For Connect MS-Access to SAP - XI System , what Driver is required?

Hi all ,
There is a requirement to connect Microsoft ACCESS Database from SAP XI System. To achieve such scenario first basis needs to deploy the required vendors Database Driver on SAP XI System.
So Please tell me what drivers need to deply for Microsoft ACCESS DB Drivers on XI System , to achieve such scenario.
I am following a document whose name is How To Configure External Drivers for the JDBC & JMS Adapters.
MY PI System is PI 7.0 and on Windows Server 2003 standard x64 Edition.
MS-ACCESS is on normal PC with XP on it
Regards
PS

Hi,
What’s the error message you got? It seems that you haven’t install the correct driver for access the .xlsx file. Please download and install 2007 Office System Driver: Data Connectivity Components from below link to check the issue again:
http://www.microsoft.com/download/en/confirmation.aspx?id=23734
Besides, to change a .xlsx file to .xls file, we should open the .xlsx file, then click ‘Save As’ button under File pane, and then select the appropriate location and ‘Excel 97-2003 Woekbook(*.xls)’ as type for the file. Then we directly use the new .xls
file as the source in SSIS.
Reference:
https://social.msdn.microsoft.com/Forums/en-US/1d5c04c7-157f-4955-a14b-41d912d50a64/how-to-fix-error-the-microsoftaceoledb120-provider-is-not-registered-on-the-local-machine?forum=vstsdb
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Similar Messages

Regarding access key for modify predifined fm in SAP IDES System

hai to all,
How can i find
access key for modify predifined fm in SAP IDES System
i have sap 4.7 dump(IDES)
please give reply asap.
thanks in advance,
regards,
surya.

Hi Chandran,
Thank you for the reply,
how can i access this site, its asking username password,
i didn't have both of these and even i'm unable to register also.
how can i access.
please respond
regards,
surya.

Issue in creating Credit Note for road carrier invoice from SAP TM system

Dear All,
I am facing issue in creating Credit Note for road carrier invoice from SAP TM system.
The following steps I have performed:
1)
1)    1) Create Freight order with Amount 20,100
2)     2) Create Freight Settlement Doc and send it to ECC. Hence PO and SES will be created in ECC with Amount 20,100
3)     3) Invoice verification (MIRO) done w.r.t. FO in ECC with Amount 20,100 and following entries posted :
Carrier A/c - 20,100Cr
GR/IR A/c – 20,100 Dr
4)    4) Created Credit Note in SAP TM against freight order with Amount 1,010 and transfer it to SAP ECC.
5)    5) By this a new PO and SES was created with negative values (with amount 1,010) in SAP ECC
6)    6) In transaction MIRO, Credit Memo was created against the freight order.
7)    7) By this it is showing value 21,110 by adding the line items of Original Purchase Order and Credit Note Purchase Order as 20,100 and 1,010 respectively.
8)    8) By posting this following are the accounting entries which is not correct:
Carrier A/c – 21,110 Dr
GR/IR – 20,100 Cr
GR/IR – 1,010 Cr
9)    9) In report FBL1N which is showing the remaining liability of value 1,010(21,100 – 20,100) instead of 19,090 (20,100-1,010=19,090) for the carrier.
Please suggest how to resolve the issue and get the correct accounting for credit memo?
Regards,
Vibhu Gupta

Hello,
Like my reply in Linkedin group, I got the same issue and solved with BADI in TM side(REQREQ...).
Regards, Marcelo Lauria

Set up for Extraction the data from SAP ECC system

Hi!
I would like to analyze the transaction and master data from SAP ECC system into SAP BI system.
I have created the connection (entry for SAP ECC system) within SAP NetWeaver System.
Unfortunately when I try to load the transaction data for Info source the process does not end successfully.
There are no information within SM58 on source system.
The ST22 does not contain some suitable information.
Question:
Which settings do I miss and how can solve my problem?
(user authorization, etc.)
Thank you very much!
regards
Holger

Hi!
many thanks for your reply.
The error I get:
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source
Can you please help me to identify the error?
Thank you!

SAP GRC 10 - PSS Access from SAP ECC System

I have configured Password Self Service in GRC System and is working perfectly fine for all password resets if access provided to NWBC from GRC System.
We have requirement to provide end users to reset password using SAP ECC System only. I have tried to access NWBC using SAP ECC System but is giving me error that Menu not configured or roles not assigned.
Currently Maintain Data Sources is configured as below
User Search Data Sources , User Detail Data Sources & User Authentication Data Sources set to ECC Connector and End User Vertification Set to yes.We are not using LDAP / Active Directory for the User Search Database and instead ECC Only
Can anyone provide the roles to be assigned in SAP ECC System to access NWBC - Password Reset .

