Footnotes and Endnotes greyed

I am trying to add endnotes to my document but I cannot select the drop down menus to do so. I tried adding a superscripted number first, selecting and unselecting text, but I cannot click the drop down menu.
Any thoughts??

The difference is logical.
Notes apply to the main text layer of Word Processing documents.
There is no such a layer in a Layout document.
Every text block has the same status.
I agree that some explanations in the Help are not precise enough and fail to make the difference.
Yvan KOENIG (from FRANCE mardi 5 août 2008 19:20:53)

Similar Messages

  • How to place footnotes and endnotes on the same page?

    I have a word document with nearly about 64 footnotes and 500 endnotes. Endnotes are basically references guiding to other sources which are quoted in the book.
    My client has asked me to place all endnotes (references) of each page at the bottom of the page itself along with footnotes, but they shouldn't merge with footnotes. The reason for that he related that it makes easier for the reader to check the reference of the quote immediately at the bottom of the page, instead of flipping over all the pages and going to the end of the book everytime.
    How to do this? Can anyone enlighten me?

    Endnote placeholders are usually customizable to wherever you want them to be.
    How to do this? Can anyone enlighten me?
    I'm not sure if you're asking this question from a aesthetic design perspective or from a functionality perspective.
    Either way, I guess this link should give you some clarity: http://carijansen.com/2010/11/13/footnotes-and-endnotes-with-indesign/
    Also, there is already a thread in this forum that should answer your question - http://forums.adobe.com/thread/681891
    You may also want to review these links for cross-referencing that cuts down lot of time which came out in CS4 by request:
    http://www.adobe.com/designcenter-archive/indesign/articles/lrvid4024_id.html
    http://www.adobepress.com/articles/article.asp?p=1332860&seqNum=5
    Message was edited by: Sudarshan Thiagarajan
    Reason: A couple of more links to detail cross-referencing feature

  • Uppercase commas with footnotes and endnotes?

    In some non-fiction Pages documents I want to add endnotes citing scientific papers written by others that support the statements I am making.
    I know how to do this by adding footnotes or endnotes through the Inspector and I know how to have those numbers be consecutive. So far so good.
    When I add two footnote numbers, such as 1 and 2, those smaller-font numbers sit in the top area of the line. So far so good.
    But....if I want to add a comma between the numbers, that commas ends up on the bottom part of the sentence line where commas and periods
    normally land. That's not where I want the commas.
    How do I add a comma, or hyphen for that matter, between the two smaller-font footnote numbers, without that comma or hyphen ending up
    underneath those footnote numbers?
    Thanks
    Panther

    Jerry,
    If no one told you today, yet, that you are a genius, then you have now been told!
    Thank you so much for coming up with a solution that makes me look GREAT in the eyes of my wife because she is the one writing the scientific paper.
    This problem is officially solved and I will punch the nose of anyone who says differently!
    Panther

  • Can you use footnotes AND endnotes in the same document?

    I just found out today that I have to have both footnotes (for comments and annotations) and section endnotes (for citations), to follow the formatting guidelines for my thesis... do you know if it's possible to use both with Pages '09?  I've spent a long time formatting as it is and really don't want to transfer my document to Word or anything (since I'll lose some of my settings)...  I would appreciate any suggestions!  Thanks!

    The style of footnote/endnote is part of the Document settings so it appears that only one applies per document.
    You could switch between them and copy the endnotes as ordinary text into a document which has footnotes.
    That would be the only workaround I can think of.
    Peter

  • Footnotes from EndNote

    So, I have all of my references in an EndNote file, and I am now using them in my Pages document. I know that I can do the references page with this, but as far as in-text citations are concerned, I was wondering if I could do footnotes using EndNote input. And if I can do this, how would I go about doing that? Thanks!

    Create the footnote first and then put the citation into the footnote. Endnote cannot access the Insert Footnote command, so you do that then insert the reference you want there.

  • Footnotes and Bibliography?

    It appears that Apple has overlooked the ability to create footnotes and a bibiography in iBooks Author. (yet it's specifically targeted at the academic textbook market) Can this possibly be true???

