp.9a5f3c17-e7ac-48f7-ab42-bf1ea621a6f5.domains._msdcs.cmedia.local
after adding the second 2012r2 to the domain, this issue is still there... adding the 2008r2 server to the domain and running BPA it gives the following:
Title:
This domain controller must register a DNS SRV resource record, which is required for replication to function correctly
Severity:
Error
Date:
7/3/2014 11:24:48 AM
Category:
Configuration
Issue:
The "DcByGuid" DNS service (SRV) resource record that advertises this server as an available domain controller in the domain and ensures correct replication is not registered. All domain controllers (but not RODCs) in the domain must register this record.
Impact:
Other member computers and domain controllers in the domain or forest will not be able to locate this domain controller. This domain controller will not be able to provide a full suite of services.
Resolution:
Ensure that "DcByGuid" is not configured in the "DnsAvoidRegisteredRecords" list, either through Group Policy or through the registry. Restart the Netlogon service. Verify that the DNS service (SRV) resource record "_ldap._tcp.9a5f3c17-e7ac-48f7-ab42-bf1ea621a6f5.domains._msdcs.cmedia.local", pointing to the local domain controller "CM-DC4-NY01.cmedia.local", is registered in DNS.
More information about this best practice and detailed resolution procedures: http://go.microsoft.com/fwlink/?LinkId=126968
I've tried scanning and then re-scanning every single entry in DNS Manager and do not see any reference to this specific GUID mentioned, nor do I see any other domain controllers referenced that should not be in there. The two 2012r2 and the 2008r2 domain
controllers are the only ones listed in DNS Manager... the 2003r2 mentioned earlier failed and was removed.Just to chime in, I noticed that you said you have one 2008 R2 DC, and two 2012 DCs.
I also noticed in the ipconfig /all that all DCs are pointint to themselves for DNS. We usually like to see them point to a partner, then itslelf as the second entry, w hether loopback or by its own IP.
Based on that, what I suggest to level the playing field by choosing the WIndows 2008 R2 DC as the first DNS on all DCs and only administer DNS using that DC. The reason I chose that is because of the least common denominator is what we rather use so we
don't invoke any new features in the newer 2012 DNS console that 2008 R2 may not understand. After that's done, on each DC run (and you can use a PowerShell window to run this):
Rename the system32\config\netlogon.dns and netlogon.dnb files by suffixing ".old" to the file.
ipconfig /registerdns
net stop netlogon
net start netlogon
Then re-run the dcdiag /e /c /v.
Post your results, please.
Ace Fekay
MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights.
I thought the DNS entries were supposed to be the other way around? point to themselves first and a partner as secondary? regardless, as requested, I've changed it to what you've prescribed where they point to the 2008r2 server as the primary with themselves
as the secondary. I've also followed the steps to what seems like refreshing the DNS? on each of the DCs. Here's the output from dcdiag /e /c /v
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
* Verifying that the local machine CM-DC1-NY01, is a Directory Server.
Home Server = CM-DC1-NY01
* Connecting to directory service on server CM-DC1-NY01.
* Identified AD Forest.
Collecting AD specific global data
* Collecting site info.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=cmedia,DC=local,LDAP_SCOPE_SUBTREE,(objectCategory
=ntDSSiteSettings),.......
The previous call succeeded
Iterating through the sites
Looking at base site object: CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=cmedia
,DC=local
Getting ISTG and options for the site
* Identifying all servers.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=cmedia,DC=local,LDAP_SCOPE_SUBTREE,(objectClass=nt
DSDsa),.......
The previous call succeeded....
The previous call succeeded
Iterating through the list of servers
Getting information for the server CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites
,CN=Configuration,DC=cmedia,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=CM-DC3-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites
,CN=Configuration,DC=cmedia,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=CM-DC4-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites
,CN=Configuration,DC=cmedia,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
* Identifying all NC cross-refs.
* Found 3 DC(s). Testing 3 of them.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\CM-DC1-NY01
Starting test: Connectivity
* Active Directory LDAP Services Check
Determining IP4 connectivity
* Active Directory RPC Services Check
......................... CM-DC1-NY01 passed test Connectivity
Testing server: Default-First-Site-Name\CM-DC3-NY01
Starting test: Connectivity
* Active Directory LDAP Services Check
Determining IP4 connectivity
* Active Directory RPC Services Check
......................... CM-DC3-NY01 passed test Connectivity
Testing server: Default-First-Site-Name\CM-DC4-NY01
Starting test: Connectivity
* Active Directory LDAP Services Check
Determining IP4 connectivity
* Active Directory RPC Services Check
......................... CM-DC4-NY01 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\CM-DC1-NY01
Starting test: Advertising
The DC CM-DC1-NY01 is advertising itself as a DC and having a DS.
The DC CM-DC1-NY01 is advertising as an LDAP server
The DC CM-DC1-NY01 is advertising as having a writeable directory
The DC CM-DC1-NY01 is advertising as a Key Distribution Center
The DC CM-DC1-NY01 is advertising as a time server
The DS CM-DC1-NY01 is advertising as a GC.
......................... CM-DC1-NY01 passed test Advertising
Starting test: CheckSecurityError
* Dr Auth: Beginning security errors check!
Found KDC CM-DC1-NY01 for domain cmedia.local in site Default-First-Site-Name
Checking machine account for DC CM-DC1-NY01 on DC CM-DC1-NY01.
* SPN found :LDAP/CM-DC1-NY01.cmedia.local/cmedia.local
* SPN found :LDAP/CM-DC1-NY01.cmedia.local
* SPN found :LDAP/CM-DC1-NY01
* SPN found :LDAP/CM-DC1-NY01.cmedia.local/cmedia
* SPN found :LDAP/a29d12f1-2869-44bf-8e43-adf7ddf33865._msdcs.cmedia.local
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/a29d12f1-2869-44bf-8e43-adf7ddf33865/cmedia.local
* SPN found :HOST/CM-DC1-NY01.cmedia.local/cmedia.local
* SPN found :HOST/CM-DC1-NY01.cmedia.local
* SPN found :HOST/CM-DC1-NY01
* SPN found :GC/CM-DC1-NY01.cmedia.local/cmedia.local
[CM-DC1-NY01] No security related replication errors were found on this DC! To target the connection to a
specific source DC use /ReplSource:<DC>.
......................... CM-DC1-NY01 passed test CheckSecurityError
Starting test: CutoffServers
* Configuration Topology Aliveness Check
* Analyzing the alive system replication topology for DC=ForestDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for DC=DomainDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
......................... CM-DC1-NY01 passed test CutoffServers
Starting test: FrsEvent
* The File Replication Service Event log test
......................... CM-DC1-NY01 passed test FrsEvent
Starting test: DFSREvent
The DFS Replication Event Log.
Skip the test because the server is running FRS.
......................... CM-DC1-NY01 passed test DFSREvent
Starting test: SysVolCheck
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... CM-DC1-NY01 passed test SysVolCheck
Starting test: FrsSysVol
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... CM-DC1-NY01 passed test FrsSysVol
Starting test: KccEvent
* The KCC Event log test
Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
......................... CM-DC1-NY01 passed test KccEvent
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
guration,DC=cmedia,DC=local
Role Domain Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
guration,DC=cmedia,DC=local
Role PDC Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
ation,DC=cmedia,DC=local
Role Rid Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
ation,DC=cmedia,DC=local
Role Infrastructure Update Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN
=Sites,CN=Configuration,DC=cmedia,DC=local
......................... CM-DC1-NY01 passed test KnowsOfRoleHolders
Starting test: MachineAccount
Checking machine account for DC CM-DC1-NY01 on DC CM-DC1-NY01.
