For all people with video capture problem
For all people who have trouble with video capture here is the Link
thnx rus,
I had no problems with ViVo, but this file is tiny.
No frills, just what it's meant to do..
:D :D :D
(will test thorough later on)
Similar Messages
-
Problem with Video capture Device
i have a problem with FME. i am using Avermedia TV capture
device and Canon 3ccd Digital Video Camcorder ( PAL ) when i open
the FME interface the warning given for " Problem with Video
Capture Device".
i read all the topics in Flash Media Encoder Category, if
this problem occures my capture device ( i expect MPEG ) how to
solve this problem?
Thanks,The Device Matrix is something we'll be updating in the
future as we continue to test more and more equipement. Ideally, I
would like for users such as yourselves to be able to add to it and
tell us what has worked for you as well. If anyone has any ideas
about what technology we should use to do this (e.g., this forum? a
wiki?) please let me know.
Regarding the devices not working - the main problem we see
is that the system requirements are not being met. Here is what to
check for:
- are you running on Windows XP (only supported OS right
now)?
- do you have DirectX client runtime version 9c or higher
installed?
- do you have hardware acceleration enabled?
- do you have 32bit graphics enabled?
- do you have the latest direct show drivers from the
card/device manufacturer?
Thanks,
Chris Hock
Adobe Systems Inc. -
FMLE 3.0.0.4743 Problem with video capture device
log:
Tue May 05 2009 14:26:54 : Selected video input device: Beholder A/V Capture (SAA7135) [Slot 2]
Tue May 05 2009 14:26:54 : Selected audio input device: Beholder Aud Capture (SAA7135)
Tue May 05 2009 14:26:55 : Problem with video capture device. Please verify that the video capture device is working correctly and is not already in use.
Tue May 05 2009 14:26:56 : Audio Device Error : The selected audio device "Beholder Aud Capture (SAA7135)" doesn't allow setting volume intensity. Disabling the volume slider control.
Flash Media Encoder 2.5 working without any errorsThe second message that you are getting "The selected audio device "Beholder Aud Capture (SAA7135)" doesn't allow setting volume intensity. Disabling the volume slider control." is because your device does not let you change intensity of volume. This warning message is just to tell user that volume slider will remain disabled for the selecetd device. This is new addition in FMLE 3.0 and was not there in FMLE 2.5
Also for first message, please make sure that no other instance of FMLE is already running using this device. You can verify this from task manager. If any other instance of FMLE is running then please close that instance so that device gets free for new instance. -
Problem with video capture device, with a virtual camera
I try to use Adobe Flash Media Live Encoder 3 with a virtual camera(DirectShow Filter) but met such a problem:
"Error connecting input preview RGB filter."
"Failed with error 80004005:SetupInputVideoPreview(pFilter, pguidCategory)"
"Failed with error ffffff97:SetupVideoPreview(pFilterSource)"
"Problem with video capture device. Please verify that the video capture device is working correctly and is not already in use."
However, it is good to use AMCap,
what's the problem with FMLE.
Looking forward to your replies. Thx!Did you ever figure out the problem/solution?
I am experiencing the same thing with my virtual camera filter when connecting to FME?
Shawn -
iPhoto frustrating error..The volume for "Df23.JPG" cannot be found. It prompts for all photos with this issue rather than offering an option to ignore. I can find the images in spotlight but not in Find Photo. Does anyone have a solution?
Unless you have the source files that were on the TC or Windows machine you will have to start over with a new library as follows:
Start over from scratch with new library
Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
1. Move the existing library folder to the desktop.
2. Open the library package like this.
Click to view full size
3. Launch iPhoto and, when asked, select the option to create a new library.
4. Drag the Masters (iPhoto 11) folder from the iPhoto Library on the desktop into the open iPhoto window.
Click to view full size
This will create a new library with the same Events as the original library but will not keep the metadata, albums, books slideshows and other projects. Your original library will remain intact for further attempts at fixes is so desired.
