Footer seems to be "sticking" to bottom edge of browser window and not bottom of website
Hi, all
I am designing a site in Muse CC (2014) and have my footer on the master template located in the designated footer area. But for some reason the footer is anchoring or sticking along very bottom edge of the browser window instead of at the bottom of the live website area. Below is a link to the website:
Home
You may need to adjust your window and drag down to see whats actually happening, since on first appearance it seems to sit correctly at bottom edge of website.
Thanks for your assistance!!
Howard
No, its still not correct. It looks like it upon first appearance but if you reduce the view so you can get space below the website, the footer stays fixed to bottom edge of browser window. Seems to happen in most browsers not just Safari. You need to stretch the browser window down and footer moves with it. Thanks.
Similar Messages
-
I have a html page that loading in two edge compositions and an external custom javascript file. The javacsript file includes the bootstrapCallback so I can store references to the loaded compositions and can communicate with them. This seems to work well. The problem have is when I also try and load in a custom plugin javascript files into the edge compositions via the script window inside edge - I don't understand how this works, for example if I load in a custom javascript file into one of the compositions can only that composition use it's funcitionality? Is loading in scripts via edge script window the same as including in html document, I'm confused how the two relate, please help me understand.
I have a html page that loading in two edge compositions and an external custom javascript file. The javacsript file includes the bootstrapCallback so I can store references to the loaded compositions and can communicate with them. This seems to work well. The problem have is when I also try and load in a custom plugin javascript files into the edge compositions via the script window inside edge - I don't understand how this works, for example if I load in a custom javascript file into one of the compositions can only that composition use it's funcitionality? Is loading in scripts via edge script window the same as including in html document, I'm confused how the two relate, please help me understand.
-
When I use IE browser to open my YAHOO EMAIL "classic" or "New" account, and I open an "inbox email", I have the option of "viewing" attachments, or "downloading" attachments.
I used to have that "dual" option, seemingly, using Firefox Browser, which I prefer to use.
Now, when I open my "Classic" or "New" Yahoo Email Account/s, with Firefox Browser, I no longer have the option, seemingly, to "VIEW" the attachments, but only the option to "Download" them, which I prefer not to do.
I have tried this using the older version 3.6 and the new version 9 of Firefox with the same results. No "Dual Attachment Viewing/Downloading" option in Yahoo Mail anymore in either the "Classic" or "New" versions of Yahoo Mail.
Can I correct this or change this back to the older "DUAL" OPTION of "Viewing" and/or "Downloading" attachments...or is this just the way the New FireFox Browser works.?
This is only happening to me with YAHOO.COM Email Accounts.Thank you! I suppected it would be in the settings somewhere. I' ve much to learn...get myself into trouble pushing buttons I don't really understand.
-
I record a midi keyboard track along with a song, it sounds great, then, when i go to mix, playback, the midi track is behind the beat and out of sync.. i've tried every setting I can think of.. the strangest thing is that I've used this exact keyboard in the past with this exact computer, running the same version of logic pro, and it worked fine, now it just doesn't work.. it seems an awful waste to have all these "great software instruments" but they are essentially useless now... it is beyond frustrating to have this so-called "great technology" that doesn't even work and to spend more time TRYING to get it to work than actually doing some work with it...
After re-reading the first post, I don't think it would be quantize, either, sorry about that.
There are a couple more places to look:
Look at the highlights, one is for track, one is for region. Notice how I have it on MIDI thru (top part). That has a delay value. When you select a region, you can have a different value there, as well. Also, the Track part has a place with a delay value. These are three delay values that are in addition to the audio preference Recording delay. -
The problem with iTunes clipping last 15-20 seconds of song playback to jump to next song has been a problem listed since 2009, and the only solutions are from community users. No official replies at all from Apple. Why is that? I'm currently having this problem with my iPad2 and latest IOS, with no idea what is causing the problem. They haven't even looked to a fix it seems
Due to phenomenal development in Windows, Microsoft released 4 generations of operating systems, succeeding Windows XP. Hence, on various aspects, Windows XP becomes too old to be used practically these days. So the support was pulled out.
