Footer note on last page of script

Hi All,
I want to display a footer note on the last page of script. For that I am writing following code in my script.
:/BOTTOM
:/IF &NEXTPAGE& EQ 0
END OF SCRIPT
:/ELSE
CONTINUE ON NEXT PAGE
:/ENDIF
:/ENDBOTTOM
Also I am using top of page using top & endtop.
It is working fine.
Regards,
Dilip
Message was edited by: Diliip Gupchup

Hi,
Check this one
Re: Printing Footer in the output.
Re: Smart Form Footer help
Thanks & Regards,
Judith.

Similar Messages

Avoid printing Header and Footer in the last page

Hi,
Could anyone please let me know how to avoid print the header and footer in the last page?
Note: I'm printing RTF template for publishing the output.
Looking forward for your valuable inputs/suggestions.
Thanks in advance,
Regards,
Muru

Hai,
My report got FROM PO & TO PO parameters and i need to print footer only in first page of each PO. Tried with section but now i am getting first page of all PO contionious and then all lines together.
Please call me or sent replies to [email protected]

How to get the last page SAP Script form

How to get the last page SAP Script form.
I want to print a specific information in the last page of SAP form (Script). Please tell me how to get the last page number.
Regards

Hi
You have to check the system variable &NEXTPAGE&, if it's 0 it means you're in the last page.
From SAP Help:
This symbol is used to print the number of the following page. The output format is the same as with &PAGE& .
Note that on the last page of the output, in each window that is not of type MAIN, &NEXTPAGE& has the value 0.
/: IF &NEXTPAGE& = '0'
Last page
/: ENDIF
Max

How to get footer only in last page of report

anybody tell me
1).how to get footer only in last page while we are displaying reports
 and header only in first page .
2) how to create search help and how to use it .
3) how to create lock objects and how can we use it

Hi
This posting has an example of using a splitter container:
Changing width of a custom container dynamically
This posting has a discussion about using TOP-OF-PAGE:
Display Page numbers in ALV
This posting has an example of using picture control:
Insert picture in selection screen.
This posting has an example of putting a picture on top of an ALV grid:
Logo in OO ALV Grid
The page footer is defined using the statement END-OF-PAGE.
The processing block following END-OF-PAGE is processed only if you reserve lines for the footer in the LINE-COUNT option of the REPORT statement.
CREATION:
Go to SE11 Tcode
select search help
give the 'z' search help name and create
select the selection method ur table name eg : 'mara'
dialog module 'display value immediately'.
add the field whatever u want and lpos = 1 and spos = 1 and check import and export parameter.
where left position when displaying and spos = search position
and then save and activate ..
Creating Search Help:
http://www.sapdevelopment.co.uk/dictionary/shelp/shelp_basic.htm
http://www.sapdevelopment.co.uk/dictionary/shelp/shelp_imp.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ee86446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ee2b446011d189700000e8322d00/frameset.htm
A lock object is a virtual link of several SAP tables which is used to synchronize simultaneous access by two users to the same set of data ( SAP lock concept).
Locks are requested and released in the programming of online transactions by calling certain function modules which are automatically generated from the definition of the lock objects. These lock objects must be explicitly created in the ABAP Dictionary.
To set locks, you must perform the following steps:
1. You must define a lock object in the ABAP Dictionary. The name of the lock object should begin with E.
2. The function modules for requesting and releasing locks which are created automatically when the lock object is activated must be linked to the programming of the relevant online transactions.
Reasons for Setting Locks
Suppose a travel agent want to book a flight. The customer wants to fly to a particular city with a certain airline on a certain day. The booking must only be possible if there are still free places on the flight. To avoid the possibility of overbooking, the database entry corresponding to the flight must be locked against access from other transactions. This ensures that one user can find out the number of free places, make the booking, and change the number of free places without the data being changed in the meantime by another transaction.
Lock Mechanisms in the Database System
The database system automatically sets database locks when it receives change statements (INSERT, UPDATE, MODIFY, DELETE) from a program. Database locks are physical locks on the database entries affected by these statements. You can only set a lock for an existing database entry, since the lock mechanism uses a lock flag in the entry. These flags are automatically deleted in each database commit. This means that database locks can never be set for longer than a single database LUW; in other words, a single dialog step in an R/3 application program.
Physical locks in the database system are therefore insufficient for the requirements of an R/3 transaction. Locks in the R/3 System must remain set for the duration of a whole SAP LUW, that is, over several dialog steps. They must also be capable of being handled by different work processes and even different application servers. Consequently, each lock must apply on all servers in that R/3 System.
SAP Locks
To complement the SAP LUW concept, in which bundled database changes are made in a single database LUW, the R/3 System also contains a lock mechanism, fully independent of database locks, that allows you to set a lock that spans several dialog steps. These locks are known as SAP locks.
The SAP lock concept is based on lock objects. Lock objects allow you to set an SAP lock for an entire application object. An application object consists of one or more entries in a database table, or entries from more than one database table that are linked using foreign key relationships.
Before you can set an SAP lock in an ABAP program, you must first create a lock object in the ABAP Dictionary. A lock object definition contains the database tables and their key fields on the basis of which you want to set a lock. When you create a lock object, the system automatically generates two function modules with the names ENQUEUE_<lock object name> and DEQUEUE_<lock object name> . You can then set and release SAP locks in your ABAP program by calling these function modules in a CALL FUNCTION statement.
Lock Types
There are two types of lock in the R/3 System:

