For Cox customers: sending mail

After a great deal of frustration trying to send email from my iPad .... maybe this will help some people having the same problem.
You can, for a around $15/yr., send up to 150 emails a day over wifi using an independent outbound SMTP server ... works GREAT with Cox with my iPad, iPhone and laptop. I use a service from dyndns.com One account will service multiple email addresses too.
Very easy to set up the devices.
I'm not affiliated with this company, just happy that this solved my problem.

Similar Messages

Getting mail authentication errors for outlook user sending mail

When Outlook 2010 user attempts to use port 587 to send mail (to himself at this point), we see the following in the server logs:
(User in question can attach to file shares on the same server just fine from his Windows laptop)
Outlook config for outbound server is "port: 587, encryption TLS"
When we connect, we get "connection interrupted by server"
Tried other encryption methods - outlook 2010 states that server does not support the other methods (None, SSL)
SMTPD Logs
Jul 29 22:22:58 <servername>.l-n-l.com postfix/smtpd[2306]: connect from <Outlook Client Name>[<Outlook ClientAddr>]
Jul 29 22:22:58 <servername>.l-n-l.com postfix/smtpd[2306]: error: validate response: error: Authentication server failed to complete the requested operation.
Jul 29 22:22:58 <servername>.l-n-l.com postfix/smtpd[2306]: error: validate response: authentication failed for user=colin (method=DIGEST-MD5)
Jul 29 22:22:58 <servername>.l-n-l.com postfix/master[1407]: warning: process /usr/libexec/postfix/smtpd pid 2306 killed by signal 6
Jul 29 22:22:58 <servername>.l-n-l.com postfix/master[1407]: warning: /usr/libexec/postfix/smtpd: bad command startup -- throttling
Jul 29 22:24:12 <servername>.l-n-l.com postfix/smtpd[2270]: timeout after END-OF-MESSAGE from localhost[127.0.0.1]
Jul 29 22:24:12 <servername>.l-n-l.com postfix/smtpd[2270]: disconnect from localhost[127.0.0.1]
Meanwhile: Mac clients are able to connect to smptd submission port to send mail with no problems. Based on what the logs say, it appears that the Mac mail is using a different authentication mechanism.
Client config for outbound server is "use custom port: 587, Use SSL:Checked, Authentication: MD5 Challenge-Response"
Jul 29 22:19:12 <servername>.l-n-l.com postfix/smtpd[2261]: connect from <Mac Client Name>[<MacClientAddr>]
Jul 29 22:19:12 <servername>.l-n-l.com postfix/smtpd[2261]: 721FCEC991: client=<Mac Client Name>[<MacClientAddr>], sasl_method=CRAM-MD5, sasl_username=<username>@l-n-l.com
Jul 29 22:19:12 <servername>.l-n-l.com postfix/cleanup[2267]: 721FCEC991: message-id=<[email protected]>
Jul 29 22:19:12 <servername>.l-n-l.com postfix/qmgr[1800]: 721FCEC991: from=<[email protected]>, size=573, nrcpt=1 (queue active)
Jul 29 22:19:12 <servername>.l-n-l.compostfix/smtpd[2270]: connect from localhost[127.0.0.1]
Jul 29 22:19:12 <servername>.l-n-l.com postfix/smtpd[2270]: E722AEC9A0: client=localhost[127.0.0.1]
Jul 29 22:19:12 <servername>.l-n-l.com postfix/cleanup[2267]: E722AEC9A0: message-id=<[email protected]>
Jul 29 22:19:12 <servername>.l-n-l.com postfix/qmgr[1800]: E722AEC9A0: from=<[email protected]>, size=994, nrcpt=1 (queue active)
Jul 29 22:19:12 <servername>.l-n-l.com postfix/smtp[2268]: 721FCEC991: to=<[email protected]>, relay=127.0.0.1[127.0.0.1]:10024, delay=0.55, delays=0.06/0.01/0.01/0.48, dsn=2.0.0, status=sent (250 2.0.0 from MTA(smtp:[127.0.0.1]:10025): 250 2.0.0 Ok: queued as E722AEC9A0)
Jul 29 22:19:12 <servername>.l-n-l.com postfix/qmgr[1800]: 721FCEC991: removed
Jul 29 22:19:13 <servername>.l-n-l.com postfix/pipe[2273]: E722AEC9A0: to=<[email protected]>, relay=dovecot, delay=0.13, delays=0/0.01/0/0.12, dsn=2.0.0, status=sent (delivered via dovecot service)
Jul 29 22:19:13 <servername>.l-n-l.com postfix/qmgr[1800]: E722AEC9A0: removed
Jul 29 22:20:12 <servername>.l-n-l.com postfix/smtpd[2261]: disconnect from <Mac Client Name>[<MacClientAddr>]
Running OS X 10.8.4 with Server 2.2.1.
Any thoughts on what I need to do to make OSX Server mail play nice with Outlook over the submission port?
Thanks in advance!!

