For all you old Mac Users

Remember INITS? Small wonderful applications that you could install and just do about anything with. Though I am a obvious now a OS. X user I need a INIT type application.
I am looking for a good, old fashioned Monitor/Display Utility, to simply adgust my Contrast, Levels & Balances.
I have tried the typical ColorSync Utility and the Display/System Preferences Panel and they are... useless[at least for this cause].
Does anybody know of a OS X Utility INIT that can achieved this?

On question, where would you keep files that are not current but not old if you get me. For example, a folder of short, funny movie clips that is added to rarely, but is added to?
The only difference is that I keep my raw footage, for fear of needing it in the future.
I keep all raw footage, i.e. I keep the original tapes.
The finished movies end up on a DVD (also a kind of backup), the TS files are kept on the external in its Movie Folder for instant playback as required, as are those snippets, free title sequences (clouds, waves etc), and bits and pieces one receives from friends and relatives. These all have an alias in the Movies Folder on the internal drive so Front Row can find them. Similar setup with the iTunes library.
My Documents Folder is also backed up regularly on to DVDs, but otherwise just kept up to date as part of the regular cloning.
Not (yet) having a digital camera, my 9000 or so scanned negatives and slides (200 dpi TIFF files, each around 8MB) are sorted in folders by year, each of which is backed up on DVDs, and the entire 'Archive' is backed up on the external drive on two different partitions. Yes, I know, that is like keeping the only two copies of your will in the same safe, but for me that will have to do!
As for fragmentation, that really is not a problem with OS X. Perhaps one could, every year or two, delete the internal drive and clone back from the clone, if you see what I mean. But even via firewire it takes half a day to copy up to 200GB, and life is short enough already!

Similar Messages

I need help for all you wise Mac users... please

Yesterday, my beloved Mac started acting strangely. Just before that, I uploaded some photos my daughter emailed to my yahoo address. I placed the 8 photos in IPhoto, then tried to go back to Pogo.com where I spend most of my puter time. (Pogo is very Java-based, so I empty the cache, delete cookies and temp files regularly.) Pogo home page just barely loaded, very slow, and none of the games would open. When I tried to stop a game from loading, it froze. I finally had to Force Quit Safari.
In the past when Safari has acted up, the first, and most times the last thing I do is repair disk in Disk Utility. That did nothing to help this new problem. So I came here and started following suggestions I found. So far (with no luck fixing the problem) I have:
1. Made sure Javascript is enabled in Safari/Pref/Security. It was.
2. Trashed cookie.plist, then restarted Safari
3. Trashed Safari cache folder in Library/Caches/Safari, then restarted Safari
4. Booted from Install disk, repaired HD in Disk Utility (disk was fine, verified no problems)
5. Did the Apple Hardware test, that was fine (thank goodness!)
6. Installed Shiira to see if it had the same slow, hang, freeze that Safari has. It does. So, in fact, does Firefox.
I'm sure there were a few other things I tried, but can't remember them now. What the heck is going on with my browsers? And how can I fix them? Help, please.
ibook G4 Mac OS X (10.4.9)

You have done your homework but perhaps it's the Safari preference file... they can become corrupted. Locate this file; com.apple.safari.plist
It's here: /Users/YourName/Library/Preferences. Open the Preferences folder, locate that file and drag it to your Desktop. Relaunch Safari. If it still acts up, drag that com.apple.safari.plist file to the Trash. It's the culprit. Reboot your iBook. And your Mac will create a new Safari.plist file for you. You will have to reset your Safari preferences but it just might do the trick.
If this doesn't do the trick, post back. ** You will get more feedback... just be patient.
Carolyn

