FOR A PROJECT I NEED 2 PRINTER THAT IS NOT "MADE IN CHINA"

hi,
we are a engineering company based in TURKEY.
We got a projectabroad but they insist us not to use any "made in china" products even printers. we have to find 2 printers whicH is not made in China.
PLEASE CAN YOU DIRECT US SOME SELLERS OR HP PRODUCTION DEPARTMENT
THANKS IN ADVANCE
here is what they want:
1) Alarm/Event printer:
it shall be black and white letter quality laser printer.
it shall have a speed of 10 pm or greater in draft mode.
black ribbon (quantity 4)
the printer shall be HP Laser Jet or equal
WE CHOSE FOR THIS ONE : HP Q5401A LASERJET 4250 N
 2) Color and report printer:
shall produce Ink Jet quality monochrome print at min. output rate of 10pm 
shall also produce InkJet quality color prints with a min. resulation of 1200 dpi at min rate of 6 pm.
shall be RISC based and support ethernet connectivity
shall be supplied complete with a min of 128 MRAM  interconnecting parallel cable and spare monochrome and color toner cartridges.
shall be HP INK JET Series
 WE CHOSE FOR THIS ONE :HP CB041B OFFICE JET K1700 COLOUR INKJET
This question was solved.
View Solution.

Almost all HP printers are manufactured in China, Malaysia and Thailand and Mexico. Their serial Numbers will start with CN, MY, TH and MX respectively. I'm not sure of how to obtain printers from a specific location from any HP outlets. You'll probably have to go to the store and view the Serial number on the box before buying it.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

Similar Messages

  • Scanning Pictures for HD Project I Need Advice

    I am about to *Scan Pictures for HD Project* I Need Advice. The scanner is a HP Scanjet G4050 my questions are:
    1: At what resolution do I scan these pictures _+(300 or highest dpi available)+_
    2: What color choice is necessary *(RGB vs CMYK)*
    3: Can you please suggest points for creating a backdrop for the pictures (various sizes) in the Timeline
    Thanks in advance

    Scan the picture like you normally would. If the vertical resolution is 1080, you are fine. Don't worry about the 1280 width as black will be in that area not taken up with the photo. That part won't matter if it isn't 1280 if it is a vertical picture. If you don't have at least 1080 high, you might want to re-scan at a higher resolution. If you have it say, 2000 pixels high really no big deal except you don't need it that high and all that extra size slows down your system. If you want it at a lower resolution after you scan go into Photoshop->Image->Image size. Be sure and check "Constrain Proportions" before you change the dimensions in the top box for the height (where you are best using the units as pixels) That way the picture will stay in proportion. Don't use this second method to 'add' more pixels as the quality suffers when you go up this way. Rescan if you want MORE pixels.
    All the above is talking about vertical pictures. If you have a really wide photo that is not very tall, use the same principle but keep the width constant. For example let's say you have a 2x6 inch photo. Make sure the width is at least 1280 pixels. Don't worry that the height will be less than 1080 because black will take up that space.
    If you are going to do any zoom in and/or panning across a picture, you'll need to make sure it has more than the minimum pixels. For me a little goes a long way, so I zoom in slowly maybe 10-15%.
    Sharon

  • I need to use up all my credits in ITunes but only have $.25. How do I do this as nothing is worth $.25? The reason I need to do this is to change my country for purchases on my Credit Card that is not a US credit card

    I need to use up all my credits in ITunes but only have $.25. How do I do this as nothing is worth $.25? The reason I need to do this is to change my country for purchases on my Credit Card that is not a US credit card

    Click here and ask the iTunes Store staff to zero your account balance.
    (114902)

  • Looking for a for an all-in-one printer that is compatible with greeting card programs..​.

    looking for a for an all-in-one printer that is compatible with greeting card programs...my original one was an HP PSC  1510...replaced it with a Deskjet 1050 & it does not work...any suggestions?

    I bought an epson xp650 a couple of months ago and cannot fault it. It does everything I require and it is the wifi model so I can print directly from my ipad/iphone. Not sure if you are asking about the colour of the unit or just to be able to print black and white, Obviously all printers will print black and white but just to give you a little more info the printer I bought is the white version and it looks really nice sat next to my imac 27''
    Hope this helps.

  • What is the best charging cable for the iPad Air (that is not made by Apple)? I need a long cable (over 6ft or more). I also need the cable to be of high quality and the cord part of the cable to be made of strong material.