Ok - so I think I have it almost all sussed. So for all 3 of you who might be reading this, here is what is going on.
1) As I expected, this has nothing to do with the FQDN/Outlook problem. I actually rejoiced when I finally got far enough to have that problem with my Outlook 2007 and 2010 clients. And I don't like the recommended fix for that either. There is another way - more on that in a minute.
2) This problem was all about authentication methods. At present, I have OS X Mail Server set for plain text and APOP only. I will be working to fix this soon - but at present I am unable to find any other combination that permits both Mac Mail and Outlook clients to authenticate properly. Mac Mail wants to use CRAM-MD5 by default. Outlook is so incompatible with CRAM-MD5 that even when there are other authentication methods available on the mail server, if CRAM-MD5 is selected on the Server then Outlook fails miserably no matter how you configure the Outlook client. Caveat: this is my own observation and I still have some experimenting to do. If you know otherwise (or can confirm more definitively), then please speak up!
So here is the working configuration at present:
   A) Mail Server authentication set to Custom with PlainText and APOP selected, all others blank.
   B) Firewall permits inbound from ports 25 (for mail from "outside"), 587 (submission for authenticated users, TLS) 993 (SSL IMAP), and 995 (SSL POP).
   C) Mac POP Clients:
      i) For retrieval (POP) In advanced settings, use Port 995, Check "Use SSL", Select APOP for authentication.
      ii) For submission (SMTP) : Set port 587 (only), Set Authentication to "Password"
    D) Outlook 2007,2010,2013 clients
       i) For retrieval (POP), Set "Require secure logon using SPA"
      ii) In "More Settings/Outgoing Server" set it to require authentication with same credentials as inbound
     iii) In "More Settings/Advanced"
         a) Turn on Encryption for the POP3, this should change the port to 995 automatically. If it does not, fix that too.
         b) Set outgoing server to 587
         c) Set TLS for the encryption type (nothing else will work here)
Once you do 2.A, 2.B, 2.D, you will THEN, finally encounter the FQDN problem.
3) So Apple and a lot of folks here in the forums resolve the FQDN problem by removing one of the restrictions:
    Remove "reject_non_fqdn_helo_hostname" from "smtpd_helo_restrictions" in your postfix main.cf file.
I have at least 2 problems with this:
   A) It removes yet another little bit of security from the setup
   B) It involves non-GUI changes to the config...which is dangerous if you use the GUI, as changes within the GUI will often result in overwrites to your changes outside the GUI. So you can easily lose this fix without being aware of it until one of your Outlook users starts screaming.
The problem is really with Outlook and Windows not sending the FQDN in the first place. So how about we force them to do that instead? It turns out not to be too hard. I found a thread somewhere that goes into this and it works. Further, the solution remains on through reboots AND also can be made part of an automated deployment of a standard config. The only gotcha is you have to edit the registry...so you have to be careful. You only need to do this ONCE though, and the two entries are easy to find.
C) Under HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/services/Tcpip/Parameters
       i) Set Hostname to the FQDN of your host (replace HOST with HOST.domain.com - or .net, or whatever)
      ii) Set NV Hostname to the FQDN of your host
      iii) Close Regedit and Reboot to have the changes take effect
Once you do this, the FQDN problem for Outlook users goes away.
So I am looking for suggestions to make the SMTP submission more secure. Aside from that, things are working - and I have had to make ZERO changes to config files outside of the Server GUI - a plus as far as I am concerned.

Looking for function that send mail

I AM LOOKING FOR A FUNCTION THAT SEND MAIL
<b><b>WITH ATTACMENT ONLY</b> ANYONE KNOW????
THANKS.

