For Contacts only is not working properply

My friend and I were testing the settings and security of Skype. We both clearly marked and saved For Contacts only for communication and avatar and any other. I blocked my friend and removed her from the contact list and ensured she was on the block list. She did the exact same thing. However, when I did a search on her name, her picture avatar and her information immediately came up but with a red circle but I can still see her info and picture. I went back and cleared the cache and ran another search and the same thing happened and vise versa. How is this possible? Both of us have saved on contacts only but she can still see my avatar and vise versa. I did not need to share information because I can have it along with her picture. When I added her name back to the contact list the only difference it made was that I cannot communicate with her until she unblocks me but I still can have her picture, name and all of her information on my contact list. What's really odd if I select any other random name, I cannot gain their information or picture. Does Skype store original request friendship add-on agreement? The version of Skype that I have is 7.3 

use NOT operator so it would be "NOT refinablestring:something"
kashif

Similar Messages

  • HT1947 Remote for ipad landscape orientation not working in ios 7

    Remote for ipad landscape orientation not working in ios 7

    See this thread: remote app rotation locked in portrait orientation after iOS 7 upgrade
    It is a discussion only - no helpful hints.  Appears to be a bug for sure.

  • Email notifications are the only thing NOT working!!!

    Email notifications are the only thing NOT working!!! Everything is set up correctly. The form works and the person submitting gets a message, but I don't. I tried 3 different email addresses and still not working. Any real fix for this?

    Hello:
    Try resetting the PRAM.
    Barry

  • Search in contacts app is not working in iPhone

    Search in my contacts app is not working, any ideas?

    Hey zoliadler,
    Thanks for the question. I understand that you are experiencing issues with your Contacts application. To troubleshoot these issues, let’s force the app to close, then restart your device:
    iOS: Force an app to close
    http://support.apple.com/kb/HT5137
    Turn your iOS device off and on (restart) and reset
    http://support.apple.com/kb/HT1430
    Thanks,
    Matt M.

  • Windows key inoperative dv7-4285 windows 7 - 64 bit. only key not working

    Windows key inoperative dv7-4285 Windows 7 - 64 bit. The Windows key is the only key not working.

    Thanks for the information,
    I have a couple of suggestions that may help with this issue. My first suggestion would be to uninstall and reinstall the drivers for the keyboard.
    Follow these steps to do that:
    Click the "Start Menu"
    Type "Device" in the search box under all programs
    Select "Device Manager"
    Click "Keyboards"
    Remove all devices under keyboards by right clicking and selecting" uninstall" on each device
    Restart the computer
    How long has the button not been working?
    Are there any other keys not working or producing the wrong character?
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Can we get reimbursed for apps that do not work

    Can I get reimbursed for apps that do not work?

    Hi...
    You can contact iTunes support here and see if they will make an exception:
    http://www.apple.com/support/itunes/contact/
    They usually respond within 24 hours.
    Hope this helps.

  • New Release QuickVPN client 1.4.0.5 for windows 7 does not work????

    New release of QuickVPN client version  1.4.0.5  for windows 7 is not working properly.
    We can not connect; instead we receive this message:
    "Remote Gateway is not responding, do you want to wait?"
    Dear Cisco,,,,
    Your release is not complete; please correct issue and advise after it has been tested.
    Rgds, EM

    Hi, first disable this POLSTORE.DLL again in your QuickVPN-Folder. Then start in this folder IPSEC.MSC and than IPSEC.EXE. You should get from IPSEC.EXE  the error above. If not, than any other problem you have. Follow all the hints here in this thread.
    If you get the same error above, than enable this POLSTORE.DLL again and start the IPSEC.EXE. You get the full info what has been gone. And within the IPSEC-Window for Local Computer you may find this FREESWAN-setting.
    B.t.w. before I went this way I did export and import the IPSEC-settings from the XP-machine, as it was hinted some posts earlyer. But the way I have gone, works also with manualy deleting the FREESWAN config. With the IPSEC.EXE it will new generated in any case.
    When you start via QuickVPN you may monitor also what happens within this IPSEC for Local Computer. Press F5 to keep it aktual.
    From time to time the connection gets only succeeded after the second and more times. I have a very slow UMTS Internet-Access.
    Juergen
    Adding: These effects, getting not connected, first and during the VPN-Tunnel exists, has not changed since the top-first Version of Quick-VPN.
    Dear customer, be patient, don't care about these stupid messages, click again or when the connection allready has succeeded through the VPN-tunnel do what you did like to do.
    ...... and again, with which configuration-scenario do the guys at Cisco test and develop .....
    Fortunately, I never was a Cisco partner, only a poor user ;)

  • What can I do for the following situation: I think my insert slot for the headphones does not work; when I put in any cable that should and can go in all I hear is low frequent static sounds.

    What can I do for the following situation: I think my insert slot for the headphones does not work; when I put in any cable that should and can go in all I hear is low frequent static sounds.

