Footer extends longer in Preview Mode then in Design Mode

I have attached two JPEGS that show my footer in "Design" mode and in "Preview" mode. 
In "Design" mode the footer is perfect.  It is the size and distance it needs to be at.  However, when viewing it in "Preview Mode", the footer extends downward farther then it should.  I've looked all over the page to see if there was something from another graphic or image or shape that could be extending downward and I don't see anything. 
Take a look at both images and tell me why this is happening?  I did have a lightbox gallary on this page.  I thought that the gallery was extending it downward so I removed it to test my theory.  Even after removing it, it still does not work the way it should.
Craig
Message was edited by: MUSE Worker

Like Vikas said:
Check if you have Sticky Footer enabled:
File > Site Properties
Page > Page Properties (for master and child pages)
Let me know if neither of those work, it could be that you just need to preview in browser to see what the true height will be in the footer.
Hope this helps!
Julia

Similar Messages

  • Adobe Muse Footer not full width in preview mode?

    Hi, I originally had my footer 100% width when previewing in browser and preview mode, and now for some reason it is not 100% width. Not sure what I have done for this to occur and it doesnt make it any easier when in design mode it is 100% width. Any help much appreciated.

    Just answered my own question, bounding box was not quite out to full browser width. To ensure it goes out to the full width keep dragging across until the guides turn red. I must of bumped it when I went in the masters page to do something and it was out by just a bees dick! Unreal....2 hrs of my life I wont get back haha :-)
    PS...Do I get 10 points for answering my own question? ;-)

  • White Bar under my footer whilst in preview mode

    i have been having some issues in preview mode with my site there is white bar under my footer and im clueless about how to correct it ive tried everything i can think of to rearranging the guides to altering the page properties its fine in design mode and everything appears as it should be anyone got any advice?

    Thanks for replying so quickly ive checked what you have mentioned and it appears there is no transparent objects in the footer. Heres how it looks in design mode

  • The type inside the footer drops down 50 px below the bottom of page in preview mode. I already tried unchecking the sticky footer in the site properties for that master page.

    I need to fix this footer text on the home page. The type on the master page is centered inside a white 50px box. But in preview mode, the line of text drops 50px down below the bottom of page. I unchecked the sticky footer in the site properties and also set the line of text as footer item. The setting was the same on my second master and it comes out fine.

    Hi
    The "content" div is styled to have 100px height and visible overflow. So the text is overflowing the div but the footer is  "unaware" / ingoring it and positions itself after "sidebar2"
    Change the height of "content" to 100% and it should work.
    Kind Regards,
    Alex

  • Masters not applying to pages, discrepancy between design and preview mode

    Hi there,
    I am having a crazy time with Muse, please please help me... I see some of you have looked at the post, but no help yet. Please don't let me down. SOOO confused!
    1) Master pages are not fully applying to the pages I assign, only parts of them.
    Above you can see that the sub-pages and the "WORK" page all have the C-Master applied to them, but then you look at one of those pages and not all of the features are there.
    Above is the C-Master page
    Above is one of those sub-pages (coffee tables) with the C-master applied, yet the navigation menu is missing!?!?
    2) Also the formatting is completely on the third image is completely wrong. There is extra space at the bottom of the page and yet I cannot move the page toggles to be the same as it is on the master. These formatting/margin/page size issues run throughout my pages and I cannot get them to all be the same! HELP!
    3) The page looks different in the design mode than it does in the preview mode.
    I am so confused and have gone through this from scratch once before thinking I did something wrong but I have had the same result.
    Please help me!!!
    Thank you!!
    - Carly

    Hi Parikshit,
    The sticky footer sounded promising, but it didn't change anything. I still can't move those bottom toggles to be at the desired ruler mark.
    As for the margins... Its my understanding that whatever you have in a master page will be applied to the pages you assign, but the content and spacing is different. There is no content that would push the page to extend further down, which I have seen done before. And because I cannot individually move the toggles I have no way of adjusting the spacing. I am going for a seamless look between pages, where the size and content of the page remains the same while the images in my portfolio change.
    Even if I go to Page > Page Properies and try to enter the correct numbers, it still doesn't affect the page.
    Does that clarify?
    Also, I am running 7.1 on a Mac OS 10.9...does that have something to do with it?
    Thank you so much for responding!
    - Carly