REPORT ZMAILOUTPUT
    MESSAGE-ID ZZ.
* CONSTANTS                                                           *
CONSTANTS : C_X(1)      TYPE C VALUE 'X',      " For constant value
            C_OTF(3)    TYPE C VALUE 'OTF',    " For format
            C_U(1)      TYPE C VALUE 'U'.      " Mail Option
* VARIABLES                                                           *
DATA : V_RQIDENT TYPE TSP01-RQIDENT, " For Spool Number
       V_RQCLIENT TYPE TSP01-RQCLIENT, " For Client
       V_RQO1NAME TYPE TSP01-RQO1NAME, " For Object name
       V_SPOOL    TYPE TSP01-RQIDENT, " For Spool Number
       V_SPOOL1   TYPE TSP01-RQIDENT. " For Spool Number
* FLAGS                                                               *
DATA : F_SPOOL TYPE C.
*   INTERNAL TABLES                                                    *
* Internal table for sending mails
DATA: IT_PDF          LIKE TLINE      OCCURS 10 WITH HEADER LINE,
      IT_XI_PDF       LIKE TLINE      OCCURS 0 WITH HEADER LINE,
      IT_HTML         LIKE SOLISTI1   OCCURS 0 WITH HEADER LINE,
      IT_XI_TEMP      LIKE BAPIQCMIME OCCURS 0 WITH HEADER LINE,
      IT_XI_MIME(255) TYPE C          OCCURS 0 WITH HEADER LINE.
* For sending mail
DATA: IT_OBJPACK LIKE SOPCKLSTI1 OCCURS 2 WITH HEADER LINE.
* Internal table for Single List with Column Length 255
DATA : IT_OBJBIN LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
* Internal table for Single List with Column Length 255
DATA : IT_OBJTXT LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
* Internal table for Structure of the API Recipient List
DATA : IT_RECLIST LIKE SOMLRECI1 OCCURS 5 WITH HEADER LINE.
* Structure of the API Recipient List
DATA: X_DOC_CHNG LIKE SODOCCHGI1.
* Internal table for storing the variants
DATA : BEGIN OF IT_VARIANT1 OCCURS 0,
        VARIANT LIKE VARID-VARIANT,
       END   OF IT_VARIANT1.
* Internal table to store variants for the programs
DATA: IT_VARIANT2 LIKE IT_VARIANT1 OCCURS 0 WITH HEADER LINE.
* Internal table for storing the selected values
DATA IT_RETURN TYPE DDSHRETVAL OCCURS 0 WITH HEADER LINE.
* Internal table for storing the mail-ids
DATA : BEGIN OF IT_MAILID OCCURS 0,
        KOKRS LIKE CSKS-KOKRS,
        KOSTL LIKE CSKS-KOSTL,
        DATBI LIKE CSKS-DATBI,
        TELX1 LIKE CSKS-TELX1,
       END   OF IT_MAILID.
* Internal table for storing the mail-ids
DATA : IT_MAILID1 LIKE IT_MAILID OCCURS 0 WITH HEADER LINE.
*   SELECTION SCREEN                                                   *
DATA : V_CHAR TYPE CHAR50.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS: S_EMAIL FOR V_CHAR NO INTERVALS
                LOWER CASE
                NO-DISPLAY.
SELECT-OPTIONS: S_EMAIL1 FOR V_CHAR NO INTERVALS
                LOWER CASE
                NO-DISPLAY.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK A1 WITH FRAME TITLE TEXT-028.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : P_C1 AS CHECKBOX.
SELECTION-SCREEN COMMENT 3(66) TEXT-026 FOR FIELD P_C1.
SELECTION-SCREEN END OF LINE.
PARAMETERS : P_SET LIKE TSP1D-PAPART MATCHCODE OBJECT ZH_TSP1D.
SELECTION-SCREEN SKIP 1.
PARAMETERS : P_VARA1 TYPE RS38M-SELSET.
SELECTION-SCREEN END OF BLOCK A1.
SELECTION-SCREEN BEGIN OF BLOCK A2 WITH FRAME TITLE TEXT-029.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : P_C2 AS CHECKBOX.
SELECTION-SCREEN COMMENT 3(56) TEXT-027 FOR FIELD P_C1.
SELECTION-SCREEN END OF LINE.
PARAMETERS : P_SET1 LIKE TSP1D-PAPART MATCHCODE OBJECT ZH_TSP1D.
SELECTION-SCREEN SKIP 1.
PARAMETERS : P_VARA2 TYPE RS38M-SELSET.
SELECTION-SCREEN END OF BLOCK A2.
* AT SELECTION SCREEN ON VALUE REQUEST
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_VARA1.
* For fetching the variants available for the program
PERFORM FETCH_VARIANTS.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_VARA2.
* For fetching the variants available for the program
PERFORM FETCH_VARIANTS1.
* AT SELECTION SCREEN
AT SELECTION-SCREEN.
* For Validation
PERFORM VALIDATION.
* START OF SELECTION                                                  *
START-OF-SELECTION.
* To get the output data and mail
PERFORM FETCH_DATA.
* END OF SELECTION                                                    *
END-OF-SELECTION.
IF F_SPOOL = C_X.
    MESSAGE E000 WITH 'Spool Not Generated'(060).
ENDIF.
*&      Form fetch_data
*       To get the output data and mail
FORM FETCH_DATA .
* To send the output to spool
PERFORM GENERATE_SPOOL.
ENDFORM.                    " fetch_data
*&      Form generate_spool
*       To send the output to spool
FORM GENERATE_SPOOL .
DATA: L_PARAMS LIKE PRI_PARAMS,
        L_DAYS(1) TYPE N VALUE 2,
        L_COUNT(3) TYPE N VALUE 1,
        L_VALID    TYPE C,
        L_VALID1   TYPE C,
        L_PARAMS1 LIKE PRI_PARAMS.
DATA: L_DEVICE TYPE USR01-SPLD.
*Get the printer name for the user
SELECT SINGLE SPLD INTO L_DEVICE FROM USR01 WHERE BNAME = SY-UNAME.
IF L_DEVICE IS INITIAL.
    L_DEVICE = 'LOCL'.
ENDIF.
* For report-1
IF P_C1 = 'X'.
* Setting the print parameters
    CALL FUNCTION 'GET_PRINT_PARAMETERS'
      EXPORTING
        DESTINATION    = L_DEVICE
        COPIES         = L_COUNT
        LIST_NAME      = SY-UNAME
        LIST_TEXT      = 'SUBMIT ... TO SAP-SPOOL'(008)
        RELEASE        = C_X
        NEW_LIST_ID    = C_X
        EXPIRATION     = L_DAYS
*        LINE_SIZE      = 255
*        LINE_COUNT     = 65
        LAYOUT         = p_set
        SAP_COVER_PAGE = SPACE
        COVER_PAGE     = SPACE
        RECEIVER       = 'SAP*'(010)
        DEPARTMENT     = 'System'(011)
        NO_DIALOG      = C_X
      IMPORTING
        OUT_PARAMETERS = L_PARAMS
        VALID          = L_VALID.
    IF L_VALID <> SPACE.
      CLEAR V_SPOOL.
* Fetch the spool number b4 submit
      PERFORM FETCH_RECENT_SPOOL USING V_SPOOL.
* Submitting the program to spool
      SUBMIT RKAEP000 TO SAP-SPOOL
        USING SELECTION-SET P_VARA1
        SPOOL PARAMETERS L_PARAMS
        WITHOUT SPOOL DYNPRO
        AND RETURN.
      CLEAR V_SPOOL1.
* Fetch the spool number after submit
      PERFORM FETCH_RECENT_SPOOL USING V_SPOOL1.
      IF V_SPOOL = V_SPOOL1.
        F_SPOOL = C_X.
        IF P_C2 IS INITIAL.
          STOP.
        ENDIF.
      ELSE.
* Checking the format ( ABAP/OTF)
        PERFORM FORMAT_CHECK TABLES S_EMAIL.
      ENDIF.
    ELSE.
      MESSAGE E000 WITH 'Problem in print settings'(003).
      STOP.
    ENDIF.
ENDIF.
* For Report-2
IF P_C2 = 'X'.
* Setting the print parameters
    CALL FUNCTION 'GET_PRINT_PARAMETERS'
      EXPORTING
        DESTINATION    = L_DEVICE
        COPIES         = L_COUNT
        LIST_NAME      = SY-UNAME
        LIST_TEXT      = 'SUBMIT ... TO SAP-SPOOL'(008)
        RELEASE        = C_X
        NEW_LIST_ID    = C_X
        EXPIRATION     = L_DAYS
*        LINE_SIZE      = 200
*        LINE_COUNT     = 65
        LAYOUT         = p_set1
        SAP_COVER_PAGE = SPACE
        COVER_PAGE     = SPACE
        RECEIVER       = 'SAP*'(010)
        DEPARTMENT     = 'System'(011)
        NO_DIALOG      = C_X
      IMPORTING
        OUT_PARAMETERS = L_PARAMS1
        VALID          = L_VALID1.
    IF L_VALID1 <> SPACE.
      CLEAR V_SPOOL.
* Fetch the spool number b4 submit
      PERFORM FETCH_RECENT_SPOOL USING V_SPOOL.
* Submitting the program to spool
      SUBMIT GP3DIEHXY88SNFJ0391V7KF9EK7050 TO SAP-SPOOL
        USING SELECTION-SET P_VARA2
        SPOOL PARAMETERS L_PARAMS1
        WITHOUT SPOOL DYNPRO
        AND RETURN.
      CLEAR V_SPOOL1.
* Fetch the spool number after submit
      PERFORM FETCH_RECENT_SPOOL USING V_SPOOL1.
      IF V_SPOOL = V_SPOOL1.
        MESSAGE E000 WITH 'Spool Not Generated'(060).
        STOP.
      ENDIF.
* Checking the format ( ABAP/OTF)
      PERFORM FORMAT_CHECK TABLES S_EMAIL1.
    ELSE.
      MESSAGE E000 WITH 'Problem in print settings'(003).
      STOP.
    ENDIF.
ENDIF.
ENDFORM.                    " generate_spool
*&      Form fetch_recent_spool
