For anyone with HH5 OpenRG reboots

I'm sick of this now. Let's contact BT's representatives here.
They are adamant we all have a faulty line which is the cause.
So we can give them 2 weeks to fix our lines and from then on we can pay 1/2 price for compromised service until they fix it, can't we?

rhomb wrote:
I'm sick of this now. Let's contact BT's representatives here.
They are adamant we all have a faulty line which is the cause.
So we can give them 2 weeks to fix our lines and from then on we can pay 1/2 price for compromised service until they fix it, can't we?
Have a look at these threads and in particular the post by the moderator
https://community.bt.com/t5/BT-Infinity-Speed-Connection/PPP-LCP-Send-Termination-Request-User-reque...
https://community.bt.com/t5/BT-Infinity-Speed-Connection/Odd-Disconnections-PPP-LCP-Send-Termination...

Similar Messages

  • 'Genius' related question for anyone with over 1.2TB of music?

    Anyone out there with a iTunes library with over 1.2TB of music?
    Reason I ask, is that I've not been able to solve a problem in updating Genuis - I'm getting the error - 'Genius results can't be updated right now. There is not enough memory available ~ Please try again later.' or the 'unknown 4002 error'.  The steps I've taken to try and correct sometime back can be found in https://discussions.apple.com/message/12584815#12584815 and also shown here in sequence below. 
    I keep thinking this will be fixed with the next version iTunes but so far with the latest, things still the same.  So looking to see if anyone with a similar size library is having similar problems and it just a limitation of the program or it's something specific on my end that I can fix.
    Appreciate...
    Up to this weekend I've had not issues with Genius. Worked beautifully and updated last Sunday as I have been doing every week since Apple added Genius. Yesterday I added a few albums and went to update and now getting the error of 'Genius results can't be updated right now. There is not enough memory available ~ Please try again later.' Now my library is well over >200,000 songs and only added 6 albums this time. Music sits on a external 2TB drive ~100GB free and my MacBook Pro has over 60GB open. Running latest Mac OSX and latest iTunes. Nothing new installed or changed since last Genius update.
    To the points raised in this thread.
    1. I've been updated weekly with a Library with over 200K songs till now with no problem. Majority is what I've ripped from my albums & CDs.
    2. Deleted the albums recently added since last successful update - same result.
    3. Connected directly to the network bypassing router as suggested here - same result.
    4. Reinstalled iTunes program - same result.
    5. Repaired permissions - same result.
    Problem remains. Welcome any additional thoughts.
    Question for anyone with a music library
    https://discussions.apple.com/message/12584815#12584815
    Ok, tried all the suggestions here yet the problem remains.
    In addition what I posted above -
    1) Dumped the cookies in user/library/cookies folder
    2) Deleted the apple cookies found under Safari Preferences "Show Cookies"
    3) Repaired disk permissions
    4) Deleted iTunes Library Genius.itdb file
    5) Reinstalled iTunes (with the new 10.1 version)
    6) Restarted computer
    7) Rebuilt iTunes Library folder http://support.apple.com/kb/ht1451
    8) Deleted all iTunes dead tracks
    http://dougscripts.com/itunes/scripts/ss.php?sp=removedeadsuper
    9) Increased internet access speed
    10) Removed all open "[" and '}' brackets from songs, albums & artists
    10) Rebuilt my entire library from scratch!
    Is there anyone out there with over 200K songs that can update their Genius? One thing I noted is the genuis.itdb file is just over 2GB. I'm wondering if there is a maximum size on this based on the error I'm getting. Any thought or know info on this?
    Ok, think I may have found something here with this. I backed out all the music added prior to this problem occurring and ran the Genius update. All worked fine. I then started adding the music back little by little (running the update each time) until the problem returned. When the problem came back I ruled out the specific music added by backing that bit out, verified all was ok and added a different batch back in.
    Bottom-line it appears that when my library exceeds exactly 1.208TB the problem appears. Interestingly enough it does not appear to be related to the number of songs, the size of the genius.itdb file (in fact when it was working the file was at 2.25GB - larger than what I reported before). It specifically seems to be related to the size of the overall library - when I have it for example at 1.2079 all is ok, 1.2081 it fails with this error.
    I did try moving the library and related files to the external drive but same result. abavetta, I think your suggestion of this script may be a workaround for now - although from what I read, is this not the same that you can do anyway with iTunes by holding the alt/option key open start up? In fact I do have two libraries now - one with the 2TB drive which I use at home and another for 2x500GB disks I carry with me when i travel. I just reported the same back to Apple but doubt if any immediate solution will come for this. Too bad as one of the great things about having such a large library is the mixes you can generate via Genius. Anyway, such is life and will just live with this for now. I also just found this program called Tangerine! http://www.potionfactory.com/tangerine/ which creates playlists like Genius - although through a different technique I might also take a look at.