A tip/hint for all you software instrument users or should be users

unless Apple starts making thicker, fuller sounding instruments for midi usage
or sound fonts get better or the interfase is built up to allow for easy and good midi out functioning thus the ability to layer external synths, you are stuck with the sounds you get.
But a tremendous perk for your musical compositions in GB is the ability to copy a track of midi data or audio data and even triple or quadruple it. Using the same or different instruments and effects will certainly come close to professionalizing the sound. You might need lots of power to do this. I dont know and its a shame that GB is a RAM eater. It might seem like a severe neurosis or ridiculous overkill but i run GB without any other app on except mail and with 10 GB RAM on a MACPRO and as soon as the new ones come out soon
<edited by host - see the [Terms of Use|http://discussions.apple.com/help.jspa#terms] section 2.1.1>. I cant see fully enjoying GB without lots of power. Its ease of use has me hooked and what can be done with it with a lot of patience and tricks like the one i gave you is astounding. I bought LOGIC EXPRESS a few years ago and threw it in the Garbage it tortured me so and stopped me from making music. I dont want more manuals. I want melodic passages.
So triple your data tracks and add effects and save up for a powerful MAC and make GB really do a better job for you.
<edited by host - see the [Terms of Use|http://discussions.apple.com/help.jspa#terms], section 2.6.3>
take care best of luck,
glenn

Mastering is a life long pursuit. No matter how much you do there is always something more you can learn and do. Long term practice of the art of mastering often leads to ones "style" or technique but the learning never stops.
I think the best way to get an overall grip on modern mixing today for me at least is from absorption from the magazine Computer Music.
http://www.computermusic.co.uk/
It is available in the U.S.
It may seem overwhelming at first read but over time if you read the articles even without fully understanding them the process of osmosis begins to set in.
I think the articles in this magazine can really enlighten the reader to a lot of different approaches to mixing and mastering.
Its really a great wealth of technique. After a year of just exposing yourself to it you will be light years ahead in mixing and mastering technique. That includes everything from compression on ward.
If you do not work with or in a pro mixing house it is not all that easy to learn many of these techniques. This is the advantage of a magazine like Computer Music. Its like visiting Bob down in mixing bay A and sitting with him while he does a session.

I bought a new iPhone and only photos from the last 30 days were transferred to my photostram on icloud. I thought icloud was the storage for all my old photos. How do I access the old photos on icloud?

I bought a new iPhone 5. Only photos from the last 30 days were transferred to my photostream on iCloud. I thought iClud was the storage for all the old photos. How do I access the older photos than 30 days on iCloud?

janqfromnor wrote:
I bought a new iPhone 5. Only photos from the last 30 days were transferred to my photostream on iCloud. I thought iClud was the storage for all the old photos. How do I access the older photos than 30 days on iCloud?
Where, exactly, did you read anything from Apple that suggested that iCloud Photostream was permanent storage?

Is there a way to create a "common desktop" for all RD/TS 2012 users? (Office 2010 icons on the dekstop, for example.)

Hello! Just like the title, is there a way to create a "common desktop" for all RD/TS 2012 users?
I know how to do this using regular W7 workstations and 2008 Servers, but the "Default" folder under the USERS directory is gone and I'm not sure how to get the icons there in Windows 8, let alone Server 2012 Remote Desktop.
I've installed Office 2010 on the 2012 server, but every end user that logs in has to manually type in "Word," "Excel." "PowerPoint." etc from the metro interface, then right-click each icon to add the shortcut to the desktop.
Given the... uh.. unfamiliarity of our endusers around the computer, this really isn't the best option. What I'd like is them to log on and have all the Office icons ready and availible for them.
Any ideas?
Matthew J. Fazio

Hi,
You can edit the local GPP and create a desktop shortcut for all users.
Reference:
Customize the default local user profile in windows Server 2012
http://social.technet.microsoft.com/Forums/windowsserver/en-US/3f178a0e-128e-4f4f-870a-90c8bbf1afeb/customize-the-default-local-user-profile-in-windows-server-2012?forum=winserver8gen
Also, you can use CopyProfile to customize the Default User Profile.
Customize the Default User Profile by Using CopyProfile
http://technet.microsoft.com/en-us/library/hh825135.aspx
Best Regards.
Jeremy Wu
TechNet Community Support

I have iphone 4 with ios 7.0.3. but with ios 7.0.3 my phone is working very slow. please do something for all the iphone 4 user.

i have iphone 4 with ios 7.0.3. but with ios 7.0.3 my phone is working very slow. please do something for all the iphone 4 user.

