Footer not coming end of the page in BI Publisher

Hi All,
I am developing a report in which the footer output is not coming end of the page after the tabular output per group Completion.
There is a tabular group and free form group which output coming accourding to number of lines in tabular output but after the tabular output there is one
more group in the form of tabular which show the details sum of the first tabular output which i have to print each of the group end and end of that page but
when i am trying to get output it coming just after the first tabular output.
Please advice...
Regards,
Sushant

you have to use the word footer and header, and put these place-holders there
better send me the template and xml, { i guess.}i know what you are trying

Similar Messages

  • How to find end of the Page in Crystal ? or I need to add one Horizontal line at the end of the page.--- URGENT HELP NEEDED

    Hi friends,
    I need to add one horizontal line  for the detail section at the end of the page.
    I tried to put that line in page footer and i tried with Box also. Both are not properly working. Some space problem is coming.
    Is there any feature to find end of the Page.
    I want report format like this.
    set id  |  set name |  date  Name
      1         x           dddd   vijay
                            dddd   sarathi
                            dddd    reddy
    (End of the page)
    Thanks in advance...
    vijay.

    Do you know how many detail records are showing up per page?
    If you do - you could create a Details B section that is suppressed except for on Record N (where N is a counter, and N is the last Detail record that will show up on a page).
    The Page footer is indeed built so that it will be rendered at the bottom of your physical page of paper.

  • Crystal Reports 9: Page Header plus Page Footer is too large for the page.

    Hi,
    I have a report that has the following sections.
    GH1
    GH2a
    GH2b - has a sub report
    GH2c - has another sub report
    GH3
    GH4
    GH5
    details - suppressed
    GF5 - suppressed
    GF4 - suppressed
    GF3 - suppressed
    GF2 - suppressed
    GF1 - suppressed
    The report works fine wehn I run it using Crystal Designer.I am using CR version 9.2.2.693.
    When I try to load the report in my application, I get the following error.
    Crystal Report Windows Forms Viewer
    Page Header plus Page Footer is too large for the page.Error in File rptName.rpt:
    Page header or footer longer than a page.
    OK  
    There are no 'suppress blank sections' option set in the sections where the sub-Reports are.
    I also tried setting the No Default Printer option.
    The report gets loaded from the application only when I set 'New Page after' in the sections where there are sub-Reports.
    I do not want to do this; Is there a workaround?
    Thank you.

    Can someone tell me if this problem is being worked on as it looks as thogh none of the problems regarding the message u2018Page Header plus Page Footer is too large for the pageu2019 have been addressed.
    We have several reports that were written in Crystal 7 (I think) and worked in Crystal 9 and X1R2 but now give the above error. We have tried jigging the report in line with the various suggestions but at best can get them to run through successfully with one lot of data and then fail on the second or subsequent pages when you vary the data or report format even slightly. We can report on every bit of data separately or in various combinations but not in others. Changing the bottom page margin by 0.01 cm can cause it to fail on page 7 instead of page 530 (for example). We certainly do not have large page headers (just over 2cm) or page footers (about 0.3cm). We do have some subreports in the details section but have used 'fit to section', added 'keep together', removed u2018keep togetheru2019 from just about everything we can (in desperation) but to no avail. We cannot see a pattern to what is happening. It would be encouraging to know that someone is actually working on this fault.

  • Field is moved at the end of the page.....

    When i run the report in report builder the first page is displaying the fileds and data perfectly but in next page the fields are moved, first field is moved at the end of the page i.e the second page have only the first field and the rest of the field is moved to third page.
    How to resolve this?
    Thanks and regards,
    Skud

    Kiran,
    Draw a line in page footer with 1 pix or 2 pix whatever you want.
    Regards,
    Senthil Maruthappan.
    Team work never fails

  • Libreoffice right-click context menu going beyond the end of the page

    having a rather annoying issue with libreoffice 3.x (started with 3.5.x and still in 3.6.1): The right-click context menu goes over the screen borders when I am at the end of the page (instead of opening in the other direction so that all options are visible). I am running arch 64bit KDE 4.9.1. But I think in this case that's not relevant because we have a second computer, the same one basically with an extremely similar setup and there it works just fine. I did uninstall libreoffice, got rid of the .cache in the home folder, then reinstalled but the problem persists.
    Anyone know how to fix this or hints on how to approach the problem?
    Thx!
    Captn