*       Fetch the recent spool number generated
FORM FETCH_RECENT_SPOOL USING P_V_SPOOL TYPE TSP01-RQIDENT .
DATA: L_USER LIKE TSP01-RQ2NAME.
CLEAR : V_RQIDENT,
          V_RQCLIENT,
          V_RQO1NAME.
L_USER = SY-UNAME.
* Get latest Spool No
SELECT SINGLE RQIDENT
                RQCLIENT
                RQO1NAME
         INTO (V_RQIDENT , V_RQCLIENT , V_RQO1NAME)
    FROM TSP01
   WHERE RQCRETIME =   ( SELECT MAX( RQCRETIME )
                                FROM TSP01
                               WHERE RQ2NAME EQ L_USER
                                 AND RQFINAL EQ '.' ).
IF SY-SUBRC = 0 .
    P_V_SPOOL = V_RQIDENT.
ENDIF.
ENDFORM.                    " fetch_recent_spool
*&      Form format_check
*       Checking the format ( ABAP/OTF)
FORM FORMAT_CHECK TABLES P_S_EMAIL STRUCTURE S_EMAIL.
DATA : L_OBJTYPE    LIKE RSTSTYPE-TYPE.
CALL FUNCTION 'RSTS_GET_ATTRIBUTES'
    EXPORTING
      AUTHORITY     = 'SP01'(019)
      CLIENT        = V_RQCLIENT
      NAME          = V_RQO1NAME
      PART          = 1
    IMPORTING
      OBJTYPE       = L_OBJTYPE
    EXCEPTIONS
      FB_ERROR      = 1
      FB_RSTS_OTHER = 2
      NO_OBJECT     = 3
      NO_PERMISSION = 4.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF L_OBJTYPE(3) = C_OTF.
* Convert OTF Spool to PDF
    PERFORM CONVERT_OTF2PDF TABLES P_S_EMAIL.
ELSE.
* Convert ABAP Spool to PDF
    PERFORM CONVERT_ABAP2PDF TABLES P_S_EMAIL.
ENDIF.
ENDFORM.                    " format_check
*&      Form convert_otf2pdf
*       Convert OTF Spool to PDF
FORM CONVERT_OTF2PDF TABLES P_P_S_EMAIL STRUCTURE S_EMAIL .
CLEAR   IT_PDF.
REFRESH IT_PDF.
DATA : L_BYTECOUNT TYPE I.
* Fn. to get the PDF format
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
    EXPORTING
      SRC_SPOOLID              = V_RQIDENT
      NO_DIALOG                = 'X'
    IMPORTING
      PDF_BYTECOUNT            = L_BYTECOUNT
    TABLES
      PDF                      = IT_PDF
    EXCEPTIONS
      ERR_NO_OTF_SPOOLJOB      = 1
      ERR_NO_SPOOLJOB          = 2
      ERR_NO_PERMISSION        = 3
      ERR_CONV_NOT_POSSIBLE    = 4
      ERR_BAD_DSTDEVICE        = 5
      USER_CANCELLED           = 6
      ERR_SPOOLERROR           = 7
      ERR_TEMSEERROR           = 8
      ERR_BTCJOB_OPEN_FAILED   = 9
      ERR_BTCJOB_SUBMIT_FAILED = 10
      ERR_BTCJOB_CLOSE_FAILED = 11.
IF SY-SUBRC = 0.
* For page format
    PERFORM PAGE_FORMAT TABLES P_P_S_EMAIL.
ELSE.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " convert_otf2pdf
*&      Form convert_abap2pdf
*        Convert ABAP Spool to PDF
FORM CONVERT_ABAP2PDF TABLES P_P_S_EMAIL STRUCTURE S_EMAIL.
CLEAR   IT_PDF.
REFRESH IT_PDF.
DATA : L_BYTECOUNT TYPE I.
* Fn. to convert to PDF format
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
    EXPORTING
      SRC_SPOOLID              = V_RQIDENT
      NO_DIALOG                = 'X'
    IMPORTING
      PDF_BYTECOUNT            = L_BYTECOUNT
    TABLES
      PDF                      = IT_PDF
    EXCEPTIONS
      ERR_NO_ABAP_SPOOLJOB     = 1
      ERR_NO_SPOOLJOB          = 2
      ERR_NO_PERMISSION        = 3
      ERR_CONV_NOT_POSSIBLE    = 4
      ERR_BAD_DESTDEVICE       = 5
      USER_CANCELLED           = 6
      ERR_SPOOLERROR           = 7
      ERR_TEMSEERROR           = 8
      ERR_BTCJOB_OPEN_FAILED   = 9
      ERR_BTCJOB_SUBMIT_FAILED = 10
      ERR_BTCJOB_CLOSE_FAILED = 11.
IF SY-SUBRC = 0.
* For page formatting
    PERFORM PAGE_FORMAT TABLES P_P_S_EMAIL.
ELSE.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " convert_abap2pdf
*&      Form send_mail
*       For sending mail
FORM SEND_MAIL TABLES MAIL STRUCTURE S_EMAIL .
* Structures and internal tables for the send data
DATA: OBJPACK LIKE SOPCKLSTI1 OCCURS 2 WITH HEADER LINE,
        OBJHEAD LIKE SOLISTI1   OCCURS 1 WITH HEADER LINE,
        OBJBIN LIKE SOLISTI1   OCCURS 0 WITH HEADER LINE,
        OBJTXT LIKE SOLISTI1   OCCURS 10 WITH HEADER LINE,
        RECLIST LIKE SOMLRECI1 OCCURS 5 WITH HEADER LINE.
DATA: DOC_CHNG LIKE SODOCCHGI1,
        TAB_LINES LIKE SY-TABIX.
* Data for the status output after sending
DATA: SENT_TO_ALL LIKE SONV-FLAG.
CLEAR: IT_RECLIST, IT_RECLIST[],
         IT_OBJTXT , IT_OBJTXT[],
         IT_OBJPACK, IT_OBJPACK[],
         IT_OBJBIN , IT_OBJBIN[],X_DOC_CHNG.
LOOP AT IT_HTML.
    OBJBIN-LINE = IT_HTML-LINE.
    APPEND OBJBIN.
    CLEAR OBJBIN.
ENDLOOP.
* Create the document which is to be sent
DOC_CHNG-OBJ_NAME = 'List'(012).
DOC_CHNG-OBJ_DESCR = 'Mail'(013).
* Heading
OBJTXT-LINE = 'Mail with pdf attachment'(014).
APPEND OBJTXT.
CLEAR OBJTXT.
* Size
DESCRIBE TABLE OBJTXT LINES TAB_LINES.
READ TABLE OBJTXT INDEX TAB_LINES.
DOC_CHNG-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).
* Fill the fields of the packing_list for the main document:
CLEAR OBJPACK-TRANSF_BIN.
* The document needs no header (head_num = 0)
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
* Body
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'RAW'(015).
APPEND OBJPACK.
* Create the attachment (the list itself)
DESCRIBE TABLE OBJBIN LINES TAB_LINES.
* Fill the fields of the packing_list for the attachment:
OBJPACK-TRANSF_BIN = 'X'.
* Header
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
* Body
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'PDF'(016).
OBJPACK-OBJ_NAME = 'Attachment'(017).
OBJPACK-OBJ_DESCR = 'Mail with pdf Attachment'(018).
OBJPACK-DOC_SIZE = TAB_LINES * 255.
APPEND OBJPACK.
*-Fill the mail recipient list
LOOP AT MAIL.
    RECLIST-RECEIVER = MAIL-LOW.
    RECLIST-REC_TYPE = C_U.
    APPEND RECLIST.
    CLEAR: RECLIST,
           MAIL.
ENDLOOP.
*-Send the document by calling the SAPoffice API1 module for sending
*-documents with attachments
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
      DOCUMENT_DATA              = DOC_CHNG
      PUT_IN_OUTBOX              = C_X
      COMMIT_WORK                = C_X
    IMPORTING
      SENT_TO_ALL                = SENT_TO_ALL
    TABLES
      PACKING_LIST               = OBJPACK
      OBJECT_HEADER              = OBJHEAD
      CONTENTS_BIN               = OBJBIN
      CONTENTS_TXT               = OBJTXT
      RECEIVERS                  = RECLIST
    EXCEPTIONS
      TOO_MANY_RECEIVERS         = 1
      DOCUMENT_NOT_SENT          = 2
      OPERATION_NO_AUTHORIZATION = 4
      OTHERS                     = 99.
CASE SY-SUBRC .
    WHEN 0.
      MESSAGE I000 WITH 'Mail has been sent successfully'(006).
    WHEN OTHERS.
      MESSAGE E000 WITH 'Problem in sending the mail'(023).
ENDCASE.
ENDFORM.                    " send_mail
*&      Form page_format
*        For page foramtting
FORM PAGE_FORMAT TABLES EMAIL STRUCTURE S_EMAIL .
DATA : L_LINES       TYPE I,
         L_TEMP(500)   TYPE C,
         L_OFFSET      TYPE P,
         L_LINESLEN(2) TYPE P,
         L_MIMELEN(2) TYPE P,
         L_TABIX       LIKE SY-TABIX.
CLEAR : IT_XI_PDF,
          IT_XI_TEMP.
REFRESH : IT_XI_PDF,
            IT_XI_TEMP.
IT_XI_PDF[] = IT_PDF[].
* Reformat the line to 255 characters wide (--code from SAP--)
CLEAR: L_TEMP, L_OFFSET, IT_XI_TEMP.
DESCRIBE TABLE IT_XI_PDF   LINES L_LINES.
DESCRIBE FIELD IT_XI_PDF   LENGTH L_LINESLEN IN CHARACTER MODE.
DESCRIBE FIELD IT_XI_TEMP LENGTH L_MIMELEN IN CHARACTER MODE.
LOOP AT IT_XI_PDF.
    L_TABIX = SY-TABIX.
    MOVE IT_XI_PDF TO L_TEMP+L_OFFSET.
    IF L_TABIX = L_LINES.
      L_LINESLEN = STRLEN( IT_XI_PDF ).
    ENDIF.
    L_OFFSET = L_OFFSET + L_LINESLEN.
    IF L_OFFSET GE L_MIMELEN.
      CLEAR IT_XI_TEMP.
      IT_XI_TEMP = L_TEMP(L_MIMELEN).
      APPEND IT_XI_TEMP.
      SHIFT L_TEMP BY L_MIMELEN PLACES.
      L_OFFSET = L_OFFSET - L_MIMELEN.
    ENDIF.
    IF L_TABIX = L_LINES.
      IF L_OFFSET GT 0.
        CLEAR IT_XI_TEMP.
        IT_XI_TEMP = L_TEMP(L_OFFSET).
        APPEND IT_XI_TEMP.
      ENDIF.
    ENDIF.
ENDLOOP.
CLEAR : IT_XI_MIME,
          IT_XI_MIME[].
LOOP AT IT_XI_TEMP.
    IT_XI_MIME(255) = IT_XI_TEMP-LINE.