* SPN found :LDAP/CM-DC1-NY01.cmedia.local/cmedia.local
* SPN found :LDAP/CM-DC1-NY01.cmedia.local
* SPN found :LDAP/CM-DC1-NY01
* SPN found :LDAP/CM-DC1-NY01.cmedia.local/cmedia
* SPN found :LDAP/a29d12f1-2869-44bf-8e43-adf7ddf33865._msdcs.cmedia.local
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/a29d12f1-2869-44bf-8e43-adf7ddf33865/cmedia.local
* SPN found :HOST/CM-DC1-NY01.cmedia.local/cmedia.local
* SPN found :HOST/CM-DC1-NY01.cmedia.local
* SPN found :HOST/CM-DC1-NY01
* SPN found :HOST/CM-DC1-NY01.cmedia.local/cmedia
* SPN found :GC/CM-DC1-NY01.cmedia.local/cmedia.local
......................... CM-DC1-NY01 passed test MachineAccount
Starting test: NCSecDesc
* Security Permissions check for all NC's on DC CM-DC1-NY01.
The forest is not ready for RODC. Will skip checking ERODC ACEs.
* Security Permissions Check for
DC=ForestDnsZones,DC=cmedia,DC=local
(NDNC,Version 3)
* Security Permissions Check for
DC=DomainDnsZones,DC=cmedia,DC=local
(NDNC,Version 3)
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=cmedia,DC=local
(Schema,Version 3)
* Security Permissions Check for
CN=Configuration,DC=cmedia,DC=local
(Configuration,Version 3)
* Security Permissions Check for
DC=cmedia,DC=local
(Domain,Version 3)
......................... CM-DC1-NY01 passed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
Verified share \\CM-DC1-NY01\netlogon
Verified share \\CM-DC1-NY01\sysvol
......................... CM-DC1-NY01 passed test NetLogons
Starting test: ObjectsReplicated
CM-DC1-NY01 is in domain DC=cmedia,DC=local
Checking for CN=CM-DC1-NY01,OU=Domain Controllers,DC=cmedia,DC=local in domain DC=cmedia,DC=local o
n 3 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuratio
n,DC=cmedia,DC=local in domain CN=Configuration,DC=cmedia,DC=local on 3 servers
Object is up-to-date on all servers.
......................... CM-DC1-NY01 passed test ObjectsReplicated
Starting test: OutboundSecureChannels
* The Outbound Secure Channels test
** Did not run Outbound Secure Channels test because /testdomain: was not entered
......................... CM-DC1-NY01 passed test OutboundSecureChannels
Starting test: Replications
* Replications Check
* Replication Latency Check
DC=ForestDnsZones,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=DomainDnsZones,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Schema,CN=Configuration,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Configuration,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
......................... CM-DC1-NY01 passed test Replications
Starting test: RidManager
* Available RID Pool for the Domain is 16109 to 1073741823
* CM-DC1-NY01.cmedia.local is the RID Master
* DsBind with RID Master was successful
* rIDAllocationPool is 4609 to 5108
* rIDPreviousAllocationPool is 4609 to 5108
* rIDNextRID: 4629
......................... CM-DC1-NY01 passed test RidManager
Starting test: Services
* Checking Service: EventSystem
* Checking Service: RpcSs
* Checking Service: NTDS
* Checking Service: DnsCache
* Checking Service: NtFrs
* Checking Service: IsmServ
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: w32time
* Checking Service: NETLOGON
......................... CM-DC1-NY01 passed test Services
Starting test: SystemLog
* The System Event log test
A warning event occurred. EventID: 0x0000002F
Time Generated: 07/08/2014 13:19:14
Event String:
Time Provider NtpClient: No valid response has been received from manually configured peer 0.ca.pool.ntp.org
after 8 attempts to contact it. This peer will be discarded as a time source and NtpClient will attempt to discover a n
ew peer with this DNS name. The error was: The peer is unreachable.
Found no errors in "System" Event log in the last 60 minutes.
......................... CM-DC1-NY01 passed test SystemLog
Starting test: Topology
* Configuration Topology Integrity Check
* Analyzing the connection topology for DC=ForestDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for DC=DomainDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
......................... CM-DC1-NY01 passed test Topology
Starting test: VerifyEnterpriseReferences
......................... CM-DC1-NY01 passed test VerifyEnterpriseReferences
Starting test: VerifyReferences
The system object reference (serverReference) CN=CM-DC1-NY01,OU=Domain Controllers,DC=cmedia,DC=local
and backlink on
CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=cmedia,DC=local are
correct.
The system object reference (serverReferenceBL)
CN=CM-DC1-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
C=local
and backlink on
CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chiefmed
ia,DC=local
are correct.
The system object reference (frsComputerReferenceBL)
CN=CM-DC1-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
C=local
and backlink on CN=CM-DC1-NY01,OU=Domain Controllers,DC=cmedia,DC=local are correct.
......................... CM-DC1-NY01 passed test VerifyReferences
Starting test: VerifyReplicas
......................... CM-DC1-NY01 passed test VerifyReplicas
Testing server: Default-First-Site-Name\CM-DC3-NY01
Starting test: Advertising
The DC CM-DC3-NY01 is advertising itself as a DC and having a DS.
The DC CM-DC3-NY01 is advertising as an LDAP server
The DC CM-DC3-NY01 is advertising as having a writeable directory
The DC CM-DC3-NY01 is advertising as a Key Distribution Center
The DC CM-DC3-NY01 is advertising as a time server
The DS CM-DC3-NY01 is advertising as a GC.
......................... CM-DC3-NY01 passed test Advertising
Starting test: CheckSecurityError
* Dr Auth: Beginning security errors check!
Found KDC CM-DC1-NY01 for domain cmedia.local in site Default-First-Site-Name
Checking machine account for DC CM-DC3-NY01 on DC CM-DC1-NY01.
* SPN found :LDAP/CM-DC3-NY01.cmedia.local/cmedia.local
* SPN found :LDAP/CM-DC3-NY01.cmedia.local
* SPN found :LDAP/CM-DC3-NY01
* SPN found :LDAP/CM-DC3-NY01.cmedia.local/cmedia
* SPN found :LDAP/5e9d1971-39ca-484c-922d-411c2364c96e._msdcs.cmedia.local
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/5e9d1971-39ca-484c-922d-411c2364c96e/cmedia.local
* SPN found :HOST/CM-DC3-NY01.cmedia.local/cmedia.local
* SPN found :HOST/CM-DC3-NY01.cmedia.local
* SPN found :HOST/CM-DC3-NY01
* SPN found :HOST/CM-DC3-NY01.cmedia.local/cmedia
* SPN found :GC/CM-DC3-NY01.cmedia.local/cmedia.local
Checking for CN=CM-DC3-NY01,OU=Domain Controllers,DC=cmedia,DC=local in domain DC=cmedia,DC=local o
n 2 servers
Object is up-to-date on all servers.
[CM-DC3-NY01] No security related replication errors were found on this DC! To target the connection to a
specific source DC use /ReplSource:<DC>.
......................... CM-DC3-NY01 passed test CheckSecurityError
Starting test: CutoffServers
* Configuration Topology Aliveness Check
* Analyzing the alive system replication topology for DC=ForestDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for DC=DomainDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
......................... CM-DC3-NY01 passed test CutoffServers
Starting test: FrsEvent
* The File Replication Service Event log test
......................... CM-DC3-NY01 passed test FrsEvent
Starting test: DFSREvent
The DFS Replication Event Log.
Skip the test because the server is running FRS.