    What is the best charging cable for the iPad Air (that is not made by Apple)? I need a long cable (over 6ft or more). I also need the cable to be of high quality and the cord part of the cable to be made of strong material. Apple does not make one this long. Is there a cable out there that is sturdy like this and is safe to use?

    yes, but I'm trying to use my iPad to type notes (using pages) and I have the smart case which I use as a stand. I need a cable long enough to fit through the back of my desk and the charging brick for the iPad won't fit behind the desk. I have to put it on the floor and then the apple cables aren't long enough to reach.

  • Printing pictures via bluetooth to a bluetooth printer that is not online

    i was wondering if iphone will be able to send a picture or file to a bluetooth printer that is not online i'm out in the field alot and need to print pictures right there i have a bluetooth printer in my van. my old phone would send via bluetooth and i could give customer the pic at that time instead of having to bring them back to the customer. please advise
    thank you
    jimski3332002

    I suppose that would depend on the model of the printer, some print companies provide apps for wireless printing to certain models. But if the printer isn't online and you're looking for a BlueTooth only type of connection, it still may be a good idea to check out the app store to see if the makers of your particular printer have written an app making it possible for you to do so.

  • How do you share an iMovie project to DVD now that iDVD not available

    How do you share an iMovie project to DVD now that IDVD not available on iMAC? Thanks.

    Hi
    If there is no iDVD on Your Mac (and it's not on newer Macs as Apple discarded it) then You need a program that can do this.
    Your Mac can burn CDs and DVDs - BUT DVD as Data-DVDs not as Video-DVDs - they need a program to be encoded and STRUCTURED as such.
    • iDVD is part of the boxed version of iLife'11 and can only be bought outside Apple as on Amazon and e-bay
    • DVD Studio pro - Part of FinalCut Studio Pro bundle - this to has expired and can only be bought second handed. (High price and tough learning Curve - but best ever done.)
    • Roxio Toast™ - Not as elegant as iDVD - but has many other positive additions (I like it as 10-Pro incl BD-component) (now version 11)
    • Burn - only free alternative I know of on Internet. Very simple - Just for doing a plain Video-DVD
    Burn http://www.digital-digest.com/software/Burn.html
    only You can buy from Apple is
    • FinalCut Pro-X which also can burn to DVD but without any nice themes.
    AppleMan1958
    You can also buy Compressor from Apple for $50 US. It will also create DVD and Blu-Ray but without the nice themes.
    Yours Bengt W

  • "This project contains a sequence that could not be opened."

    Hello everybody.
    I have a problem with my premiere C6. Whenever I tried to open a specific project (the one I am working on), the follow message pops up and I cannot access the project. Even when I open premiere and "open recent"
    Here's the message:
    "This project contained a sequence that could not be opened. No sequence preview preset file or codec could be associated with this sequence type."
    I don't know what to do. One day everything is fine, the next one I can't work.
    Please help.
    Thank you in advance.

    I've only recently updated to Premiere Pro CC and had a similar issue.
    When opening a CS6 file in CC2014, I received this alert:
    "The preset used by one or more sequences in this project requires third-party components that could not be located. These sequences will be modified to use a custom setting instead..."
    The file would open and I was able to make changes and even save seemingly without any issues. However, when I attempted to open the file again, I was given the alert that you posted here:
    "This Project contained a sequence that could not be opened. No sequence preview preset file or codec could be associated with this sequence type."
    The problem seemed to originate when a "custom setting" was generated for CC2014 to open the project.
    What I did to fix the issue was AS SOON AS I OPENED the older version in Premiere CC, I would immediately go to the Sequence Settings for EVERY sequence in the file and create my own custom settings based on my project. Once that was done, I could begin working on the project and it would save and open without issue. This only needs to be done the first time you open an older version of your project before making any changes or saving the file.
    I discovered that the "Custom Setting" that is originally generated when converting the older version to the new, created a funky "Video Preview" size of 16x16 pixels. Once I put all the settings in order, Premiere CC was happy again.
    Still haven't figured out a fix for the random crash during operation and the almost guaranteed crash when quitting Premiere from the top menu bar.
    PS Mark Mapes, I did try the fixed that you linked to in your post but they did not do the trick for me. Is there any updated you know of on the horizon? Thanks.

  • Why is it that when I try to open a project, it says "the project contained a sequence that could not be opened. No sequence preview preset file or codec could be associated with this sequence type"?

    It could be opened last night but today it just kept showing "the project contained a sequence that could not be opened. No sequence preview preset file or codec could be associated with this sequence type". I really need to access my video.
    Some help out there, please?

