For all those ZEN MICRO fans who cant get their player working on VISTA - THIS WO

Listen guys.... I dont know who knows what on here but I thought I might share my knowledge (not that I have much )
I have a ZEN Micro player that would not work on VISTA
After a number of attempts and advice from people - I finally got it to work...
YOU DONT HAVE TO UPGRADE THE FIRMWARE
I was going to upgrade but the thing is I run XP and vista and I wanted my MP3 player to be used on both and I also heard that once upgraded then you cannot undo...
I explored my CD installation folder and rightclicked (whilst in VISTA) and went to properties
Once in properties I then clicked the Compatibility tab.
Then I clicked the box which states "run in XP compatibility mode"
It took a while then recognised what I wanted then I clicked apply.
Then I double clicked on the setup application and it run as per usual.
This does work!! Thankgod I didnt upgrade firmware
Thanks everyone on here who has helped me too I just thought I'd pay some people back in return :smileytongue:
Cya's
CC

Solved. My silly mistake.
Uncomment virtual host, e.g.
# Virtual hosts
Include conf/extra/httpd-vhosts.conf

Similar Messages

Zen Micro crashed, now cant get into me

I shut my micro down, it stuck on the shutting down screen, I left it for a while then i took the battery out, when I put it back in now it comes up with the creative logo and non of the buttons work ?
Anyone had this problem, im not happy opnly got it friday and its broke already !
Matt

ryonavin wrote:I would recommend trying to reset it. When you take the battery out there is a little hole that you can stick the end of a paperclip or a ballpoint pen into to flip the reset switch. That fixes most of the issues.
DON'T DO THIS! The small hole on the Micro is NOT a reset switch! It's the MICROPHONE!
To access the Rescue Mode on the Zen Micro you need to remove the battery. While replacing the battery in the back of the player, switch the power button over and keep it held over. The player should boot up into Rescue Mode and from there you should be able to select Clean Up. This acts as a defrag of your firmware and should reset the player to default. If this doesn't work or the player freezes during the clean up try a Format All ( this will erase all media on the hard disk) Again, if this freezes or hangs, the player will most likely need to be replaced.

For all those out there with Iphone5 WIFI issues,Please READ THIS

I pre-ordered my iphone 5 (Black) got that last week. Quickly backed up my Iphone 4 and Restored my iphone 5.The first thing i checked to see is connecting to my WIFI network at home. And i kept getting a message "UNABLE TO CONNECT TO THE NETWORK". I had the iphone 4 aside and i can see iphone 4 is connected just fine. So are my laptop, Ipad and other devices.
So what is different in Iphone5?
After couple of days of head banging, and phone calls with apple support. I finally gave up and went to a apple store , they said, They have not heard any WIFI issues and my case was the first , However to keep me happy they said they will replace my device, But if have the same issue ,they will NOT be able to replace it again. And they even showed me the new iphoen connects to their "Non-secured" apple WIFI network.
So i take the new phone home, and the first thing i try is connecting to WIFI.And i still get "Unable to connect to the wifi network ".And i still can see Iphone 4 working fine and connecting to the same network just fine. With the second iphone5 also not working, I realized it is not hardware, but something surely changed with WIFI in iphone 5. I have a NETGEAR router with its latest firmware installed(2.0.26). I then downgraded my firmware to 2.0.21, then gave a shot.
BINGO..Iphone 5 works fine connects to wifi.and so is my iphone4 too.
So for all those users out there, the fact is something changed in iphone 5 WIFI algorithm. And if anyone really disagrees with me on this, I am going to post a video to demonstrate on YOUTUBE. I believe it is completely UNFAIR for apple to now ask you Upgrade/change your router or its firmware. And it is not fair for router companies to Fix anything to make their firmware compatible with iphone5.
So iphone 5 Users, Please lets us all push for a fix on this issue. WE WANT FIX.

I can't tell you how frustrated/disappointed I was when this exact situation happened to me. I upgraded my wife's iPhone 4 to an iPhone 5 just to find out that it wouldn't connect to my home wifi but would connect everywhere else. Guess what...
I found a fix!!
On you iPhone go to Settings, General, About, scroll to "WiFi Address". Now stay there.
Log-in to your modem thru your web browser via IP Address. (Keep in mind, I use a 2Wire modem, yours may be different) Clicked "Wireless" for wireless settings, scrolled down to "MAC Filtering" and clicked "Edit Allowed/Blocked Device List". At the bottom, there's a field to which you can manually enter a MAC address to you allow or block. If you're using a different modem with different menus/options, just browse around til you find a similar option of manually adding MAC addresses for access or blocking.
MAC Address = Wifi Address. See where i'm going with this?
Type the WiFi Address from you iPhone in the MAC address field, click "Add to List". If MAC filtering is enabled, it'll be added to the BLOCK list, simply click on the address, and click the double arrow pointing towards the ALLOW list so it'll transfer lists to where you want it, then click save.
Now go back to your iPhone and attempt to re-connect to your wifi network as you normally would & voila!
This worked for me, i hope it works for you as well.