Hi Tyler199869,
If you are having issues making or receiving calls after updating your iPhone, you may find the following article helpful:
iPhone: Troubleshooting issues making or receiving calls
https://support.apple.com/kb/TS3406
Regards,
- Brenden

Got a question for all you peeps dos anyone know about i phones i have a i phone 3gs which i got unlocked i did a master reset or summin and just had a pic of apple so i plugged it in i tunes downloaded and it now says no service at the top of phone and i

got a question for all you peeps
dos anyone know about i phones i have a i phone 3gs which i got unlocked i did a master reset or summin and just had a pic of apple so i plugged it in i tunes downloaded and it now says no service at the top of phone and i tunes says invalid sim i put the correct sim in it used to be locked too and still says same pls any one with ideas?

hi sorry what happoned is that ages ago i brought a i phone 3gs on 02 network i went to a sml phone shop and payed for them to unlock it. it has been fine till yesterday when i went to reset it from the phone it then turned off and came back on just just an image of a apple for about an hour so i connected to i tunes and it said downloading software after another hr it had finished but then i tunes said in had to insert a sim so i had to un plug the phone from laptop while i did this i put my orange sim in and the i phone said where do i live and had to connect to a internet connection but all the time saying no service where the signal bar is and then says activating i phone it took a few min and said couldnt finish it bec of the signal and to connect it to i tunes to do it so i connected it to itunes and i tunes just keeps saying invalid sim so i took my orange sim out and put a 02 sim in and is still saying invalid sim on itunes?

Is LION OS working well for all you?

Is LION OS working well for all you? never thought it could be such a problem, it's the fisrt time it happens to me with an Apple product!. problems with safari, aperture, iphoto, opening/closing windows, right now is so close in performance to all windows versions than Apple high quality products at the level that all we have been expected with the release of Lion. Really dissappointed, and just hope that Apple tech suppor team solves this situation with a new sofware update.

For most yes, For me definitely yes. I upgraded over SL, used it for a week or more. Then updated my daughter's i5 MBP. that went well and she is happy. Then I updated my wife's MB Air. now THAT should tell you the confidence I have built in Lion. !!!

What is the best way to remove personal data from the hard drive in preparation for selling my old Mac?

I am going to sell or perhaps donate my old Power Mac G5. Is there an easier, yet comprehensive way to remove my data from the hard-drive? My best approach is dumping anything I do not want found into the trash.
I am running Mac OS 10.5.8 on the powermac G5

For better security than the simple Erase (which does not actually over-write the data blocks, only clears the directory), choose Security Options, and Zero all data, one pass.
After a Zero all data, the only way to recover the data is to dis-assemble the drive in a clean room and use expensive test gear to recover a little of the data. That is good for all but Military Secrets.
If you really trust no one under any circumstances, remove the drive and beat it to death with a hammer.

How to export for both windows and mac users

I'm new to the video stuff, so i have a few questions. i am planning to post videos on my blog. I want to have them in a format that both windows and mac users can play. is this a possibility or will i have to export .wmv for windows and quicktime for mac? i realize that windows users can download quicktime, but i either want the video to be viewable in a format that can be read by all without having to download anything (might be too big a wish :o) ). if i can't do that, then i'd like to have 2 links - one for quicktime and one to the .wmv. in this case, how to i export a .wmv file? i don't see that option anywhere on the share menu? do i need to buy quicktime pro? that leads me to another questions - if i have imovie, do i need quicktime pro? so far i'm having a hard time figuring out what quicktime pro has that imovie doesn't....thanks in advance!