Shared lock
Shared locks (or read locks) allow you to prevent data from being changed while you are reading it. They prevent other programs from setting an exclusive lock (write lock) to change the object. It does not, however, prevent other programs from setting further read locks.
Exclusive lock
Exclusive locks (or write locks) allow you to prevent data from being changed while you are changing it yourself. An exclusive lock, as its name suggests, locks an application object for exclusive use by the program that sets it. No other program can then set either a shared lock or an exclusive lock for the same application object.
example uses the lock object ESFLIGHT and its function modules ENQUEUE_ESFLIGHT and DEQUEUE_ESFLIGHT to lock and unlock the object.
For more information about creating lock objects and the corresponding function modules, refer to the Lock objects section of the ABAP Dictionary documentation.
The PAI processing for screen 100 in this transaction processes the user input and prepares for the requested action (Change or Display). If the user chooses Change, the program locks the relevant database object by calling the corresponding ENQUEUE function.
MODULE USER_COMMAND_0100 INPUT.
CASE OK_CODE.
 WHEN 'SHOW'....
 WHEN 'CHNG'.
* <...Authority-check and other code...>
 CALL FUNCTION 'ENQUEUE_ESFLIGHT'
EXPORTING
MANDT = SY-MANDT
CARRID = SPFLI-CARRID
CONNID = SPFLI-CONNID
EXCEPTIONS
FOREIGN_LOCK = 1
SYSTEM_FAILURE = 2
OTHERS = 3.
IF SY-SUBRC NE 0.
MESSAGE ID SY-MSGID
TYPE 'E'
NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
The ENQUEUE function module can trigger the following exceptions:
FOREIGN_LOCK determines whether a conflicting lock already exists. The system variable SY-MSGV1 contains the name of the user that owns the lock.
The SYSTEM_FAILURE exception is triggered if the enqueue server is unable to set the lock for technical reasons.
At the end of a transaction, the locks are released automatically. However, there are exceptions if you have called update routines within the transaction. You can release a lock explicitly by calling the corresponding DEQUEUE module. As the programmer, you must decide for yourself the point at which it makes most sense to release the locks (for example, to make the data available to other transactions).
If you need to use the DEQUEUE function module call several times in a program, it makes good sense to write it in a subroutine, which you then call as required.
The subroutine UNLOCK_FLIGHT calls the DEQUEUE function module for the lock object ESFLIGHT:
FORM UNLOCK_FLIGHT.
 CALL FUNCTION 'DEQUEUE_ESFLIGHT'
 EXPORTING
 MANDT = SY-MANDT
 CARRID = SPFLI-CARRID
 CONNID = SPFLI-CONNID
 EXCEPTIONS
 OTHERS = 1.
 SET SCREEN 100.
ENDFORM.
You might use this for the BACK and EXIT functions in a PAI module for screen 200 in this example transaction. In the program, the system checks whether the user leaves the screen without having saved his or her changes. If so, the PROMPT_AND_SAVE routine sends a reminder, and gives the user the opportunity to save the changes. The flight can be unlocked by calling the UNLOCK_FLIGHT subroutine.
MODULE USER_COMMAND_0200 INPUT.
CASE OK_CODE.
 WHEN 'SAVE'....
 WHEN 'EXIT'.
 CLEAR OK_CODE.
 IF OLD_SPFLI NE SPFLI.
 PERFORM PROMPT_AND_SAVE.
 ENDIF.
 PERFORM UNLOCK_FLIGHT.
 LEAVE TO SCREEN 0.
 WHEN 'BACK'....