    Just to let all know that may be having a similar problem, what I found by accident to fix this problem.
    Reset all my Home Folder permissions using the resetpassword method from the startup utility in Lion.  Then turned off/on to reset Genius and cleaned out the cache folder for good measure.  Finally after more than a year without, have Genius up and running again.

  • HH5 - OPenRG reboots - new file download

    Having apparently got into a relatively benign pattern of a single OpenRG reboot on my HH5 every two weeks (pretty much to the minute) I see I had three in the early hours of this morning - at 01:28, then almost exactly an hour later, and then almost exactly three hours after that. And during the course of these, a new file was downloaded: filename 5a.1.10-bundle5app etc. Downloaded but apparently not installed.
    Whether that means new firmware will be automatically installed tonight - jumping straight from version 1.6 to 1.10 - remains to be seen. (A dummy version 1.7 was downloaded in January but never installed.) Or maybe this is another test of something or other.
    The relative regularity of these OpenRG reboots does seem to make it clear that these aren't spontaneous reactions to a sudden deterioration in line conditions or similar.
    p

    Same here just happened about 20 mins ago noticed the dreaded open RG back again ?
    08:13:01, 01 Apr. (259796.470000) PPP LCP Send Termination Request [User request]
    08:12:59, 01 Apr. (259794.590000) The system is going DOWN for reboot.
    08:12:59, 01 Apr. (259794.590000) OpenRG is going for reboot by IPC command
    08:12:54, 01 Apr. (259789.590000) OpenRG will go down for reboot in 5 seconds
    08:10:54, 01 Apr. IN: BLOCK [16] Remote administration (UDP 184.105.139.67:52448-​>86.146.159.66:161 on ppp3)
    08:06:20, 01 Apr. (259395.880000) CWMP: session completed successfully
    08:06:20, 01 Apr. (259395.660000) CWMP: HTTP authentication success from https://pbthdm.bt.mo
    08:06:18, 01 Apr. (259393.380000) CWMP: Server URL: https://pbthdm.bt.mo; Connecting as user: ACS username
    08:06:18, 01 Apr. (259393.380000) CWMP: Session start now. Event code(s): '4 VALUE CHANGE'
    08:06:17, 01 Apr. (259393.090000) CWMP: Initializing transaction for event code 4 VALUE CHANGE
    08:03:53, 01 Apr. (259248.730000) CWMP: session completed successfully
    08:03:51, 01 Apr. (259246.640000) CWMP: HTTP authentication success from https://pbthdm.bt.mo
    08:03:48, 01 Apr. (259244.160000) CWMP: Server URL: https://pbthdm.bt.mo; Connecting as user: ACS username
    08:03:48, 01 Apr. (259244.160000) CWMP: Session start now. Event code(s): '7 TRANSFER COMPLETE,M Download,4 VALUE CHANGE'
    08:03:48, 01 Apr. (259243.930000) CWMP: session completed successfully
    08:03:47, 01 Apr. (259243.020000) CWMP: Initializing transaction for event code M Download
    08:03:47, 01 Apr. (259243.020000) transfer completed successfully
    08:03:47, 01 Apr. (259242.840000) CWMP: HTTP authentication success from https://pbthdm.bt.mo
    08:03:44, 01 Apr. (259240.180000) CWMP: Server URL: https://pbthdm.bt.mo; Connecting as user: ACS username
    08:03:44, 01 Apr. (259240.180000) CWMP: Session start now. Event code(s): '6 CONNECTION REQUEST,4 VALUE CHANGE'
    08:03:44, 01 Apr. (259239.960000) CWMP: session completed successfully
    08:03:44, 01 Apr. (259239.690000) CWMP: Download file, FileType=4, FileName=5a-​1.10-​bundle5app-​package.tar.gz.aes.rsa.signed, Username=, CommandKey=1484787236
    08:03:43, 01 Apr. (259238.590000) CWMP: HTTP authentication success from https://pbthdm.bt.mo
    08:03:41, 01 Apr. (259236.650000) CWMP: Initializing transaction for event code 6 CONNECTION REQUEST
    08:03:41, 01 Apr. (259236.630000) CWMP: Initializing transaction for event code 6 CONNECTION REQUEST
    08:03:41, 01 Apr. (259236.620000) CWMP: Server URL: https://pbthdm.bt.mo; Connecting as user: ACS username
    08:03:41, 01 Apr. (259236.620000) CWMP: Session start now. Event code(s): '6 CONNECTION REQUEST,4 VALUE CHANGE'
    08:03:41, 01 Apr. (259236.400000) CWMP: Initializing transaction for event code 6 CONNECTION REQUEST
    08:03:38, 01 Apr. (259233.980000) CWMP: session completed successfully
    08:03:38, 01 Apr. (259233.770000) CWMP: HTTP authentication success from https://pbthdm.bt.mo
    08:03:35, 01 Apr. (259230.750000) CWMP: Server URL: https://pbthdm.bt.mo; Connecting as user: ACS username
    08:03:35, 01 Apr. (259230.750000) CWMP: Session start now. Event code(s): '2 PERIODIC,4 VALUE CHANGE'
    08:03:35, 01 Apr. (259230.530000) CWMP: Initializing transaction for event code 2 PERIODIC