I'm new to the video stuff, so i have a few questions. i am planning to post videos on my blog. I want to have them in a format that both windows and mac users can play. is this a possibility or will i have to export .wmv for windows and quicktime for mac? i realize that windows users can download quicktime, but i either want the video to be viewable in a format that can be read by all without having to download anything (might be too big a wish :o) ).
Posting to YouTube and providing a URL link might be the most universal method of playback although quality may be on the weak side.
if i can't do that, then i'd like to have 2 links - one for quicktime and one to the .wmv. in this case, how to i export a .wmv file?
WMV is a proprietary compression format. You will either have to purchase the authorized QT components from Flip4Mac or purchase a separate open source converter application like Visual Hub.
i don't see that option anywhere on the share menu?
Any you won't even if you purchase and install the QT component -- iMovie '08 only exports to QT compression formats.
do i need to buy quicktime pro?
It wouldn't help. Getting QT Pro only unlocks editing and conversion features. It does not add any additional codecs which don't already have installed.
if i have imovie, do i need quicktime pro? so far i'm having a hard time figuring out what quicktime pro has that imovie doesn't.
As indicated above, QT Pro allows you to convert to/from any compression formats for which you have working import/export QT components. This can already be be done using GarageBand and iMovie. GarageBand allows you to access any installed QT import/export component while iMovie '08 restricts you to Apple QT components. In addition, QT Pro allows you to create player displays with multiple audio/video tracks, gives you ability to layer graphic elements (e.g, create watermarks, create pictures-within-pictures, etc,), allow the viewer to switch between alternate audio and/or video tracks, and may other things.
ADDED: If you really want to see what QT Pro can do, check out QTKirk's examples on his DotMac account.
Message was edited by: Jon Walker

Possible solution for all you that have skipping songs, & scratchy sound

Hi All,
After upgrading to 7.02, I was extremely annoyed with the performance. But here's what I found and did. In a nutshell, you uninstall the new version and install a 6.05 version or earlier. I'll include some links to what I found and hopefully it'll help. Here's the first link and it describes what you need to do. Scroll down to the post by marlowe5 posted 10-08-2006, 8:06 A.M. and I also included the exact wording from the post below the link.
http://www.oldapps.com/forum/archive/index.php/t-228.html
This is the exact wording:
Thanks for the advise in this post... after installing iTunes 7, and then 7.01, my computer was running really slow, iTunes was skiping and garbling and acting terribly... so I really needed to go back to 6.05.
For all of you that need to do the same it's pretty easy:
I downloaded the 6.05 install file from from oldapps, uninstalled 7.01 and then re-installed 6.05. When I ran iTunes it did give me the error message that the library file was created in a new version and couldn't open, but I then deleted the 'itunes library.itl' file (in My Music > iTunes folder) and then replaced it with the backup that was automatically created when I installed 7.01 (in My Music > iTunes > Previous iTunes Libraries). iTunes then started up fine with all my music and playlists. And all the skipping and CPU bogging is better now.
Library file note:
With the library file, when you update iTunes it also updates the library file, which won't work with older versions. So you need to replace this file or create a new one. I would recommend copying/backing up the new library file to a different location to be safe instead of just deleting it. You'll see above where to find the new library file and prior ones. When I made these changes I did two things to be safe, 1) I moved the new "iTunes library.itl" to a backup location instead of deleting it 2) I moved my most recent old library file from(My Music > iTunes > Previous iTunes Libraries) to (My Music > iTunes folder)and renamed it to "iTunes library.itl". It was previously "iTunes library 2006-1-18.itl." Before renaming it, iTunes didn't find the library so renaming it worked. Your file name will most likely have a different date so don't look for the exact file I mentioned. Plus it's probably a good idea to make a copy or back up this library file too.
If you don't have any previous library files, you may need to create a new one. I don't have the info but I believe the link to the post should have that info.
After reading through the post and other info, the only thing that it appears might be lost are playlists that have been created since the upgrade. I don't believe any music should be lost but that's why it's safer to backup the new library just in case. I did not lose any music.
Also, here's a link to where I found old versions of iTunes:
http://www.filehippo.com/download_itunes/?1249
Hopefully this helps and good luck. I'm back to normal now.
Dell Dimension 4550 Windows XP
Dell Dimension 4550 Windows XP
Dell Dimension 4550 Windows XP

Soccerteen,
Make sure you try all the other remedies mentioned in other posts. If this didn't work for you then try below. I consider it a last ditch effort since it's going back to a previous version, which unfortunately works much better than 7.0x for me.
Remove & backup your current library file to a different file/location to be safe. Once you do that, uninstall 7.02, and then install 6.05 or any 6 version. Once 6.0x is installed and you've opened it, you'll need to create a new library file. If you've removed the library file from (My Music > iTunes folder)it should load up with a blank slate. What you to do from this point is create a new library file. Read the oldapps link, the post from "Admin" dated 9-30-2006 5:30 PM should help. Most likely all of your music will be under one main file but you might have to add individual folders one at a time depending on how much music you have. Since I didn't have to go this route, I'm not sure if it's the best route but after reading multiple post, this was the most common suggestion. Worst case scenario, you can always reload 7.02 an reinsert the backup library file, which will put you back where you started.
Hope that works for you and good luck!

