For all those with no sound with ITunes 7.0

I'm just going to post what happened to me. After installing iTunes 7, I could not play any music...the progress bar would sit there, and eventually I would hear a weird sound coming from the speakers.
I opened up the QuickTime control panel, and went to the Audio tab. I set the rate to 192 Khz (from 44.1) and left Size=16. After applying, I could play all of my music.
Don't ask me why. I just hope it works for others.

I have a WinXP PC and a Linksys G class router. I am on Comcast broadband cable. Both ATV and PC are on wireless link. And I have tried a borrowed Apple Airport router (G class). That didn't help resolve this problem so far. I don't think it is a router issue as you will see that many folks on this forum have the same problem with a wide mix of environments. Many of them are on pure Apple components and so one cannot blame Microsoft and non-Apple devices.
Having said this, I hope the new router resolves your issues. In my case, the only option left is to keep calling Apple Care.

Similar Messages

For all those with D-Link routers and problems with iTunes dropping AppleTV

My setup: Custom built WinXP PC with iTunes 7.6.2. Apple TV w/Take 2. D-link DI-624 wireless N router, wired to the PC, wireless to the aTV.
I have an intersting phenomenon occuring with my Apple TV. I can sync the aTV to my PC and it works fine, but the first time we receive a phone call on our VOIP phone, the router drops the ATV connection to the PC. aTV still has internet connectivity, but iTunes on the PC cannot see the aTV, and I cannot sync.
A search yielded gobs of folks with D-link routers and iTunes/AppleTV connection issues. I just won an Airport Extreme router off ebay...as soon as I have a chance to test it out I will post back in this thread as to the results.
I know folks don't like the solution to be "spend more money", but I think it would be worth it to a lot of people if they knew a different router would solve their issues (rather than continuing to guess or throw money at the problem randomly).

I have a WinXP PC and a Linksys G class router. I am on Comcast broadband cable. Both ATV and PC are on wireless link. And I have tried a borrowed Apple Airport router (G class). That didn't help resolve this problem so far. I don't think it is a router issue as you will see that many folks on this forum have the same problem with a wide mix of environments. Many of them are on pure Apple components and so one cannot blame Microsoft and non-Apple devices.
Having said this, I hope the new router resolves your issues. In my case, the only option left is to keep calling Apple Care.

For all those with "BLANK SCREEN ISSUES" with MacBook Pro's....

...I suggest you direct all the issues you're having to Apple through the feedback form here:
http://www.apple.com/feedback/macbookpro.html
I for one have rang tech support twice now, had a go and the only response I got back was to go to that link, fill the form in and wait for response.
State the problems you're having and post this link as reference:
http://discussions.apple.com/thread.jspa?threadID=1478474
Hopefully then Apple with acknowledge each of us.
(PS. Apple people...DO NOT delete this post for being "off topic" because it most definately IS ON TOPIC!. Im trying to save people from calling tech support at their expense only to be told to fill in the feedback form.)

veek wrote:
MrWeatherbee wrote:
stonecrest wrote:9.01 != 9.0-1
Who are you directing that to?
To you if I'm not mistaken...you upgraded to 9.0-1 via pacman,
but the fix was in 9.01 not 9.0-1.
If you read my post, I was responding to Vex who said 9.0[-1] fixed his issue. Knowing that 9.0[-1] != 9. 01 (and that the fix was in 9.01) , I told him it was weird that 9.0-1 fixed his problem (which is more polite than saying, "Bullsh*t!"), and I confirmed the weirdness by pointing out that the 9.0-1 upgrade I had performed earlier that morning did nothing for me (nor did I expect it to because the fix was in 9.01). Finally, I confirmed that building and installing 9.01 did the trick (as it was supposed to).
I don't really think anybody was confused about 9.0-1 != 9.01. That's why I asked who Stonecrest was talking to. No big deal.