OT -
For All Entries with two tables
Hi All,
Can we use FOR ALL ENTRIES with two tables. for example
SELECT * FROM MKPF INTO TABLE T_MKPF
WHERE BUDAT IN S_BUDAT.
SELECT * FROM MARA INTO TABLE T_MARA
WHERE MTART IN S_MTART AND
MAKTL IN S_MAKTL.
SELECT * FROM MSEG INTO TABLE T_MSEG
FOR ALL ENTRIES IN "T_MKPF AND T_MARA"
WHERE MBLNR EQ T_MKPF-MBLNR AND
MATNR EQ T_MARA-MATNR.
can we do it like this or any other way to do this plz tell. I waitting for your responce.
Thanks
JitendraHi,
u cannot do like this....chek some documentation on it..
1. duplicate rows are automatically removed
2. if the itab used in the clause is empty , all the rows in the source table will be selected .
3. performance degradation when using the clause on big tables.
Say for example you have the following abap code:
Select * from mara
For all entries in itab
Where matnr = itab-matnr.
If the actual source of the material list (represented here by itab) is actually another database table, like:
select matnr from mseg
into corresponding fields of table itab
where .
Then you could have used one sql statement that joins both tables.
Select t1.*
From mara t1, mseg t2
Where t1.matnr = t2.matnr
And T2 ..
So what are the drawbacks of using the "for all entires" instead of a join ?
At run time , in order to fulfill the "for all entries " request, the abap engine will generate several sql statements (for detailed information on this refer to note 48230). Regardless of which method the engine uses (union all, "or" or "in" predicates) If the itab is bigger then a few records, the abap engine will break the itab into parts, and rerun an sql statement several times in a loop. This rerun of the same sql statement , each time with different host values, is a source of resource waste because it may lead to re-reading of data pages.
returing to the above example , lets say that our itab contains 500 records and that the abap engine will be forced to run the following sql statement 50 times with a list of 10 values each time.
Select * from mara
Where matnr in ( ...)
Db2 will be able to perform this sql statement cheaply all 50 times, using one of sap standard indexes that contain the matnr column. But in actuality, if you consider the wider picture (all 50 executions of the statement), you will see that some of the data pages, especially the root and middle-tire index pages have been re-read each execution.
Even though db2 has mechanisms like buffer pools and sequential detection to try to minimize the i/o cost of such cases, those mechanisms can only minimize the actual i/o operations , not the cpu cost of re-reading them once they are in memory. Had you coded the join, db2 would have known that you actually need 500 rows from mara, it would have been able to use other access methods, and potentially consume less getpages i/o and cpu.
In other words , when you use the "for all entries " clause instead of coding a join , you are depriving the database of important information needed to select the best access path for your application. Moreover, you are depriving your DBA of the same vital information. When the DBA monitors & tunes the system, he (or she) is less likely to recognize this kind of resource waste. The DBA will see a simple statement that uses an index , he is less likely to realize that this statement is executed in a loop unnecessarily.
Beore using the "for all entries" clause and to evaluate the use of database views as a means to:
a. simplify sql
b. simplify abap code
c. get around open sql limitations.
check the links
http://www.thespot4sap.com/articles/SAPABAPPerformanceTuning_ForAllEntries.asp
The specified item was not found.
Regards,
Nagaraj -
what does apple plan to do for the people with 2nd gen ipod touch who want to have facebook and other apps now only compatible with ios 5?
poobs wrote:
what does apple plan to do for the people with 2nd gen ipod touch who want to have facebook and other apps now only compatible with ios 5?
