For All The ATI Radeon9600 Pro users only.

If you are an owner of a built by ATI Radeon 9600pro card then you should take some interest in this post.
Some of you may know of the modifications you can do to the Radeon 9500 non-pro and turning it into a 9700 Pro. By installing the bios of a 9700 into the bios of a 9500 you will fool the computer into making it run as a 9700 pro. The idea was that the board layout and GPU core of the 9500 and 9700 were identical to each other that the only deference was the bios. Same micron cores, but only the 9500 was underclocked via the bios. The quality control team at ATI would test the GPU cores for 9700 performance standards and the ones that fell slightly short were used on some OEM 9500 boards. So doing the bios mod one would achieve, in most cases, 9700 results. A voltage mod would remedy any GPU that couldn't handle the load.
ATI caught wind of this and soon introduced the 9600 and 9800 Radeon series. How ever, you can still modify the 9600 to a lesser degree. On the Built By ATI 9600 pro cards, you will notice a template for a FDD power connector. You can attach an FDD connector to it and will achieve higher overclocking on this card. The reason is simple, more power to the ram and GPU, the more MHz it can handle. The default speeds of the 9600 pro are 400GPU/300RAM. Most boards are reaching 500/345 with out the FDD mod. With the FDD mod you can expect a minimum of 10%, but most results are higher. The 9600 Pro uses a smaller micron core then anything out today, so there is a lot of headroom for overclocking with heat being less of an issue. If you are brave enough to try it, I'm sure you will be impressed with your efforts. I will post my benchtests after I deal with my MOBO issues.
P.S. The FDD mod will only work on the revision 1 Built By ATI Radeon 9600 Pro. These are better also because they use 2.8ns ram as compared to 3.3ns on rev. 2's.

I'm going crazy!!!
I'm not sure if the problem is the graphics card which is the one mentioned.
Because my computer's performance is slower than ever:
* When I restart it takes quite a while to open any aplication.
* Video freezes during playback (playback doesn't stop, but the image does)
* Rendering with Final Cut, Photoshop and Maya is way slower than my old Pc's.
Even when all system software is up to date nothing fixes this problems.
I tried a couple of times reinstalling the hole system but those problems remain intact.
Does anybody knows if this could be fixed with an specific codec or with a different graphic card????
Has some of this issues happened to you????

Similar Messages

Recordcount for all the tables in my user

How I will get recordcount for all the tables in my user
with a single query??
Plz help.
Thanx in advance.

Not possible. As there can be any number of tables with any names, this requires dynamic SQL.
SQL given to the Oracle SQL Engine cannot be dynamic ito scope and references - it must be static. For example, one cannot do this:
SELECT count(*) FROM :table
For the SQL Engine to parse the SQL, determine if it is valid, determine the scope and security, determine an execution plan, it needs to know the actual object names. Objects like tables and columns and functions cannot be variable.
You will therefore need to write a user function (in PL/SQL) that dynamically creates a [SELECT COUNT] SQL for a table, execute that SQL and return the row count - and then use SQL to iterate through USER_TABLES for example and sum the results of this function.
Note that object tables are not listed in USER_TABLES - thus a more comprehensive list of all table objects in your schema can be found in USER_OBJECTS.

Measuring and sectioning tools in the 3D PDF, are available for all versions of acrobat? Or only for XI PRO or XI?

I'm looking for install the Acrobat XI PRO version to create 3D PDF, but I want to know if other people without this version could open the PDF and mesure the piece or section it with the tools or if this functions are only available in this version.
Thank you!

The tools are available in all versions of Acrobat and Adobe Reader on the desktop.