  • Xcelsius 2008 - Unable to preview changes made in design mode

    Xcelsius 2008 - Unable to preview changes made in design mode
    I have installed Xcelsius 2008 (RTM) and also Service Pack 1 / Fix Pack 1.1.  Unfortunately, I can now not preview changes I made in design mode (but can see the change in design mode).  In addition, if I save the changes made to the Excel spreadsheet (using this as the datasource) and then exit out of the application, then go back in, the changes have not been saved?!
    I have also installed Fix Pack 1.3, but the same issues occurs.
    This is causing us issues as we have developed a number of dashboards that can no longer be updated.
    Please could someone advise?
    Many thanks,
    Neil.

    I would recommend decomposing large sets into more manageable sets.  For instance, if you have data for a very large regional district, decompose the data into smaller sets for sub-districts.
    As for a paper, I'm not sure, but the main determinant of performance is how many cells you bind to the component.  For a typical component on a typical computer, I'd recommend no more than 9000 cells.  On a weaker computer less, on a stronger computer more.

  • Encore chapter markers off / different when playing DVD and when watching in Preview mode

    I'm using CS6 and Encore version 6.0.0
    I have a 120 min project with about 17 chapter markers. The markers were set to a older version of the project and then I extended the project by about 5 min and did a Replace Asset in the timeline. I adjusted the markers in the timeline. When I view the project in the Preview mode the chapters markers start at the right place but then I burn to DVD and they are off by about a minute.
    I've tried deleting the cache and buring again but it's still off.
    I think doing the Replace Asset messed things up but when it plays fine in Preview but not on the DVD something is really wrong.
    Thanks

    Update: I removed everything from the timeline and started over and entered the chapter markers. They are still off and now it's worse.
    I have 21 chapters. 6-10 are off the rest are ok. I am burning to a dual layer DVD but I don't think that would be the reason.
    Lastly, the DVD player skips over the final chapter it goes from 20 to the begining of the movie skipping Chapter 21.
    What the heck?!

  • Presenter hung up in Preview mode

    I have a Presenter 9 project that no longer works in preview mode.  It did, and now it just hangs and keeps spinning.  When I publish it, the same thing happens, it just spins.  However, when I upload to a cloud server, it works, but none of the videos play.  Any settings I can check, or can I get assistance in troubleshooting this issue?  Thanks!

    Hello,
    Do you have collaboration configured in your project?
    If yes, so solve this issue, please google for "flash security settings". In the search result, click on first link and select "always allow" >> then click "Edit location" >> then on "Add location" >> then add "C:\" as the location and "confirm"
    Restart your broswer.
    Now please check.
    If the issue is occuring even if "collboration" is not configured, then we need to investigate. Please "package" the presentation and send it to us at [email protected]
    We will check it and let you know the solution.
    Regards,
    Mukul
    Adobe Presenter Engg. Team.

  • Gif file won't animate in Muse's preview mode or in Muse's view in browser mode

    Created a gif file with Photoshop that's 7.5MB in size.  Placed the gif  file on a Muse page.  But, the gif won't animate in Muse's preview mode or when Muse sends the page to be viewed in browser mode.  I'm using a Mac running OS X 10.9.2 and I'm a creative cloud member using Muse.  Any solutions?