    Update:
    the problem was fixed with an update to KDE 4.9.2 but shortly after for some reason, it reappeared. As previously mentioned, I tried uninstalling libreoffice entirely, including the libreoffice .config folder. Here is what it looks like (second screen shot):
    I noticed that this also happens with dolphin when I open it as root. Someone came across the same issue and fixed it?
    Help's greatly appreciated
    Captn
    Edit: libreoffice version 3.6.1
    Edit 2: Real Problem identified:
    I just wanted to update this thread should there be others that, at one point or another, run into a similar problem. I won't be marking the thread as solved since I did not actually solve the problem (yet). However, I did identify the cause and therefore know how to circumvent it.
    Since I didn't elaborate much on the specs / technical side, I have an HP pavilion with an Nvidia card and I am using the propretiary drivers. I set up a separate X screen for my TV and there is where the problem lies. It has worked for months but since recently this setup causes some weird graphical behavior (as in the above pictures) which can be annoying. If using the twinview setup or no external monitor, everything works normal. My guess is that plasma-desktop and the separate x screen don't work very well together for a reason unknown to me for the time being.
    The problem itself can be annoying if you rely on libreoffice to work so I hope this might help somebody should there be annyone running into a similar issue.
    Last edited by capthilts (2012-10-13 06:02:32)

  • Data runs off the end of the page

    I have a form which is flowed and the rows and table are set to allow page breaks.  However, when a cell has more content than will fit on a certain page, it does not go to the next page, it just runs off the end of the page.  Does anyone know why?
    Thanks!

    Couple of questions,  are you interactively entering data or are you merging data?
    What is the xfa template version or what do you have chosen as the Target version?
    If you click on the cell in Designer and go to the Layout tab, under Height is the "expand to fit" checked?

  • Minefield just would not open pages, whatever I tries to type in the addressbar the URL just stayed there and nothing happened. Even if I opened a new tab and put a new url again it did not even start loading the page. This is happening since the last upd

    Minefield just would not open pages, whatever I tries to type in the addressbar the URL just stayed there and nothing happened. Even if I opened a new tab and put a new url again it did not even start loading the page. This is happening since the last updates from today or yesterday. I already removed minefield and installed it again
    == This happened ==
    Every time Firefox opened
    == today ==
    == User Agent ==
    Mozilla/5.0 (Windows; Windows NT 5.2; Win64; x64; rv:2.0b3pre) Gecko/20100728 Minefield/4.0b3pre ( .NET CLR 3.5.30729; .NET4.0E)

    Create a new profile as a test to check if your current profile is causing the problems
    See [[Basic Troubleshooting|#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins"
    If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
    See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    See also http://kb.mozillazine.org/Browser_will_not_start_up
    You can discuss issues with Namoroka 3.6 and Minefield 4.0 nightly and alpha/beta builds at the MozillaZine Firefox Builds forum.
    That forum is better suited to discuss such issues.
    You need to register on the MozillaZine forum site in order to post at that forum.
    See http://forums.mozillazine.org/viewforum.php?f=23

  • Not able to reset the page number in XML Publisher based on each PO

    Not able to reset the page number in XML Publisher based on PO
    Hi,
    I have created a custom purchase report and rtf template. In the rtf template, I have added the page number feature (i.e. Page 1 of 5) from Word in the template. When I run the report for a range of POs, I expect the results as follows:
    I have given 3 POs on single request. (PO#1 has 3 pages, PO#2 has 2 pages and PO#3 has 4 pages), the page number on each PO should look like as follows:
    PO#1 page 1 of 3, page 2 of 3, page 3 of 3
    PO#2 page 1 of 2 page 2 of 2
    PO#3 page 1 of 4, page 2 of 4, page 3 of 4 and page 4 of 4
    But the page number displays on each PO as follows:
    PO#1 page 1 of 9, page 2 of 9, page 3 of 9
    PO#2 page 4 of 9 page 5 of 9
    PO#3 page 6 of 9, page 7 of 9, page 8 of 9 and page 9 of 9
    Here I have to reset the page number based on each PO. If anyone done this already, can you please share with me.
    Thanks,
    Ram.

    Hi
    One clarification please.
    Are you putting Page # of ## in the for-loop section? I mean it should be within For-each@section block.
    Even if this doesn;t work, then try using Insert->Page Break after every PO.
    Regards
    Varun

  • When we purchase from iTunes the balance is not coming off of the gift cards. We have family sharing on but when my kids purchase songs they are credited to our credit card and not the gift card that is already in their account. What's wrong?

    When we purchase from iTunes the balance is not coming off of the gift cards. We have family sharing on but when my kids purchase songs they are credited to our credit card and not the gift card that is already in their account. What's wrong?