Okay. Question for all those IT wirzards (

Okay. Question for all those IT wirzards (& iTunes) experts out there. Anyone know why a playlist (Purchased) keeps dropping off my playlists in iTunes??l This has happened at least 15-20 times to me in the past couipe of years. Fofrtunately for me, I saved these songs to an external hard drive, so retrieval won't be so painful. Guess I just want to know how to avoid this going forward.

Just that one playlist goes missing and no other content? No idea. But it is clear you ought to have a backup so you can restore the database should it happen again.
tt2

Greetings: I have multiple iPads and iPhones. I want all to be able to be able to stream to our Apple TV. All of the docs I see say you must have the same Apple ID for all the devices, but we each have our own Apple ID. Is this just a doc short coming?

Greetings: I have multiple iPads and iPhones. I want all to be able to be able to stream to our Apple TV. All of the docs I see say you must have the same Apple ID for all the devices, but we each have our own Apple ID. Is this just a doc short coming?

You can each have your own ID for your own iTunes accounts, but in order for a device to stream via AirPlay to the same Apple TV, everything must use the same homesharing ID. This is not the same as your iTunes account ID (although it can be for one of the devices)

You do not have sufficient privileges to complete this installation for all users of the machine. Log on as administrator and then retry this installation

Hi all
Have seen a couple threads regarding this but unfortunately nothing that solves my problem thus far!
Right now, our developers are using the Domain Admin account to promote their website code using MSI files. I'd like to change this as I feel the Domain Admin account should be on lock down and only used when absolutely necessary, pretty common. The
same goes for my account too, I would like to absolve as much use of the Domain Admin as I can.
Problem is, when they run installers from their own accounts, they receive this error: You do not have sufficient privileges
to complete this installation for all users of the machine. Log on as administrator and then retry this installation
The accounts they are using are part of the Built In Administrators group and the Domain Admins group... I'm not sure what other permission you'd need in a domain? We've gone as far as explicitly giving them local admin access on this server and still
nothing changes.
Is there a Group Policy or something that I can change to provide install rights and possibly remove these accounts as Domain Admin and more along the line of Power User?
Thanks much for your help!
Ryan

Hi,
You could use Software Restriction Policies (SRP’s) or Applocker(supported on Windows server 2008 R2/Windows 7 only) to restrict the running
of the application for specific user.
Description of the Software Restriction Policies
http://support.microsoft.com/kb/310791
HOW TO: Restrict Users from Running Specific Windows Programs
http://support.microsoft.com/kb/323525
How to Implement Group Policy Security Filtering
http://www.windowsnetworking.com/articles_tutorials/Group-Policy-Security-Filtering.htmlPlease remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

HT2954 In Mail Preferences Color & Fonts I select Georgia Bold Italic 14 for all fonts. Why do I only get Georgia 14 when writing?

In Mail Preferences>Color & Fonts I select Georgia Bold Italic 14 for all fonts. Why do I only get Georgia 14 when writing messages/replies?

Have you checked “Use classic layout”?

Keychain pops up every 30 seconds for all different kinds of apps, and is really slowing my work down.. I am getting really annoyed i have to keep putting in my password. Please help

Keychain pops up every 30 seconds for all different kinds of apps, and is really slowing my work down.. I am getting really annoyed i have to keep putting in my password. Please help

Have you run Keychain First Aid. Utilities> Keychain Access. From the menu bar click on Keychain Access> First aid

I installed Aperture from the App Store, it was working ok, then suf=ddenly it wont load, I get the "Aperture encountered problem" message, have updated all OSX and Aperture but I still cant get it to work, any ideas ?

I installed Aperture from the App Store, it was working ok, then suf=ddenly it wont load, I get the "Aperture encountered problem" message, have updated all OSX and Aperture but I still cant get it to work, any ideas ?

I installed Aperture from the App Store, it was working ok, then suf=ddenly it wont load, I get the "Aperture encountered problem" message, have updated all OSX and Aperture but I still cant get it to work, any ideas ?

Set up ipod touch to cox email, ive tried everything and cant get it to work. thanks!

set up ipod touch to cox email, ive tried everything and cant get it to work. thanks!