  • IMPORTANT GUIDE FOR ANYONE WITH AN HP DEVICE NOT WORKING AFTER SNOW LEOPARD

    To anyone with an HP printer/scanner device,
    After being frustrated with my HP Photosmart C4580 not being able to scan for over an hour (scouring the forums, HP's website etc), I've come to realize my problem. Note that this has only been tested on a device that is plugged in DIRECTLY to your mac. I have not tried this over the network and do not plan to since my house is not set up for that.
    Anyone who is having any issues with their device, UNINSTALL the HP software. The software is simply incompatible with SL and will mess up your devices! HP even says so on their website (see link below)!
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01846935&cc=us&lc=en&dlc=en &product=1153481
    This is easily done by going to your applications folder > Hewlett Packard > HP Uninstaller. After using the uninstaller to uninstall HP's apps from your computer unplug your scanner from your computer and power supply. Now to make sure there are NO printers registered with your computer that could possibly mess up the fresh driver install, go to System Preferences > Print & Fax. Right click anywhere in the left pane (where any printers you have/had installed will be located) and click "Reset Printing System". This will wipe out any traces of a printer so you can start a-new.
    Now, restart your computer. After it is restarted, plug your printer into the power source, then when it is fully booted up you may plug it into your USB slot. Then, go to System Preferences > Print & Fax. Click on the "+" (which will give you the interface to add your printer), select your printer (which you should note will say "USB Multifunction" instead of "USB" which is what showed up with the HP software still installed), and click "add". Your mac will do the rest (installing the drivers and such) and you should be able to print & scan as usual.
    Note that you will need to scan using Preview, Image Capture, or your Printer Queue due to the changes with Snow Leopard (see the HP link above to learn how to use these). Your device should now properly show up when you use these applications to try and scan now.
    -Mike S