    APPEND IT_XI_MIME.
    CLEAR IT_XI_MIME.
ENDLOOP.
* Final Data
CLEAR : IT_HTML,
          IT_HTML[].
IT_HTML[] = IT_XI_MIME[].
* For sending mail
PERFORM SEND_MAIL TABLES EMAIL.
ENDFORM.                    " page_format
*&      Form fetch_variants
*       For fetching the variants available for the program
FORM FETCH_VARIANTS .
DATA : L_PROGRAM LIKE RS38M-PROGRAMM VALUE 'RKAEP000',
         L_VARA1 TYPE DFIES-FIELDNAME VALUE 'P_VARA1'.
CLEAR : IT_VARIANT1,
          IT_VARIANT1[].
* Get variants
PERFORM GET_VARIANTS TABLES IT_VARIANT1
                       USING L_PROGRAM.
* F4 Help
IF NOT IT_VARIANT1[] IS INITIAL.
    PERFORM GET_F4_HELP TABLES IT_VARIANT1
                         USING L_VARA1
                        CHANGING P_VARA1.
ELSE.
    MESSAGE E000 WITH 'No variants available for report1'(054).
ENDIF.
ENDFORM.                    " fetch_variants
*&      Form validation
*       For Validation
FORM VALIDATION .
DATA : L_PRO1 LIKE RS38M-PROGRAMM VALUE 'RKAEP000',
         L_PRO2 LIKE RS38M-PROGRAMM VALUE 'GP3DIEHXY88SNFJ0391V7KF9EK7050',
         L_C1,
         L_C2.
* If both check-box are unchecked
IF P_C1 IS INITIAL
AND P_C2 IS INITIAL.
    MESSAGE E000 WITH 'Check any one check-box'(049).
ENDIF.
* If checked without varaint
IF NOT P_C1 IS INITIAL AND P_VARA1 IS INITIAL.
    MESSAGE E000 WITH 'Please give any one of the variant for report1'(055).
ENDIF.
* If checked without varaint
IF NOT P_C2 IS INITIAL AND P_VARA2 IS INITIAL.
    MESSAGE E000 WITH 'Please give any one of the variant for report2'(061).
ENDIF.
* Reading the variant and fetching the mail-ids
IF P_C1 = C_X.
    L_C1 = '1'.
    CLEAR : S_EMAIL,
            S_EMAIL[].
    PERFORM READ_VARIANTS TABLES IT_MAILID
                                 S_EMAIL
                           USING P_VARA1
                                 L_PRO1
                                 L_C1.
    IF S_EMAIL[] IS INITIAL.
      MESSAGE E000 WITH 'No Id available for given Cost report1'(066).
    ELSE.
      SORT S_EMAIL BY LOW.
      DELETE ADJACENT DUPLICATES FROM S_EMAIL COMPARING LOW.
    ENDIF.
ENDIF.
* Reading the variant and fetching the mail-ids
IF P_C2 = C_X.
    CLEAR : S_EMAIL1,
            S_EMAIL1[].
    L_C2 = '2'.
    PERFORM READ_VARIANTS TABLES IT_MAILID1
                                 S_EMAIL1
                           USING P_VARA2
                                 L_PRO2
                                 L_C2.
    IF S_EMAIL1[] IS INITIAL.
      MESSAGE E000 WITH 'No Id available for given Cost report2'(067).
    ELSE.
      SORT S_EMAIL1 BY LOW.
      DELETE ADJACENT DUPLICATES FROM S_EMAIL1 COMPARING LOW.
    ENDIF.
ENDIF.
ENDFORM.                    " validation
*&      Form GET_VARIANTS
*       Fetching Variants
FORM GET_VARIANTS TABLES   P_IT_VARIANT STRUCTURE IT_VARIANT1
                   USING    P_V_PROGRAM TYPE RS38M-PROGRAMM.
SELECT VARIANT
         FROM VARID
         INTO TABLE P_IT_VARIANT
         WHERE REPORT = P_V_PROGRAM.
ENDFORM.                    " GET_VARIANTS
*&      Form GET_F4_HELP
*       text
FORM GET_F4_HELP TABLES   P_IT_VARIANT1 STRUCTURE IT_VARIANT1
                   USING   P_L_VARA1 LIKE DFIES-FIELDNAME
                  CHANGING P_P_VARA LIKE P_VARA1.
* Fn. for Pop-Up
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      RETFIELD        = P_L_VARA1
      VALUE_ORG       = 'S'
      DISPLAY         = ' '
    TABLES
      VALUE_TAB       = P_IT_VARIANT1
      RETURN_TAB      = IT_RETURN
    EXCEPTIONS
      PARAMETER_ERROR = 1
      NO_VALUES_FOUND = 2
      OTHERS          = 3.
IF SY-SUBRC = 0.
    P_P_VARA = IT_RETURN-FIELDVAL.
ELSE.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " GET_F4_HELP
*&      Form FETCH_VARIANTS1
*       text
FORM FETCH_VARIANTS1 .
DATA : V_PROGRAM1 LIKE RS38M-PROGRAMM VALUE 'GP3DIEHXY88SNFJ0391V7KF9EK7050',
         L_VARA2 TYPE DFIES-FIELDNAME VALUE 'P_VARA2'.
CLEAR : IT_VARIANT2,
          IT_VARIANT2[].
* Get Variants
PERFORM GET_VARIANTS TABLES IT_VARIANT2
                       USING V_PROGRAM1.
* F4 Help
IF NOT IT_VARIANT2[] IS INITIAL.
    PERFORM GET_F4_HELP TABLES IT_VARIANT2
                        USING L_VARA2
                      CHANGING P_VARA2.
ELSE.
    MESSAGE E000 WITH 'No variants available for report2'(050).
ENDIF.
ENDFORM.                    " FETCH_VARIANTS1
*&      Form read_variants
*        Reading the variant and fetching the mail-ids
FORM READ_VARIANTS TABLES P_IT_MAILID STRUCTURE IT_MAILID
                          P_S_EMAIL   STRUCTURE S_EMAIL
                   USING P_P_VARA1   LIKE P_VARA1
                          P_L_PRO1    LIKE RS38M-PROGRAMM
                          P_L_C1      TYPE C.
DATA : L_TEMP(44),
         IT_VALUTAB LIKE RSPARAMS OCCURS 0 WITH HEADER LINE.
RANGES : R_COCEN FOR CSKS-KOSTL.
* Function Module to get the variant contents
CALL FUNCTION 'RS_VARIANT_CONTENTS'
    EXPORTING
      REPORT               = P_L_PRO1
      VARIANT              = P_P_VARA1
    TABLES
      VALUTAB              = IT_VALUTAB
    EXCEPTIONS
      VARIANT_NON_EXISTENT = 1
      VARIANT_OBSOLETE     = 2
      OTHERS               = 3.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CLEAR : R_COCEN,
          R_COCEN[].
LOOP AT IT_VALUTAB WHERE SELNAME = 'KOSTL'
                        OR SELNAME = '_C-CCTR'.
* Getting the range of cost centers
    IF IT_VALUTAB-OPTION = 'BT'.
      R_COCEN-LOW    = IT_VALUTAB-LOW.
* For Conversion Routine
      PERFORM CONVERSION USING R_COCEN-LOW.
      R_COCEN-HIGH   = IT_VALUTAB-HIGH.
* For Conversion Routine
      PERFORM CONVERSION USING R_COCEN-HIGH.
      R_COCEN-OPTION = 'BT'.
      R_COCEN-SIGN   = 'I'.
      APPEND R_COCEN.
      CLEAR R_COCEN.
    ENDIF.
* Getting the single cost centers
    IF IT_VALUTAB-OPTION = 'EQ'.
      R_COCEN-LOW    = IT_VALUTAB-LOW.
* For Conversion Routine
      PERFORM CONVERSION USING R_COCEN-LOW.
      R_COCEN-OPTION = 'EQ'.
      R_COCEN-SIGN   = 'I'.
      APPEND R_COCEN.
      CLEAR R_COCEN.
    ENDIF.
ENDLOOP.
* If no cost centers
IF NOT R_COCEN[] IS INITIAL.
    SELECT KOKRS
           KOSTL
           DATBI
           TELX1
      FROM CSKS
           INTO TABLE P_IT_MAILID
     WHERE KOSTL IN R_COCEN.
    IF P_IT_MAILID[] IS INITIAL.
      IF P_L_C1 = '1'.
        MESSAGE E000 WITH 'No IDs available for report1'(059).
      ELSEIF P_L_C1 = '2'.
        MESSAGE E000 WITH 'No IDs available for report2'(062).
      ENDIF.
    ENDIF.
* Deleting the blank entries
    DELETE P_IT_MAILID WHERE TELX1 = SPACE.
    CLEAR L_TEMP.
    READ TABLE P_IT_MAILID INDEX 1.
    L_TEMP = P_IT_MAILID-TELX1.
    DATA : L_CHECK.
    LOOP AT P_IT_MAILID WHERE TELX1 <> L_TEMP.
      L_CHECK = C_X.
    ENDLOOP.
* For checking the unique ids
    IF L_CHECK = C_X.
      IF P_L_C1 = '1'.
        MESSAGE E000 WITH 'No unique mail-ids for report1'(058).
      ELSEIF P_L_C1 = '2'.
        MESSAGE E000 WITH 'No unique mail-ids for report2'(065).
      ENDIF.
    ENDIF.
* Populating the IDs for the cost centers
    LOOP AT P_IT_MAILID.
      SET LOCALE LANGUAGE SY-LANGU.
      TRANSLATE P_IT_MAILID-TELX1 TO LOWER CASE.
      SET LOCALE LANGUAGE SPACE .
      CONCATENATE P_IT_MAILID-TELX1 '@allergan.com' INTO L_TEMP.
      P_S_EMAIL-LOW = L_TEMP.
      P_S_EMAIL-SIGN = 'I'.
      P_S_EMAIL-OPTION = 'EQ'.
      APPEND P_S_EMAIL.
      CLEAR P_S_EMAIL.
    ENDLOOP.
ELSE.
    IF P_L_C1 = '1'.
      MESSAGE E000 WITH 'No Cost Center Available for report1'(057).
    ELSEIF P_L_C1 = '2'.
      MESSAGE E000 WITH 'No Cost Center Available for report2'(063).
    ENDIF.
ENDIF.
ENDFORM.                    " read_variants
*&      Form CONVERSION
*       For Conversion Routine
FORM CONVERSION USING    P_IT_VALUTAB_LOW TYPE C.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
      INPUT = P_IT_VALUTAB_LOW
    IMPORTING
      OUTPUT = P_IT_VALUTAB_LOW.
ENDFORM.                    " CONVERSION
check this Program......