    Hi Angela1313,
    I see that you have a question about using gift cards with Family Sharing. Here is an article with some information that my be pertinent to this issue:
    iTunes Gift balances
    http://support.apple.com/kb/ht5035
    Learn more
    Learn how to send an iTunes Gift or redeem iTunes Gift Cards and content codes. If you're using Family Sharing, the credit you redeem will only be available to you. iTunes Store credit on your account isn't shared with other family members.
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • How can I forward a web page (not a link but the page) using Mac Mail'Mountain Lion?

    I want to mail a web page, not a link to the page but the page itself. I use Mountain Lion and Mac Mail. I used to be able to do this with Lion.

    Look in the outgoing email message window. Make sure Send Web Content is not set to Link Only

  • Cancelling the GR the excise item tab is not coming after flagging the OK

    Hi SAP Experts,
    there is one subcon PO for excisable material for depot, after its GR it have been posted from j1iex.
    Now there is a requirement to cancel the excise posting for which first of all its GRN should be cancel.
    But while cancelling the GR the excise item tab is not coming after flagging the OK.
    This problem is there only for the depot, for other plant Im able to cancel for subcon PO.
    Thanks & Regards,
    Anisha Sinha

    still not cleared

  • I have Adobe Photoshop Elements 10 and I wish to upgrade with Adobe Creative Suite 3 but the option is not coming up on the drop down menu

    I have Adobe Photoshop Elements 10 and I wish to upgrade with Adobe Creative Suite 3 but the option is not coming up on the drop down menu

    The first two issues sound like a video driver problem.
    What is the make/model of your video card/chip?
    What is the installed video driver number and date?
    For the last issue, it could be many things, including the video driver. I'd look over this ARTICLE, and if there is nothing in the first part, then move on to tuning up the OS an computer in the second part. That would probably be a good time to post the full specs. of your computer, and also both your Project and Source footage. Finally, part three covers many troubleshooting tips, and furnishes many links.
    Good luck,
    Hunt

  • BSP adds CR/LF marker at the end of the page even with compression options

    Hello!
    I'm creating normal BSP Page with Flow Logic and setting the contents myself:
    <%@page language="abap" %><%
      response->set_cdata( '-=-' ).
    %>
    The problem is that WebAS somehow always adds a CR/LF (new line) marker at the end of the page (even if I set compression option to "Remove leading and trailing spaces"). I also tried to set different mime-types.
    On the other side there is a BSP Application it00 (described here http://help.sap.com/saphelp_nw04/helpdata/en/eb/8c683c8de8a969e10000000a114084/content.htm ) that shows the uploaded file right.
    So I was trying to include that 'solution' setting OnInputProcessing event to this
    *         set response data to be the file content
              runtime->server->response->set_cdata( '!=!' ).
    *         set the mime-type and file size in the response
              runtime->server->response->set_header_field(
                name  = 'Content-Type'
                value = 'text/plain' ).
              runtime->server->response->set_header_field(
                name  = 'Content-Length'
                value = '3' ).
              navigation->response_complete( ).
    But nothing happens at all.
    Please, help me getting rid of these two annoying bytes ('CR/LF') at the end of page.

    Thank you, Cornelia!
    It works now.
    The following code is "must have"
    navigation->response_complete( ).

  • My hp 100 mobile printer will only print one page then quits. will not print all of the pages.

    my hp 100 mobile printer will only print one page then quits. will not print all of the pages.  i have rebooted, new install, and reset. still the same thing. when i look it shows that it is printing but there is nothing happing. i use this with my lap top.

    Hello colt1,
    Are you using Bluetooth or USB cable to connect to the printer?  Did you install from the disc, or from the online program?  When it sits there and doesn't print, does it eventually give error messages, lights flashing, etc.? 
    Thanks,
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Technical Details: The website does not support encryption for the page you are viewing. Information sent over the internet withour encryption can be seen by other people while it is in transit

    Technical Details:
    The website does not support encryption for the page you are viewing.
    Information sent over the internet withour encryption can be seen by other people while it is in transit
    == This happened ==
    Not sure how often
    == started few days ago. previously never happened before.

    I was loading a website, it then stated as below, it wasnt any of the problems stated below.
    SERVER NOT FOUND
    # Check the address for typing errors such as
    ww.example.com instead of
    www.example.com
    # If you are unable to load any pages, check your computer's network
    connection.
    # If your computer or network is protected by a firewall or proxy, make sure
    that Firefox is permitted to access the Web.
    Thus i checked the Page Info, it states that:
    Security Info on page:
    '''This website does not supply ownership information.
    Connection not Encrypted.'''
    Technical Details:
    The website does not support encryption for the page you are viewing.
    Information sent over the internet withour encryption can be seen by other people while it is in transit

Maybe you are looking for