Footage: send to a usb hard drive without using my MBP?

Footage: send to a usb hard drive without using my MacBook Pro?
Is this possible?
Imagine shooting during a voyage, reviewing the footage in camera and download it to a portable usb hard drive without using a computer in order to format the card and shoot again.
I need to be very light travelling; so no Mac if possible.
My first post around a camera.
My first two weeks new 5DMII owner ,-) and I LOVE it. Still learning how to use it...
Thanks.
Regards to all.

No. You would need to be able to plug a USB drive into your 5D and transfer the footage. Your camera can't do that. Take your MBP with you. That's what laptops are for - portability.

Similar Messages

How to merge hard drives without using Disk Utility?

Hi,
Disk Utility has no visible 'Partition' tab when I click on a hard drive, so I am wondering if there is a way to merge my hard drives without using it?
A possible reason for the Partition tab not being visible is that my MacBook was set up by adminstrators at my school, and perhaps they have locked the hard drive so I cannot merge them.
Is there any way to get around that?
Thanks!

Yes, you cannot Partition a Partition, even if it's just one Partition, you must Partition the whole disk, which may erase all your data... I forget which version of OSX it changed to allow resizing Partitions.

Can you use the apple time capsule as just a wireless hard drive without using it as a router

Can i use the apple time capsule as just a wireless hard drive without using a router

You can, but this type of configuration is not recommended or supported by Apple.
Two cautions if you want to try this:
1) The Time Capsule has to be configured to "Join" your existing wireless network in this type of setup...and to do that, you must know the exact type of wireless security that your network is using.
2) Backups are going to take twice as long. The wireless signal must travel from your computer to the wireless router and then from the wireless router back to the Time Capsule. Two "hops"......even if the computer is located close to the Time Capsule.
If you want to try this, we can tell you how....but with no guarantees on your results....since this is not officially supported.

How do you fix bad blocks on an external hard drive without using disk utility

so basically does anyone know how to fix bad blocks on a external hard drive without using disk utlility please

Oh...if you have data you are trying to save then its best to try cloning the drive to another one, which should save its data as-is to another drive. Hopefully you can do so without there being hangups around the bad blocks and keep at least most of your data intact. I'd recommend you try using Carbon Copy Cloner to do this, but you will need a secondary drive that is at least the size of the data on the problematic drive.

How do i format a new hard drive without using an external drive

My hard drive crashed so i bought a new hard drive and have already placed it inside the macbook pro. i tried to use my install disks but nothing happens. i realized that i never formatted the new hard drive and started researching. i can not use my old hard drive since it is damaged so is there a way to format the new drive without using the old drive or an external hard drive?

Formatting, Partitioning Erasing a Hard Disk Drive
Warning! This procedure will destroy all data on your Hard Disk Drive. Be sure you have an up-to-date, tested backup of at least your Users folder and any third party applications you do not want to re-install before attempting this procedure.
• With compute rshut down insert install disk in optical drive.
• Hit Power buttonand immediately after chime hold down the "C" key.
• Select language
• Go to the Utilities menu and launch Disk Utility.
• Select your HDD (manufacturer ID) in left side bar.
• Select Partition tab in main panel. (You are about to create asingle partition volume.)
• Click on Options button
• Select GUID Partition Table(Intel Macs)
• Click OK
• Select number of partition in pull-down menu above Volumediagram.
(Note 1: One partition is normally preferable for an internalHDD.)
• Type in name in Name field (usually Macintosh HD)
• Select Volume Format as Mac OS Extended (Journaled)
• Click Partition button at bottom of panel.
• Select Erase tab
• Select the sub-volume (indented) under Manufacturer ID (usuallyMacintosh HD).
• Check to be sure your Volume Name and Volume Format are correct.
• Click Erase button
• Quit Disk Utility.
Open installer and begin installation process.
cornelius

Using toshiba canvio hard drive without using time machine

Has anyone used the Toshiba Canvio external hard drive to save files to without using time machine? I want to move files off of my computer onto the external drive not just duplicate all the files on my computer as a backup.