    I accidentally found out that iBooks Author will support footnotes! But you have to create them in another application first.
    So here's my story. I use Scrivener 2.2 to create my books. But I really want to use iBooks Author to spice up the final product. I had text for a book typed in Scrivener, with footnotes already created. I copied and pasted them into iBooks Author and lo and behold, all of the footnotes were insterted at the end of the section in iBooks Author as endnotes!
    The footnote numbers appeared by the text, and then at the end of the section, the footnote number appeared along with the note, I was also able to go to a footnote and decrease the size of the footnote number (which I like to be smaller than the chapter text). Heck, I'll just show you...
    Here are screenshots (it's an old journal of my that I am footnoting). First screenshot is what it looks like in Scrivener, text on the left, footnotes on the right:
    I naïvely copied and pasted this text into IBooks. Lucky for me, this is how it came out in iBooks Author:
    I didn't realize that I had found a work-around for this footnote problem until I tried adding more footnotes while working in iBooks Author (which led me to these posts). So here's proof that if you create footnotes in another program, at least iBooks Author will recognize and create footnotes for you and put them at the end of the section. I figure it's better than nothing, but not very elegant for such an elegant program. Again, I am also able to change the font size of any footnote number or the text in a footnote.
    By the way, if you use this copy and paste method, just make sure you copy and paste an entire chapter all at once. When I copied and pasted paragraph by paragraph, it reordered the numbers back to footnote 1 in each paragraph, and you don't want to re-number them by hand.
    If anyone else has tried copying and pasting with another word processor with the same result, please let us all know.
    You might be thinking, what's the point of all of this if I have to use two word processors? I think of iBooks Author as my last step, not a word processor. I don't plan on creating my book drafts in it (I've tried, I don't think it's very efficient), I've decided I just want to use iBoooks Author to layout the final content that I created using another word processor, one that has all of the tools I need for efficient writing. Pages, Word or maybe even TextEdit might also work for writing your draft. Since the stuff I write needs footnotes or endnotes, I really don't know of any other options at present if I want to use iBooks Author.

  • I updated my iPhone and now none of the music on it will play. When I sync, I can change teh music selections on it, but they all won't play and are greyed out. Only the Playlists, Artists, Albums are black font, but all songs are grey and won't play

    I recently updated my iPhone 3G to 5.0 (9A334) and it was somehow interrupted during restoration, or at least that is what it tells me. But it keeps making a new restore and adding it to a list, but never gets through without getting interrupted. anyways, I kind of got through all that, but now all the music on the iPhone won't play and is greyed out. I had some APPs greyed out, but they are not as important. Music is a huge investment in my life and this part of it has gone silent. I SYNC with my iMac. Resyncing doesn't help. I can change the selections, but can never get them to play on the iPhone.
    Any ideas?

    I'm having the same issue, i restored my phone to Factory settings, even tried restoring it to my backup, half of my music bought from itunes won't play on my iphone and i'm super annoyed, this only happened once i updated to ios 7.2 so i assume its another glitch to go with my imessages not sending, getting sick of this.

  • My internal hard drive wont show on the desktop and is greyed out in the finder

    My Internal drive will not show up on the desktop, and appears greyed out in the finder.
    it shows up fine in disk utility and i have tried to repair permissions. This runs normally, there does not seem to be any problems with the drive itself.
    if i unhide the hidden system folders using terminal, it appears on my desktop again, but greyed out.
    any ideas how i can fix this?

    Try deleting the Finder .plists. You need to look in your user Library/Preferences for the .plist. Hold down the option key while using the Finder “Go To Folder” command. Enter ~/Library/Preferences.  Move the .plist(s) to your desktop.
    Relaunch Finder and test. If it works okay, delete the plist(s) from the desktop.
    If the Finder is the same, return the .plist(s) to where you got them from, overwriting the newer ones.
    If you prefer to make your user library permanently visible, use the Terminal command found below.
    http://osxdaily.com/2011/07/04/show-library-directory-in-mac-os-x-lion/
    You might want to bookmark the command. I had to use it again after I installed 10.8.2. I have also been informed that if you drag the user library to Finder it will remain visible.
    If that doesn't work, try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
    Isolating an issue by using another user account
    If the problem is still there, try booting into the Safe Mode.  Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application unistaller. For each disable/delete, you will need to restart if you don't do them all at once.
    Safe Mode
    Safe Mode - About
    General information.
    Isolating issues in Mac OS X
    Troubleshooting Permission Issues
    Step by Step to Fix Your Mac

  • Looking for a script to connect bodytext to footnote and cross-references

    Hi,
    Need to do the following:
    I was provided with separate (tagged-text) files: bodytext, (foot)notes and cross-references. Now I am looking for a solution (script?) that can do the following:
    to restore the connection between the body-text, the footnotes and te cross-references after placing these in a document in Indesign.
    The cross-references should appear (in anchored text-frames) in the margin and the notes in a separate frame at the bottom of the page. If possible in the same way as footnotes in Indesign appear, but in a separate frame to be able to do some more formatting than native footnotes would accept.
    I have tested the plugin: Side Heads from InTools, and tis works well with Indesign files tthat contain footnotes. But this doesn't work with separately placed footnotes from a tagged-text-file, as they re not knotted together.
    I can't do any scripting myself.
    I would appreciate any help, and I am looking forward to your response...
    Regards,
    kkingg

    The first thing to do is:
    regexp "match regexp = ([0-9]+)" $_cli_result match count
    if $count eq 0
    exit 0
    end
    The second is a bit more challenging.  I think this will work:
    cli command "show call active voice br"
    foreach line $_cli_result "\n"
    regexp "^([0-9a-zA-Z]+) : " $line match callid
    if $_regexp_result eq 1
      continue
    end
    regexp "^dur 1d" $line
    if $_regexp_result eq 1
      cli command "show call active voice br | section $callid"
      syslog msg "$_cli_result"
    end
    end

  • Sometimes, when I click on a link, I see in the address bar the words: "Search bookmarks and history" (greyed out) just before I am taken to the link. Should I be worried? Is someone searching my personal data? Is this just a FireFox error msg?