I do agree that Windows XP is the most successful operating system ever, so far. But, later versions added more features, enhanced security and compatibility. Moreover, at this point, Windows XP becomes more vulnerable, although security patches are made.
Ultimately, we need to move to a more secure, feature-rich and highly compatible operating system.
With improved features in newer versions of Windows, the NTFS filesystem has also been improved, adding new features. Hence, certain feaures that are not availble in Windows XP are available in Windows 7, again, in Windows 8.1. So is the disk management
features.
As for Acronis Disk Director, it's a third party software and hence we can't comment on the features/its working.
Balaji Kundalam -
Internet connection with GPRS/EDGE, but no WiFi and NOT on a Blackberry supported network
Hello,
New 8900 owner here. Living in Vietnam at the moment...and I have a prepaid plan that includes GPRS. It always worked fine with prior devices, so I am confident in the service.
First issue:
I don't think the provider offically supports BES traffic...so I may have to swtich. Is anyone aware of a way around this? (don't want to change my phone number)
Second issue:
For just basic web browsing...I want to use my GPRS connection. The phones shows it connected via the service provider. But, when I launch the web browser it says this requires a WiFi connection. Why would that be?
Any help is really appreciated!
Thank you.
DavidHello
For the second issue.
you have to change the browser settings as follows.
Options --> Advanced Options --> Browser
then change the Default Browser configuration to internet browser or WAP browser.
Regards
Chamikara
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data. -
Here's what I've tried;
SMC reset
Pram reset
Looked at activity monitor - mostly seems OK aside from a kernel task taking up memory (approx 460MB) but CPU is around 96% idle.
Fan seems to be running constantly - heats up noticeably when I close the MBP
Despite a re-install of Mavericks, MBP is running frustratingly slow. Just typing is enough to bring on the beach ball.
Have backed up everything, reinstalled from a clone, checked through Apple Hardware test and carried out a Verify Disk Permission - nothing was reported, erased the drive and set up again - problem still stands.
Memory is running at 3.43 GB without anything really running bar Safari.
A little loath to install SMC fan control without knowing what's wrong.
Checked software updates.
Can anyone tell me what the matter is? Does this have a fix?
Have been reading up various posts but to no avail so have resorted to posting myself.
Does this sound familiar to anyone?
Many, many thanks
Roque1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[45]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}')printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ s/ *:$//;x;s/\n//;/Apple|Genesy|Intel|SMSC/d;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;} ' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/:/;END { if(NR<100)print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { $4="";gsub(" "," ");gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}')print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR==2'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' ' s/^.{52}//;s/ .+//p ' ' /Launch[AD].+\.plist$/;END{if(NR<100)print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' '/\.(framew|lproj)/d;/plist:|:.+(M.+exec|scrip)/s/:[^:]+//p' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/;END{if(NR<100)print "/System/"};' '/^\/usr\/lib\/.+dylib$/p' '/\/etc\/(auto_m|hosts[^.]|peri)/s/^\.\/[^/]+//p' ' /\/(Contents\/.+\/Contents|Frameworks)\//d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' /lR/ { if($2<='${p[25]}')print $2;} ' ' BEGIN { FS=":";} $3~/(sh|ng|ic)$/ { n=split($3,a,".");sub(/_2.+/,"",a[n-1]);b=b"\n"$2" "a[n-1]" "a[n]" "$1;c=c$1;} END { d="sort|tail -n'${p[38]}'";print b|d;close(d);if(c)print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(A.+ E.+ text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' /:/{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status '-F bsd -k Sender kernel -k Message Req "Beac|caug|dead[^bl]|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN" -k Message Rne "Goog|ksadm|SMC:" -o -k Sender fseventsd -k Message Req "SL"' '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/*/*.{BS,Bas,Es,OSXU,Rem}*.bom' '{/,}L*/Lo*/Diag* -type f \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;' '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto_master,{cron,fs}tab,hosts,{launchd,sysctl}.conf} /usr/local/etc/periodic/*/* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n 'syscall::'${p[33+j]}':return {@out[execname,uid]=sum(arg0)} tick-10sec {trunc(@out,1);exit(0)}'";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP RSSI Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear;};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(echo "${v[$1]}") <(echo "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ test "$v"&&echo "$_";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;A0;{ A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D22 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D23 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;D22 32 31 43 38;D23 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Following tutorial, but footer won't stay at the bottom!