I guess the external drive is hanging off the Mac..
Getting access to the drive from PC should be possible.. you may need to move public directory onto the external drive and then set up permissions to do it.. I have not done it and simply would not do it.
External hdd are cheap enough buy one for the pc.. That is then formatted NTFS which windows is going to natively read.. this will be much easier if the backups are ever required than to use HFS+ formatted disk hanging off the Mac.
You can also get your dead TC fixed.
https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repairers

How can I back-up my photos that are in my iPhoto to an external hard drive without using the iPhoto structure.

I am attempting to back-up my entire MacBook Pro on an external hard drive before deleting everything from the MacBook Pro. Although I appreciate iPhotos photo structure and organization, I would prefer to back my photos up outside of the iPhotos structure, using “regular files” such as it appears in iPhoto’s “Masters” folder. However, I would like the Event names that are currently assigned to my iPhotos to remain attached to the photos. Is there a simple way to do any of this? Would this be a matter of somehow exporting each Event from my iPhoto? THANKS!

Terence Devlin wrote:
Stay away from the Masters folder. Rooting around in the Library package can damage the Library and is unnecessary and less useful than the supported way to so this.
Just export the them: File -> Export:
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue.
Remember that the Masters won't contain any of the changes that you made, only the files exactly as copied from the camera.
Thanks, Terence. As far as filenames go...does "Album Name and Number" work for keeping my Events together?

Can Time Capsule backup an Airport Extreme's attached USB hard drive?

Can Time Capsule backup an Airport Extreme's attached USB hard drive (without currently being attached to a MAC OSX LION system)?

No, sorry.. there is no way for the TC to see the files.. and even if you plug the hard disk into the TC there is no mechanism in the TC to drag the files to itself.. The TC is absolutely a dumb network attached drive.. everything you want to do must be done from a computer.

Can't format external USB hard drive

Hi Guys
I recently bought a Mac Pro, having decided to make the switch from PC, but am having trouble formatting an external 0.5 TB USB hard drive I used with the PC for use with the Mac. The drive was supplied formatted to Windows NTFS and when I first connected it to the Mac the blue LED indicator blinked off - presumably beacause OSX couldn't read the drive? Now, whenever I try to format the drive using disk utility I am presented with a message stating, "The underlying task reported failure on exit". If I try to partition the drive, I get a message stating, "Resource busy".
I am new to Macs and OSX, so imagine a lot of this problem is down to inexperience. I really need the external drive as I'm a musician, and store all my samples and projects on the drive.
Cheers, Dan

AFAIK, NTFS isn't a supported format for an ICBM (Intel-chip-based Mac). You need to remove any data files and reformat it MS-DOS or some such thing. Check Disk Utility's help files and http://docs.info.apple.com/article.html?artnum=303220
Since you're a newcomer to the Mac, you should peruse these before you do anything:
Switching from Windows to Mac OS X,
Basic Tutorials on using a Mac, and
MacTips Learning Centre.
Additionally, *Texas Mac Man* recommends:
Quick Assist.
Welcome to the Switch To A Mac Guides, and
A guide for switching to a Mac.

USB Hard Drives Mount via AEBS but are Empty/Blank

I just came home with a new AIrport Extreme Base Station, bought so I could access my USB hard drives anywhere in the house. Before setting out this morning I read on the AEBS product page that you could connect multiple drives or printers using a USB hub, so was quite pleased.
I got it home, plugged in the hub, connected the ethernet, and connected to the AEBS from my MacBook Pro. I configured it to share my EPSON printer and the two USB hard drives I use. They all show in the Airport Utility. Configured security, updated, and mounted my drives. And they do mount, both of them show under "shared" in Finder.
The only problem is: They are both BLANK. There are no folders or files showing on them whatsoever. I panicked and plugged them straight into my MBP, hoping the AEBS hadn't formatted them or something, but the files were there and okay. I plugged them back into the hub... And nothing.
I see lots of threads having to do with people who cannot mount their drives, but that's not my problem. They MOUNT fine, they just don't have any files on them. Can anyone help? If not, the AEBS goes back to the store.