Is there a fix for "can't send mail?"

I just spent 4+ hours on this forum and worked through all suggestions I could find - still can't send mail. It happened yesterday afternoon, from one moment to the next - suddenly all my three POP accounts are offline and there was nothing I could do about it. I checked with Entourage, same thing there as well, can't send mail.
I have no idea if this is connected with the problem in many posts about the "can't send mail" issue or not, but at least on the surface it looks like it is.
Any help is appreciated! Thank you.

Yes, there are complaint sites online where I've read hundreds of complaints that trickle in one by one on different dates.
Take a look at this post, and the comments below it:
http://www.lockergnome.com/usrbingeek/2007/04/12/comcast-blocking-port-25/
This is going to be an ongoing problem for different users, one at a time.
DSL users in my area are going through a similar issue with their CenturyTel email accounts. Over the last two years they have added a new smtp server and some people were transferred immediately to it, and others got added month by month (some were on smtp.centurytel.net while others are on smtpauth.centurytel.net). Then a couple of months ago, they started requiring login and password to the smtp server, but not for all users. I get a few calls a month for the next batch. Centurytel has gone with a 3rd party email hosting company so that they don't have to deal with it.
I'm trying to set up all clients with the latest changes, but they don't always work in advance of the changes. It's hit and miss. CenturyTel has said that they have posted notices on their help site, but who goes there?
Maybe they are just trying to manage their tech support load during changes?
Message was edited by: dechamp