Make all the forms at a user level or responsibility level to be read only

Hi,
Please suggest me to make all the forms at a user level or responsibility level to be read only. So that when a particular user logs in, he gets all the form in read only mode or at a particular responsibility all the forms are read only so that we can attach this responsibility to the user for the same purpose.
Any ideas will be highly appreciated.

check this blog,
http://www.oracleappshub.com/11i/oracleapps-responsibility-vs-sap-functions/
Re: How to change OM responsibility as read-only in oracle applications 11i
read only responsibility-user

Query regarding the fields details in particular form for all the users in

Dear All,
I have one query regarding the fields details in particular form for all the users in company.
Let take an exapmle if i had created Purchase Order having fields in content tab as 1.Item No. 2.Quantity 3.Unit Proce 4.Total 5. Location.
While Login in User manager i set these fields only for Purchase order , but when i login from other user and open the similar purchase order the defaults fields are also seen including above 4 fieds .
Now my question is how to set the User choice fiels for the particular form that are common to all users.
Means whenever i login in any user and opens the same document the same fields should be seen....Thanksssss.........

You have to login with each and every user and do the Form Settings of every forms, so that all the forms look same for all the users.
This is a manual job and you have do do it with every user login.
Alternately, you can try out this link that explains
[How to Copy One Screen Layout to Another User|http://www.sbonotes.com/2008/03/how-to-copy-one-screen-layout-to.html]

Provide Feedback for the DVD Studio Pro User Manual and Onscreen Help Here

The Apple documentation team for professional video applications would like to know what you think about the DVD Studio Pro 4 Help documentation (available in the Help menu):
• How often do you use the DVD Studio Pro Help documentation? Under what circumstances do you use it most?
• How do you find what you're looking for in DVD Studio Pro Help? For example: table of contents, index, skimming, PDF links, PDF search?
• What do you like most about DVD Studio Pro Help?
• What is missing?
• Are there any particular examples of other manuals or documentation that you consider to be good models for future editions of the DVD Studio Pro User Manual and onscreen help?
• By what method do you usually learn a new application? For example: provided tutorials and manuals, third-party tutorials or books, training classes?
• What do you think is the most difficult feature/concept to grasp in DVD Studio Pro?
• What's the most frustrating experience you've had with the DVD Studio Pro Help documentation?
• Do you prefer electronic or print documentation?
• Are there any other delivery methods or media you think we should explore?
• What size computer display do you typically use to view the onscreen help? For example: 15-inch, 17-inch, 20-inch, 23-inch, or 30-inch?
• What resolution is the computer display set to when you view onscreen help? For example: 1024 x 768, 1280 x 854, or 1920 x 1200 pixels?
• Do you use multiple computer displays?

• How often do you use the DVD Studio Pro Help
documentation? Under what circumstances do you use it
most?
I'm working with DVSP for 4 months, so everytime I don't know how to do something I use the documentation. As the times passes I almost don't need it so often.
• How do you find what you're looking for in DVD
Studio Pro Help? For example: table of contents,
index, skimming, PDF links, PDF search?
PDF Search, but I think is not the best way to search because it shows too much useless results.
• What do you like most about DVD Studio Pro Help?
It is powerful and easy to use.
• What is missing?
A way of editing the DVD Project Source Code. Let me explain: in some big projects I just need to change the Jump from "button_1" to "button_2", and to do that I need to find the button under my menus and choose it from a list. If I can just type "2" instead of "1" it will be faster and error-free.
Advancing in this idea, if I can open the entire link list as a Source Code in TextEdit, I can see all the buttons and link all of them without seeking for each on menus.
Today the Connections Tab helps a lot, but I still need to find the button un the menus. With 5 or 4 menus is easy, but sometimes I have 50...
• Are there any particular examples of other manuals
or documentation that you consider to be good models
for future editions of the DVD Studio Pro User Manual
and onscreen help?
The OSX help is great!
• By what method do you usually learn a new
application? For example: provided tutorials and
manuals, third-party tutorials or books, training
classes?
Manuals, third-party tutorials and discussions foruns.
• What do you think is the most difficult
feature/concept to grasp in DVD Studio Pro?
• What's the most frustrating experience you've had
with the DVD Studio Pro Help documentation?
Using scripts. It could be better with a lot of examples. "To do that, try this one".
• Do you prefer electronic or print documentation?
In electronic is easy to find things.
• Are there any other delivery methods or media you
think we should explore?
• What size computer display do you typically use to
view the onscreen help? For example: 15-inch,
17-inch, 20-inch, 23-inch, or 30-inch?
I use AppleCinema 20
• What resolution is the computer display set to when
you view onscreen help? For example: 1024 x 768, 1280
x 854, or 1920 x 1200 pixels?
1650x1050
• Do you use multiple computer displays?
No.