......................... CM-DC3-NY01 passed test DFSREvent
Starting test: SysVolCheck
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... CM-DC3-NY01 passed test SysVolCheck
Starting test: FrsSysVol
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... CM-DC3-NY01 passed test FrsSysVol
Starting test: KccEvent
* The KCC Event log test
Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
......................... CM-DC3-NY01 passed test KccEvent
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
guration,DC=cmedia,DC=local
Role Domain Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
guration,DC=cmedia,DC=local
Role PDC Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
ation,DC=cmedia,DC=local
Role Rid Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
ation,DC=cmedia,DC=local
Role Infrastructure Update Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN
=Sites,CN=Configuration,DC=cmedia,DC=local
......................... CM-DC3-NY01 passed test KnowsOfRoleHolders
Starting test: MachineAccount
Checking machine account for DC CM-DC3-NY01 on DC CM-DC3-NY01.
* SPN found :LDAP/CM-DC3-NY01.cmedia.local/cmedia.local
* SPN found :LDAP/CM-DC3-NY01.cmedia.local
* SPN found :LDAP/CM-DC3-NY01
* SPN found :LDAP/CM-DC3-NY01.cmedia.local/cmedia
* SPN found :LDAP/5e9d1971-39ca-484c-922d-411c2364c96e._msdcs.cmedia.local
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/5e9d1971-39ca-484c-922d-411c2364c96e/cmedia.local
* SPN found :HOST/CM-DC3-NY01.cmedia.local/cmedia.local
* SPN found :HOST/CM-DC3-NY01.cmedia.local
* SPN found :HOST/CM-DC3-NY01
* SPN found :HOST/CM-DC3-NY01.cmedia.local/cmedia
* SPN found :GC/CM-DC3-NY01.cmedia.local/cmedia.local
......................... CM-DC3-NY01 passed test MachineAccount
Starting test: NCSecDesc
* Security Permissions check for all NC's on DC CM-DC3-NY01.
The forest is not ready for RODC. Will skip checking ERODC ACEs.
* Security Permissions Check for
DC=ForestDnsZones,DC=cmedia,DC=local
(NDNC,Version 3)
* Security Permissions Check for
DC=DomainDnsZones,DC=cmedia,DC=local
(NDNC,Version 3)
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=cmedia,DC=local
(Schema,Version 3)
* Security Permissions Check for
CN=Configuration,DC=cmedia,DC=local
(Configuration,Version 3)
* Security Permissions Check for
DC=cmedia,DC=local
(Domain,Version 3)
......................... CM-DC3-NY01 passed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
Verified share \\CM-DC3-NY01\netlogon
Verified share \\CM-DC3-NY01\sysvol
......................... CM-DC3-NY01 passed test NetLogons
Starting test: ObjectsReplicated
CM-DC3-NY01 is in domain DC=cmedia,DC=local
Checking for CN=CM-DC3-NY01,OU=Domain Controllers,DC=cmedia,DC=local in domain DC=cmedia,DC=local o
n 3 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=CM-DC3-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuratio
n,DC=cmedia,DC=local in domain CN=Configuration,DC=cmedia,DC=local on 3 servers
Object is up-to-date on all servers.
......................... CM-DC3-NY01 passed test ObjectsReplicated
Starting test: OutboundSecureChannels
* The Outbound Secure Channels test
** Did not run Outbound Secure Channels test because /testdomain: was not entered
......................... CM-DC3-NY01 passed test OutboundSecureChannels
Starting test: Replications
* Replications Check
* Replication Latency Check
DC=ForestDnsZones,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=DomainDnsZones,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Schema,CN=Configuration,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Configuration,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
......................... CM-DC3-NY01 passed test Replications
Starting test: RidManager
* Available RID Pool for the Domain is 16109 to 1073741823
* CM-DC1-NY01.cmedia.local is the RID Master
* DsBind with RID Master was successful
* rIDAllocationPool is 15109 to 15608
* rIDPreviousAllocationPool is 15109 to 15608
* rIDNextRID: 15110
......................... CM-DC3-NY01 passed test RidManager
Starting test: Services
* Checking Service: EventSystem
* Checking Service: RpcSs
* Checking Service: NTDS
* Checking Service: DnsCache
* Checking Service: NtFrs
* Checking Service: IsmServ
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: w32time
* Checking Service: NETLOGON
......................... CM-DC3-NY01 passed test Services
Starting test: SystemLog
* The System Event log test
Found no errors in "System" Event log in the last 60 minutes.
......................... CM-DC3-NY01 passed test SystemLog
Starting test: Topology
* Configuration Topology Integrity Check
* Analyzing the connection topology for DC=ForestDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for DC=DomainDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
......................... CM-DC3-NY01 passed test Topology
Starting test: VerifyEnterpriseReferences
......................... CM-DC3-NY01 passed test VerifyEnterpriseReferences
Starting test: VerifyReferences
The system object reference (serverReference) CN=CM-DC3-NY01,OU=Domain Controllers,DC=cmedia,DC=local
and backlink on
CN=CM-DC3-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=cmedia,DC=local are
correct.
The system object reference (serverReferenceBL)
CN=CM-DC3-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
C=local
and backlink on
CN=NTDS Settings,CN=CM-DC3-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chiefmed
ia,DC=local
are correct.
The system object reference (frsComputerReferenceBL)
CN=CM-DC3-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
C=local
and backlink on CN=CM-DC3-NY01,OU=Domain Controllers,DC=cmedia,DC=local are correct.
......................... CM-DC3-NY01 passed test VerifyReferences
Starting test: VerifyReplicas
......................... CM-DC3-NY01 passed test VerifyReplicas
Testing server: Default-First-Site-Name\CM-DC4-NY01
Starting test: Advertising
The DC CM-DC4-NY01 is advertising itself as a DC and having a DS.
The DC CM-DC4-NY01 is advertising as an LDAP server
The DC CM-DC4-NY01 is advertising as having a writeable directory
The DC CM-DC4-NY01 is advertising as a Key Distribution Center
The DC CM-DC4-NY01 is advertising as a time server
The DS CM-DC4-NY01 is advertising as a GC.
......................... CM-DC4-NY01 passed test Advertising
Starting test: CheckSecurityError
* Dr Auth: Beginning security errors check!
Found KDC CM-DC1-NY01 for domain cmedia.local in site Default-First-Site-Name
Checking machine account for DC CM-DC4-NY01 on DC CM-DC1-NY01.
* SPN found :LDAP/CM-DC4-NY01.cmedia.local/cmedia.local
* SPN found :LDAP/CM-DC4-NY01.cmedia.local
* SPN found :LDAP/CM-DC4-NY01
* SPN found :LDAP/CM-DC4-NY01.cmedia.local/cmedia
* SPN found :LDAP/37830012-1f10-43c9-a0ff-2a0e8a912187._msdcs.cmedia.local
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/37830012-1f10-43c9-a0ff-2a0e8a912187/cmedia.local
* SPN found :HOST/CM-DC4-NY01.cmedia.local/cmedia.local
* SPN found :HOST/CM-DC4-NY01.cmedia.local
* SPN found :HOST/CM-DC4-NY01
* SPN found :HOST/CM-DC4-NY01.cmedia.local/cmedia
* SPN found :GC/CM-DC4-NY01.cmedia.local/cmedia.local
Checking for CN=CM-DC4-NY01,OU=Domain Controllers,DC=cmedia,DC=local in domain DC=cmedia,DC=local o
n 2 servers
Object is up-to-date on all servers.
[CM-DC4-NY01] No security related replication errors were found on this DC! To target the connection to a
specific source DC use /ReplSource:<DC>.
......................... CM-DC4-NY01 passed test CheckSecurityError
Starting test: CutoffServers
* Configuration Topology Aliveness Check
* Analyzing the alive system replication topology for DC=ForestDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for DC=DomainDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
......................... CM-DC4-NY01 passed test CutoffServers
Starting test: FrsEvent
* The File Replication Service Event log test
......................... CM-DC4-NY01 passed test FrsEvent
Starting test: DFSREvent
The DFS Replication Event Log.