Another Example :
please see this link with Screen shot .....
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eea5446011d189700000e8322d00/frameset.htm
Reward all helpfull answers
Regards
Pavan

Reader 9.3.2 does not remember last page visited for scanned pdfs

Using an old school PPC Mac, OSX 10.4.11. Reader 9.3.2 does not remember last page visited for scanned pdfs. It only remembers the last page visited for searchable pdfs, but not for scanned. I have the box checked in "Preferences: Restore last view settings..." I cannot upgrade Reader on this system, or my OS, so I'm stuck using what I have for now. I have to read huge documents for my work, that will include hand written notes in the margin and other marks on the page. The documents are hundreds of pages long, so it's a bit frustrating that it can't remember the page number for this type.
Are there any fixes for this? Something else I can try?

I tried to find the download for 9.5.5, but my OS is not in the list. I'm on a non-intel PPC mac. I tried finding that version on the web, but most of the links lead me back to Adobe, where it doesn't seem to want to be found. It obviously exists somewhere, but Adobe isn't making it easy to access!

Displaying Footer on the Last Page of the report

Hi Experts,
We have a requirement to display footer on the last page of the report only.
Could you please guide how to acheive this.
Thanks in Advance,
Cheers,
Andy.

Pls see this Blog.It may help you
http://blogs.oracle.com/xmlpublisher/2007/03/30/
Thx
Rahul

How do you make it print first page first and not the last page first?

I have a HP Officejet Pro 8600. How do I make the first page print first and not the last page printing first?

Hi,
From the application used to print open the print dialog and click Oroperties or Preferences to access the Printing Preferences screen.
From the Layout tab set Page Order as Back to Front, then the first page will be printed first.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Not to print last page in Script

Hi Experts,
I am having a Z-script for tcode F110.
There i don't want to print 'last' Page in the form.
The program which i s calling driver program is a standard sap include RFFORI06 calling
'Last ' page with window 'Summary'.
As its a standard include i can't make any changes in driver program.
Please help.
Thanks in advance for your support.

The 'last' page and its window is getting called from a standard sap include as mentioned above.
Even if i will delete 'last' page but as start_form is calling 'last' page it will generate a blank page irrespective
of the page 'last' is deleted.
I have even tried to do so by generating a test program and calling the script.
Kindly advice.

Display value in footer on only last page:

I have the same footer on 3 of my master pages. Depending on data, my form may grow to several pages.
The first 2 master pages display exactly once and the third page grows to no. of pages depending on input data.
Is it possible to script some event so that the textfield on footer displays only on last page?
I have seen examples of xfa.layout.pageCount() and xfa.layout.page(this), and tried the conditions on if last page = currentpage, show/hide the value of text field in the footer.
If there are 10 pages, system should display the text value in the footer only in the 10th page. If the form got only 2 pages, it should display only on second page.
I tired all kinds of scripting with pagecount and page(this). But the script is effecting all the pages irrespective of first/ last page.
I will be greatful if you can put the sample code/ form on how to do this.
Thanks,
Krishna

Hi Paul,
Thank you for the logic.
Actually I tried this.
I have some fields in the 3 footers which got some explicit binding. If I put some value in the first page footer in this field, and if the logic (current page != no.of pages) , the value is getting reflected in all pages without checking for further pages.
I figured out what the actual problem is. It's not with page logic. But with the externally binded fields. If we put the calculated field for one footer, the form will keep the same value without taking from external binded xml. I tried it in a alternate way by getting these values using calculated fields and that worked for me.
Krishna

Need to place the window only in last page in script

Hi,
I want to place the footer window only in the last page.If it has 2 pages the footer window shhould come in second page only if there is only 1 page then it should come in the first page.
can anyone tell me how to do this in Script.