User exit for MIGO to send mail

Hi to all
My requirement is :
As soon as the goods is received through MIGO , an email should sent automatically .
For that i am looking for appropriate user exit.
But i am not getting it because no user exit is found at the time of saving the document.
I need that document for sending the mail.
Please guide me.
Thanks & regards
Anubhav

Consider configruation of output type for corresponding movement type.
https://wiki.sdn.sap.com/wiki/display/ERPSCM/Output%20Determination%20in%20Inventory%20Management%20(IM)

Prompt for folder when sending mail

I have many subfolders in mail, where I like to store both received, and sent messages. This means I have to go through my sent messages folder and manually drag the messages to the folders.
Years ago I worked with Lotus Notes, which had a very cool feature: it prompted you after sendin a mail for the folder where it should be stored. I later switched to Outlook, and found a macro which would do just that.
Is there an add-on to Apple Mail which does the same?

Launch Mail.
Mail > Preferences > General
Under New message sound uncheck the box Play sounds for other mail actions.
Quit Mail.
Relaunch Mail, check the box Play sounds for other mail actions.
Quit and relaunch Mail.
Hope it works.

Setting up Mail for Cox

Hello all,
Has anyone gotten the mail utility to work with the Cox internet provider? Seems as if I'm having problems sending mail. One issue could be is that cox does not require authentication for sending outgoing mail, while the itouch mail setup does not have an option for no authentication.
If anyone has gotten mail to work properly with cox, your settings used would be greatly appreciated. Thanks.

Are you on your own WIFI network using Cox? Or are you on another ISPs network?
Cox does not allow mail being sent from outside it's network. So if you are not on your home WIFI network, you will not be able to send mail. You can still access your webmail for Cox and send when you are on another network.
The reason they do this is to try to avoid SPAM from their servers.
You can read more about this from Cox.net's support website.