    Step one to enable the community to help debug what you're encountering would be to provide the URL for the page where the GIF is being used. My first guess would be there are effects applied to the image (i.e. inner glow, bevel, etc.) that require Muse to re-encode the image and Muse does not support encoding animated .gif. It only supports passing animated .gif files through unchanged. (And to get an image to pass through unchanged it needs to have no effects that require rasterization applied in Muse.)
    Given you've stated the GIF file is 7.5Mb I have to question your choice of .gif. At 7.5Mb this single file will take ~8 seconds to download on the average US broadband connection and will be much slower for many broadband users and most cellular users. GIF is a reasonable choice for very small short animations used sparingly, but is seldom (if ever) a good choice for larger or longer animations. Better choices for those are to use a video or a tool like Edge Animate to create a HTML5/CSS3 animation. The end result will be vastly more user friendly in terms of page load performance.
    A huge percentage of first time visitors to a webpage will cancel the page load rather than waiting 8+ seconds for the page load to complete.

  • Exported swf formatting differs from preview mode

    When I view a model in preview mode, everything looks fine with the formatting.  However, after exporting the file (or viewing the export preview), some of the formatting is incorrect - such as axes labels and titles being truncated or moved from their original position, as well as grid sizes changing so that what I have aligned no longer is aligned. 
    I can make formatting adjustments in the model so that it appears more properly in the exported swf file, basically correcting for these differences.  However, this is obviously not ideal, and I have not been able to identify any patterns in these discrepancies (sometimes it looks fine, other time not).  I appreciate any suggestions!

    Hi,
    I am facing the same issue too. The whole formatting goes off once exported to ppt. The fonts reduce to such an extent that I cannot see the fonts. If I drag the swf component to full screen in ppt, the labels, come over the axes.
    Please let me know how to correct it.

  • Adobe PDF Portfolio - Preview Mode Displaying Incorrect Pages

    I have created a PDF portfolio using the “Grid” template in Adobe Acrobat XI Pro. The Portfolio contains three pdf files. I am getting the following problem when I open the pdf Portfolio in Adobe Reader X and XI and Adobe Acrobat Pro XI.
    Open the PDF portfolio
    Click on pdf3
    Preview mode displays the correct document and pages.
    Close the preview of pdf3
    Click on pdf2
    Preview mode displays pages from pdf3,not pdf2 (see screenshot below).
    Some observations:
    If pdf1 has two pages, and pdf2 has ten pages, pdf2’s preview contains pdf 1 (pages 1-2)  and then pdf2 (pages 3-10).  
    If I continue to open pdfs the preview contains pages from all the pdfs I have opened in the portfolio (this depends on how many pages the document I am currently previewing has). It is not just caching the last pdf opened. 
    Preview mode always displays the correct NUMBER of pages (i.e., if there are ten pages in a pdf, there will be ten pages in the preview. They will just be the wrong pages).
    Turning off local page cache (preferences > page display) does not fix the problem.
    Adobe Reader is up-to-date and Flash is up-to-date. I have replicated the problem on different computers, and in Adobe Reader X and XI, and Pro XI. I have also created muliple pdf portfolios from scratch to confirm the pdf portfolio itself wasn't corrupt.
    Does anyone have an idea what is happening? Users are getting very confused when their preview shows them a completely different document.
    Thanks for any help

    We have the same problem. Everything's up to date. Adobe needs to address this issue!! The portfolio feature is a great idea, but this glitch basically ruins it. If you come by this page with the same problem, make sure you leave a reply. Maybe Adobe will actually pay attention if there are enough complaints.

  • Bridge crashes when hitting spacebar to go into preview mode.

    Hello there,
    So, whenever i've been in Bridge for a little while and want to do a full preview mode by hitting the spacebar I get the dark grey screen and after awhile "the spinning beach ball of death" appears. This continues until I have to force quit Bridge. When I restart bridge and try to do a new preview right away the same problem occurs imeditly.
    I've tried to delete all the preffs both manually and automatically by holding down the option key during start up, but nothing helps. I've also installed the latest updates.
    I'm on a pretty new Macbook Pro 2.53 GHz Intel i5 bought this summer with a SSD harddrive and 4gb of RAM if that is of interest.
    Am I way off if I think it could have to do with the graphics card?
    Well I'm thankful if anybody has solution for this.
    Best,
    Per