For all those out there with Iphone5 WIFI issues,Please READ THIS

I pre-ordered my iphone 5 (Black) got that last week. Quickly backed up my Iphone 4 and Restored my iphone 5.The first thing i checked to see is connecting to my WIFI network at home. And i kept getting a message "UNABLE TO CONNECT TO THE NETWORK". I had the iphone 4 aside and i can see iphone 4 is connected just fine. So are my laptop, Ipad and other devices.
So what is different in Iphone5?
After couple of days of head banging, and phone calls with apple support. I finally gave up and went to a apple store , they said, They have not heard any WIFI issues and my case was the first , However to keep me happy they said they will replace my device, But if have the same issue ,they will NOT be able to replace it again. And they even showed me the new iphoen connects to their "Non-secured" apple WIFI network.
So i take the new phone home, and the first thing i try is connecting to WIFI.And i still get "Unable to connect to the wifi network ".And i still can see Iphone 4 working fine and connecting to the same network just fine. With the second iphone5 also not working, I realized it is not hardware, but something surely changed with WIFI in iphone 5. I have a NETGEAR router with its latest firmware installed(2.0.26). I then downgraded my firmware to 2.0.21, then gave a shot.
BINGO..Iphone 5 works fine connects to wifi.and so is my iphone4 too.
So for all those users out there, the fact is something changed in iphone 5 WIFI algorithm. And if anyone really disagrees with me on this, I am going to post a video to demonstrate on YOUTUBE. I believe it is completely UNFAIR for apple to now ask you Upgrade/change your router or its firmware. And it is not fair for router companies to Fix anything to make their firmware compatible with iphone5.
So iphone 5 Users, Please lets us all push for a fix on this issue. WE WANT FIX.

I can't tell you how frustrated/disappointed I was when this exact situation happened to me. I upgraded my wife's iPhone 4 to an iPhone 5 just to find out that it wouldn't connect to my home wifi but would connect everywhere else. Guess what...
I found a fix!!
On you iPhone go to Settings, General, About, scroll to "WiFi Address". Now stay there.
Log-in to your modem thru your web browser via IP Address. (Keep in mind, I use a 2Wire modem, yours may be different) Clicked "Wireless" for wireless settings, scrolled down to "MAC Filtering" and clicked "Edit Allowed/Blocked Device List". At the bottom, there's a field to which you can manually enter a MAC address to you allow or block. If you're using a different modem with different menus/options, just browse around til you find a similar option of manually adding MAC addresses for access or blocking.
MAC Address = Wifi Address. See where i'm going with this?
Type the WiFi Address from you iPhone in the MAC address field, click "Add to List". If MAC filtering is enabled, it'll be added to the BLOCK list, simply click on the address, and click the double arrow pointing towards the ALLOW list so it'll transfer lists to where you want it, then click save.
Now go back to your iPhone and attempt to re-connect to your wifi network as you normally would & voila!
This worked for me, i hope it works for you as well.

For All Entries with two tables

Hi All,
         Can we use FOR ALL ENTRIES with two tables. for example
SELECT * FROM MKPF INTO TABLE T_MKPF
         WHERE BUDAT IN S_BUDAT.
SELECT * FROM MARA INTO TABLE T_MARA
         WHERE MTART IN S_MTART AND
                        MAKTL IN S_MAKTL.
SELECT * FROM MSEG INTO TABLE T_MSEG
       FOR ALL ENTRIES IN "T_MKPF AND T_MARA"
              WHERE MBLNR EQ T_MKPF-MBLNR AND
                             MATNR EQ T_MARA-MATNR.
can we do it like this or any other way to do this plz tell. I waitting for your responce.
Thanks
Jitendra

