For around 4 week all numbers that call my phone show up as 'unknown'. Help.
For around 4 weeks everyone that calls me, including my contacts, every call shows up as 'unknow' I really don't like to answer every call. I called EE about 2 weeks ago and they said they know of this issue and are working on it, but for 4 weeks? they don't update you or let you know they're working on it, I don't know if this is really a known issue or if EE of trying to just get rid of me on the call.
Hi ,
Thanks for joining the Community.
This problem is still under investigation and we hope to have a fix put in place very soon.
I will let you know as soon as I get any further updates.
Thanks for your patience.
James
Similar Messages
-
I had a case that I drop little juice over my macbook air, I dried it immediately and it keep working fine, as this happen while I am traveling I kept working on it for around two week, it was working fine except that the few key became sticky.
When I back to Jordan I sent it to the authorized support center “ Multivision” in Amman and asked them to help in cleaning the keyboard as it still sticky and I explained to them that the issue and I clarified that all are working fine.
For a two days they didn’t back to me and they answered that they are still checking it, and then after they just called me saying that my macbook is damaged and not working and its better for me to buy a new one!!!
They say that the liquid damaged the main board! I explained to them that this can’t be as it was working fine when I delivered it to them and I didn’t ask them to open it I told them to help in cleaning the keyboard!
I am complaining about this support behavior and they were not cooperative nether polite in communicating.
I am not convinced that the liquid damaged my macbook and I think that the staff at “Multivision” are not qualified and did something wrong to damage my macbook!
I need you help to investigate this issue and have a feedback.Get the new keyboard at eBay and replace by yourself may be cheaper way, though you're required higher skill and well know about MacBook Air.
http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2050601.m570.l1313.TR0.TRC0.H0 .Xmacbook+air+2011+keyboard&_nkw=macbook+air+2011+keyboard&_sacat=0
https://www.youtube.com/watch?v=gLbasVD69xo -
i need to know if i can block a number from calling my phone and hoping that there is a app out there some where that can do this if not will some one make one please i dont want to have to change my number...
is there an app for iphone 4 that can block numbers from calling my phone so i dont have to change my number???is there an app for iphone 4 that can block numbers from calling my phone so i dont have to change my number???
Of course not. Number blocking must be done by your wireless provider. -
Blocking all numbers that start with +23
Hello,
I have a big problem, because someone from Nigeria is calling me all the time (i dont know where did they get tnis number!!!). I tried to bock their numbers, but whenever I do that, they just change the number and call again. I think I have bloked over 100 numbers, but they keep calling!
Is there any possiblity to block all numbers that starts with +23?
TnxHi,
You will not be able to do this.
If the material number is fully numeric you can only have leading zeros On or OFF, you cannot store a material number with differeing leading zeros.
If this was a new implementation you could have set the "lexicographical" flag on the material master controls and you could then have whatever leading zeros you wanted, but this flag can ONLY be set BEFORE you add your first material and so you no longer have the option.
If you really MUST have this option then define an external number range for alpha characters and use an alpha character on the end of the number, so for 00456 you would have to create 00456a and train your users to ignore the "a". This is a really bad solution but you have no option of having variable numbers of leading zeros.
Sorry
Steve B -
my ipad 4 has been connected to my wireless network using a netgear sky broadband router succesfully for a few weeks, suddenly can't connect, network is showing but no signal - all other wireless gadgets are connected just fine - including iphone - any ideas?
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
I am no musician, but have owned an iMac now for around four years. During that time I have had Garageband installed. I have dipped in and out very occasionally as I would like nothing more than to be able to get my head around it just for my own amusement really. I would at least like to be able to record my electric guitar with loops and tracks etc, just try to be a bit creative and see what comes out. The problem that I have is that perhaps its me, but every time I try to get to grips with this software, I just can't seem to get my head around it, even to begin to do something. I have now recently downloaded 10.0.2 which is confusing in itself, as, as far as I can ascertain that is actually version 11, but I'm not even sure about that. I have also recently purchased a Rocksmith RealTone Cable to connect my guitar. I can sometimes get a sound come out, but nothing to brilliant. And every time I try to set something up, it just doesn't seem to work out. I end up hitting buttons and controls in the simple hope that I may hit the correct control in order to get some sort of result. But I'm kind of fumbling in the dark with this. I have trawled the Internet just trying to find either a good manual or video tutorials for absolute beginners, but there just simply doesn't seem to be anything of that nature out there and what there is appears always to be very sketchy and not particularly detailed in explaining anything properly, and so I always find myself seemingly jumping in with both feet and just struggling to try and find a foothold with this on how to really begin. It is so frustrating as I can see the fantastic potential of this software, but just can't understand how to use it properly. If there is anyone out there who may be able to offer me some advice with this, I would be most grateful indeed... Many Thanks.