Skip the test because the server is running FRS.
......................... CM-DC4-NY01 passed test DFSREvent
Starting test: SysVolCheck
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... CM-DC4-NY01 passed test SysVolCheck
Starting test: FrsSysVol
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... CM-DC4-NY01 passed test FrsSysVol
Starting test: KccEvent
* The KCC Event log test
Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
......................... CM-DC4-NY01 passed test KccEvent
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
guration,DC=cmedia,DC=local
Role Domain Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
guration,DC=cmedia,DC=local
Role PDC Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
ation,DC=cmedia,DC=local
Role Rid Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
ation,DC=cmedia,DC=local
Role Infrastructure Update Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN
=Sites,CN=Configuration,DC=cmedia,DC=local
......................... CM-DC4-NY01 passed test KnowsOfRoleHolders
Starting test: MachineAccount
Checking machine account for DC CM-DC4-NY01 on DC CM-DC4-NY01.
* SPN found :LDAP/CM-DC4-NY01.cmedia.local/cmedia.local
* SPN found :LDAP/CM-DC4-NY01.cmedia.local
* SPN found :LDAP/CM-DC4-NY01
* SPN found :LDAP/CM-DC4-NY01.cmedia.local/cmedia
* SPN found :LDAP/37830012-1f10-43c9-a0ff-2a0e8a912187._msdcs.cmedia.local
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/37830012-1f10-43c9-a0ff-2a0e8a912187/cmedia.local
* SPN found :HOST/CM-DC4-NY01.cmedia.local/cmedia.local
* SPN found :HOST/CM-DC4-NY01.cmedia.local
* SPN found :HOST/CM-DC4-NY01
* SPN found :HOST/CM-DC4-NY01.cmedia.local/cmedia
* SPN found :GC/CM-DC4-NY01.cmedia.local/cmedia.local
......................... CM-DC4-NY01 passed test MachineAccount
Starting test: NCSecDesc
* Security Permissions check for all NC's on DC CM-DC4-NY01.
The forest is not ready for RODC. Will skip checking ERODC ACEs.
* Security Permissions Check for
DC=ForestDnsZones,DC=cmedia,DC=local
(NDNC,Version 3)
* Security Permissions Check for
DC=DomainDnsZones,DC=cmedia,DC=local
(NDNC,Version 3)
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=cmedia,DC=local
(Schema,Version 3)
* Security Permissions Check for
CN=Configuration,DC=cmedia,DC=local
(Configuration,Version 3)
* Security Permissions Check for
DC=cmedia,DC=local
(Domain,Version 3)
......................... CM-DC4-NY01 passed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
Verified share \\CM-DC4-NY01\netlogon
Verified share \\CM-DC4-NY01\sysvol
......................... CM-DC4-NY01 passed test NetLogons
Starting test: ObjectsReplicated
CM-DC4-NY01 is in domain DC=cmedia,DC=local
Checking for CN=CM-DC4-NY01,OU=Domain Controllers,DC=cmedia,DC=local in domain DC=cmedia,DC=local o
n 3 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=CM-DC4-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuratio
n,DC=cmedia,DC=local in domain CN=Configuration,DC=cmedia,DC=local on 3 servers
Object is up-to-date on all servers.
......................... CM-DC4-NY01 passed test ObjectsReplicated
Starting test: OutboundSecureChannels
* The Outbound Secure Channels test
** Did not run Outbound Secure Channels test because /testdomain: was not entered
......................... CM-DC4-NY01 passed test OutboundSecureChannels
Starting test: Replications
* Replications Check
* Replication Latency Check
DC=ForestDnsZones,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=DomainDnsZones,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Schema,CN=Configuration,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Configuration,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
......................... CM-DC4-NY01 passed test Replications
Starting test: RidManager
* Available RID Pool for the Domain is 16109 to 1073741823
* CM-DC1-NY01.cmedia.local is the RID Master
* DsBind with RID Master was successful
* rIDAllocationPool is 15609 to 16108
* rIDPreviousAllocationPool is 15609 to 16108
* rIDNextRID: 15609
......................... CM-DC4-NY01 passed test RidManager
Starting test: Services
* Checking Service: EventSystem
* Checking Service: RpcSs
* Checking Service: NTDS
* Checking Service: DnsCache
* Checking Service: NtFrs
* Checking Service: IsmServ
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: w32time
* Checking Service: NETLOGON
......................... CM-DC4-NY01 passed test Services
Starting test: SystemLog
* The System Event log test
Found no errors in "System" Event log in the last 60 minutes.
......................... CM-DC4-NY01 passed test SystemLog
Starting test: Topology
* Configuration Topology Integrity Check
* Analyzing the connection topology for DC=ForestDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for DC=DomainDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
......................... CM-DC4-NY01 passed test Topology
Starting test: VerifyEnterpriseReferences
......................... CM-DC4-NY01 passed test VerifyEnterpriseReferences
Starting test: VerifyReferences
The system object reference (serverReference) CN=CM-DC4-NY01,OU=Domain Controllers,DC=cmedia,DC=local
and backlink on
CN=CM-DC4-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=cmedia,DC=local are
correct.
The system object reference (serverReferenceBL)
CN=CM-DC4-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
C=local
and backlink on
CN=NTDS Settings,CN=CM-DC4-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chiefmed
ia,DC=local
are correct.
The system object reference (frsComputerReferenceBL)
CN=CM-DC4-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
C=local
and backlink on CN=CM-DC4-NY01,OU=Domain Controllers,DC=cmedia,DC=local are correct.
......................... CM-DC4-NY01 passed test VerifyReferences
Starting test: VerifyReplicas
......................... CM-DC4-NY01 passed test VerifyReplicas -
Anybody know why FCPX doesn't support footage recorded in 1080-60p form Panasonic Camcorder HDC-TM900???
I'm trying to decide on a new camcorder between the new yet to be released Panasonic HD-X900M and the Canon VIXIA HF G10. Currently have a Canon HV 20 which works great, but thought I'd upgrade to newer tech. Looking at the supported cameras list published by Apple, the newer Panasonic hasn't been tested yet so am unsure if it is the same as the previous model. I suspect it is. The newer Canon appears to be good, but spec. say it is only good up to 1080I. I'd rather have the progressive camera if it isn't that much of a hassle to convert the files.
Thanks for alll your info on this subject.
Dale -
What are the settings required for QM in procurement
Hi Team,
What are the settings required for QM in procurement. I have set indicator for QM in procurement in QM view in material master.
I am not clear about following fields to be maintained in QM view.
QM Control Key
Certificate type
Target QM system
Tech. delivery terms Indicator.
Please suggest me in which case to be used this fiels. Is it relivant to Quality Certificates.
ThanksHi,
All meaning are
QM Control Key :
If you activate the indicator for QM in procurement in the material master record at the client level, you must also store a control key at the plant level for quality management in procurement.
Certificate type :
Certificate types applies to the Certificate processing in procurement & Certificate creation
Target QM system :
whether the vendor's verified QM system, according to vendor master record or quality info-record (for a combination of vendor/material) meets the requirements for QM systems as specified in the material master
- If you activate the indicator for QM in procurement in the material master record at the client level, you must also store a control key at the plant level for quality management in procurement. If you want Procurment control then accordingly define Control Key.
- If you want Vendor's perticular certificate for Material then you have to define Certificate type.
Also, you have to maintain Material, Vendor's Info record at plant level.
Thanks,
JM -
List of Manual Setup required for iSetup to work
Hi All,
This is Mugunthan from iSetup development. Based on my interaction with customers and Oracle functional experts, I had documented list of manual setups that are required for smooth loading of selection sets. I am sharing the same. Please let me know if I anyone had to enter some manual setup while using iSetup.