Hi,
u cannot do like this....chek some documentation on it..
1. duplicate rows are automatically removed
2. if the itab used in the clause is empty , all the rows in the source table will be selected .
3. performance degradation when using the clause on big tables.
Say for example you have the following abap code:
Select * from mara
For all entries in itab
Where matnr = itab-matnr.
If the actual source of the material list (represented here by itab) is actually another database table, like:
select matnr from mseg
into corresponding fields of table itab
where .
Then you could have used one sql statement that joins both tables.
Select t1.*
From mara t1, mseg t2
Where t1.matnr = t2.matnr
And T2..
So what are the drawbacks of using the "for all entires" instead of a join ?
At run time , in order to fulfill the "for all entries " request, the abap engine will generate several sql statements (for detailed information on this refer to note 48230). Regardless of which method the engine uses (union all, "or" or "in" predicates) If the itab is bigger then a few records, the abap engine will break the itab into parts, and rerun an sql statement several times in a loop. This rerun of the same sql statement , each time with different host values, is a source of resource waste because it may lead to re-reading of data pages.
returing to the above example , lets say that our itab contains 500 records and that the abap engine will be forced to run the following sql statement 50 times with a list of 10 values each time.
Select * from mara
Where matnr in ( ...)
Db2 will be able to perform this sql statement cheaply all 50 times, using one of sap standard indexes that contain the matnr column. But in actuality, if you consider the wider picture (all 50 executions of the statement), you will see that some of the data pages, especially the root and middle-tire index pages have been re-read each execution.
Even though db2 has mechanisms like buffer pools and sequential detection to try to minimize the i/o cost of such cases, those mechanisms can only minimize the actual i/o operations , not the cpu cost of re-reading them once they are in memory. Had you coded the join, db2 would have known that you actually need 500 rows from mara, it would have been able to use other access methods, and potentially consume less getpages i/o and cpu.
In other words , when you use the "for all entries " clause instead of coding a join , you are depriving the database of important information needed to select the best access path for your application. Moreover, you are depriving your DBA of the same vital information. When the DBA monitors & tunes the system, he (or she) is less likely to recognize this kind of resource waste. The DBA will see a simple statement that uses an index , he is less likely to realize that this statement is executed in a loop unnecessarily.
Beore using the "for all entries" clause and to evaluate the use of database views as a means to:
a. simplify sql
b. simplify abap code
c. get around open sql limitations.
check the links
http://www.thespot4sap.com/articles/SAPABAPPerformanceTuning_ForAllEntries.asp
The specified item was not found.
Regards,
Nagaraj

IPhoto frustrating error..The volume for "Df23.JPG" cannot be found. It prompts for all photos with this issue rather than offering an option to ignore. I can find the images in spotlight but not in Find Photo. Does anyone have a solution

iPhoto frustrating error..The volume for "Df23.JPG" cannot be found. It prompts for all photos with this issue rather than offering an option to ignore. I can find the images in spotlight but not in Find Photo. Does anyone have a solution?

Unless you have the source files that were on the TC or Windows machine you will have to start over with a new library as follows:
Start over from scratch with new library
Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
1. Move the existing library folder to the desktop.
2. Open the library package like this.
Click to view full size
3. Launch iPhoto and, when asked, select the option to create a new library.
4. Drag the Masters (iPhoto 11) folder from the iPhoto Library on the desktop into the open iPhoto window.
Click to view full size
This will create a new library with the same Events as the original library but will not keep the metadata, albums, books slideshows and other projects. Your original library will remain intact for further attempts at fixes is so desired.
OT

I have a 3GS. The iPod on the phone has made duplicates of some songs. I've tried using the "get info" dialog box to set all the information the same but the dups are still there. Even after erasing all music with iTunes they are still there.

I have a 3GS. The iPod on the phone has made duplicates of some songs. I’ve tried using the “get info” dialog box to set all the information the same but the dups are still there. Even after erasing all music with iTunes, iTunes is empty but they are still on the phone.