    @lakewood - there is nothing specifically in Software Update if you upgrade from Leopard to Snow Leopard. For me anyway..seems like thats the case for everyone though.
    @ruger - so it won't even let you hit the '+'? For me, I had to hit the '+' to get it to install which in turn automatically downloaded the proper software/drivers for my device. if i were you, i'd see if i could get that to happen and hit '+' to install it. also - make sure you don't have any of the HP software on your computer also (use the uninstaller provided!)..that was really what did the trick for my machine. HP has come out and specifically said to not use the device manager, but that didn't quite do it for me. i had to uninstall everything that came on that CD (its all located in applications > Hewlett-Packard and, like i said, can be uninstalled easily using the provided uninstaller).
    if all else fails, what i've also heard helps is just to reinstall snow leopard. that'll make sure everything is fresh. i'd delete all your printers like i outlined in my first post first THEN reinstalling it if you wish to go that route. however, it really does sound like the driver is messed up if its pausing and works fine with time capsule. idk how old the printer is, but sometimes with older models, the support blows. i apologize if none of this helps whatever the reason for your troubles may be, though.
    Good luck,
    -Mike S
    PS: printers are always terrible to upgrade on everyone's end. consumers, operating systems, and manufacturers. it stinks that nothing can be generic and run similarly anymore =/

  • For anyone with newer imac fan issues.

    I posted about a week ago asking for advice on my fan issue.
    I was getting istat readings of 2500 - 3000 - 3500 (max has been 3850) rpms from nothing more than being on the internet. The computer is 2 months old and prior to having the computer worked on for an unrelated issue I had never once heard the fans kick on.
    But now my computer sounds like an airplane trying to take off - all the time.
    So, with another visit to the apple store, support-line calls and a visit to an outside apple authorized service provider - I am here to tell anyone in the same boat, that having your fans blow LOUDLY, and ALL the time is perfectly "within spec."
    I'm using it right now. Only safari is open and it sounds like monsoon season with a nice consistent rpm of 2700.
    I am certainly frustrated but did want to share this follow up with anyone that's discouraged with their fans since I know when I first ran into the issue I scoured the forums for info.
    Are they loud - you betcha!
    Are they annoying - **** right!
    Do they interfere with music and video - oh boy do they!
    Does it sound like they computer is deathly ill - absolutely!
    Is it all 'within spec' - yes, sadly it is.
    I don't see anything else I can do at this point.

    @den.thed
    I actually have that app. already. Its where Ive been getting all my crazy fan readings from.
    The temp sensors I havent paid attention to though - which are the temp. sensors and what is abnormal?
    Last time I took the computer into the mac genius(the 3rd time) - they just told me everything was fine and didnt even look at it! Then I was told by Apple Support to go to an outside service provider who also said there wasnt a problem. I had 50 screenshots of the fan at 3000+ speeds and they didnt seem concerned.
    Overall I guess what im getting at is - even if it appears that there's a problem I dont even know what I can say to these people anymore!!! No matter what I say, Im told that the computer is fine. Its by far the most frustrating product/purchase problem Ive ever dealt with.
    thanks for help so far though.
    Anyone know how much I can recoup by parting the thing out?

  • A suggestion for anyone with discoloration on the rist area!

    I just want to let people know the Marware MacBook protection package is great for the wrist area of your MacBook.
    I had my cover replaced for discoloration 3 times and that was one to many times!
    So...
    I was in the Apple store today and I saw the Marware wrist cover and decided to buy it. It's the best product that I have boughten for my MacBook. It feels great to know that I am not going to have to worry about discoloration ever again!!
    I recommend this to anyone, not only does it protect your case of your MacBook but it also provides comfort!
    Here's the link if you wanna check it out:
    http://www.marware.com/cgi-bin/WebObjects/Marware.woa/3/wa/selectedCategory?cata logCatID=224&wosid=UiEJWBwXATKaAX5cXTO1S0
    It's only $19.95
    It's awesome and if you are getting a MacBook for someone this Christmas then I also suggest this cover for there MacBook. They sell these at Apple stores.
    Just thought I would give me insight on this awesome product and sorry if I upset anyone for this post, I just had to let people know about this cover.
    Merry Christmas!
    Sam
    Macbook   Mac OS X (10.4.8)   MacBook
    Macbook   Mac OS X (10.4.8)   MacBook

    Thanks for the reply.
    Have tried repairing via pcc, also done a factory reset, disabled some apps and cleared the cache on a few other apps.
    Also, tried using different browsers like opera, dolphin and all not being able to play flash properly mainly on youtube.
    The only time a youtube vid played properly through the desktop site was when I set the quality of the video to the lowest possible (something like 350p) ?