Understanding iSetup
iSetup is a tool to migrate and report on your configuration data. Various engineering teams from Oracle develop the APIs/Programs, which migrates the data across EBS instances. Hence all your data is validated for all business cases and data consistency is guarantied. It requires good amount of setup functional knowledge and bit of technical knowledge to use this tool.
Prerequisite setup for Instance Mapping to work
· ATG patch set level should be same across all EBS instances.
· Copy DBC files of each other EBS instances participating in migration under $FND_SECURE directory (refer note below for details).
· Edit sqlnet.ora to allow connection between DB instacnes(tcp.invited_nodes=(<source>,<central>))
· Make sure that same user name with iSetup responsibility exists in all EBS instances participating in migration.
Note:- iSetup tool is capable of connecting to multiple EBS instances. To do so, it uses dbc file information available under $FND_SECURE directory. Let us consider three instances A, B & C, where A is central instance, B is source instance and C is target instances. After copying the dbc file on all nodes, $FND_SECURE directory would look like this on each machine.
A => A.dbc, B.dbc, C.dbc
B => A.dbc, B.dbc
C => A.dbc, C.dbc
Prerequisite for registering Interface and creating Custom Selection Set
iSetup super role is mandatory to register and create custom selection set. It is not sufficient if you register API on central/source instance alone. You must register the API on all instances participating in migration/reporting.
Understanding how to access/share extracts across instances
Sharing iSetup artifacts
· Only the exact same user can access extracts, transforms, or reports across different instances.
· The “Download” capability offers a way to share extracts, transforms, and loads.
Implications for Extract/Load Management
· Option 1: Same owner across all instances
· Option 2: Same owner in Dev, Test, UAT, etc – but not Production
o Extract/Load operations in non-Production instances
o Once thoroughly tested and ready to load into Production, download to desktop and upload into Production
· Option 3: Download and upload into each instance
Security Considerations
· iSetup does not use SSH to connect between instances. It uses Concurrent Manager framework to lunch concurrent programs on source and target instances.
· iSetup does not write password to any files or tables.
· It uses JDBC connectivity obtained through standard AOL security layer
Common Incorrect Setups
· Failure to complete/verify all of the steps in “Mapping instances”
· DBC file should be copied again if EBS instance has been refreshed or autoconfig is run.
· Custom interfaces should be registered in all EBS instances. Registering it on Central/Source is not sufficient.
· Standard Concurrent Manager should up for picking up iSetup concurrent requests.
· iSetup financial and SCM modules are supported from 12.0.4 onwards.
· iSetup is not certified on RAC. However, you may still work with iSetup if you could copy the DBC file on all nodes with the same name as it had been registered through Instance Mapping screen.
Installed Languages
iSetup has limitations where it cannot Load or Report if the number and type of installed languages and DB Charset are different between Central, Source and Target instances. If your case is so, there is a workaround. Download the extract zip file to desktop and unzip it. Edit AZ_Prevalidator_1.xml to match your target instance language and DB Charset. Zip it back and upload to iSetup repository. Now, you would be able to load to target instance. You must ensure that this would not corrupt data in DB. This is considered as customization and any data issue coming out this modification is not supported.
Custom Applications
Application data is the prerequisite for the most of the Application Object Library setups such as Menus, Responsibility, and Concurrent programs. iSetup does not migrate Custom Applications as of now. So, if you have created any custom application on source instance, please manually create them on the target instance before moving Application Object Library (AOL) data.
General Foundation Selection Set
Setup objects in General foundation selection set supports filtering i.e. ability to extract specific setups. Since most of the AOL setup data such as Menus, Responsibilities and Request Groups are shipped by Oracle itself, it does not make sense to migrate all of them to target instance since they would be available on target instance. Hence, it is strongly recommended to extract only those setup objects, which are edited/added, by you to target instance. This improves the performance. iSetup uses FNDLOAD (seed data loader) to migrate most of the AOL Setups. The default behavior of FNDLOAD is given below.
Case 1 – Shipped by Oracle (Seed Data)
FNDLOAD checks last_update_date and last_updated_by columns to update a record. If it is shipped by Oracle, the default owner of the record would be Oracle and it would skip these records, which are identical. So, it won’t change last_update_by or last_updated_date columns.
Case 2 – Shipped by Oracle and customized by you
If a record were customized in source instance, then it would update the record based on last_update_date column. If the last_update_date in the target were more recent, then FNDLOAD would not update the record. So, it won’t change last_update_by column. Otherwise, it would update the records with user who customized the records in source instance.
Case 3 – Created and maintained by customers
If a record were newly added/edited in source instance by you, then it would update the record based on last_update_date column. If the last_update_date of the record in the target were more recent, then FNDLOAD would not update the record. So, it won’t change last_update_by column. Otherwise, it would update the records with user who customized the records in source instance.
Profiles
HR: Business Group => Set the name of the Business Group for which you would like to extract data from source instance. After loading Business Group onto the target instance, make sure that this profile option is set appropriately.
HR: Security Profile => Set the name of the Business Group for which you would like to extract data from source instance. After loading Business Group onto the target instance, make sure that this profile option is set appropriately.
MO: Operating Unit => Set the Operating Unit name for which you would like to extract data from source instance. After loading Operating Unit onto the target instance, make sure that this profile option is set if required.
Navigation path to do the above setup:
System Administrator -> Profile -> System.
Query for the above profiles and set the values accordingly.
Descriptive & Key Flex Fields
You must compile and freeze the flex field values before extracting using iSetup.
Otherwise, it would result in partial migration of data. Please verify that all the data been extracted by reporting on your extract before loading to ensure data consistency.
You can load the KFF/DFF data to target instance even the structures in both source as well as target instances are different only in the below cases.
Case 1:
Source => Loc1 (Mandate), Loc2 (Mandate), Loc3, and Loc4
Target=> Loc1, Loc2, Loc3 (Mandate), Loc4, Loc5 and Loc6
If you provide values for Loc1 (Mandate), Loc2 (Mandate), Loc3, Loc4, then locations will be loaded to target instance without any issue. If you do not provide value for Loc3, then API will fail, as Loc3 is a mandatory field.
Case 2:
Source => Loc1 (Mandate), Loc2 (Mandate), Loc3, and Loc4
Target=> Loc1 (Mandate), Loc2
If you provide values for Loc1 (Mandate), Loc2 (Mandate), Loc3 and Loc4 and load data to target instance, API will fail as Loc3 and Loc4 are not there in target instance.
It is always recommended that KFF/DFF structure should be same for both source as well as target instances.
Concurrent Programs and Request Groups
Concurrent program API migrates the program definition(Definition + Parameters + Executable) only. It does not migrate physical executable files under APPL_TOP. Please use custom solution to migrate executable files. Load Concurrent Programs prior to loading Request Groups. Otherwise, associated concurrent program meta-data will not be moved even through the Request Group extract contains associated Concurrent Program definition.
Locations - Geographies
If you have any custom Geographies, iSetup does not have any API to migrate this setup. Enter them manually before loading Locations API.
Currencies Types
iSetup does not have API to migrate Currency types. Enter them manually on target instance after loading Currency API.
GL Fiscal Super user--> setup--> Currencies --> rates -- > types
Associating an Employee details to an User
The extract process does not capture employee details associated with users. So, after loading the employee data successfully on the target instance, you have to configure them again on target instance.
Accounting Setup
Make sure that all Accounting Setups that you wish to migrate are in status “Complete”. In progress or not-completed Accounting Setups would not be migrated successfully.
Note: Currently iSetup does not migrate Sub-Ledger Accounting methods (SLA). Oracle supports some default SLA methods such as Standard Accrual and Standard Cash. You may make use of these two. If you want to use your own SLA method then you need to manually create it on target instances because iSetup does not have API to migrate SLA. If a Primary Ledger associated with Secondary Ledgers using different Chart of Accounts, then mapping rules should be defined in the target instance manually. Mapping rule name should match with XML tag “SlCoaMappingName”. After that you would be able to load Accounting Setup to target instance.