Publishing a list with specifics views anf filters for all the users to see it.

Hi i was working on the item level permissions of a list which are accessed by all users.
I have applied the item level permissions for specific users having specific records to work with.
Now, there are situations when we need to show all the users all the data but in read only mode.
How do i work on the report so that the user can actually only see the data.
The Admin will pick the list with a specific view and apply filters and then expose it for other end users to view.
How do i achive that?

Hello,
How did you set item level permission? I mean, list "advanced settings" OR manually edit the items permission by breaking the permission.
If you have broken the permission and user doesn't have permission on items then there is no way to show item to users. You must provide at least read access to view the item.
In you case, you can give contributor right to everyone on all items (by inherit parent permission) then go to list settings page-->advanced settings-->then set item level permission as shown in pic:
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

How to set up same timezone in BI Publisher for all the USERS?

Hi Experts,
My OBIEE version is 11.1.1.6.6 and any user can go into the My Account and then preferences and set the timezone.
But as an admin, i see they are too many users and wanted to setup common timezone for all of them.
How do i setup common timezone in BI Publisher for all the users?
Thanks
Ashish

Check
Time Zone Specification from http://docs.oracle.com/cd/E12844_01/doc/bip.1013/e12187/T421739T481157.htm#4535403
just in case https://blogs.oracle.com/xmlpublisher/entry/how_to_keep_your_dates_from_go

Creating Planned orders and Requisitions for a particular MRP controller and for all the others only Requisition is to be created.

Hi Experts,
Currently we run Program 'RMMRP000' as a batch job to create Planned orders and requisitions.
The client wants that Planned orders and Requisitions should be created for a particular MRP controller and for all the others only Requisition is to be created.
I implemented Exit 'EXIT_SAPMM61X_001' in the following manner by passing MRP controller to user_key.
IF mt61d-dispo <> user_key.
no_planning = 'X'.
ENDIF.
But as you can see that this will not meet my client requirement.
If any of you has worked on similar requirement / if any one knows that this is achievable or not,
please share your inputs.

Moved from SAP ERP Sales and Distribution (SAP SD) to ABAP Development
G. Lakshmipathi

HT3669 I only have a HP printer and why I need to install a file for all the HP printers drivers 590MB??? if normally the size of my file should be 5MB. some one could me help to avoid installation of 590MB for my new mountain lion software???

Hi guys..!!
I would like to know if someone could help on this:
I just have a HP printer (HP Designjet 100) and for some reason I need to install a file for all the HP printers drivers in total 590MB to be able to use my printer in my mountain lion???
If normally the size of my files in the for previous software was more or less 5MB why now i need to install 590?
Some one could help me how to avoid installation of 590MB for my new mountain lion software???
Thanks

If you go to http://support.apple.com/downloads and locate the HP Printer Drivers installer, you will find that it is 473.4 MB (for version 2.11). If you install this, it will install the full set of drivers for every model of HP printer that is supported by the drivers distributed through Apple. The disk space occupied once installed will probably be larger than the download, since the downloaded file is compressed.
On the other hand, if you have an HP printer connected and you use Software Update (or the Update tab in App Store), that should offer you a much smaller set of HP drivers, which are only applicable to your printer (and possibly a few similar ones). These updates are typically only tens of megabytes rather than hundreds of megabytes.
If Software Update doesn't offer you any HP drivers then it either thinks you have the latest drivers installed already, or the printer model is not supported by the drivers available from Apple.
This article lists all of the printer models for which Apple distributes the driver:
http://support.apple.com/kb/HT3669

I pay for upgrading ifindyou and it doesn't work!!!! it clearly says that it tracks only your mobile in the lite version, after you ask the upgrade for all the mobile... can we call this a fraud????

i pay for upgrading ifindyou and it doesn't work!!!! it clearly says that it tracks only your mobile in the lite version, after you ask the upgrade for all the mobile... can we call this a fraud????