I'm following the tutorials on Dreamweaver CC at Creating your first website – Part 3: Styling the header & navigation menu | Adobe Creative Cloud tutorials.
I'm up to part 3 but my footer won't stay at the bottom, and my code seems to match the target code. Any ideas please?
My Code:
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>Bayside Beat: Cable Cars</title>
<link href="styles/main.css" rel="stylesheet" type="text/css">
<!--The following script tag downloads a font from the Adobe Edge Web Fonts server for use within the web page. We recommend that you do not modify it.-->
<script>var __adobewebfontsappname__="dreamweaver"</script>
<script src="http://use.edgefonts.net/source-sans-pro:n6:default.js" type="text/javascript"></script>
</head>
<body>
<div id="wrapper">
<header id="top">
<h1>Bayside Beat</h1>
<nav id="mainnav">
<ul>
<li><a href="index.html">Home</a></li>
<li><a href="sightseeing.html">Sightseeing</a></li>
<li><a href="#">Eating Out</a></li>
<li><a href="#">What's On</a></li>
<li><a href="#">Where to Stay</a></li>
</ul>
</nav>
</header>
<div id="hero">
<article>
<h2>Be Where It’s At</h2>
<p>San Francisco is one of the most exciting and vibrant cities on the planet. Bayside Beat is here to keep you informed of the best places to see, where to eat, what to do, and where to lay down your weary head after an action-packed day—or night—on the town.</p>
</article>
<img src="images/golden_gate.jpg" alt="Golden Gate Bridge in San Francisco Bay"/> </div>
<article id="main">
<h2>Riding the Cable Cars</h2>
<p>No visit to San Francisco is complete without a ride on the iconic cable cars that climb up the vertiginous hills of the city. Of the twenty-three lines established between 1873 and 1890, three remain: two routes from downtown near Union Square to <a href="http://www.fishermanswharf.org/">Fisherman's Wharf</a>, and a third route along California Street.</p>
<p>The cable cars rely on cables running constantly beneath the road’s surface. The driver—or gripman—uses a lever to grip the cable to pull the car and its passengers up the hill. The gripman requires not only great strength, but also great skill. He needs to know where to release the cable to coast over crossing cables and points. The conductor works in close cooperation with the gripman, operating the brake at the rear of the car to prevent it from running out of control on the downward slopes.</p>
<figure class="centered"><img src="images/cable_car1.jpg" width="400" height="266" alt=""/>
<figcaption>The cable car terminus near Union Square</figcaption>
</figure>
<p>Although the cable cars are now mainly a tourist attraction, they’re still used by local commuters to get to and from work. The California Street line is particularly popular among commuters on weekdays.</p>
</article>
<aside id="sidebar">
<h2>Cable Car Tips</h2>
<p>A single ride on a cable car costs $6. If you plan to travel around the city, it’s often cheaper to buy a <a href="http://www.sfmta.com/cms/mfares/passports.htm">Muni Passport</a>, which gives you unlimited rides on San Francisco’s extensive public transport system, including the cable cars (but not the <a href="http://www.bart.gov/">BART subway</a> system). Even a single-day passport ($14) will save you money if you make a return trip, and stop off to visit Chinatown one way.</p>
<p>There are often long lines at the cable car terminus, particularly on the Powell-Mason and Powell-Hyde routes. If you don’t want to wait, try walking a few stops along the route. The conductor usually leaves a small number of places to pick up passengers on the way. The California Street route is generally less crowded (but not as spectacular).</p>
</aside>
<footer>
<p>© Copyright 2013 Bayside Beat</p>
</footer>
</div>
</body>
</html>Hello,
do you think about sticky-footer-technique? Nancy O. made a fine demo here: http://alt-web.com/DEMOS/CSS2-Sticky-Footer.shtml
Good luck!
Hans-Günter -
Footer doesn't lock at the bottom of the page.