Organization API - Product Foundation Selection Set
All Organizations which are defined in HR module will be extracted by this API. This API will not extract Inventory Organization, Business Group. To migrate Inventory Organization, you have to use Inventory Organization API under Discrete Mfg. and Distribution Selection Set. To extract Business Group, you should use Business Group API.
Inventory Organization API - Discrete Mfg & Distribution Selection Set
Inventory Organization API will extract Inventory Organization information only. You should use Inventory Parameters API to move parameters such as Accounting Information. Inventory Organization API Supports Update which means that you can update existing header level attributes of Inventory Organization on the target instance. Inventory Parameters API does not support update. To update Inventory Parameters, use Inventory Parameters Update API.
We have a known issue where Inventory Organization API migrates non process enabled organization only. If your inventory organization is process enabled, then you can migrate them by a simple workaround. Download the extract zip file to desktop and unzip it. Navigate to Organization XML and edit the XML tag <ProcessEnabledFlag>Y</ProcessEnabledFlag> to <ProcessEnabledFlag>N</ProcessEnabledFlag>. Zip it back the extract and upload to target instance. You can load the extract now. After successful completion of load, you can manually enable the flag through Form UI. We are working on this issue and update you once patch is released to metalink.
Freight Carriers API - Product Foundation Selection Set
Freight Carriers API in Product Foundation selection set requires Inventory Organization and Organization Parameters as prerequisite setup. These two APIs are available under Discrete Mfg. and Distribution Selection Set. Also,Freight Carriers API is available under Discrete Mfg and Distribution Selection Set with name Carriers, Methods, Carrier-ModeServ,Carrier-Org. So, use Discrete Mfg selection set to load Freight Carriers. In next rollup release Freight Carriers API would be removed from Product Foundation Selection Set.
Organization Structure Selection Set
It is highly recommended to set filter and extract and load data related to one Business Group at a time. For example, setup objects such as Locations, Legal Entities,Operating Units,Organizations and Organization Structure Versions support filter by Business Group. So, set the filter for a specific Business Group and then extract and load the data to target instance.
List of mandatory iSetup Fwk patches*
8352532:R12.AZ.A - 1OFF:12.0.6: Ignore invalid Java identifier or Unicode identifier characters from the extracted data
8424285:R12.AZ.A - 1OFF:12.0.6:Framework Support to validate records from details to master during load
7608712:R12.AZ.A - 1OFF:12.0.4:ISETUP DOES NOT MIGRATE SYSTEM PROFILE VALUES
List of mandatory API/functional patches*
8441573:R12.FND.A - 1OFF:12.0.4: FNDLOAD DOWNLOAD COMMAND IS INSERTING EXTRA SPACE AFTER A NEWLINE CHARACTER
7413966:R12.PER.A - MIGRATION ISSUES
8445446:R12.GL.A - Consolidated Patch for iSetup Fixes
7502698:R12.GL.A - Not able to Load Accounting Setup API Data to target instance.
Appendix_
How to read logs
· Logs are very important to diagnose and troubleshoot iSetup issues. Logs contain both functional and technical errors.
· To find the log, navigate to View Detail screens of Extracts/ Transforms/Loads/Standard/Comparison Reports and click on View Log button to view the log.
· Generic Loader (FNDLOAD or Seed data loader) logs are not printed as a part of main log. To view actual log, you have to take the request_id specified in the concurrent log and search for the same in Forms Request Search Window in the instance where the request was launched.
· Functional errors are mainly due to
o Missing prerequisite data – You did not load one more perquisite API before loading the current API. Example, trying to load “Accounting Setup” without loading “Chart of Accounts” would result in this kind of error.
o Business validation failure – Setup is incorrect as per business rule. Example, Start data cannot be greater than end date.
o API does not support Update Records – If the there is a matching record in the target instance and If the API does not support update, then you would get this kind of errors.
o You unselected Update Records while launching load - If the there is a matching record in the target instance and If you do not select Update Records, then you would get this kind of errors.
Example – business validation failure
o VONAME = Branches PLSQL; KEY = BANKNAME = 'AIBC‘
o BRANCHNAME = 'AIBC'
o EXCEPTION = Please provide a unique combination of bank number, bank branch number, and country combination. The 020, 26042, KA combination already exists.
Example – business validation failure
o Tokens: VONAME = Banks PLSQL
o BANKNAME = 'OLD_ROYAL BANK OF MY INDIA'
o EXCEPTION = End date cannot be earlier than the start date
Example – missing prerequisite data.
o VONAME = Operating Unit; KEY = Name = 'CAN OU'
o Group Name = 'Setup Business Group'
o ; EXCEPTION = Message not found. Application: PER, Message Name: HR_ORG_SOB_NOT_FOUND (Set of books not found for ‘Setup Business Group’)
Example – technical or fwk error
o OAException: System Error: Procedure at Step 40
o Cause: The procedure has created an error at Step 40.
o Action: Contact your system administrator quoting the procedure and Step 40.
Example – technical or fwk error
o Number of installed languages on source and target does not match.
Edited by: Mugunthan on Apr 24, 2009 2:45 PM
Edited by: Mugunthan on Apr 29, 2009 10:31 AM
Edited by: Mugunthan on Apr 30, 2009 10:15 AM
Edited by: Mugunthan on Apr 30, 2009 1:22 PM
Edited by: Mugunthan on Apr 30, 2009 1:28 PM
Edited by: Mugunthan on May 13, 2009 1:01 PMMugunthan
Yes we have applied 11i.AZ.H.2. I am getting several errors still that we trying to resolve
One of them is
===========>>>
Uploading snapshot to central instance failed, with 3 different messages
Error: An invalid status '-1' was passed to fnd_concurrent.set_completion_status. The valid statuses are: 'NORMAL', 'WARNING', 'ERROR'FND at oracle.apps.az.r12.util.XmlTransmorpher.<init>(XmlTransmorpher.java:301)
at oracle.apps.az.r12.extractor.cpserver.APIExtractor.insertGenericSelectionSet(APIExtractor.java:231)
please assist.
regards
girish -
If Excise invoice required for finished goods.
Hi All
I have doubt, whether excise invoice is required for finished goods or not. As I am trying to create MIGO doc for PO of finished material, and it is saying, no excise invoice possible for finished material RG1.
Can you advise please.
Regards
MuktaHI
Thanks for this. When we are executing Utilization transaction J2IU, it is giving dump after prompting popup with 'Data will be lost PLA NCCD B35', 'No record selected , excise invoice cancelled'.
Run time error is saying -
Short text
Structure-type conflict when calling a FORM
What happened?
Error in the ABAP Application Program
The current ABAP program "J_1IRUTZ" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
not caught and
therefore caused a runtime error.
The reason for the exception is:
The call of the FORM "DETERMINE_DEFAULT_VALUES" is incorrect:
The actual parameter no. 2 is at PERFORM not compatible with the
structure type requested by FORM "DETERMINE_DEFAULT_VALUES".
The FORM "DETERMINE_DEFAULT_VALUES" is defined in program "SAPMJ1II".
This error occurs in Unicode if the fragment view of the types is
incompatible.
Can some one suggest if we need to apply any OSS NOTE.
Regards
Mukta -
Lync 2013 certificate requirements for multiple SIP domains
Hi All,
I am engaged with a client in respect of a Lync 2013 implementation initially as a conferencing platform with a view to enabling EV functions (inc. PSTN conferencing) in the future. They initially need to support 30 SIP domains and eventually
around 100 SIP domains which is proving to be either not possible or severely cost prohibitive. Their current certificate provider, Thawte, can only support up to 25 SANs and have quoted them 5 figures. We tend to use GeoTrust as they are cheaper but they
appear to have a limit of 25 SANs. GoDaddy appear to support up to 100 SANs for a pretty reasonable cost. My questions are as follows:
Is there a way that I’m missing of reducing the number of SANs required on the Edge server?