    Deleting prefs manually seems to be OK although I personal would not bother
    about the last workspace
    > I don't really understand this part you wrote.
    "What setting do you generally have for Bridge preview, always high Quality
    or on demand or embedded previews
    In Bridge Path Bar top right there are two small checker board icons. The
    left one is just a shortcut for prefer embedded previews that only let you
    cache the thumbs. A quick way to view the content of a non cached folder and
    have the option to glance through thumbnails without having the need to wait
    for all the previews to be build.
    The right one gives you 3 options, first prefer embedded (same as left icon
    and in fact is double but there are still more strange things in Bridge
    regarding to workflow I'm afraid...)
    Second is High Quality on Demand meaning the HQ preview builds when you
    select the file. Somewhat useful but time costly when having to click on
    several files and every time have to wait for the building of the preview.
    Third is Always HQ. This one I prefer to have set as default. It means that
    you have to wait longer for all the previews to being build but this is only
    once  and after this you can browse freely through all the files.
    Having set to also build monitor sized previews in the prefs means you also
    have to wait a little longer once when the folder builds cache but this is
    in the same go after file ingestion and after this you can use the space bar
    almost without delay to see a full screen preview. (And I'm on a 30"" Apple
    Cinema display using mostly files from a EOS 1Ds3, big files, big screen
    When it comes to size it can be any size, either a large psd. file or a tiny
    .jpg. And i have my max set to 1000mb.
    With this setting files above 1000 MB don't build previews but that should
    not cause trouble when hitting spacebar, it only shows the small thumb on a
    full screen with gray background and surely should not let Bridge crash.
    Try also system maintenance with check and repair permissions.
    And if the problem still persist create a new user for testing, log in under
    this new account and try if the problem is still there, just to rule out
    your current user account as the culprit.

  • Footer no longer stays at bottom of page after update!

    After updating to Muse 3.0, my footer no longer stays at the bottom ofthe page.  The 'footer checkbox' is checked.  After I discovered this, I unchecked the footer box and saved files,  then went back re-checked the footer checkbox, saved the files and uploaded to the site. I saved the site as a different site name, uploaded ALL the files. Checked to makesure the manifest files, css were uploaded.  Still have the same issue.

    To revert to Muse 2.3, remove any installed copies of Muse (using Remove Programs on Windows or the Uninstall Adobe Muse application from Applications/Utilities/Adobe Installers on the Mac). Then install Muse 2.3 from:
    http://labsdownload.adobe.com/pub/adobemuse/builds/muse_2-3_install_ma c.dmg
    http://labsdownload.adobe.com/pub/adobemuse/builds/muse_2-3_install_wi n.exe
    We're actively working to determine the cause of the issues and trying to fix them for our users.
    Regards,
    Sachin

  • Unable to view photos after adjustments (except in preview mode)

    I upgraded to Aperture 2.0 and would like the program but for an annoying glitch. Each time I open aperture I can make edits to one or two photos without problems, but then photos start to disappear from the viewer window. There is nothing but a blank canvas where they were. The photos will only reappear after a restart to aperture. The will appear in Preview Mode just fine.
    Anyone have any ideas what the problem could be. I recall this happening a few times with 1.5.6, but this is now happening every time I use Aperture 2.0.
    Thanks.

    yes I get this more often on my Powerbook G4, and have had it a couple of times on my brand new MacBook Pro. With the MBP it's usually half or quarter of the image turning black. With the PG4 it's the whole image turning black. There are several threads on here about this issue with lots of respondents. This issue existed in 1.x and was fixed at some point (was gone in 1.5.6). Sadly it's returned.

  • Preview mode doesn't display correctly

    Lately I have had many problems in preview mode. I had to restart the program to see preview mode correctly. I waste time (on restart, then run the program, and test again the preview mode) each time is not doing correctly. It will be great if someone can help me!
    In design mode:
    Preview mode:

    No, they just display on your browser, when you close your browser the files are deleted.
    I personally like to use preview in browser, I can preview a designed page in Chrome, Firefox and Explorer by just coping the address.

Maybe you are looking for