  • Looking for anyone with the Belkin Auto Kit for iPod...

    I am having trouble with this auto adapter in that when I play throough the audio jack on the charger, I get skipping/clipping of my music. If I plug directly into my in dash unit and bypass the audio of the Belkin unit, it plays fine. I have already exchanged the Belkin unit once...
    Anyone else experience this?

    returned second Belkin unit and went with a different brand - No Problems!

  • Does appstore work for anyone with an IOS product at the moment?

    I wanted to download an app.. so i opened app store to download. i click o the download button, but it says
    "Can not connect to itunes store"....I tried in My iPad, no luck.. Tried With iPhone 4s no luck there aswell.. Live in Sweden btw. Does Anyone know What the problem is all about?

    We are all itunes users just like you.
    You are not addressing Apple here at all.
    Click Contact Us at the bottom of this page.

  • For anyone with speck hard case

    Hi,
    If you have this case can you tell me whether it lets the MBP open fully or is it only possible to open the laptop to 90 degrees.
    I am referring to the speck case here :
    http://www.speckproducts.com/products/seethru/macbook-pro-15/25
    Thanks !

    I saw in some Apple document that the lid is supposed to open to about 130 degrees. I believe they included this info for users familiar with older (black) G3 PowerBooks that opened to 180 degrees.

  • Do the SB X-FI cards work for anyone with Vista

    I have one on the way and would like to know if I should return it and wait for a card that will work. My audigy 2 zs just wont make it. It seems I am hearing a lot of unhappy folks who have bought these cards. please advise.

    Since this thread is hot right now maybe one of you can help me out with something that is slightly related. I just noticed this thread:http://forums.creative.com/creativel...essage.id=9273any of you have any experience with these "You-Pax" drivers? If so, do you know of any better download locations? This is not something I have to have, as I am happy with the current state of my X-FI functionality, but these modded drivers have me very curious.

  • For Anyone with a Z87M-G43 motherboard

    I have a Z87M-G43 motherboard which works fine but from day one it does not beep when it POSTs. It does POST remarkably fast so I just wanted to know if other users with this motherboard have experienced the same thing, or if their motherboard does indeed emit beep codes. I have tried connecting several different speakers to the 4 pin speaker connector and have tried switching the positive and negative wires but it has not made a difference - no beeps. If your Z87M-G43 boards are beeping, then I guess I just have a bad speaker connector on my board. Thanks.

    Pirate Dog,
    Thanks for taking the time to reply. You were absolutely correct! I removed the memory sticks, powered on and got a repeated beeping. Put them back in and booted successfully with no beeps at all. It's good to know that everything on the motherboard is OK and will beep if anything does go wrong. I wish the manual had a little note about this "silent" posting feature. Thanks again.
    Jeffk

  • When I try to send an email I get the message rejected by the server because it does not allow relaying.  I have sent mails for months with no problems. Can anyone help

    When I try to send an email I get the message rejected by the server because it does not allow relaying.  I have sent mails for months with no problems but has started to be recoccuring. Can anyone help please as its pointless having email on my phone otherwise :-(  as i have to wait till i log on at home to respond.
    thanks
    Alison

    https://discussions.apple.com/message/16832350#16832350  follow the link user was having same problem.  Solution was given.

  • Anyone get a huge "Problem Report for iDVD" with hundreds of lines of information?