Nothing. The 2nd Gen Touch is OBSOLETE and is WAY past its support life. If you want to run the newer apps you have to buy a newer iPod. -
For all entries with inner join
Hi All,
I found some unusual thing.
i have written INNERJOIN along with FOR ALL ENTRIES and also INNERJOIN in loop..endloop. I have tested both programs with around 1000 records, i found that INNERJOIN with FOR ALL ENTRIES is taking more time compared to the other one. As we know FOR ALL ENTRIES with SIMPLE SELECT takes less time compared to select in loop..endloop. Anybody tell me is there any specific reason for this
thanks in advance
rajavardhana reddyHave a look at this weblog by Dharmaveer Singh:
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2986 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
Sudha -
Picture / Video capturing problem with Nokia 5233
Hi All,
I am facing a problem when I capture a picture/video with my new Nokia 5233 phone I bought yesterday.
1. When I try to capture a video, nothing is visible on the phone screen. I click on Record button and the shooting starts and then I click on it again and it stops. But I when it tries save the video it gives an error "Unexpected error occurred. Please restart your phone".
2. I reboot the phone. But I face the same problem. I face the same problem while capturing pictures.
I have tried following as a measure to solve the problem but no success till now:
1. Reboot the phone: tried it more than 20 times. Does not work
2. Soft Restart: Removed the battery for 1 minute and powered the phone back. Does not work
3. Restore Factory Settings: Restored the phone to factory settings. Does not work.
4. I checked my firmware version. Its 12.1.089, RM-625. I think no firmware upgrade is available at present
Please advise what steps should I follow to cure the problem.
Please also let me know in case you are facing a similar problem with your device.
Thanks a lot in advance.
Solved!
Go to Solution.Went to Nokia care. They took 10 days... but could not correct the problem...
Then again left it there for 7-8 days... finally got my phone replaced... -
Problem with Video Capture, and question towards solution
Yesterday I worked on a commercial for which we captured 9 clips (roughly 10 seconds or shorter in length). The clips all had text/titles superimposed on them by an outside machine and looked good in the monitors when they were exported and captured into FCP (ie: none of the text was chopped off).
I edited the commercial and then was exporting it out, only to discover that the text on the bottom of the clips was getting chopped off.
My first question is this: is there some setting in the capture process that could have done this? something that might have gotten tweaked accidently, or corrupted in some manner? Didn't have this problem with footage captured the previous day. And since it looked good before it was put into FCP, thinking it had to be a problem with FCP.
Also, in trying to tweak the footage in FCP, I came across a 'there must be an easier way to do it' question. Is there a way to alter parameters on multiple clips (such as raising them, like I had to)? I tried selecting all and double clicking, hoping that the changes I made would affect them all, but it only affected the one I directly clicked. I'm sure there's something simple (and obvious) that I'm overlooking...
thanks!For how and why this could have happened, would you mind sharing your capture and sequence settings?
As far as applying parameters to multiple clips, I think you can make use of the Paste Attributes function in FCP...
Alter one of your problematic clips
Select that clip in the Timeline, then press Command-C (or control-click and choose Copy from the contextual menu)
Select the remainder of your problematic clips
With your clips selected press Option-V (or control-click on one of them and select Paste Attributes from the contextual menu) to bring up the Paste Attributes dialog
Select Basic Motion - under the Video options, on your left-hand side - then click OK
(Basic Motion because, if I understand your solution correctly, you altered the Center property - either in the Motion tab of the Viewer or manually in the Canvas - of your clips. You nudged them all up a bit, right? If you did, then that would fall under the Basic Motion attribute.)
All your selected clips should be nudged up appropriately.
But, again, I'm making a bit of leap since I'm not entirely sure what caused your issue in the first place. -
Problem with video capture with Blackmagic Intensity Pro card
I have just installed a blackmagic Intensity Pro card to download analogue VCR tapes to DVD. I have set all the input parameters to the Blackmagic card in both Premiere and the input routine for the card. I am using the breakout cable for NTSC input with the green Y input for the video and the L & R audio inputs. When I try to capture I get snow in the premiere capture window, but it does record the L & R audio. When I stop the tape deck I momentarily get the blue screen with STOP showing and then back to snow. I am hoping it is just a setting somewhere but where????