Hi Anil,
In support to Colleen's comments, It seems that you have not configured the USER on the End User Services. You need to make sure that the guest user (not available in GRC) is configured in each of the 10 services in SICF for the end user Login Pages to work.
Here are the 10 required services to be activated:
1.)GRAC_OIF_MY_PROFILE_EU
2.)GRAC_GAF_NAME_CHANGE_SERV_EU
3.)GRAC_POWL_REQUEST_STATUS_EU
4.)GRAC_GAF_PWD_SELFSERVICE_EU
5.)GRAC_OIF_USER_REGISTER_EU
6.)GRAC_GAF_ACCREQ_WITH_REQREF_EU
7.)GRAC_OIF_REQUEST_SUBMISSION_EU
8.)GRAC_GAF_ACCREQ_WITH_TEMPL_EU
9.)GRAC_GAF_ACCREQ_WITH_USEREF_EU
10.)GRAC_UIBB_END_USER_LOGIN
You can refer note#http://service.sap.com/sap/support/notes/1628387
If the user is not present in GRC system then, they have to go with end-user-logon page to reset their passwords where you can always define the user authentication configurations.
Regards,
Ameet
Message was edited by: Ameet kumar

Tracking Transports for confi/dev overwritings in sap srm system

Hi, could anyone please suggest the best way to track and identify any code/config overwritings due to any new change being transported into the client under a new transport?
in m previous organization we had a custom developed tool for identifying such potential overwritings in ecc system however for SRM system it did not work.
could anyone please suggest an automatic/manual check by which i could be able to identify if any new change will potentially overwrite any existing setting in the SRM system
Thank you

Hi Parikshit,
Please make use of Solution Manager 7.1 BPCA tool.Using this tool you may be able to identify which part of the business solution may get impacted with a new change.
This tool can work in any SAP solution including ECC, SRM , BI, CRM etc. but it requires certain pre-requisite configuration to be done in Solution Manager.
Refer SAP help for more details on BPCA
http://help.sap.com/saphelp_smehp1/helpdata/en/e7/ae57e0291149adaca93a9dcce33abb/content.htm
Wiki Link :Business Process Change Analyzer(BPCA) - Solution Manager - SCN Wiki
Hope this helps.
Regards,
Deepak Kori

Generate PI alerts for Runtime exceptions in other SAP ERP system

Hi All
We usually get alerts in PI Alert inbox.
For some specific interfaces, we will need to raise an alert to other SAP ERP system user.
Is there anyway generating this kind of exception?
Thanks
Sai
Edited by: Sai Krishna on Jun 30, 2008 3:08 PM

Hi Sai,
There are 3 ways you can do this.
1) Like VJ said "sending an Email using mail adapter from with in a BPM" Which will be a little complex and preformance wise may be slow but sounds neat .
2) Use the Work Flow WS71000002 ( AlertSendWf ) to capture and trigger a RFC or a Mail to the concern system
For this you will require the services of a Workflow guy; but this will be fast and recommended if the error are being caught in a SAP to SAP landscape
3) You can use this link to generate a group email this is what I have implemented in our landscape
http://sapdocs.info/wp-content/uploads/2009/01/alert-configuration-in-xi.pdf
Regards
Gagan
Edited by: GAGAN S. KASANA on Mar 2, 2010 5:17 PM
Edited by: GAGAN S. KASANA on Mar 2, 2010 5:17 PM

Need help for the message flow in sap xi system?

Hello All,
My requirement is some wat different............in the existing production system the message flow is 3500 per hour......... now we want to develop new scenario and the message flow will be 8500 message per hour.
Client is not giving me the system details ...like network details and i need to say that can we send 8500 messages in the existing system with out changing the process speed or data base.
also please advice the best ways to increase the performance in the sap xi system when the message flow is huge.
thanks in advace.
Thanks and Regards,
chinna

>
chinnasapxi wrote:
> Hello All,
>
> My requirement is some wat different............in the existing production system the message flow is 3500 per hour......... now we want to develop new scenario and the message flow will be 8500 message per hour.
> chinna
3500 to 8500 is not a message count tht needs to be worried about
but to be on the safer side what is the average size of a single message?
if the size is not a significant one u can go ahead

Would like to donate my ipad1 to a special needs program for the handicapped but would like to know what would be required to ensure the new owner could register as its new owner

What steps need to be followed before donating my ipad to a program for the handicapped to ensure the new owner can register and use/update the unit as its new owner?