UPDATE: I managed to gain access to my files by switching (within the AEBS settings) from user-based sharing to a simple drive password. Once I did that I was able to browse and use my USB hard drives over the airport.
However, I would like to use the account-based system, so I'm modifying my question and adding another.
1) Why can't I see my files on USB drives connected to the AEBS when I'm using user-based security?
2) When I change users on my MacBook Pro, the other users cannot access the drives connected to the AEBS. I've got one password set now, using drive security (and I also tried it using the AEBS password for security), but it only works on my account. On other accounts, the user is informed that the password is invalid, even though I know I'm typing it correctly.
Basically I either need to get the AEBS to share my drives, with files, using user-based security or convince it to allow other users in when I have drive or base station password security for the drives.
Any help... Much appreciated!

How to install a new hard drive without bootable disc/usb

Hi- my hard drive has totally failed and although I can get into disk utility it won't let me create images and keeps coming up with input/output errors when I try.
I don't have another mac to work from and have no discs whatsoever even for older OS versions
I've ordered a new hard drive(a seagate 750GB 7400rpm one) but how do I get mountain lion on the new hard drive without any discs? If I just put in my new hard drive will it come up with an option? I have a mid 2009 MBP if that helps

I have a mid 2009 MBP if that helps
Here is how it helps:
You need the Utilities from Recovery_HD. Your broken Mac can boot from a Thumb drive.
Use this article to download this Utility to copy the Recovery_HD from your older, working Mac to a minimum 1GB USB thumb drive:
OS X: About Recovery Disk Assistant
Then boot the new mac with the thumb drive by holding down Alt/Option, wait wait wait while it draws an Icon for each bootable Volume, choose the Recovery_HD, choose proceed arrow, and use Disk Utility to erase the drive and create GUID partition Map, 1 partition, Mac OS X Extended (journaled). Then install Mac OS X by download.

Airport Extreme Base Station Losing Connection To USB Hard Drive.

I bought a new 5th gen AEBS and installed it yesterday updating the firmware to latest version and enabling the 300mbps 5GHz access point.
I formatted a 2.5" USB hard drive to Mac OS Journaled and connected it via USB.
Last night I transferred GBs of data with no problems. However I copied my iTunes media over night, and this morning it stated that it lost connection to the drive.
I since cannot connect to the drive again without disconnecting the USB drive and reconnecting it.
This seems to be a common problem with no evident fixes. Has anyone got a reliable connection out of this device?
I was using a MacBook Pro 2010 on SL.
If not then I suppose I might send this back and get a dedicated NAS.

I just found this thread - I am not sure the energy saver option will apply to non 'local' hard drives, i.e. the hard drive connected to the AEBS.
https://discussions.apple.com/thread/3616812

How to restore machine using a TM backup on a usb hard drive from older imac to a brand new iMac?

My imac (the one that had a superdrive in it), had a broken superdrive and was sent for repair. Whilst being "repaired" the screen was broken. I now have a brand new imac albeit without a dvd drive. My question is how to I restore my the old TM back up which had been made to an external usb hard drive to the new imac. Help files say that I should not restore from a TM file to a different machine and that I should use migration assistant. Whilst I can see the external usb drive in TM it is not being recognised in Migration assistant when I click on back up from a TM backup on another machine or disk.
Any ideas?
Just noticed that this new machine is running OSX 10.8.4 the broken imac was on mavericks

This is very simple first run Software Update on the new machine and get your machine upgraded to the most recent version of Mountain Lion 10.8.5. Install all other software updates Apple recommends in Software Update. Then care fully read Pondini's guide on using Migration Assistant located at:
http://pondini.org/OSX/MigrateLion.html
Your migrated data will be in a new account, to access it log into the new account.
Also DO NOT repeat DO NOTuse Wi-Fi to migrate data, if your TM backup drive uses USB, then connect it via USB and follow the on-screen instructions as described in Pondini's guide.