    Sometimes, when I click a link on a web page, I see in the address bar the words: "Search bookmarks and history" (greyed out) just before I am taken to the link I clicked. A moment later, when I'm at the link, its address appears in the address bar, and all is normal. It seems that this happens only from some particular sites. Is FireFox reporting that my bookmarks and history are being searched?
    Should I be worried? Is someone searching my personal data? Is this just a FireFox error msg when it has trouble finding the website I requested?

    That is OK. Firefox will only display the link in the location bar after the DNS look up has succeeded and a connection to the server has been established. Until that has been done you see the default setting for the location bar: Tools > Options > Privacy > Location Bar: When using the location bar, suggest

  • I didn't close my mac air down properly and when i tried to use it, the screen was frozen.  I turned it off and restarted it, and the grey screen with the apple logo appear and the circle just keeps spinning.  Can you advise?

    i didn't close my mac air down properly and when i tried to use it, the screen was frozen.  I turned it off and restarted it, and the grey screen with the apple logo appear and the circle just keeps spinning.  Can you advise?

    Try resetting the SMC
    Intel-based Macs: Resetting the System Management Controller (SMC)

  • Hi.have a g5 mac,dual core 2.3 unit.i bought it with no hard drive.have got hard drive,formatted for mac.i am trying to load osx.i get a grey screen with a small box in the centre with 2 character faces,and then grey apple with loading icon spinning.help?

    hi.have a g5 mac,dual core 2.3 unit.i bought it with no hard drive.have got hard drive,formatted for mac.i am trying to load osx.i get a grey screen with a small box in the centre with 2 character faces,and then grey apple with loading icon spinning.nothing is loading tho.

    I see 10.6.3 in your profile---is tthat what you are trying to load? If so, it won't work. No PowerPC Mac like your G5 can run a Mac OS version higher than 10.5.8

  • How can I adjust the space between the dividing line of the footnotes and the continuous text?

    How can I adjust the space between the dividing line of the footnotes and the continuous text?

    I want to extend the space so the dividing line does not stuck to the normal (continuous) text in my thesis. Do you have a solution? That would be perfect. Thanks a lot!

  • TS1347 Just downloaded ios7 on my iPad2. Hate that I cannot see the items in my calendar. The letters are way too small and are grey in color. I need the fonts to be dark and very defined...I have health issues-poor vision.

    Just downloaded ios7 on my iPad2. Hate that I cannot see the items in my calendar. The letters are way too small and are grey in color. I need the fonts to be dark and very defined...I have health issues-poor vision.

    Settings>General>Accessibility>Increase Contrast
    Settings>General>Accessibility>Bold Text
    are some settings that may help.
    There are other settings there ...they may not be to your liking but try them all anyways.
    But that's about all you can do for now...except to voice your opinion to Apple here:
    http://www.apple.com/feedback/ipad.html

  • I cannot access Content Library in iMovie - Content Library doesn't show on the iMovie screen and is greyed out when accessed through "windows" tab at the top. Also unable to update the projects/events (a suggested solution for a similar question).

    I cannot access Content Library in iMovie - Content Library doesn't show on the iMovie screen and is greyed out when accessed through "windows" tab at the top. Also unable to update the projects/events (a suggested solution for a similar question). I haven't had this issue before, I have always used the content library on the screen but haven't used this for about a month. How can I make the Content Library available?

    Thanks so much! I am backing up the entire computer now with an external hard drive - this should be fine right? And surely if I am backing up the whole computer these projects/videos will be backed up too? I wasn't sure how to do this any other way and I am clearly not great with tech issues. Once this is done and I am sure my projects/videos are safe I will do the delete and reinstall bit. Thanks for taking the time to help

Maybe you are looking for

  • Hp W2072a Monitor

    Everytime i scroll up or down my screen makes multiple mini images of whats on my desktop. all horizonal to one another. How can i fix this? it also have blurry black bars inbetween the images. everytime i scoll up or down when browing the net this p

  • How do i convert avi to h.264?

    i have quicktime pro 7 and i would like to convert some of my home movies which are avi files to h.264 file but it wont play the avi files or convert them correctly. can anyone help with a solution?

  • Procedural/Workflow question

    Hi all, After finishing the CS6 Production Premium book, I decided to start afresh with the projects I am busy with. Last Friday we shot some more footage of one of the ships we are using. I have around 11 Scenes shot, a few takes of each. Following

  • Recieve email but unable to send

    I am able to recieve email but every time I try to reply to an email the reply sits in the outbox and even a message that the mail has not been sent and the mail remains in the outbox.  I have checked all my a ccount settings and they seem fine.  Any

  • How to transport variants

    Hi Experts , I have to creat few variants to be used in Information Broadcasting. How these variants are to be transported I dn't know. Please let me know the step by step process. Thanks, Uday.