Hi,
"A day after the name change became official my built in skydrive app stopped working"
Did you point that SkyDrive changed to OneDrive?
Did you move your OneDrive to another location or change its name?
Please login OneDrive with web-based to check if you could access it successfully.
Please refer to the following article to try the troubleshooter and check the service status:
SkyDrive: FAQ
http://windows.microsoft.com/en-in/windows-8/skydrive-app-faq
Karen Hu
TechNet Community Support

Resolve installed Flash player not excuted for all the Vista users on my PC?

I have a Windows Vista 32-bits system.
I have created 2 admin and 2 standard users.
Internet Explorer 9 (IE9) 32 bit is installed but also Chrome and Firfox are used.
For 1 admin user Flash works fine when accessing a site in IE9 that requires Flash.
For the other users, including the admin user, IE9 must be run "as adminstrator" by specifically choosing that option.
If not run "as administrator" IE9 states that Flash needs to be installed. That either leeds to Flash player not being installed (error is that it is already installed) or that after a succesful installation the problem simply occurs again (and again and again ...)
I want the standard users on the pc to be able to navigate to trusted sites without running IE9 in "as adminstrator" mode.
What do I need to do?
Can I set Adobe Flash player to be available for all the users for Vista and IE9?
Do I need to alter registry settings manually?
If yes - how and which?
Thanks in advance.

Chris,
Thanks for the reply but unfortunately it does not resolve the problem.
Other users (including the other system administrator) still need to run IE as administrator.
When in my sysadmin account the shortcuts for other users to a URL requiring Flash and using IE9 execute fine GRRRRRRR.
This is very frustrating.
On my pc Chrome aand Modzilla have no problems.
The childrens protective software I have however is based on IE.
Do you have any more suggestions?
My alternative is to downgrade IE9 to IE8 or 7 but that is also not an easy exercise ...
Thanks in advance for any input.

All the users can buy for all the purchasing groups?

Hello,
I have created the organizational structure as follows:
(root level 1) Company O 50000758
    (root level 2) Plant    O 50000759
    (root level 2) Purchasing organization   O 50000760
          (root level 3) Purchasing group1        O 50000761
          (root level 3) Purchasing group2        O 50000762
          (root level 3) Purchasing group3        O 50000763
The Plant and the Purchasing organization bellows to the Company
The Purchasing group bellows to the Purchasing organization
(level A) Position DATA-ENTRY1
(level B) Central person (employee) DATA-ENTRY1
(level C) User DATA-ENTRY1
(level A) Position DATA-ENTRY2
(level B) Central person (employee) DATA-ENTRY2
(level C) User DATA-ENTRY2
All the users can buy for all the purchasing groups
At what level I have to assign the Positions (levelA)?
Cheers,
Marta

Hello Subram,
Thank you very much for your help.
To shop on behalf, I have to fill the attribute REQUESTER at (level A) Position level.
What I have to put in that attribute? The (root level 2) Purchasing organization O 50000760?
I have a error when I put 50000760? ...."Object type XX not defined"
Do you know how to help me?
Cheers,
Marta

I have iphone 4 with ios 7.0.3. but with ios 7.0.3 my phone is working very slow. please do something for all the iphone 4 user.

i have iphone 4 with ios 7.0.3. but with ios 7.0.3 my phone is working very slow. please do something for all the iphone 4 user.

Hi Tyler199869,
If you are having issues making or receiving calls after updating your iPhone, you may find the following article helpful:
iPhone: Troubleshooting issues making or receiving calls
https://support.apple.com/kb/TS3406
Regards,
- Brenden

My MacBook Pro has all the current updates, however is only open in version 10.5.8

My MacBook Pro has all the current updates, however is only open in version 10.5.8 I've tried disk permission repair. I tried rebooting in leopard (which I have 2 cd) and both eject within 10 seconds. What do I do?

Thank you. I knew I had to purchase Lion, I had no idea had to purchase Snow Leopard. Boy do I feel stupid :/
Much appreciated

For All The ATI Radeon9600 Pro users only.

Similar Messages

Maybe you are looking for