Here's an answer from the net:
Go to Settings/Mail,contacts,calendars/Add account choose other, choose Add Mail Account. Fill in name, email address, password and description on the screen that comes up. Save those.
One the next screen tat comes up click om POP in the first line then fil in the host name as
spop.west.cox.net or spop.east.cox.net or the one to go with your region.
Note that is not a misprint, that is spop (secure pop)
Fill in your username one more time (the password should have carried over from previously)
Fill in your outgoing mail server like smtp.west.cox.net (change for your region) and click Save.
When all the settings are verified a checkmark will appear next to them all and you are good to go.
If it says something like "can't connect via SSL would you like to ..." then you probably missed the step about selecting POP on the second screen and are trying IMAP so go back and try over with POP. Or perhaps mistyped soemthing.
Once everything is working you can go back into the settings and see that it has automatically connected on port 995 and that SSL is on
Note that you probably won't be able to send email from a wifi in a cafe or similar as cox won't let you connect to their smtp from outside their network.
I haven't tried receiving mail from a non cox connected wifi yet but I suspect it will work just fine. Anyway these settings work for me using my ipod to my home wifi router connected to cox.
I could not find a definitive guide when I searched so I hope this helps other folks trying to configure this.
I got the spop from "Mail for Mac OS X 10.5 configure SSL / POP" here:
http://support.cox.com/sdccommon/asp...c-7f95e8bcaf39

I cant get ECWID to work on my mobile devices, it only seems to use the desktop site rather that the Tablet or iPhone

I cant get ECWID to work on my mobile devices, it only seems to use the desktop site rather that the Tablet or iPhone? Can anyone help me?

Hi Jim,
We’ll be glad to help you.
Ecwid supports responsive layout, which means that the store pages can adapt to the visitor's screen width on the fly and keep the layout clean and nice. Your products and categories lists will be fit for any window's size, as Ecwid will calculate the most suitable number of products or categories in row automatically. In other words, Ecwid looks great on any mobile devices. You can check how your Ecwid store may look on smartphones and tablets, if you see your Starter Site (what it is).
However, if you want Ecwid reveals itself in all its glory, you should embed your Ecwid store into website, which also support responsive layout, because if the site doesn’t adapt to size screen, Ecwid is not able to determine how it should be changed since it’s just a part of the site.
We’ve checked your site and found that you used Adobe Muse for building your site. Using Adobe Muse, you can create alternate site layouts for web content to be displayed on desktop, smartphones, and tablets. Nonetheless, your site has a layout for desktops only, that’s why it looks the same on all devices. You can learn how to create those alternate layouts in Adobe Muse, by reading “Creating a Website for Mobile Devices” article.
I hope this helps! But if there are any questions, don’t hesitate to reach us out on Ecwid forums.

Apple Please sort out the V 11.1.4 problems as I cant get iTunes to work now. You need to have a new version asap

Please sort out the V 11.1.4 problems as I cant get iTunes to work now. You need to have a new version asap

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Strange problem. I have upgraded to OSX 10.9.1 but cant get wifi to work so forced to be hard wired. Any inputs appreciated.

Hi All,
Strange problem. I have upgraded to OSX 10.9.1 but cant get wifi to work so forced to be hard wired. Any inputs appreciated. Problem is I cant even reinstall it as I saw on a thread reason, it needs wifi to begin.

It only needs an internet connection - wired or wireless.
Fixing a Mavericks Installation Problem
How to manage a failed OS X Mavericks installation | MacFixIt - CNET Reviews.
Try these in order:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
     after the chime press and hold down the OPTION key until the boot manager screen appears.
     Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

I cant get itunes to work on my new Sony Vaio. Im running Windows 8.1.

i cant get itunes to work on my new Sony Vaio. Im running Windows 8.1. Anyone have a fix?

Hello philtapevans,
The following article provides information and steps that can help get iTunes installed on your computer.
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Cheers,
Allen

Cant get Frontrow to work after installing 10.4.3 and updating it

I made a terrible mistake today and moved all my files from my harddisk to my external harddisk. I had to reinstall everything but I cant get frontrow to work properly. I cant find it on my external harddisk either.
Can someone please help me with this tricky question.

Winbo:
Can you describe your problem in a bit more detail? Why did you decide to move your files? What files did you move? What method did you use to move them? Did you move them over completely by way of backing up and then erased your disk prior to moving them back?
Any other information you can provide will make it easier to make suggestions on your issue.
Good luck.
cornelius
PismoG4 550, 100GB 5400 Toshiba internal, 1 GB RAM; Pismo 500 OS X (10.4.5) Mac OS X (10.4.5) Beige G3 OS 8.6

For all those ZEN MICRO fans who cant get their player working on VISTA - THIS WO

Similar Messages

Maybe you are looking for