Challenge for all you great programmers out there...i need help!

Okay, my name is Tom. I am attending a small private
college where the computer program is very small. There are
no Java professors or any professors with any experience.
The library has only 3 beginner books on Java as well. So,
for my extremely ambitious Internal Internship Project I
need some help. I have taken a beginner course and am very
apt to learning, so this shouldn't be over my head. Now to
the project:
GUI
I have envisioned a utility automation program. Basically,
There is 1 main pane in the GUI. I have already designed it
but am open to suggestions. It consists of the important
parts: The utilty buttons (on the left), the textArea (in
the middle), and checkboxes (on the right). When opening
the program, the textArea will simply display instructions
on how to use the program. There will be as many buttons as
utilities there are (for now i am experimenting with
defrag), and the checkboxes will be aligned with the
utility buttons but to the right of the textArea.
Function
When each utility button is clicked, a description of the
utility comes up in the textArea. If you decide to use it
then check the appropriate checkbox to the right of the
textArea. Once you choose all the utilities that you want
to do, then you hit the start button.
Execution
This will automate all of the programs so you can leave and
come back.
Things needed
I need to know how to import text files to the textArea,
how to program the textAreas to come up, and one final
thing for now. I will have to somehow set the parameters to
those applications automatically (Ex: "what drive to
defrag"). So, my first thought would be create a popup
window that asks for all of the parameters needed for each
utility, define those values as variables, and then when
the utilities ask for them in the automation feed them the
variables.
I have put about 25 hours into making the GUI, and
designing the structure. I need a ton of help if I want to
get this done. I am using Netbeans for convenience but I'm
not sure i know how to insert custom code.
Any help the ANYONE can give me would be extremely
appreciated.
Thanks to all, and have a great day.
Tom