Here's my draft. What am I doing wrong?
http://morganyatesstudiosalon.businesscatalyst.com/index.htmlDo a Select All in Design view I expect you'll find an empty text frame in the area below the footer. (It appears to be roughly 5 by 15 pixels and below the bottom left of the page.) It's what's causing your footer to be taller than you want. If you don't immediately find it, be sure to Unlock All and also check the applied master page.
-
Playing content from a USB stick on an Edge 340
Is it possible to have an Edge 300 or 340 play content from a USB stick? This works on DMP 4310s but wondering if this is possible with an Edge device? Have a customer that uses digital signs but can't always have network connectivity so places video content on a USB stick to play through the DMP without network connectivity.
Thanks
JohnHi,
Note: The 4310 itself has had a significant API overhaul in the latest firmware release.
Now, the Cisco Edge has its own set of APIs, see FAQ at http://www.cisco.com/c/en/us/products/collateral/video/edge-340-digital-media-player/q-and-a-c67-729672.html
Some of the native API is documented here but its mostly system management commands:
http://www.cisco.com/c/dam/en/us/td/docs/switches/lan/cisco_edge_340/software/release/1_0/configuration/guide/340cg_en.pdf
The 340 is pretty much a regular Fedora 16 Linux system, it runs binaries and RPMs from that release (it can be tricky because the installed ones have edge340 in the package name, this wreaks havoc on dependencies so I'm trying to stick with static vs linked binaries and not mess with the stock RPM database) so you can modify it to do anything Linux can do.
One example that would not break your setup or modify it: You can SCP content to the local flash storage (or a USB stick if you wish) and remotely issue a VLC command line via ssh to play that local media in full screen mode. We have been experimenting with playing multicast video URLs in this manner by providing a multicast address and port on the command line.
Since as I mentioned, it's just a Linux box, I have a prototype I've updated to a later version of VLC than what was included so it's hard for me to say "oh, this works great" because mine isn't stock anymore. I've also hacked it to do Airplay (apple) mirroring from my iPhone or Macbook Pro for example.
(Just don't nuke the restore partition on the flash media. I have had to roll it back to stock once or twice.)
Our BU (we're an end user of the 340) has done various things on the 340 like emulating the 4310's api with a java daemon that responds to similar commands. I don't know if this is fully complete or an approach we're moving forward with. I think we only need to emulate a small portion of the legacy 4310 commands. But it's another example of the versatility of the 340, whereas on the 4310 with its sigmatel processor, I had a lot of trouble compiling useful binaries that would execute on it for various troubleshooting and QA activity.
I only bring some of these points up because the 340 may be an interesting and useful endpoint for other vendors who may wish to evaluate and use our product in other ways than just the Appspace route. -
What about TWO different serial numbers in macOs (about this mac window) and on the foot of the mac. This mac was not purchased as a refurbished nor has been sent for servicing on any time since purchasing...
The one in MacOs is answering : "This is not a valid Apple Product serial number" when i try to check the iMac 1TB Seagate Hard Drive Replacement Program...You will need to check with Apple - might be a good idea to take it to a Genius Bar so they can see it for themselves (and the diagnosis is free).
-
USB net stick will not work and not recognized by brand new macbook pro lion
Hi and thank you to anyone that can help!
I just bought a new macbook pro with OX 10.7 Lion the other day. I have an Alcatel x220 USB internet net stick that I used to use with my previous computer with Windows 7.
When I insert the usb stick, the setup driver is supposed to come up, so I can install it on the Macbook. But nothing comes up, and the macbook does not even recognize that I have inserted the net stick.
I also downloaded the program, and the drivers, and still nothing. The apple people tried fixing it for a few hours today, and they can't figure it out either. Same with the cell phone company that provides me with the net stick. No one has any idea how to fix it.
Basically, anyone have any idea how to get the USB net stick Alcatel x220 to work with a new macbook pro OS Lion 10.7?!?!?!?!? This is driving me crazy, and I would really appreciate anyones' help! Thank you!!
Danielthanks I appreciate your response. Yeah I read something about the 64 bit problem. I found this link and at the bottom there is a driver update or something to make it work with 64 bit. But I can't seem to get it to work right, and even could the apple tech people. This is the link: http://www.alcatelonetouch.com/global-en/products/mobile_broadband/ot-x220.html
Also, do you have any idea which USB sticks there are that are compatible with the 64 bit Lion?