    You might try talking to the Apple store manager and see if you don't get more help...you might also contact Apple.com/support and see if they can give you a contact with the Apple Italy offices.
    Sounds like you have two levels of failure, the first shop that did the repair and broke a wire, and the second that has disabled something else and isn't helping.
    Apple officially refurbished equipment is usually good quality.  Surprising this has happened but you need to press on with complaints and try for resolution.

  • HT201436 Hello, my name is brad and I recently had a voicemail app that I was using and now i got rid of it. But now my voicemail for the phone will not work. I tried to reset the network settings and nothing happened. I was wondering if you could help me

    Hello, my name is brad and I recently had a voicemail app that I was using and now i got rid of it. But now my voicemail for the phone will not work. I tried to reset the network settings and nothing happened. I was wondering if you could help me out?

    When you set up a voicemail redirection, usually you have to remove that redirection from the account that redirected it.  Like Google Voice, if you activate Google Voice to receive your voicemail, you will have to log into voice.google.com to turn it off.  If you contact your carrier, they can tell you exactly what program has taken over your voicemail functionality just in case you are stuck, but if you know the name of that App, I'm sure you will be able to figure it out.  Hope this helps you out.

  • My dvd slot for imac10,1 does not work. It rejects the disc. Problem after reinstall of backup from hdd.

    My dvd slot for imac10,1 does not work. I had a new harddrive installed in November and the MacStore installed my backups from an external harddrive. I do not use it other than to upload programs, so I have not tried using it until tax season, but it rejects the disc. The ata file indicates no dvd firmware, but the serial-ata does indicate firmware for a dvdrw. What might I do about this to bring the dvd back, least expensive to most?

    Yesterday I started having the same problem. Can read disc (play movies and music) but blank disk are ejected or idvd cannot see the blank disk. I have a almost 12 month old 27" i7 imac.

  • I want to reset my ipod touch 4th gen but i have forgotten the restrictions passcode and for some reason its not working on my laptop on itunes and the restore thing wont work! any help?

    I want to reset my ipod touch 4th gen but i have forgotten the restrictions passcode and for some reason its not working on my laptop on itunes and the restore thing wont work! any help?

    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download
    Then See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4.
    After you have Recovered your Device...Re-Sync your Content
    Note:
    To remove a forgotten Restrictions passcode you will need to  Restore the Device as New...
    OR... From a Backup created Before the Restrictions Code was set....

  • Auto To working for one material and not working for other material

    Hi,
    Hope everybody is doing fine.
    I have configured the auto TO. Its working fine for one material and not working for the other material. I checked the material master and wm 1,2 views have the same fileds / values. What could be wrong?
    I didn't setup the back ground processing job. Is that is affecting it?
    thanks for any help.
    regrads,
    KHAN

    Thnaks,
    You are right but then what could be wrong? Its working for one material and not working for otehr material? Any clue?
    Appreciate your time charlie

  • My new Dell PC running Windows 8 does not recognize my iPad or iPhone. Worked OK for iPhone for months but would not work for new iPad.  I removed /relaoded iTunes and now it won't recognize either iPad or iPhone.

    My new Dell PC running Windows 8 does not recognize my iPad or iPhone. Worked OK for iPhone for months but would not work for new iPad.  I removed /relaoded iTunes and now it won't recognize either iPad or iPhone. Got any suggestions?

    Hi there Lizabethfromaz,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    -Griff W. 

  • Link for territory mgmt is not working

    Hi All,
    We have territory management configured for three custom attributes.
    Link for territory management is not working for territory assignment block on account overview screen.
    Any hint how we can solve this issue?
    Thanks and Regards,
    Gauri.

    How are you resetting the password?
    Resetting User Password in Lion, Mountain Lion & Mavericks
    Boot into your Recovery Partition by hold down the Command and R keys whilst booting.
    When the Recovery screen appears, go to the Utilities menu and open Terminal.
    In Terminal, type:
    resetpassword
    ...a small app will open and allow you to choose the user for whom you want to change the password. If you are the admin, be certain that you choose your admin user. Type in your new password twice and give yourself a good hint. Click OK (or Done or whatever) and reboot, enjoying the use of your new, hopefully memorable, password.
    Good luck,
    Clinton

  • Can't get to settings to turn on wifi because "sign in to icloud" pops up and asks for pw which does not work because i can't get to wifi  ?p

    can't get to settings to turn on wifi because "sign in to icloud" pops up and asks for pw which does not work because i can't get to wifi  ?

    The problem is I cannot turn on wireless setting.  The "sign in to icloud  -- enter appleid password" popup will not go away. when i enter the pw and click ok, the same balloon pops up again.  If I click "cancel" it pops again. Since I am not on the internet (because I cannot turn the ipad wireless on) the sign in to icloud obviously will not work.  Vicious circle.

Maybe you are looking for