Here is my code for my GUI
* JFMainMenu.java
* Created on February 10, 2008, 10:16 PM
package internshipproject;
* @author admin
public class JFMainMenu extends javax.swing.JFrame {
/** Creates new form JFMainMenu */
public JFMainMenu() {
initComponents();
/** This method is called from within the constructor to
* initialize the form.
* WARNING: Do NOT modify this code. The content of this method is
* always regenerated by the Form Editor.
// <editor-fold defaultstate="collapsed" desc="Generated Code">
private void initComponents() {
jPanel1 = new javax.swing.JPanel();
JBTomPic = new javax.swing.JButton();
jScrollPane1 = new javax.swing.JScrollPane();
jTextPane1 = new javax.swing.JTextPane();
jScrollPane2 = new javax.swing.JScrollPane();
jTextPane2 = new javax.swing.JTextPane();
jScrollPane3 = new javax.swing.JScrollPane();
JTPHeader = new javax.swing.JTextPane();
jSeparator1 = new javax.swing.JSeparator();
jLabel1 = new javax.swing.JLabel();
jLabel2 = new javax.swing.JLabel();
jLabel3 = new javax.swing.JLabel();
jButton1 = new javax.swing.JButton();
jButton2 = new javax.swing.JButton();
jButton3 = new javax.swing.JButton();
jCheckBox1 = new javax.swing.JCheckBox();
jCheckBox2 = new javax.swing.JCheckBox();
jCheckBox3 = new javax.swing.JCheckBox();
jButton4 = new javax.swing.JButton();
jButton5 = new javax.swing.JButton();
jTextField1 = new javax.swing.JTextField();
setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE);
setResizable(false);
jPanel1.setBackground(new java.awt.Color(0, 0, 0));
JBTomPic.setBackground(new java.awt.Color(0, 0, 0));
JBTomPic.setIcon(new javax.swing.ImageIcon("C:\\Documents and Settings\\All Users\\Documents\\My Pictures\\Sample Pictures\\TomBorder.jpg")); // NOI18N
JBTomPic.setActionCommand("AboutMe\n");
JBTomPic.setBorderPainted(false);
JBTomPic.setContentAreaFilled(false);
JBTomPic.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
JBTomPicActionPerformed(evt);
jTextPane1.setBackground(new java.awt.Color(0, 0, 0));
jTextPane1.setBorder(null);
jTextPane1.setEditable(false);
jTextPane1.setFont(new java.awt.Font("Comic Sans MS", 3, 40));
jTextPane1.setForeground(new java.awt.Color(255, 255, 255));
jTextPane1.setText(" Just start it up, then go to lunch!");
jTextPane1.setCaretColor(new java.awt.Color(0, 51, 51));
jScrollPane1.setViewportView(jTextPane1);
jTextPane2.setBackground(new java.awt.Color(0, 0, 0));
jTextPane2.setBorder(null);
jTextPane2.setEditable(false);
jTextPane2.setFont(new java.awt.Font("Comic Sans MS", 3, 26));
jTextPane2.setForeground(new java.awt.Color(255, 255, 255));
jTextPane2.setText(" An amazing program that automates your computer maintainance applications!");
jScrollPane2.setViewportView(jTextPane2);
JTPHeader.setBackground(new java.awt.Color(0, 0, 0));
JTPHeader.setBorder(null);
JTPHeader.setEditable(false);
JTPHeader.setFont(new java.awt.Font("Comic Sans MS", 3, 20));
JTPHeader.setForeground(new java.awt.Color(255, 255, 255));
JTPHeader.setText(" Welcome to Tom's PC Fix");
jScrollPane3.setViewportView(JTPHeader);
jLabel1.setBackground(new java.awt.Color(51, 51, 0));
jLabel1.setFont(new java.awt.Font("Tahoma", 1, 20));
jLabel1.setForeground(new java.awt.Color(255, 255, 255));
jLabel1.setText("Choose Your maintainance:");
jLabel2.setBackground(new java.awt.Color(51, 51, 0));
jLabel2.setFont(new java.awt.Font("Tahoma", 1, 20));
jLabel2.setForeground(new java.awt.Color(255, 255, 255));
jLabel2.setText("Check to add to automation:");
jLabel3.setBackground(new java.awt.Color(51, 51, 0));
jLabel3.setFont(new java.awt.Font("Tahoma", 1, 20));
jLabel3.setForeground(new java.awt.Color(255, 255, 255));
jLabel3.setText("Description:");
jButton1.setBackground(new java.awt.Color(255, 255, 255));
jButton1.setFont(new java.awt.Font("Comic Sans MS", 1, 15));
jButton1.setForeground(new java.awt.Color(51, 0, 51));
jButton1.setText("Spybot");
jButton1.setBorderPainted(false);
jButton1.setFocusPainted(false);
jButton1.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
jButton1ActionPerformed(evt);
jButton2.setBackground(new java.awt.Color(255, 255, 255));
jButton2.setFont(new java.awt.Font("Comic Sans MS", 1, 15));
jButton2.setForeground(new java.awt.Color(51, 0, 51));
jButton2.setText("Disk Cleanup");
jButton2.setBorderPainted(false);
jButton2.setFocusPainted(false);
jButton3.setBackground(new java.awt.Color(255, 255, 255));
jButton3.setFont(new java.awt.Font("Comic Sans MS", 1, 15));
jButton3.setForeground(new java.awt.Color(51, 0, 51));
jButton3.setText("Deframentation");
jButton3.setBorderPainted(false);
jButton3.setFocusPainted(false);
jCheckBox1.setBackground(new java.awt.Color(255, 255, 255));
jCheckBox1.setFont(new java.awt.Font("Comic Sans MS", 1, 12));
jCheckBox2.setBackground(new java.awt.Color(255, 255, 255));
jCheckBox2.setFont(new java.awt.Font("Comic Sans MS", 1, 12));
jCheckBox3.setBackground(new java.awt.Color(255, 255, 255));
jCheckBox3.setFont(new java.awt.Font("Comic Sans MS", 1, 12));
jButton4.setBackground(new java.awt.Color(255, 255, 255));
jButton4.setFont(new java.awt.Font("Comic Sans MS", 1, 20));
jButton4.setText("Start");
jButton5.setBackground(new java.awt.Color(255, 255, 255));
jButton5.setFont(new java.awt.Font("Comic Sans MS", 1, 15));
jButton5.setText("Exit");
jTextField1.setEditable(false);
jTextField1.setText("fcghjdcfhgj");
jTextField1.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
jTextField1ActionPerformed(evt);
org.jdesktop.layout.GroupLayout jPanel1Layout = new org.jdesktop.layout.GroupLayout(jPanel1);
jPanel1.setLayout(jPanel1Layout);
jPanel1Layout.setHorizontalGroup(
jPanel1Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jPanel1Layout.createSequentialGroup()
.add(jScrollPane2, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 323, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
.add(JBTomPic, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 186, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