Thanks again -
Can I use a memory stick to back up my MacBook Air and what size do I need?
i Have a MacBook air , processor 1.3 Ghz Intel core i5, 4GB 1600 MHz DDR3 memory. Operating on OS X Yosemite Version 10.10.1.
it will not open up Safari, it crashed out of Safari with an error message and will not ooen it up now however many times I try. I was reading Daily Mail on line at the time. I can get onto the Internet by using Chrome but it feels as if Chrome is in charge of me rather than the other way round. when I type in an address it just takes me where it wants to go rather than the website I want to to. I now want to back up my data but left my drive in UK (I am in USA at the moment.) so wondered if I can back all my data (very important data) on to a memory stick so I can wipe my computer and start again. I have an appointment with a techie at the Apple shop on Saturday but need to back up my data before the appointment, so not sure what to do.
ALso my IPad is very unstable after using the Daily Mail site, it has always seemed to be fine before but this weekend seems to have created problems for both my MacBook Air and IPad Mini...You'd probably be better served to use a conventional external USB:
http://eshop.macsales.com/shop/firewire/
Easier to use, harder to lose and more dependable.
http://www.tomshardware.com/answers/id-1772735/usb-flash-drives-reliable-externa l-hdds.html
"generally speaking, a HDD (or SSD) is always going to be more reliable than a flash drive. USB flash drives are made to TRANSFER files, not to store them. Still, you get what you pay for, and I have had a few flash drives that have lasted a very long time" -
Over the last week or so I have been trawling the internet looking for references to weak wifi signals on the Ipad2 and was staggered by the sheer quantity of people who seem to have identical issues, not just with the ipad2 but also with the new ipad. What annoyed me most from reading the reams upon reams of comments made on the Apple community forum is the fairly large number of people who seemed to believe that 'these' people were either just moaners and wingers or else they must have something wrong with their router set-up rather than a serious fault with their ipad and it seems all because there ipad in question works like a dream.
Obviously I can only speak from my experience, and that is, I have an ipad2 32GB with wifi, purchased about 6 months ago and it works like dream with a good 2-3 bar wifi signal through 2 thick stone walls over 30 feet away. My router is a standard one supplied by my broadband supplier compatible with all 'g','b' and 'n' equipment. However, over a week ago now I bought second hand genuine ipad2 16GB with wifi from a close friend who has just purchased a new ipad3 to replace his old ipad2 (had it for over a year so no longer under warranty). When I started it up downstairs from my router, where I always use my other ipad2 which has a very strong wifi signal, I discovered that the new secondhand ipad2 I had purchased couldnt find a network signal at all. So after doing network resets and all other 'fixes' on the device recommended, I took it upstairs to my office where the router is based and found that the device could now locate the network, but the signal was lost over only 12 feet from the router!
I quizzed my good friend about this issue and he informed me that it has always been like this since he first purchased it and he never thought that it was a fault, it was just the way it was. When he first aquired the device he did think at the time that this distance was poor, but thought nothing of it as he didnt have any other ipad to measur ethe signal strength against, and as his router was in his living room anyway he nothing of it. Fair enough.
So, there we have it. One ipad2 with a very good wifi signal and another ipad2 with a very poor wifi signal running off the same router, both with the same IOS 5.0. ?
As well as all of the other isues that customers have picked up on, such as 'death grip' (which I must say does appear to happen, but personally i dont think that this is a serious issue if you are aware of this issue and have a strong signal anyway), my experience seems to be a good example of a 'duff' wifi ipad versus a 'great' wifi ipad', an issue confirmed by complaints from a fairly large number of customers who have also reported the same or similar weak wifi signals with both the ipad2 and the ipad3. So, as this shows the weak wifi signal is a very real issue it seems on a batch of ipad2 and 3's, which to my logic is obviously a hardware issue on a batch of early ipad2's and not a software one, otherwise all ipad's would suffer this problem! So, is it a faulty antenna or a faukty network card in an early batch?
So, the bottom line now is, of course, firstly, how can I get Apple to fix my other ipad2 when the warranty has run out? Any suggestions anyone?