External USB hard drive not being recognized

Hello! I'm sure this has been posted before, but excuse my naivety with this sort of thing...
I have a mac mini 10.5.6 (1.83 GHz Intel Core 2 Duo) and I run the Time Machine function to an external usb hard drive. The hard drive worked fine (plugged into the usb port on an older keyboard), but I went out and bought a new aluminum apple keyboard (because they look so cool ^_^ ) - I plugged the external usb drive into the keyboard and it wasn't recognized, so I tried plugging the external drive directly into the mac mini, but it is still not recognized. It is not showing up in Disk Utility or in System Profiler
Help? I'd hate to have to give up this fancy keyboard...
Thank you!
Dr. E

I believe I had my external drive plugged into the (old) keyboard because with the old mac that I had didn't have a free usb port for it - so when I got the mini I just plugged things back in where they were. But I have always had the Time Machine back up to this drive (connected to the keyboard) though it has been slow (another reason I thought the new keyboard was a good idea).
I tried restarting the computer without the alu keyboard plugged in, but same problem of no drive showing up.
Here is what System Profiler has to say about my drive:
USB2.0 Storage Device:
Capacity: 93.16 GB
Removable Media: Yes
Detachable Drive: Yes
BSD Name: disk1
Product ID: 0x6830
Vendor ID: 0x04b4 (Cypress Semiconductor)
Version: 0.01
Serial Number: DEF107920F07
Speed: Up to 12 Mb/sec
Manufacturer: Cypress Semiconductor
Location ID: 0x3d130000
Current Available (mA): 100
Current Required (mA): 0
Mac OS 9 Drivers: No
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Not Supported
Volumes:
USB:
Capacity: 92.84 GB
Available: 53.14 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s2
Mount Point: /Volumes/USB
I don't know the brand or model as it has 'always' been in the case that in which it currently resides and I didn't physically buy the thing :\ I do know that no software was installed with the drive as I assumed that when I put all the old info from the original mac to the mini that it was the sort of thing that would carry over.
Sorry I'm not terribly helpful - Thank you!
Dr. E