Some Users have reported that a Restore as New has Resolved Issues after the Upgrade...
Backup and Set Up as New Device
http://support.apple.com/kb/HT4137

For all entries with inner join

Hi All,
I found some unusual thing.
i have written INNERJOIN along with FOR ALL ENTRIES and also INNERJOIN in loop..endloop. I have tested both programs with around 1000 records, i found that INNERJOIN with FOR ALL ENTRIES is taking more time compared to the other one. As we know FOR ALL ENTRIES with SIMPLE SELECT takes less time compared to select in loop..endloop. Anybody tell me is there any specific reason for this
thanks in advance
rajavardhana reddy

Have a look at this weblog by Dharmaveer Singh:
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2986 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
Sudha

Trigger workflow for all tcodes with set transaction GS01

Hi,
There are nearly 7 tcodes in FI maintained in the set tranasction using GS01 and we desire to trigger worklfow for all those tcodes, even if another one is added in future. What is the process to go about?
Regards

Hi,
Thanks for the concern.
The tcodes are SAP standard tcodes like fb50 and others for document park and post. Now the requirement is that, the set of tcodes maintained in set transaction GS01, say 7 SAP standard tcodes maintained, the workflow should trigger whenever someone parks or posts a document, which must be subsequently approved by a set of approvers and then the actual release and posting(or re-posting) takes place.
How can i achieve this using workflow, precisely to trigger worklfow for al those tcodes, now at a later date the tcodes can be either reduced or added to the set.
Best Regards
Partha Kar

Okay. Question for all those IT wirzards (

Okay. Question for all those IT wirzards (& iTunes) experts out there. Anyone know why a playlist (Purchased) keeps dropping off my playlists in iTunes??l This has happened at least 15-20 times to me in the past couipe of years. Fofrtunately for me, I saved these songs to an external hard drive, so retrieval won't be so painful. Guess I just want to know how to avoid this going forward.

Just that one playlist goes missing and no other content? No idea. But it is clear you ought to have a backup so you can restore the database should it happen again.
tt2

For all those that use the Volume Logic plug-in with iTunes

Volume Logic has updated their website www.volumelogic.com that they are aware of the issue with the plug-in not working with iTunes 7.o for both Mac and Windows versions. They are working on a fix. (thank God! as normal iTunes audio *****!)

There's also a really useful blog article that summarizes how you can tweak the new layout: http://blogs.skype.com/2014/11/13/getting-to-grips-with-the-2014-skype-layout/
NanaTeppler wrote:
I just upgraded to version 6.22.0.107. My chat window for IMs now has blue text on a lighter blue background. Now some of us are old and decrepit and find this difficult to see. Is there a way to change the chat area text back to black on a white background?
Currently there's no option to deactivate the blue chat bubble background, but we've heard the feedback from quite a few users and are looking into how we can improve the readability.
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

For all those having issues with the 11.1.4.62 update

The issues encountered are vast... msvcr80.dll issues.. Apple Mobile Device failed to start... and on and on... Never understand how a simple update can completely screw up everything and make iTunes unusable.
Go into Programs and Features and ANYTHING that says "Apple" with something after it, uninstall it.
Reboot
Download a fresh copy on iTunes
Right click on iTunes64Setup.exe left click on Run as Administrator. Even if you're only use on your computer and it's an Administrator account do it.
Cross your fingers, throw some salt over your shoulder, say a prayer. If the install completes with no error measages you're done.
If you still get the msvcr80.dll error
Google How to use scannow Windows 'Whatever Version you're running'
This will check the integrity of your system files.
If everything checks out you need to replace the missing dll file
Use Google again for Missing msvcr80.dll
I had to put the dll back in Windows/System32/ for iTunes to install properly.