The computer is running Vista 32 home premium with 3G ram
Comments very welcomeIs there a BlackMagic setting required to tell the driver to see the green as composite rather than component?
-
We expect "Captfoss" to reply soon..
Code:-
import java.awt.*;
import java.net.*;
import javax.media.*;
import java.awt.event.*;
import javax.swing.*;
import javax.media.format.*;
import javax.media.protocol.*;
public class JMF2 extends JFrame implements ControllerListener,ActionListener
Processor p=null;
DataSink sink;
MenuBar mb;
MenuItem start,stop;
Menu file;
ProcessorModel model;
Format formats;
DataSource source;
JMF2()
setVisible(true);
setSize(800,600);
setLayout(new BorderLayout());
mb=new MenuBar();
file=new Menu("File");
start=new MenuItem("Start");
start.setEnabled(false);
stop=new MenuItem("Stop");
file.add(start);file.add(stop);
mb.add(file);
setMenuBar(mb);
start.addActionListener(this);
stop.addActionListener(this);
addWindowListener(new WindowAdapter()
public void windowClosing(WindowEvent we)
System.exit(0);
try
formats=new VideoFormat(VideoFormat.CINEPAK);
model = new ProcessorModel(new Format[]{formats}, new FileTypeDescriptor(FileTypeDescriptor.QUICKTIME));
p=Manager.createRealizedProcessor(model);
source=p.getDataOutput();
sink = Manager.createDataSink(source, new MediaLocator("file:///c:/New.mov"));
p.addControllerListener(this);
p.realize();
catch (Exception e)
System.err.println("Got exception "+e);
public void actionPerformed(ActionEvent ae)
try
if(ae.getActionCommand().equals("Start"))
p.start();
sink.open();
sink.start();
System.out.println("start");
else
sink.stop();
sink.close();
p.stop();
System.out.println("stop");
catch(Exception e)
System.out.println("Some problem "+e);
public synchronized void controllerUpdate(ControllerEvent ce)
try
if (ce instanceof RealizeCompleteEvent)
Component comp;
System.out.println("Realized");
start.setEnabled(true);
if ((comp = p.getVisualComponent()) != null)
add (BorderLayout.CENTER, comp);
else
System.out.println("No vis com");
if ((comp = p.getControlPanelComponent()) != null)
add (BorderLayout.SOUTH, comp);
validate();
System.out.println("Updated");
catch(Exception e)
System.out.println("Exception rasied "+e);
public static void main(String s[])
new JMF2();
1..This is the code which we used for capturing and saving video in the disk..But we got a mov file created zero size..what is the reason for that..Can any one suggest a better way for this..
2..Is Creative Webcam II supported by JMF 2.1 ..
3..Suggest any other format for audio and video capturing and saving..
Thanks in advance..Thanks T.B.M..
It worked..My webcam details are as follows:
{color:#ff6600}Name = vfw:Microsoft WDM Image Capture (Win32):0
Locator = vfw://0
{color}
It suports the following formats..
{color:#ff6600}
0. javax.media.format.RGBFormat
RGB, 320x240, Length=230400, 24-bit, Masks=3:2:1, PixelStride=3, LineStride=960, Flipped
1. javax.media.format.RGBFormat
RGB, 160x120, Length=57600, 24-bit, Masks=3:2:1, PixelStride=3, LineStride=480, Flipped
2. javax.media.format.RGBFormat
RGB, 176x144, Length=76032, 24-bit, Masks=3:2:1, PixelStride=3, LineStride=528, Flipped
3. javax.media.format.RGBFormat
RGB, 352x288, Length=304128, 24-bit, Masks=3:2:1, PixelStride=3, LineStride=1056, Flipped
4. javax.media.format.RGBFormat
RGB, 640x480, Length=921600, 24-bit, Masks=3:2:1, PixelStride=3, LineStride=1920, Flipped
{color}
So made the following changes in my code..