.add(jScrollPane1, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 320, Short.MAX_VALUE))
.add(jScrollPane3, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 841, Short.MAX_VALUE)
.add(org.jdesktop.layout.GroupLayout.TRAILING, jSeparator1, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 841, Short.MAX_VALUE)
.add(jPanel1Layout.createSequentialGroup()
.addContainerGap()
.add(jLabel1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 277, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.add(71, 71, 71)
.add(jLabel3)
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED, 66, Short.MAX_VALUE)
.add(jLabel2)
.addContainerGap())
.add(org.jdesktop.layout.GroupLayout.TRAILING, jPanel1Layout.createSequentialGroup()
.add(jPanel1Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jPanel1Layout.createSequentialGroup()
.add(30, 30, 30)
.add(jPanel1Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING, false)
.add(jButton3, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE)
.add(jButton2, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE)
.add(jButton1, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE))
.add(133, 133, 133)
.add(jTextField1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 339, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE))
.add(jPanel1Layout.createSequentialGroup()
.add(349, 349, 349)
.add(jButton4, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 143, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)))
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED, 113, Short.MAX_VALUE)
.add(jPanel1Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jPanel1Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.TRAILING)
.add(jCheckBox1)
.add(jCheckBox3)
.add(jCheckBox2))
.add(jButton5))
.add(21, 21, 21))
jPanel1Layout.setVerticalGroup(
jPanel1Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(org.jdesktop.layout.GroupLayout.TRAILING, jPanel1Layout.createSequentialGroup()
.add(jScrollPane3, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.add(7, 7, 7)
.add(jPanel1Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jScrollPane2, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 183, Short.MAX_VALUE)
.add(jPanel1Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING, false)
.add(jScrollPane1)
.add(JBTomPic, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 183, Short.MAX_VALUE)))
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
.add(jSeparator1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 10, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.add(18, 18, 18)
.add(jPanel1Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.BASELINE)
.add(jLabel1)
.add(jLabel2)
.add(jLabel3))
.add(86, 86, 86)
.add(jPanel1Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jPanel1Layout.createSequentialGroup()
.add(jPanel1Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jButton1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 44, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.add(jCheckBox1))
.add(62, 62, 62)
.add(jPanel1Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jCheckBox2)
.add(jButton2, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 44, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE))
.add(67, 67, 67)
.add(jPanel1Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jCheckBox3)
.add(jButton3, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 44, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)))
.add(jTextField1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 318, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE))
.add(53, 53, 53)
.add(jPanel1Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.BASELINE)
.add(jButton4, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 41, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.add(jButton5, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 36, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE))
.add(58, 58, 58))
org.jdesktop.layout.GroupLayout layout = new org.jdesktop.layout.GroupLayout(getContentPane());
getContentPane().setLayout(layout);
layout.setHorizontalGroup(
layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(org.jdesktop.layout.GroupLayout.TRAILING, jPanel1, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE)
layout.setVerticalGroup(
layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jPanel1, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE)
pack();
}// </editor-fold>
private void JBTomPicActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
private void jButton1ActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
private void jTextField1ActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
* @param args the command line arguments
public static void main(String args[]) {
java.awt.EventQueue.invokeLater(new Runnable() {
public void run() {
new JFMainMenu().setVisible(true);
// Variables declaration - do not modify
private javax.swing.JButton JBTomPic;
private javax.swing.JTextPane JTPHeader;
private javax.swing.JButton jButton1;
private javax.swing.JButton jButton2;
private javax.swing.JButton jButton3;
private javax.swing.JButton jButton4;
private javax.swing.JButton jButton5;
private javax.swing.JCheckBox jCheckBox1;
private javax.swing.JCheckBox jCheckBox2;
private javax.swing.JCheckBox jCheckBox3;
private javax.swing.JLabel jLabel1;
private javax.swing.JLabel jLabel2;
private javax.swing.JLabel jLabel3;
private javax.swing.JPanel jPanel1;
private javax.swing.JScrollPane jScrollPane1;
private javax.swing.JScrollPane jScrollPane2;
private javax.swing.JScrollPane jScrollPane3;
private javax.swing.JSeparator jSeparator1;
private javax.swing.JTextField jTextField1;
private javax.swing.JTextPane jTextPane1;
private javax.swing.JTextPane jTextPane2;
// End of variables declaration
}