I have now recently downloaded 10.0.2 which is confusing in itself, as, as far as I can ascertain that is actually version 11, but I'm not even sure about that.
Version 10.0.2 is the newest version and the successor to GarageBand '11 (version 6.0.5).
The '11 is referring to the iLife '11 suit of multimedia application - the older GarageBand was a part of this bundle.
Have a look at Edgar's graphical enhanced manuals, the explain very detailed how things work and why. You can buy them as iBooks from the iBook store or directly from the page:
http://DingDingMusic.com/Manuals/ -
I click on one song and another one starts playing. Cover art for one artist shows up on another album. All of my music isn't showing up. Please help. Why is this happening? How can I fix it?
Sorry for not getting back with you...
That moves only the iTunes media, not the iTunes library (which is really kinda nebulous).
iTunes library = iTunes folder and all the media, wherever it is located.
The /Music/iTunes/ folder contains the iTunes library.itl file, which keeps track of everything in iTunes.
I do however still have the original MAIN startup drive still in the computer, it's just not the startup.
This is good you still have it.
Try this...
Hold Option and launch iTunes.
Select Choose library... and select the /iTunes/ folder on the original drive. It should be in /Users/your_user_name/Music/.
Don't mess with anything. We can get it cleared up.
Does everything work okay? -
I have a few wedding projects(1-2 hours)I am trying to export at full hd quality,than burn in idvd. After rendering for 8hrs I receive error code that states "file is too big". Please help? compressing tips without losing quality? or any other exporting alternatives?
Hey Z,
Thank you for the tip on exporting by media browser (large) from imovie. But of course, if it's not one thing it's another. Now that I figured how to export a large file from imovie, I have an idvd issue. I followed the instructions for burning from idvd and changing the encoding to professional quality and the burn speed to x4, but I am receiving an error that states the following,
Your project exceeds the maximum content duration. To burn your DVD, change the encoder setting in the Project Info window.
Project:
- total project duration: 79:04 minutes
- total project capacity: 4.327 GB (max. available: 4.172 GB)
Menus:
- number of menus in project: 1 menus
- total menu duration: 0:39 minutes
- total menu capacity: 37.370 MB
Movies:
- total movies duration: 78:25 minutes
- total movies capacity: 4.291 GB
I have searched in the idvd forum for similar issues and I am stumped at this point. I have tried deleting the encoding assets and re launching idvd with the changed preferences, and still the same error. I know you mentioned something about free hard drive space available, and I have very little left. 4GB to be exact due to massive hours of non-edited footage. I am not sure if this is why, but I do not recall ever needing free space to burn memory onto a separate dvd. I would be more than happy if I am wrong, and it would be a quick fix. Otherwise, the technical nightmare continues. It's all a learning process and your expertise is greatly appreciated! Thanks in advance. -
evidence of a freakin' rootkit (of sorts) haunting my remaining neurons for the last year @ all my android devices (including this new tablet).
PLEASE HELP ME
Jose Carlos Amaral Morgado
Tomar, Portugal
'''...personally identifying information removed'''Sorry Morgado. This is a Firefox for Android support forum. Not a general purpose. Android forum. Please ask in an Android OS forum.
Locking this thread.
Cheers!
...Roland -
How come now every time i throw something into the recycle bin it asks for my password and when I do it doesn't show in my bin help please!
You're throwing away files that either don't belong to you or are in a folder that doesn't belong to you. Since your user account has Administrator privileges, it just ask you for authentication, else it would forbid the operation.
To better understand the concept, select one of your files from your home directory and press Control-I. In the info window, check the Sharing & Permissions section at the bottom. Do the same with one of the files that asks for the password. -
I just got iPhone 5s and after a day when I open the notifications from the top that make the phone shows the apple sign and back to unlock what can I do as I reset all settings and nothing changed ??
So after looking a bit closer i have noticed that when i have the phone plugged into the computer it shows the songs but when i dont have it plugged in and i go so the song icon on the bottom of the music menu screen it says i have no songs!
-
I have updated my iphone with the current software but it is showing you need to connect to of itunes to activate your phone, when i did that it is continuously showing an error.please help me to get through.
Kindly Activate my phone.Rajan Gupta wrote:
...it is continuously showing an error.