Use aliases for access edge FQDNs - Supported by desktop client but not by other devices so not really workable
Don’t support XMPP federation therefore removing the need for domain name FQDNs for each SIP domain
Is there a way that I’m missing of reducing the number of SANs required on the Reverse Proxy server?
Friendly URL option 3 from this page:
http://technet.microsoft.com/en-us/library/gg398287.aspx
Client auto-configuration:
i.
Don’t support mobile client auto-configuration in which case no lyncdiscover.sipdomain1.com DNS records or SANs would be required.
ii.
Support mobile client auto-configuration over HTTP only in which case CNAME records are required for each SIP domain (lyncdiscover.sipdomain1.com, etc. pointing to lyncdiscover.designateddomain.com) but no SANs are required.
iii.
Support mobile client auto-configuration over HTTPS in which case DNS records are required for each SIP domain and a SAN entry for each SIP domains is also required. This is because a DNS CNAME to another domain is not supported over
HTTPS.
If the answer to 1 and/or 2 is no, are there certificate providers that support over 100 SANs?
How do certificate requirements differ when using the Lync 2013 hosting pack? I would think that this issue is something that a hosting provider would need to overcome.
Would the Lync 2013 Hosting Pack work for this customer? The customer uses SPLA licensing so I think is eligible to use the hosting pack but not 100% sure it will work in their environment given that client connections are supposed
to all come through the Edge where their tenants will be internal and also given the requirement for an ACP for PSTN conferencing.
Many thanks,Many thanks for the response.
I was already planning to use option 3 from the below page for simple URLs to cut down on SAN requirement.
http://technet.microsoft.com/en-us/library/gg398287.aspx
What are the security concerns for publishing autodiscover over port 80? I.e. Is this only used for the initial download of the discovery record and then HTTPS is used for authentication? This seems to be the case from the following note on the below page:
http://technet.microsoft.com/en-gb/library/hh690030.aspx
Mobile device clients do not support multiple Secure Sockets Layer (SSL) certificates from different domains. Therefore, CNAME redirection to different domains is not supported over HTTPS. For example, a DNS CNAME record for lyncdiscover.contoso.com that redirects
to an address of director.contoso.net is not supported over HTTPS.
In such a topology, a mobile device client needs to use HTTP for the first request, so that the CNAME redirection is resolved over HTTP. Subsequent requests then use HTTPS. To support this scenario, you need to configure your reverse proxy with a web publishing
rule for port 80 (HTTP).
For details, see "To create a web publishing rule for port 80" in Configuring the Reverse Proxy for Mobility. CNAME redirection to the same domain is supported over HTTPS. In this case, the destination domain's certificate covers the originating
domain.”
I don’t think SRV records for additional SIP domain access edge is a workable solution as this is not supported by some devices.
As per the below article:
http://blog.schertz.name/2012/07/lync-edge-server-best-practices/
“The recommended approach for external client Automatic Sign-In when supporting multiple SIP domains is to include a unique Access Edge FQDN for each domain name in the SAN field. This is no longer a requirement (it was in OCS) as it is possible to
create a DNS Service Locator Record (SRV) for each additional SIP domain yet have them all point back to the same original FQDN for the Access Edge service (e.g. sip.mslync.net).
This approach will trigger a security alert in Windows Lync clients which can be accepted by the user, but some other clients and devices are unable to connect when the Automatic Sign-In process returns a pair of SRV and Host (A) records which do not share
the same domain namespace. Thus it is still best practice to define a unique FQDN for each additional SIP domain and include that hostname in the external Edge certificate’s SAN field”.
===================
1. Basically the requirement is to initially provide Lync conferencing services (minus PSTN conferencing) to internal, external, federated and anonymous participants with a view to providing PSTN conferencing and therefore enterprise voice services later.
2. The customer currently supports close to 100 SMTP domains and wants to align their SIP domains with these existing domains. The structure of their business is such that “XXX IT Services” provide the IT infrastructure for a collection of companies who
fall under the XXX umbrella but are very much run as individual entities.
Question:
Would you agree that I’m going to need a SAN for every SIP domain’s access edge FQDN?
Thanks. -
Transfer of Requirements for Return Orders
Hi,
Please I need help on TOR management with Return Orders in SD.
I've already red all the threads realted to TOR and ATP but I couldn't find a solution. As we know TOR is dependent on the following data: reqts type, reqts class, checking group and schedule line category.
The reqts type and class are determined in the strategy group (material master - MRP3).
Now if I switch on Transfer of Requirements for Returns, at Schedule Line level and Reqts Class level, the result is that I can see requirements related to Returns in the availability check overview of Sales Orders (ATP count) but if I check in the requirements list (i.e. transaction MD04) these requirements related to Returns are not recorded. Why?
And also another point please: requirements generated from Return Orders, into ATP count are considered as normal Sales Orders (negative sign, reducing ATP quantity, when it should be the contrary because a goods receipt is expected).
Can you help me please on these 2 points (perhaps something related with Sales Document Category)?
Thank you very much
Kind Regards
API practically did a sample order / returns order to see your requirements and these are my observations
a)
If you create a standard sales order, then the availability check registers a minus sign with stock required in Rec./reqd qty field.
Once you save the sales order, this is not seen again as the total quantity is reduced by sales order quantity.
It was indicating a minus sign when you created a returns order because you checked the Transfer of requirements and availability check indicators in schedule line category.
It was simulating a requirement as you checked the indicators in schedule line category.
If you create returns order with standard DN (i.e. Transfer of requirements and availability check indicators are not checked), then you would not see any requirement for stock i.e. you don't see any new entry in availability overview screen.
b)
You are not seeing returned quantities in MD04 because of Movement types. This has nothing to do with Transfer of requirements.
Schedule line DN uses movement type 651.
Using movement type 651, you post returns from a customer with returns delivery to blocked stock returns.
The blocked stock returns are are neither valuated nor part of "unrestricted-use" stock.
Hence you are not seeing the returned stock in your available stock.
If you click the magnifying glass on total stock i.e. top line of your stock/requirements list (transaction MD04), you could see the returned quantity in 'Returns field'.
If you want to post returns from a customer with returns delivery directly to the valuated stock, you could use the following movement types in schedule line category.
653 Returns from customer to unrestricted-use stock
655 Returns from customer to stock in quality inspection
With these movement types, you could see returned quantities in stock/requirements list. -
Help Required for XSLT mapping
Hi Folks,
I am working on a scenario, where we had 17 different one to one mapping with same source strcture but different target structures. Source is a Idoc common for everyone.
Sample Target Structure :
Message Type(XYZ)
RECORDS(0,u)
A(0,1)
B(0,1)
C(0,1)
D(0,1)
As per our requirement we need the output in which we need to have "GLOBE " at the top and the value of A, B, C and D on single row for each ouurance of RECORD. For 2nd occurance we need to change the line and 2 nd set of ABCD on 2nd row and so on. e.g.
GLOBE
0002044452KNA1 0000027079 0001E
0002044452KNA1 0000027080 0001E
0002044452KNA1 0000027080 0001E
To acheive the above output we are using a XSLT map after Message Mapping
<?xml version="1.0" encoding="UTF-8" ?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:output method="text" indent="no" encoding="UTF-8" omit-xml-declaration="yes"/>
<xsl:preserve-space elements="*"/>
<xsl:template match="/">GLOBE<xsl:text>
</xsl:text>
<xsl:for-each select="//RECORDS">
<xsl:for-each select="*">
<xsl:value-of select="current()"/>
</xsl:for-each><xsl:text>
</xsl:text></xsl:for-each>
</xsl:template>
</xsl:stylesheet>
NOW WE HAVE changed the 17 one to one maps to one multi mapping (1:17) as our source is same.