Go to Settings>General>Resert>Erase all Content and Settings. That will wipe the iPad's contents from the device.
It is very generous of you to donate your iPad to anyone and it is especially kind of you to donate to a cause such as this. My hat is off to you!

AllFusion Erwin Data Modeler Connection to SAP NW2004s Systems

We would like to use a data modeling product that we purchased for many of our SAP NW systems. We understand that there may be some restrictions on DB direct user connections and would like to confirm the following from those that may have exposure in this area:
1. If we connection the DM product to SAP, are there any restrictions on the data that is read from the SAP DB?
2. Are we violating any SAP license agreement by using the third party tool for data modeling on our SAP NW systems (since it will require a DB connection)?
3. Any other helpful information?
Any guidance would be very much appreciated.
Thanks and best regards,
Chris

Hi Chris,
How does your DM product plan on "connecting" to the SAP applications? Most of the time, SAP applications provide Remote Function Calls (RFC) (i.e. in the programming world, methods) for programmers to call in order to push or pull data to itself. There are no restrictions here aside from the normal authorizations given to access data on the application. Although SAP discourages any direct manipulations directly to the database layer.
Regards,
John Ta

How to connect MS Access or other d/b tools to SAP R/3

Hi SAP Experts,
I got a requirement i.e by using MS Access or other database tools to take the SAP table dumps and analyze gaps or errors in the system data using business guided .
I don't know how to connect MS Access to SAP R/3 and how to connect other database tools to SAP R/3.
pls any body can explain me on this topic or inform me where i can get the corresponding documents.
This is urgent for me.
I appreciate you're help.

Hi,
For some databases (for example MSSQL, Oracle,...) you can use transaction DBCO (table DBCON) to create connection to external database. Then you can use native SQL in ABAP programs (EXEC SQL command).
Krzys

PI Integration between SAP ERP system and Cloud for Customer

Hi,
We have set up integration between Cloud for Customer tenant and our SAP ERP system via PI.
For performing initial load, when we try to activate change pointers for Message types in the SALE transaction, we don't find the MATMAS_CFS and DEBMAS_CFS in the ERP system(IDES ECC 6.0 EhP6).
CODERINT 600(SP1 &2) are installed and BC set COD_BYD_ERP_INT is activated in the system.
Could anyone let us know what are we missing here, so that we can get the message types.
Also we tried using Message type MATMAS for sending a message from ERP to Cloud for Customer. In PI message monitoring, the status shows as 'Processed successfully', however we do not find the message in Business Communication Monitoring in the Cloud system. neither do we see the Business Object created for that Material master.
Please let me know how to debug such a scenario.
Regards,
Sangeeta

Hi Vatsav,
Yes the outbound works now with the following urls with channel id as param. With the 'BusinessSystem used as the sender(COD) business system ID. Thanks for your help and the document
Customer Replication
/XISOAPAdapter/MessageServlet?channel=:<business system>:COD_SOAP_BusinessPartnerReplication_Send
Customer Address Replication
/XISOAPAdapter/MessageServlet?channel=:<business system>:COD_SOAP_BusinessPartnerAddress_Send
Customer Contact Replication
/XISOAPAdapter/MessageServlet?channel=:<business system>:COD_SOAP_BusinessParterContact_Send
Regards,
Sangeeta

Create a table and upload data in MS ACCESS from SAP ABAP programming?

Hi All,
How to create a table in MS ACCESS database and Upload SAP database table data into MS ACCESS table using ABAP programming?
Explain: My client requirement is " If he/she runs a ABAP Program, that will create a table and upload data into MS ACCESS Database table in background. "
Could you please give the solution or code? I know the program RIACCESS and I went through the SAP Note 583698.
Is this only solution for this? Or Any other possibilities?
Please give me solution.
Thanks in advance.