Personally I think good Apple customer service should offer a recall with a replacement on this apparent batch of ipads, dont you?Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M. -
My problem started when I found a trojan (win32/skeeyah.B!plock) in my computer. Both Windows Defender and Malwarebytes detected it and claimed to remove it, but to be sure it was gone (I read online that it's hard to get rid of that one) I decided to perform a reset. I chose the deep reset option, it took about 5 hours to reach 92%, and then I got a message that the reset had failed. It gave me some options, and I chose to repair windows so I could keep using my machine. I had to set it all up again, like windows was really installed again. It seems to be working fine but it's a bit sluggish, and it bothers me that the reset failure might have left some broken files.
After testing it for a while, my only problem other than sluggishness was that I couldn't install google chrome ("Clickonce_bootstrap.exe - system error" was the message I got when the installation failed) but it bothered me enough to want to perform a refresh, to fix anything that might have been left broken. When I tried to do this, I got a message asking me if I trusted the source of the files that were attempting to perform changes on my computer, and listed my own hard drive as the source. I chose to trust it, and then I got a message telling me that the files needed to perform the refresh weren't in my computer, so I was prompted to insert the install disks. They didn't come with my laptop (Dell Inspiron), but I saved the installation files into a usb stick before doing the reset (Using Dell Recovery and Back Up), so I inserted the usb, and it told me that these weren't the right files. After that, my only option was "Cancel". Same thing happened for both refresh and reset.
Like I said, the computer seems to be functional, but I'm afraid the system might be unstable and crash on me randomly. Is there anything I can do?Do not reinstall Windows 8, it is obsolete. Instead make installation media for Windows 8.1 with Update 1:
http://dellwindowsreinstallationguide.com/download-microsoft-windows-and-office/download-microsoft-windows/download-windows-8-1-retail-and-oem-iso/
The only problem is selecting the correct edition likely Windows 8.1 or Windows 8.1 Single Language.
Use DISKPART → CLEAN ALL:
http://dellwindowsreinstallationguide.com/cleaning-up-a-drive-format-vs-secure-wipe-ssd-and-hdd/
Then install Windows 8.1 with update 1 directly:
http://dellwindowsreinstallationguide.com/a-clean-install-of-windows/a-clean-install-of-windows-8-1/windows-8-1-installation/
You can install with a local account, then install the system drivers in the correct order:
http://dellwindowsreinstallationguide.com/downloading-drivers-checking-hardware-ids-and-downloading-and-installing-dell-system-drivers-in-the-correct-order/driver-installation/
If you need help identifying variants provide hardware IDs:
http://dellwindowsreinstallationguide.com/downloading-drivers-checking-hardware-ids-and-downloading-and-installing-dell-system-drivers-in-the-correct-order/checking-hardware-ids-in-the-device-manager/
After installation of the drivers you may then install Dell Backup and Recovery the latest version is here:
http://downloads.dell.com/FOLDER02909509M/1/Backup-and-Recovery_Application_64M9D_WN32_1.8.1.71_A00.EXE
This will create a new recovery partition on your system that is Windows 8.1 with Update 1. You may then switch for a Microsoft Account.
Maybe you are looking for
-
I've just about had it with Failed Downloads.
This is a normal thing when it comes to Large File Downloads, and it needs to be addressed. I can understand the download being stopped if there is some sort of connection error, or my computer goes to sleep... But for the LOVE of me, I can't effing
-
How do I print or export a full list of my Purchased Apps?
I can see all my apps through my app history but it's spread over three pages. I manage the apps on 5 different devices. How do I see a full list? I'm fine with exporting or printing a full screen. Thanks!
-
Does FireFox have a security icon like other internet browsers like Safari?
FireFox have a security icon like other internet browsers like Safari?
-
UWL Configuration Document for EP 7.0
Dear all, We are on EP 7 and trying to configure the UWL. I have a few documentation on the configuration of UWL (not sure whether is works for EP 7). When i try to Registering System Item Types with the UWL, i can see the following option which is d
-
How to delete photos in photostream
How do I delete photos in my photostream that are showing up on both my iPhone and iPod that I do not want on there? Thanks.