Now as the output of this multi mapping is getting into XSL code, it is not able to parse it.
How can we do the changes in this particular code So that we can Achieve: 17 different file out of single multi mapping and XSL map like it was comming previously from 17 different maps.
Thanks
PradeepHi Pradeep,
Depending on how you setup your multi mapping, when you execute you will end up with something like this as the xml output:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
<XYZ></XYZ>
<XYZ></XYZ>
</ns0:Message1>
</ns0:Messages>
Or this:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
<XYZ></XYZ>
</ns0:Message1>
<ns0:Message2>
<XYZ></XYZ>
</ns0:Message2>
</ns0:Messages>
The single xml message with the u201CMessagesu201D wrapper is not split into separate messages until it hits one of the adapters in the adapter engine. Perhaps you can try to adjust the xslt to expect this as input, but the output would still need to be <ns0:Messages>. That might be what is causing the failure with your current xslt. Can the flat file conversion in the file adapter?
Thanks,
-Russ -
QM_LSMW BY RECORDING METHOD FOR QP01
Dear QM Experts,
1. I am doing LSMW by recording method for QP01 transaction code
2. I am facing one problem while recording in inspection characteristic screen
3. While saving another screen opens prompting to put inspection method, plant and version for inspection method.
4. This is not at all needed as per the requirement.
I removed default Plant for Inspection Method version, Version Number of the Inspection Method while recording LSMW in inspection characteristic screen. Still it is happening.
Surprisingly when we create inspection plan though QP01 it never asks for these things.
Any remedies?
Best Regards,
Thanks is advance
Anand RaoDo not use Recording for QP01.
There is a pragram named "RCPTRA01". It can be selected in step1 of lsmw>>Object Type and Import Method>> Standard Batch/Direct Imput>>Object 0240;Method 0000;Program RCPTRA01; Program Type B.
Then Step 2, define source structure. In fact you may go to step 4 to have a look at the structure of the target structure. It would be easy to copy that. The source structure would be as below, ZBI001 would be the top level and the others the same lever under ZBI001:
Source Structures
ZBI001 Transaction Header Record for Data Transfer of Routings
ZBIMPL Batch Input Structure for Allocation of Mat. to Task Lists
ZBIPKO Batch Input Structure for Task List Header
ZBIPPO Batch input structure for task list operation
ZBIPMK Inspection characteristics for batch input of task lists
In step 3, define source fields for source structure. For easy define, you may click "Object Overview">> Table to get the possible fields of the related structure, and then copy to Excel; after that, you may copy the fields directly from Excel to fields difining window in step 3.
Step 4, assign the source structures to target structures, the target structures are named the same as the source structures above, just without the letter "Z". For example, assign ZBIMPL to BIMPL, ZBIPKO to BIPKO, except ZBI001 is assigned to BI000 and BI001 as well.
Then Step 5, you may find there are RECTY and default settings are "00" "99" "01" "03" "09" "18" for BI000, BI001, BIMPL, BIPKO, BIPPO and BIPMK. Let alone "99" and imput these value to field "RECTY" in corresponding source structure fields
Then you may run auto field mapping in step 5, and make some values constant, like PLNTY=Q etc.
Then a problem with the profile under field "PROFIDNET". Run TCODE 'SPRO' to IMG>Quality Management>Quality Planning>Inspection Planning>General>Maintain Profiles for Default Values>Profile: default values plan/general. You may find there is a box named "Entry tool", tick that box, if not it is not possible to run QP01 in lsmw. And at the same time you may find the profile is 0000001. Key the value to field "PROFIDNET" and make the rule as constant.
For step 6 there is nothing to do
in Step 7, unlike other objects, you can use just one .txt file for uploading the inspection plan. When specy file, select "Data for Multiple Source Structures(Seq.file); Delimiter: Tabulator; File structure: Field order Matches source structure definition(as in Seq.file) I find not possible to put field names at start of file, so "Field Order Matching" is very important
Then how to prepare the file? We can accomplish this with 5 excel sheets
the fields orders for my customer is like this:
1)for RECTY 18(Inspection Charatristics):
MATNR RECTY MERKNR KURZTEXT VERWMERKM QPMK_ZAEH PMETHODE QMTB_WERKS STICHPRVER PROBEMGEH STELLEN MASSEINHSW SOLLWERT TOLERANZOB TOLERANZUN
2)for RECTY 09(Operation):
MATNR RECTY VORNR STEUS WERKS LTXA1 UMREZ UMREN
3)for RECTY 03(Header):
MATNR RECTY DATUV VERWE WERKS STATU PLNME LOSVN LOSBS VAGRP KTEXT
4)for RECTY 01(Allocation of Material)
MATNR RECTY MATNR WERKS LIFNR KUNR
5)for RECTY 00(Transaction Header)
MATNR RECTY TCODE START
Creat a new blank sheet and copy the fild contents of these 5 sheets into it, then you can sort the fields in A to Z order with Column A(MATNR), B(RECTY), and C(MERKNR), then the seq.file to be uploaded is completed.
for example:
10001042 00 QP01 20090119
10001042 01 10001042 1200
10001042 03 20090119 5 1200 4 PC 0 99999999 Screw\M16x45\GB/T5783
10001042 09 0010 QM01 1200 inspection 1 1
10001042 18 10 inspection on material C101 1200 JF035 1200 GUD5 PC
10001042 18 20 Inspection on size C102 1200 JF034 1200 GUD5 PC
Then copy start from Column B, i.e., without the material numbers in Column A, to .txt file.
Specy the file in Step 7 in lsmw.
the step 8, assign this .txt file to all structures
then step 9, 10, 11, 12, 13 Creast Session and run it in at the end.
Actually this program is not possible for QP02. If you want to make some correction on the inspection plans in SAP, you'd better delete them and upload the revised one.
This program is very similar to CA01 Production Routing and thus also applicable to CA01. But I recommend using Object 0170;Method 0002;Program RCPTRA02; Program Type D for CA01, because it provides testing transfer at the end so that you can check out logical errors, and much fastee. Pity that for QP01 there is no such program
Currenty I am acting as Data cunsultant for an Elevator Manufaturer in China, hope my experience would help for you. My MSN is zhangxiaojun at msn dot com
Maybe you are looking for
-
Exception stack trace while opening the file in JDevloper
Hi, When I want to open .jsp file from Application Navigator to Editor then this error appeared Exception stack trace: java.lang.NullPointerException at oracle.jdevimpl.webapp.design.util.InvisibleJspElementsUtil.applyInvisibleJSPElements(Invisi
-
RAM Upgrade - (2) 256's + (2) 512's?
All the research I have done into upgrading my RAM suggests matching what I already have. My question is, I currently have a dual 1.8 G5 with 512 RAM (2 256 sticks) -- in order to upgrade do I need to get another two 256 sticks to get to 1gb total, o
-
I have some problems and queries on Q10 ...
Good morning ... First, BBM very bad design, and the blue color of the broadcast very tired of the eye , and device does not vibrate when you work Ping!!! . Second, Android applications that are supported by BlackBerry 10 does not work well and often
-
Have trouble with apple tv i rest it more than 4 times and the screen stays black plz help
I don't know what genl it is too? help srtarted working then stoped tried to watch something and told me could not find content tried to restoring and didn't work screen stays black
-
Hi there, I have some CGI shots that were delivered to me in Quicktime Animation with Alpha that I need to edit and return to the client in a similar format (with transparency). Premiere CC views the clips with Alpha just fine. As soon as I try to ex