USB Hard Drives Keep Disconnecting or Not Responding

Hi,
This is a long post - but one that I hope someone can offer advice on.
The Hardware
Mac Pro running OSX 10.8 (but this has happened on all versions of the OS i.e. 10.6/.7 etc)
3 x Internal SATA Hard Drives - All working perfectly.
External Drives:
2 x Western Digital My Book 1TB USB Hard Drives
1 x Seagate 750GB Hard Drive with USB2 connectivity
2 x IcyBox Dual Bay USB2 hard Drive enclosures using JMicron Chipsets - these enclosures have 2 x 1TB Western Digital Green in each (totaling 4 TB across the 2 enclosures).
D-Link 7 Port USB2 Hub
The Problem
- USB Hard Drives connected to the Mac are ejected from the system without notice and at random times AND/OR
- The external hard drive remains mounted, but when trying to write to the drive/partitions, Finder throws an error message up saying the operation cannot be completed - error code -50.
- Time Machine: TM will back up successfully several times, before eventually throwing an error up that it cannot create the folders required on the drive.
- The only way to be able to use the drives again is either remount the drive, or in some case, it is required to completely power the drive down and then reconnect.
Re-creating the problem
I have honestly not found a sure-fire way of replicating the problem. It seems completely random. It happens when I am actually sat at the computer, but it also happens when I am away from the computer.
In the past - my Time Machine hard drive has been one of the Western Digital MyBook drives. I also used the second MyBook for SuperDuper backups (extra redundancy). The 4TB drives in the IcyBox enclosures have been used to backup my ripped movie collection.
Recently however - I decided to have 2 of the 1TB drives in the IcyBox enclosures to be TM and SuperDuper backups. I have however reverted TM back to one of the Western Digital drives, purely for testing purposes. SuperDuper is backing up to one of the 1TB drives in the IcyBox.
I am trying various things to see if I can find the issue, but it is such a random event that it is taking ages to even come close to find a problem. Sometimes the drives will stay active for a few days, sometimes only a few hours, even minutes.
Theories
I have several theories as to why my USB drives continually disconnect.
1. The D-Link USB Hub.
Could connecting the drives through the hub be causing the problem? I don't really see how, unless it is a documented case that D-Link USB hubs do not play nice with OSX? To try and rule this out I have connected the current Time Machine back up drive (Western Digital MyBook) directly to the USB port on the back of the computer. The SuperDuper (IcyBox enclosure) drive is currently connected through the D-Link hub. I have removed all the other drives from the enclosures - so at present I have only 2 external drives connected (1 x 1TB Western Digital MyBook, 1 x 1TB Western Digital Green inside one of the IcyBox dual-bay enclosures - connected through D-Link Hub).
2. JMicron Chipset
I have done a bit of research on the internet and there are a few indications that perhaps JMicron SATA-to-USB controller chipsets found in a lot of external hard drive enclosures (including the dual bay IcyBox external enclosures that I have) do not play nice with OSX. If the JMicron chipsets in the 2 IcyBox enclosures is a problem - would that cause issues with other USB devices on the USB bus off the Mac? (i.e. can the JMicron chipset in the enclosures cause devices such as the WD MyBook drives which I assume use a non-JMicron chipset, to experience similar failures?)
3. Green Hard Drives
As I have said, I have 4 Western Digital Green 1TB hard drives inside the IcyBox Dual Bay Enclosures. Could the fact that these drives are 'Green' be causing a problem? They do go to sleep after x number of minutes, but they do wake up when required. But could on the occasion when I have problems, could this be caused by the 'Green' feature interrupting OSX in waking the drives? Coupled with JMicron chipset, could this be compounding the issue?
Possible Solutions
I am prepared to spend money on replacement drives and/or enclosures etc - but I would hate to spend x amount of money and have the same problem. So I am hoping to get some advice on what drives/enclosures are more than likely to work flawlessly with OSX.
Thanks for reading!

FYI - re: the SuperDuper drive that is in one of the IcyBox enclosures.
I just opened this drive up in Finder. I heard the drive wake up, but when I came to copy a file over (tried various file sizes) - I got the error -50 message.
Here is the info from Console.
31/07/2012 23:35:52.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:52.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.320 fseventsd[55]: disk logger: failed to open output file /Volumes/Data 1/.fseventsd/0000000002478a7f (No such file or directory). mount point /Volumes/Data 1/.fseventsd
31/07/2012 23:35:53.320 fseventsd[55]: disk logger: failed to open output file /Volumes/Data 1/.fseventsd/0000000002478a7f (No such file or directory). mount point /Volumes/Data 1/.fseventsd
Also, while the drive was inaccessible, I tried 'Verify Disk' in Disk Utility - here are the results
Verifying volume “SuperDuper”
Checking file systemPerforming live verification.
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Checking multi-linked files.
Checking catalog hierarchy.
Checking extended attributes file.
Invalid leaf record count
(It should be 2 instead of 1)
Checking volume bitmap.
Checking volume information.
The volume SuperDuper was found corrupt and needs to be repaired.
Error: This disk needs to be repaired. Click Repair Disk.
Please also note that the all my external hard drives have recently been reformated using GUID part. map and HFS Journaled.

Footage: send to a usb hard drive without using my MBP?

Similar Messages

Maybe you are looking for