    Hi,
    Please check this out : https://forums.adobe.com/message/4626663#4626663#4626663
    Thank You
    Arjun

  • HP deskjet 3520 ink cartridge problem...​Can anyone suggest another make of printer that is not HP?

    Hello...I have yet to receive an answer that resolves the problem. I regret buying the printer because now it doesn't work. The error message remains despite taking advice how to fix it. 
    We only use the black cartridge.
    Can anyone suggest another make of printer that is not HP?
    Thanks in advance. I am in the UK and need to print urgently.
    This question was solved.
    View Solution.

    Hello...problem resolved...many thanks.

  • Premiere pro CC 2014 - Project contained a sequence that could not be opened

    Hi,
    I've got serious issues, I just spent hours working on a project in CC 2014 and I closed and tried to reopen in and its now telling me that 'The project contains a sequence that could not be opened.'.
    The file is permanently jammed in this state, what do I do from here?
    Please help!!
    Mark

    First, this can happen ... you do have auto-saves set for every so often, right? Do a manual save-as every now and then? Right? ... Hope so ...
    If you've got autosaves "on" you can of course go to the last saved save. Depending on your time betwixt saves, you might lose some work. Better than everything, of course.
    If not ... there'll be help from others here. Hoping you get this taken care of ...
    Neil

  • Persistent Premiere Pro CC 2014 error message: "This project contains a sequence that could not be opened..."

    I've been working on a project and everything was working fine. I close the program and reopened it an hour later. Now, I keep getting this error message: "This project contains a sequence that could not be opened. No sequence preview preset file or codec could be associated with this sequence type."
    I attempted to use one of the Adobe suggested solutions... opening a new project, clicking on the "Help" Tab and deactivating, but the tab doesn't have that option. I'm also a little afraid to uninstall and re-install premiere pro, the other suggestion, because I'm worried about losing my files.
    I would be grateful if anyone could help me.
    Thank you very much.

    Features and Sequence Presets missing | Adobe Premiere Pro CS6
    FAQ: Why are some codecs and sequence presets missing from my installation of Premiere Pro?
    What to do when you get a preview preset codec error in Adobe Premiere Pro CS6 | Val Gameiro, Writer, Director, Filmmake…
    if you try the project repair from Val's blog you will need to unzip the .prproj file to get access to the xml file.

  • Premiere Pro CC Error: "This project contained a sequence that could not be opened..."

    I know this problem has been reported previously with Premiere Pro CC (I run 2014). When opening up a recent project, I keep getting this: "Error Adobe Premiere Pro: This project contained a sequence that could not be opened. No sequence preview preset file or codec could be associated with this sequence type." The only solutionm is to open another project, sign ou, then sign in before I get open that other project. This has become a pain...  Is there a permanent fix for this issue that has been reported for quite a while now?
    Thanks for your help.
    Marc

    Hi Marc-Andre d'Anjou,
    I am sorry to hear you're having trouble with this issue. It happens sometimes because of activation problems. The doc that Rameez points to is missing steps for reactivating the Creative Cloud version of Premiere Pro. For Premiere Pro CC, and later, see the section "How to deactivate or sign out" in this document. See the section "How to activate or sign in" in the same document to activate Premiere Pro once more.
    See also this FAQ: FAQ: Why are some codecs and sequence presets missing from my installation of Premiere Pro?
    Thanks,
    Kevin

  • Can Flex Limit the Number of Prints that can be made?

    Is there a way to create a Flex app to limit the number of
    prints that can be made from it? I need to limit a coupon that
    prints out, and I'm new to Flex. Is this possible to be created? Is
    anyone interested in possibly contracting this job? This is a
    serious inquiry. Email me if you have an idea, and a quote.
    [email protected]

    No. Printing is either permitted or not, but there is no way any document can control the print quantity.

  • HP Photosmart Premium C310a printer that will NOT print in BLACK. It will print in color.

    I have a Photosmart Premium C310 a printer that will NOT print in BLACK.  I tried the unplugging the cord and holding # and 3 and it did not work for me.  I, at first, purchased a new cartridge thinking it had run out of ink.........so now I am out $25.00.
    Any other suggestions.  It does print in color.    HELP! HELP!   The printer is not even 5 months old. 

    Can I ask are you based in the US?
    Thanks, Ciara
    Although I am an HP employee, I am speaking for myself and not for HP.
    Twitter: @Ciara_B_HP

Maybe you are looking for