HI Camila,
In such a case, donot use the footer of the Table , but create another window-FOOTER which is positioned after your table, with such a design, your footer would alwyas come only at the end of the Table.
This is a simpler approach.
The other approach could be to set Conditions in the condition tab of the footer , such as it comes only on the last page.
If you take my suggestion, i would say use the 1st option i have explained.
This will help you.

FLOW LOGIC - Not printing last page

I am working on a multi page form. The first page is allowed to over flow into the next page - at the end of the main window i want the last page to print. But it does not come out. I only get the first page and the overflow page but never the last page.
How do I , how can i force the last page to always come out?
we have this working in sap script - but smart forms is not working the same.
I have seached the documentation and the online forums. I believe this to be a problem with smartforms. I searched OSS notes but did not find anything there that applies either.
any help would be appreciated
thanks,
Julia

Place command prompt at end of your main window items. And Tick the nex page attribute in the command prompt, make sure you also specify the next page.
Regards,
SaiRam

How to hide fields on Repetitive Area Footer on the last page?

Hello,
How can I avoid printing some fields on the last page, when this fields
are on the Repetitive Area Footer, and the Repetitive Area Footer is
defined to print on all the pages? I was hoping to do this with fileds linked
to (ContinueNextPage) field, but it doesn't work!
Regards,
Júlio Pinho

hI Júlio Pinho,
i think, it is not possible in Repetitive Area Footer on PLD.
but, it is possible in Page Footer on PLD.
IF you dont need print some Fields in Last Page on printout.
Try this,
->> Open the require PLD.
->> Create require Fields in Page Footer.
for example,
=> Create DocTotal Field in Page Footer on PLD.
=> Link to SystemString (ContinueNextPageNotice) Formual FieldID in DocTotal Filed.
Save and Run the Print Preview.
Regards,
Madhan.

How to find out last page in scripts

hi all,
i have a problem in SAP scripts.
if pages increment is dynamic then how to write data in the last page of footer window .
Thanks & Regards,
Hari Krishna.K

Hi...
Write this code.
/: IF &NEXTPAGE& EQ 0.
Last page
/:ENDIF.
Regards,
Suresh......

Terms and Conditions to display in the last page of Script

Hi Experts,
My requirement is to print the Terms and Conditions in the Last Page of a PO. so for that, I have created one LAST page. Previously i have FIRST Page and Next Page in the Script. In the LAST Page it has to windows. One is for Logo and another one is for Terms and Conditions. I am trying to print to Terms and Conditions through a Standard Text ( Created in SO10) in the Terms and Conditions window.
The page flow are like FIRST-->NEXT, NEXT>LAST, LAST---->LAST
Please guide me how shall i proceed to get the output. It would be better if we get the output with out doing any change to the driver program.
Thanks,
Priyabrata

Dear Priyabrata
The page flow should like FIRST-->NEXT, NEXT>NEXT, LAST---->
And call your page in main window at last element.
This will surely solve your problem.
Regards,
Vijay

Create last page in script

Hello guys!!!
i have a script with 2 pages.
i want a page to be printed with some text on it at the end of the script printing.
that means... if i've 3 pages of script , then i want a 4th page with some text on it.
i've tried &PAGE& EQ &SAPSCRIPT-FORMPAGES&
AND &NEXTPAGE& EQ 0
BUT, they did not work.
is there ny otherway we can achieve dis? or i did nything wrong??
i was writing the code at the end in the main window. shud i wrtite it somewer else??
how does this page printing works in the script.. some1 help
<removed_by_moderator> <= please read [the rules|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] here.
thnx
ziden
Edited by: Julius Bussche on Aug 7, 2008 12:02 PM

did you try out what I suggested? Does it work? If yes, why more concerns?
MAIN window is triggered only once. You see it triggered more times, because when the page is full, all other windows are triggered and after that MAIN window is continued from the point, where it reached the page end (just check the page number in debugging screen)

Footer note on last page of script

Similar Messages

Maybe you are looking for