Setting the Default Homepage for all current and new users but leave it user modifiable.

I am in the process of creating our new Windows Deployment Image based on Windows 7. Previously I was able to use the browserconfig.properties file in the Firefox main program files directory to change the default homepage for all new profiles while still allowing the user of any given profile to change their homepage. I have not yet found any equivilent in FireFox 4. Any help would be appreciated. Thanks.

> The locations of the files are different and none of them show up under
> the new user, but do show up for existing users.
Enable logging for GPP files to see what's happening:
http://blogs.technet.com/b/askds/archive/2008/07/18/enabling-group-policy-preferences-debug-logging-using-the-rsat.aspx
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Asian Pacific Language installation for blackberry curve 3g (mac user)

Hi there,
I just bought a new bb curve 3g. I'm a mac user and can't find the bb desktop for mac, which "including" multi-language pack like the one for pc. I'm wondering where can I download the language pack to be able to install in my bb device.
I can read Thai in my mobile (I bought the device in UK).
Cheers

Hi there,
I just bought a new bb curve 3g. I'm a mac user and can't find the bb desktop for mac, which "including" multi-language pack like the one for pc. I'm wondering where can I download the language pack to be able to install in my bb device.
I can read Thai in my mobile (I bought the device in UK).
Cheers

Thanks for all you early adopters-seriously

Sincere thanks for all of you who jumped in and started using it. I am sure that it is a better computer because of all the feedback that the company has received. I have been reading the posts and am looking forward to getting the next edition/revision.
As one poster wrote, the advantage you have over me is that you have the computer to use now, and I am waiting. It will be a much used and appreciated tool when I get one. The funds are not available for me to get one yet but am looking at the beginning of the year.
The only ones I have seen are in stores. I wish I knew how loud the fans get when they come on as I have not heard them.
Some have described them as really loud. Any input here?
It looks like most of the main issues that I have read about have been resolved. The latest seems to be the dependability of the SuperDrive, but they may just be that percentage of products that are problematic out of the box.
I get the impression that these things are selling like hot cakes, so the numbers out there vs. the posts are probably staggering.
Thanks again, and I hope everyone gets their computer working the way they expect it to.

Hey, you're welcome! Hahaha
Well I've had mine for over 3 months now and I've zero problems with it. To answer some of your questions:
- the fans do not get horrendously loud as some people have stated. The only time I've heard them on is when I'm playing games (call of duty 2, halo, tiger woods), encoding a dvd, watching large videos on iTunes; so pretty much cpu intensive tasks. They don't come on with usual surfing, chatting, emailing, word processing.
- yeah, i've read the posts about the superdrives too. But I haven't had any problems with mine. I've ripped about 10-15 music cd's from my collection and burned many dvd's with it without a problem.
Enjoy your macbook when you get it!

For all you old Mac Users

Similar Messages

Maybe you are looking for