I am running the 32-bit version of Windows 7.
I too, encountered these problems when attempting to update.
I began the update from within iTunes. It got past the download phase, but during the installation phase, for the first time ever, I encoundeted an installation failure. It told me to try again, but if it failed, to download the standalone file and install it manually. Unfortunately, though, the (failed) installation still managed to have gotten far enough along so as to leave my machine in a state that I could no longer launch iTunes.
When I tried to launch, I received the missing MSVCR80.dll--just like others have reported. I tried to install this "missing" file by downloading the Microsoft Visual C++ Redistributable (I forget which one, as there are several flavors, but "SP1" and "MFC" were part of the descriptive name from the Microsoft Download Center). DO NOT, under any circumstances, TRY TO OBTAIN THIS MISSING FILE FROM ONE OF THOSE WEB SITES OFFERING THIS (or other) FILE(s). Most if not all of these sites, are likely malicious in nature.
At-any-rate, while I ran the installation of the vcredist_x86.exe file, I briefly saw some form of positive progress, I never seemed to get a definitive completion (i.e., nothing told me the install completed successfully). Nor did I see any error message. I also tried a .NET Framework 4.0 repair as this suggestion was also offered elsewhere on the Apple iTunes Forum. Unfortunately, neither of those suggestions solved my problems, as I still continued to receive the missing MSVCR80.dll message, and iTunes would not launch.
I then followed the directions found elsewhere in this thread by uninstalling the Apple applications (in the order listed), rebooted (and for good measure) I also ran ccleaner after the system came back up), and tried the install again using the iTunesSetup.exe file (RunAs Administrator option).
During this attempt, now I received a DIFFERENT error message: Specifically, the Apple Mobile Device service could not be started. Attempting to start it manually from the Services panel, wouldn't work, either. I told the install to "Ignore" this error, and even the installation made it to the end and stated the installation was successful, it definitely was not.
The Apple Mobile Device error encountered during installation mentioned ensuring there were sufficient permissions. As the installation was performed using the RunAs option, this should have used Administrator permissions. Still no dice, however. So I completely uninstalled everything again (in the order specified). Rebooted. This time, I also manually removed directories left behind in C:\Program Files\Common Files\Apple directory.
I kept any plugins that existed, but dumped all of the *.resources files I could find. They all had today's date on the file directories, so I knew they'd been "touched" by the various installation efforts--and who knew whether something left behind might be causing issues. I blew these away since it got left behind by the uninstall operation (a major annoyance these applications don't do a better job of cleaning up after themselves when "removed").
Did the same sort of thing in C:\Program Files\iTunes. I also Re-ran ccleaner (again), and rebooted one more time, as there was still some reference in Registry to APSDAEMON.exe, which, now, no longer existed, but was still trying to be started via the entry in HKLM\Software\Microsoft\Windows\CurrentVersion\Run. Found the entry and simply deleted it, which kept me from getting that paticular error at restart.
Last, but not least, I downloaded the FORMER version of iTunes from Filehippo, since they keep all of the previous versions. Apple might do that, too, but I didn't know for sure, nor did I know where to find it, whereas, I knew exactly where to get this from Filehippo....
Right, wrong or indifferent--that's what I did. I know some might not recommend obtaining a file from a source other than the company creating the application--especially since this seems to fly in the face of my own recommendation about sites that offer missing files. While similar, it's not quite the same, and I've had good success with Filehippo. A risk I was willing to accept....
I ran the installation file for 11.1.3.8, and voila: iTunes (the former version not the ill-fated new one) was reinstalled (no error messages during installation); best of all, no missing MSCVR80.dll file upon application launch.
While others seem to have gotten success by removing the apps and reinstalling, I, on the other hand, did not.
Therefore, I will now sit tight at my current version level until Apple better addresses this issue, which, is definitely tied to the new update, as the former version works just fine.
I share this, just in case others, like myself, followed the directions and still had the problem. At least, by visiting Filehippo, one can garner the previous version, and in so doing, re-establish a working version of the application. If Apple provides former versions for download, then, by all means, obtain the file from them. My method was more expedient at the time.
Shared for whatever it is worth.
Good luck to folks who experience this issue.... Hope you either get the matter solved, or you, at least, get back to a version that worked before your parade got rained on....

It all started with Itune issues...

First Itune kept shutting down when opening. Then I began having issues opening certain files. Now iphoto is having trouble. When I try to access material from my computer to put on the web it only allows for me to use the keyboard arrows and won't allow for me to actually post material.

My itunes crashes when I try to sync my iphone or ipad. Tried lots of restarts, safe mode, deauthorizing and reauthorizing, deleting backups. Time Machine reverts to current itunes. It's off to the genius bar tomrrow with all my stuff. Imac running Lion, Ipad 1, iphone 4, all updated on software.