dl=CaptureDeviceManager.getDeviceList(new VideoFormat(VideoFormat.{color:#ff6600}RGB{color}));
ml=((CaptureDeviceInfo)dl.firstElement()).getLocator();
formats=new VideoFormat(VideoFormat.RGB);
model = new ProcessorModel(ml,new Format[]{formats}, new FileTypeDescriptor(FileTypeDescriptor.{color:#ff6600}MSVIDEO{color}));
p=Manager.createRealizedProcessor(model);
source=p.getDataOutput();
sink = Manager.createDataSink(source, new MediaLocator("file:///c:/Adiyae.{color:#ff6600}avi{color}"));
p.addControllerListener(this);
p.realize();
Now the file is getting created with its size depending upon how long i capture..This is fine..But when i try to play the file using a media player it doesnt open.. when i tried opening it with JMStudio i get the following message..
{color:#ff6600}Controller Error:
Failed to realize:Failed to parse the input media..
{color}Also can you tell me how to choose the FileTypeDescriptors for a particular video format.. The only FileTypeDescriptor that works with mine is the MSVIDEO..
Thanks in advance..
Edited by: s.baalajee on Dec 8, 2008 5:40 AM -
Ok i just bought a MSI GeForce4 Ti4200-VTD8X, Wich got Tv_Out + Video_in
With the card i got a Tv_out/Video_in connecter to plug in the card, now the problem seems to come, i plug my S-video cable behind my Tv_out/Video_in connecter (wich of course is connectet to my graphics adapter) and the other end of the S-video cable into a SCART Adapter wich i plug into the scart output on my VCR, but when i start any video capture software, it just says no device connectet plz HELP me! :(Never mind, got it working all by myself now
-
Auto Cropping with video images problem (CS6)
I'm working with 6 video clips to create a compilation. All are mp4s. When 2of them are dropped (or dragged) form the source panel into the timeline, for some reason the video on them is zoomed in, or cropped, to like 30% of the original. When I view the clips in the source panel (by double clicking on the file in "source" below, everything is fine - it's 100% of the image there. But something is happening when the file gets dropped into the timeline on the right. Is there some zoom or crop feature somewhere that's getting triggered that I need to turn off? Thanks for any help, Andrew
I may have figured out how this happens but not how to fix.
When I imported the two “problem” clips, they look normal (non-cropped) if I choose “Change Existing Settings.” They become cropped, however, if I choose “Keep Sequence Settlings.”
The problem is I have problems with the other 4 clips if I also choose “Change Sequence Settings.” These 4 are only ok if I choose “Keep Sequence Settings.” So the reverse problem of the other 2 clips.
Is there a way to custom choose either “Keep Sequence Settings” or “Change Existing Settings” for each clip? It seems that once you make a choice for either setting on the first clip (i.e. “Keep Sequence Settings”), all the clips you import after that automatically default to that setting choice (“Keep Sequence Settings”).
Maybe you are looking for
-
Jump to Function not working for header items
Hi Experts, I have a query using jump to function to access R3 tranaction, It has issue jump to transaction MB51 Item Data:Material, plant, ... header data: posting date,... All settings in RSBBS are correct, but the posting date is not passed onto R
-
How to use the submit button without an email address
We are changing the way one of our forms is used. Previously the "submit by email" button opened up an email with a specific TO: address. Now we like to have the user put in the address but still have the form attached to the email when it is opene
-
Can someone help with why the flv won't play on testing server.
-
Can we produce a newsletter in one CS4 application and output it to both print and the web?
Can we produce a newsletter in one CS4 application and output it to both print and the web? If so what do you suggest that we use? Message was edited by: [email protected]
-
Uploading data through scat using without files
if we are uploading data for J1IS using BDC, Values are not getting updated. so we are trying to upoad it using SCAT. what are the steps to f