    Anyone get a huge "Problem Report for iDVD" with hundreds of lines of information? This happens right before the DVD would be finished burning but instead crashes and leaves the long report your have to scroll down several times to read. I had to take several screen captures of the screen to get the WHOLE report. Here is two:
    (If there is another thread on this - just answer the question or refer me to it. I'm past due on a big project. Don't have time to read all 21,000 discussions in the iDVD thread. Be kind. Thanks )

    Some things to try first:
    1. Disconnect any and all 3rd party devices that didn't ship with your mac directly from apple (both FW and USB included). 
    2. Restart your mac without any 3rd party devices attached whatsoever. That includes ext. hard drives, blue tooth devices, and any third party memory product/s. Basically, anything that doesn't come directly from apple has to go (at least while troubleshooting).
    3. Need you to dispose of the plist for iDvd also. Go to you Home folder, the one that looks like a house > Library > Preferences > com.apple.iDvd.plist and drag and drop this file/s to the trash. Make sure to first quit iDvd prior to disposing of this pref. file/s.
    4. Run apple's disc utility and repair permissions. Applicantions > Utilities > Disc Utility > Repair Permissions.
    5. Restart your mac yet again, and try iDvd one more time.
    6. If it's still at issue then please open iDvd from a separate user account and try your project one more time. If you don't know how to create a separate user account then just come on back and one of will show you how.
    Good luck.
    Message was edited by: SDMacuser

  • On iOS 8.3 using 'Keynote for iPad' the app freezes repeatedly (since the last update of April 21st) while editing slides. 30 sec. later comes alive again, then freezes again after a few editing actions. Anyone with the same problem?

    On iOS 8.3 using 'Keynote for iPad' the app freezes repeatedly (since the last update of April 21st) while editing slides. 30 sec. later comes alive again, then freezes again after a few editing actions. Anyone with the same problem?  I tried everything 'app support' tells me except deleting and reinstalling the App because I have a lot of files that I'd lose.  Recommendations anyone?  [email protected]

    On iOS 8.3 using 'Keynote for iPad' the app freezes repeatedly (since the last update of April 21st) while editing slides. 30 sec. later comes alive again, then freezes again after a few editing actions. Anyone with the same problem?  I tried everything 'app support' tells me except deleting and reinstalling the App because I have a lot of files that I'd lose.  Recommendations anyone?  [email protected]

  • For Anyone who has Blackberry Connect WITH OTA Con...

    I've tried with an E61i, E90, and now E51, all with the latest firmware and latest Blackberry Connect software, and nothing I do on the device allows me to be able to do OTA sync of our corporate Exchange, (Outlook), Contacts. I only have the standard 3 options for sync in my Blackberry Connect client on my phone, Email Settings, Email Filters, and Calendar.
    For anyone who has this working, can you confirm whether or not there is a BES server side setting that must be enabled to allow this OTA Contact sync, and what it is? If this is the case I'm not sure our corporate BES admin will go for it, but I can at least stop pulling my hair out on the client side..
    Thanks,
    Jason

    Hi Rod,
    Thanks for the link. I did went there and had a look.
    First, as the article pointed out, there is a difference between Mac users and PC users. Mac users are Mac FANs, PC user are mostly just PC users. So if I look at the numbers, the number for Macs is less objective to me.
    Second, the data was collected on pre-Intel units, especially iBooks, which has been around how many years? more than 5 I believe, correct me if I am wrong. Any product having that kind of life span should have a nearly perfect quality. Apple just simply had much more time to correct defect than other PC manufaturers, so no mistery here.
    Third, Apple charges a premium price for its products, so it shoule choose the coponent vendors carefully and it owns its customers/fans a solid system. On the other hand, the other PC vendors are constantly going through fierce competition to lower their price, so it is inevitable to have some component vendors providing crapy parts, such as some LCD screens and keyboards from Dell.
    Finally, lets look at MB and MBP, if they are as good as old Macs, then we should see similar amount of people complaining about MB and MBP as iBook and similar, but is it the case?
    I very much want to be a member of the Mac world, especially now it uses one chip I worked on, but my shopping and reading experience told me otherwise - the MacBook is not ready, we need time to see if it lives up to the Apple name and it would be interesting what the next report from PC Magzine will look like...
    Being a PC user almost all my life till now, want to join the Mac club, but Apple is making it supper hard for me. Is it really too much to ask for a working new MacBook upon arrival?!

Maybe you are looking for