Change Open With for all files with a specific extension

Hi, I've been using OS X for quite some time, but more recently cannot see how you do the following which is proving frustrating:
* Open Get Info for a file,
* Use the drop down under Open With to choose Other,
* Select an appropriate application that wasn't on the drop down list (in this case Smultron text editor for CSV files),
* Press the Change All button and the drop down turns back to Excel which was the previous default.
So basically, how do I change all files with CSV extension to Smultron when Smultron wasn't in the list of Open With items and I have to use Other from the list. This is repeatable for any file type with any application that isn't listed and is on both my iMac and my work's MacBook. Try it yourself and you'll see what I mean!!
Thanks

Stuart Mchattie wrote:
Thanks NeroWolf,
Your solution does work for that single file, but doesn't change the system wide association of that file extension with a particular application. It is because this works that I believe the problem I am having is uncircumventable and is in fact a bug in the OS. Could anyone else confirm this?
Cheers,
Stuart
It might be a bug. What I found is that the icon does not change unless I log out/in or reboot, even when the app normally puts an icon on the file.
For example if I change an audio file to always open with VLC, it does even though the icon remains as before. However, even though clicking plays the audio with VLC, if I right click the file and select "Open With" it still says iTunes (app) default which is incorrect.
Message was edited by: nerowolfe

Request help for synching iPod with iTunes after Windows re-install

I recently reformatted my hard-drive. I have installed iTunes. When I plug in my iPod (old Nano), I get a message asking me to "Erase and Sync" or "Transfer Purchases". My iPod has some purchased songs, and many songs ripped from my CD collection (mp3 format). I would like to have the entire iPod contents populate the new (empty) iTunes library. I am guessing that the Transfer option is the best of the two, but am worried about losing songs, since it would be a lot of work to re-rip the non-purchased songs. Will "Transfer Purchases" transfer all music?
I would appreciate any suggestions, before I proceed. Thanks in advance to any replies.
EMK

*Will "Transfer Purchases" transfer all music?*
No it won't, it will only do what it says which is to transfer purchases, it won't transfer non-purchased items.
*When I plug in my iPod (old Nano), I get a message asking me to "Erase and Sync" or "Transfer Purchases".*
Connect your iPod to your computer. When you get the message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod. When your iPod appears in the iTunes source list change the update setting to manual, that will let you use our iPod without the risk of accidentally erasing it. Check the "manually manage music and videos" box in Summary then press the Apply button. Also when using most of the utilities listed below your iPod needs to be enabled for disc use, changing to manual update will do this by default: Managing content manually on iPod
Once you are safely connected there are a few things you can do to restore your iTunes from the iPod.
The transfer of content sources such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. You'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. Have a look at the web pages and documentation, this is just a small selection of what's available, they are generally quite straightforward. You can read reviews and comparisons of some of them here:
Wired News - Rescue Your Stranded Tunes
Comparison of iPod managers
TuneJack Windows Only
iPod2PC Windows Only
iGadget Windows Only
iDump Windows Only
SharePod Windows Only
iPodRip Mac & Windows
YamiPod Mac and Windows
Music Rescue Mac & Windows
iPodCopy Mac and Windows
iRepo Mac & Windows (iPhone and iPod Touch compatible)
iPod Access Mac & Windows (iPhone and iPod Touch compatible)
As for your purchased songs, the transfer of purchased content from the iPod to authorised computers was introduced with iTunes 7. You'll find details in this article but the utilities above will copy both purchased and non purchased songs anyway: Copying iTunes Store purchases from your iPod or iPhone to a computer
There's also a manual method of copying songs from your iPod to a Mac or PC. The procedure is a bit involved and won't recover playlists but if you're interested it's available on page 2 at this link: Copying Content from your iPod to your Computer - The Definitive Guide
Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync. I would also advise that you get yourself an external hard drive and back your stuff up, relying on an iPod as your sole backup is not a good idea and external drives are comparatively inexpensive these days, you can get loads of storage for a reasonable outlay.

For all those with no sound with ITunes 7.0

Similar Messages

Maybe you are looking for