See here > http://support.apple.com/kb/TS3424
Also see this discussion.
https://discussions.apple.com/message/21189708 -
Foxtel on Tbox channel stuck on cancelling for around 2 weeks now
I tried to cancel the sports channels around 2 weeks ago or so now, and it still says 'cancelling'. I added entertainment and that went through almost straight away, both requests were done within a minute of each other so not sure why the cancelling part is taking so long? I don't want to be paying for a part of the subscription that I'm not using and haven't used in a long time, which is why I tried to cancel it. haha. Any idea if this is an issue that's going to be resolved soon?
Hi wibble, I hope it's sorted out for you soon - while we're not able to request or provide account details via posts on these forums, our teams on 13 22 00 or through the online chat service at https://livechat.telstra.com/TCOM:Facebook:Consumer can help follow up on the disconnection order.
-
start ifind from web on my dell pc with win 7. get error on load to retry later or reload. click reload and icloud main screen comes up. I hit ifind and phone shows up on a misaligned map and is shown several blocks from actual location. tried daughters phone and map shows up inaccurate for hers also. I have 4s she has 5c all ios on phones are updated . I can get phone to sound and access data such as contacts, calendars. the problem with bad map and message that there is a problem on starting. previously the map had no problems and location was accurate to within a short distance.
Thank you for the sympathy and the information about the Adobe.com forum Michael.
I posted here because, to be honest, for a company that's acknowledged their installers and updaters and support needs some work, they seem very determined to obfuscate the means by which users can provide direct feedback to the company. Much like you, I've also noticed a trend in CS5 installations that mirrors the issues that were present in CS4. it's a sad state of affairs.
As for my installation, you are also quite right to say that a clean install would have been a lot faster than what I went through with TS and it was actually my first idea. Before calling TS I'd actually read through the forums and noticed that a large number of users who were faced with my situation had no other choice but to reformat. I was just giving Adobe the benefit of the doubt and wasted 2 and a half weeks through that course of action...
What makes this situation even more frustrating is that the installer failed on a fresh system. It was a custom-built design machine, assembled and configured by myself. The only software that had been installed on it prior to Design Premium was Firefox, an FTP client and the start of my problems, trial versions of various CS4 programs. I used trials just long enough to retire the previous design computer so that I wouldn't contravene the EULA's stipulation of not running more than one instance of software at the same time on different machines. Turns out being honest once again penalised a legal customer.
If there is just thing users should learn from my far from unique tale of failed tech support it's that if you ever run into a problem with the installation, don't bother calling TS, just reformat and start from scratch. It might seem like it'll take longer to get going again, but in actuality, it's the opposite. Reformatting means you'll be up and running in about 1 or 2 days rather than 2 weeks.
Marc -
i am in india iam using i phone 5 whenever i insert a sim card it works properly but after 10 or30 or maximum after one hour phone shows no sim or invalid sim.i have changed sim on /off phone but nothing is happening please help me
That's going to be a ridiculous waste of money and energy.
First of all, the current ATI drivers don't support multiple GPUs, so at the moment even a single 4870X2 would be only a 'normal' 4870 (which is quite a speed beast already). GFX drivers evolve rapidly, so things might look different next month, but when it comes to Linux and hardware there's one Golden Rule: stay away from the newest stuff and wait for proper support to get coded.
I also wonder what power supply could possibly cope with the differences between idle and full load; that's way beyond 400W. But then, I'm one of those "quiet&green" types where >100W idle is already a bit much.
I kind of understand that you want to get it done and not worry about hardware for the next 10 years or so, but that's simply not how the hardware world works and never did. At least not for the average consumer.
Maybe you are looking for
-
Issues with Catalogs in Organiser when photos on hard disk other than C:
Hello Folks; I face the following issue with PSE7 : the Catalog function does not work when I try to import pictures located on any other hard disk different from C: disk. In other words, the following happens : 1) in the Organiser, I create a new Ca
-
Link in emails to open the link in new tab, not a new firefox window with home page,
Link in emails open a new Firefox window with my default home page. How do I get Firefox to open the linked web page, in an new tab, as it used to do?? This is for Win XP, FF 17.0.1, using Outlook as mail client.
-
Reg : Top-of-page in classical report.
Hello all, This is regarding the page count that needs to be written in top-of-page event depending on the data in the internal table. I have internal table with feqw fields for example : Field 1----- Field2 Val1---- text1 Val1---- text2 Val1----
-
Stop error message on LOV during page refresh
I have a date field on my apex page with validation. A user enters an invalid date and clicks a button to populate a couple LOV's. The source of the LOV's are dependent on the value of the Date field. If the Date field is invalid, my validations fire
-
hey there. I have a strange issue going on with my Photoshop CS2. When I open the program and begin to work with my image the program closes without any warning. I have never had any issues before and have done high quality graphics before with it. M