Hi,
It is not possible to create tables in a non SAP schema from inside SAP.
The SAP-Oracle license also does not allow you to create the table (see note 581312):
the following actions, among other things, are therefore forbidden at database level:
Creating database users
Creating database segments
Querying/changing/creating data in the database
Using ODBC or other SAP external access methods
Please refer following link,
[Ckick Here|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do]
You can also do it by LSMW,
If you are using Access 97, you can download directly into an access
database from SAP. See program RIACCESS for details. You have to establish
an RFC destination PS_ACCESS_1 and 2.
There are then a couple of function modules. Go to SE37 and put in
msaccess and hit PF4.
The following is from the readme file: sapgui/ps/readme.sap
For the MS-Access interface SAP delivers 4 files:
WDPSASTR.EXE This is an RFC server program that is called by SAP R/3
(PS module). This program creates a MS Access database. The structure
information of the tables is transferred from R/3. In addition to
these tables a table named DDIC is created. This table contains the
structure information and should in no case be modified or deleted.
WDPSATAB.EXE This is an RFC server program that is called by SAP R/3
after WDPSASTR. This program filles the tables of the database with data.
There must not be made any changes of the structure of
the tables between the calls of WDPSASTR and WDPSATAB.
WDPSAZET.EXE This is an RFC client program that triggers work/time
confirmations in the PS module of SAP R/3 (like transaction CN27 Collectiv
confirm).
WDPSAMAT.EXE This is an RFC client program that triggers material
confirmations in the PS module of SAP R/3 (like transaction MB1A - Goods
Please also refer following links,
[Click here|Upload data from MS Access tables, to SAP tables.;
Before using the program "RIACCESS", you need to install the PS utilities, which are part of SAPGUI install CD.
It is available in the "SAPGUIPS directory".
Then do the followings :
1. Select transaction code SALE -> Systems in network-> Define RFC Destination.
2. You will need two RFC destinations (TCP/IP connections for the front-end workstation).
Setup the two RFC destinations PS_ACCESS_1 and PS_ACCESS_2 and you'll have to get them to point to
wdpsastr.exe and wdpsatab.exe respectively.
3. Then execute RIACCESS and choose PS_ACCESS_1 to generate access tables.
The system must also be able to access the RFC-DLL files (librfc2.dll, librfc3.dll, librfc4.dll, librfc5.dll, librfc6.dll, vrfc.dll).
Please note that Access only supports tables with up to 255 fields.

Cannot connect to Access 2007

I got an exception error for connecting to Access 2007 (.accdb) . However, I can connect to the Access file with the .mdb file. I am using window vista. I would like to know is there anything I need to configure to be able to connect to the Access (.accdb).
Error:java.sql.SQLException: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
How do I specify a driver?
Thank You

BB81 wrote:
I do print them? what should I do. I have no idea how to connect to the database I have now. I am wandering whether I need to download a driver? where can I download it? Does sun offer a free download driver for connection to database using ODBC?
Your code looks something like this.
DB_URL+=filename.trim()+";DriverID=22;READONLY=true}";
con = DriverManager.getConnection( DB_URL ,"","");
Your code needs to look like this.
DB_URL+=filename.trim()+";DriverID=22;READONLY=true}";
System.out.println("DB_URL=[" + DB_URL +"]");
con = DriverManager.getConnection( DB_URL ,"","");
Once you have run that then you post all of the line that println() prints here. You copy and paste it (do NOT retype it.)
Then you also post the full stack trace.

How to integrate sap bw and sap pi system

Hi all,
I am doing interface to integrate SAP BW and SAP PI syetms .here i want to send data from SAP BW infocube to pi after that i need to send the data sap apo system.sap bw and sap pi intergration part is pending so how integrate these two systems and how to send data from infocube i am not clear abt process.i came to know tht do with proxy.but process i dont know clearly.
Can anyone tell me the process to integration process and any outbound sap bw to pi scenario blogs are information is very helpful.
Thanks
SG

>> Can anyone tell me the process to integration process and any outbound sap bw to pi scenario blogs are information is very helpful
Basically you need to use client proxy.
A) Create data type , mesg typ, service inteface, message mapping and interface mapping as usual in ESR
B) In Integration Directory, YOu dont need sender communication channel and sender agreement. Because you are using client proxy. rest are all same
C) You need to do proxy configuration between SAP BW and PI to establish connection
Note: PI to sap apo system communication is already known. Then in PI target message follow that system structure in ESB and use the supported adapter for that system in Integration Directory.
Hope this helps

For Connect MS-Access to SAP - XI System , what Driver is required?

Similar Messages

Maybe you are looking for