Email attachment name in sender mail adapter to the receiver file adapter

HI ,
Ths is regarding email to file scenario. I am trying to create file (in rceiver file adapter) with the same name as the email attachment that i read from mail sender adapter. I want ro use adapter module for this. I could find from blogs that there is module - GetAttachmentName - available that i can use for this in sender mail adapter.
Can you please let me know what whetehr i neeed to mention any module key and parameters for this.
I assume , i need to do following steps :Please confirm.
1. i can use this module - after payload swap module and before standard mail adapter module in sender mail adapter
2. select ASMA option in advanced tab in sender mail adapter
3. In receiver file adapter select ASMA option in advanced tab in sender mail adapter
4. Also select file name option in ASMA in sender mail adapter
Thanks,
Vamsi

Hi Vamsi,
your scenario is also described here: Re: sender mail adapter - attachment name
If you use the Module getAttachmentName, which is described here,
http://wiki.sdn.sap.com/wiki/display/XI/AdapterModulePI7.0GetAttachmentName
your scenario should work as you described it.
You just need to make sure that the Attachment Name that you read in the first place, is mapped to the Filename Attribute of the
Fileadapter (http://sap.com/xi/XI/System/File/FileName).
regards,
Daniel

Cannot get or send mail using Apple Mail on iPhone and iPad

Everyone in my household cannot get or send mail on their Apple Mail for iPad and iPhone. We all get the same message: "The user name or password for [account] is incorrect." This just started happening yesterday afternoon. No problems before that. I called my hosting company and Apple, and both blamed the other. My Apple system is always updated, so I have the latest version of Maverick. Had no problems with it up until now.
However, I awoke this morning to find downloaded emails in the same program, but when I go to "get mail," it says the same thing, and still won't allow me to send or receive.
Here's the kicker. I also use Gmail with the exact same accounts (yes, I need both since Apple Mail does things that Gmail doesn't, and vice versa). No problem! I get all my emails and can send with no problem. So, my hosting company claims it can't be them (makes sense). It only happens using Apple Mail, and I have several email addresses. None of them work (other than the strange phenomena of suddenly getting some of them downloaded for no apparent reason).
What do I do from here? I've changed passwords, deleted and tried to set up my emails, only to get the message that they probably will not work. And they don't. I have shut down and restarted my iPad and iPhone, to no avail.
Thank god for my Gmail account, or my business would be closed.
Again, this is happening on four devices in my home: 2 iPads and 2 iPhones.

I have a comcast account I use on my phone and use it for receiving and sending mail. When you look at the account in settings, you need to check each of these
incoming mail server: mail.comcast.net
username: the part of your email address before the @
password: your password
outgoing mail server: smtp.comcast.net
Under Advanced
Use SSL: On
Authentication: Password
Server Port: 995
If you cannot make it work from changing settings in the account, delete the account and start over. Use the "Other" setting when starting the account. It is a POP3 account and make the entries I gave you. Once you do that, it should check the entries and validate the account. You shouldn't have any trouble from there. Those settings will work from either the iPhone on cell, or wireless. Mine will even work when I'm at home on my wireless there, which is on the Comcast network.
Hope that helps you.

PO creation & send mail

Hai,
I am new to workflow area.
I would like to create workflow for PO creation & send mail. can any body guide me for this?
Any documentation please send me.
With Regards,
Jaheer.

Hi Jaheer,
In Basic Data you have to give the Start Event. For that You Use Standard Bus 2012 and "Changed/Created" Event.
After that, you have to Double click the "Undefined Step Size" and Choose "Send Mail" step Types.
Then Give Any text to the body of the mail and also Give the User Name Who receives the mail.
Save and activate and then Check the mail in Business workplace(sbwp).
Thanks.
Reward If Helpful.

Sender Mail Adapter Transport Protocol as SMTP

Hi,
i am Working with Mail to File Scenario..
Done with Whole Process..
But when i m Sending a mail from SBWP... the mail was sent Successfully sent to the receptint...
But i m not able to see my message in SXMB_MONI ... and when i check in RWB i got the following error at Sender Communication Channel..
Can Anyone help me to fix this Error... what might be the problem ?
1/5/11 1:20:29 PM   mail client job stopped completly
1/5/11 1:16:27 PM   exception caught during processing mail message; java.net.ConnectException: Connection refused: connect
1/5/11 1:11:27 PM   exception caught during processing mail message; java.net.ConnectException: Connection refused: connect
1/5/11 1:06:27 PM   exception caught during processing mail message; java.net.ConnectException: Connection refused: connect
1/5/11 1:06:26 PM   mail client job scheduled

Hi Deepthi,
Try to restart the j2ee engine , Tcode=SMICM by SAP GUI.
hope it works.
Also try to chk themailserver security settings , maybe XI is not able to reach it.
Chk whether theauthentication details for accessing mail box are correct ?
Connection refused this error generally occurs when XI is not able to connect .
maybe some ports are not opened on the firewall
check if the mail server you are trying to access is running.
just chk the below link for Configuring the Sender Mail Adapter :-
http://help.sap.com/saphelp_nw04/helpdata/en/23/c093409c663228e10000000a1550b0/content.htm
Regards,
Rohit

User in france cannot send mail

This is odd. An employee moving through France (we are in UK) cannot send mail via either of our servers. The can collect - no problems. If they come on via one of the VPN systems we have, they can send mail. There is nothing on the log files to suggest there are any problems - e.g. no reject, not even a connect message. They can send email via another service provider which 'suggests' the IP provider they are using is not blocking SMTP. Anyone any ideas?
Here is postconf output
alias_maps = hash:/etc/postfix/aliases
bouncequeuelifetime = 1d
command_directory = /usr/sbin
config_directory = /etc/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
delaywarningtime = 1h
enableserveroptions = yes
html_directory = no
inet_interfaces = all
localrecipientmaps = proxy:unix:passwd.byname $alias_maps
luser_relay =
mail_owner = postfix
mailboxsizelimit = 0
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
mapsrbldomains =
maximalqueuelifetime = 1d
messagesizelimit = 20971520
mydestination = $myhostname,localhost.$mydomain,localhost,clayford.com,mail.clayford.com,moonfa ce.clayford.com
mydomain = clayford.com
mydomain_fallback = localhost
myhostname = server.clayford.com
mynetworks = 127.0.0.1/32,195.27.17.85/32
mynetworks_style = host
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
recipient_delimiter = +
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
showuser_unknown_tablename = no
smtpdclientrestrictions = permit_mynetworks permitsaslauthenticated rejectrblclient zen.spamhaus.org permit
smtpddatarestrictions = permit_mynetworks, rejectunauthpipelining, permit
smtpdhelorequired = yes
smtpdhelorestrictions = permitsaslauthenticated, permit_mynetworks, rejectnon_fqdnhostname, rejectinvalidhostname, permit
smtpdpw_server_securityoptions = login,plain,cram-md5
smtpdrecipientrestrictions = rejectinvalidhostname, permitsaslauthenticated, permit_mynetworks, rejectnon_fqdnrecipient, rejectunauthdestination, rejectrblclient zen.spamhaus.org, permit
smtpdsasl_authenable = yes
smtpdsenderrestrictions = permitsaslauthenticated, permit_mynetworks, rejectnon_fqdnsender, permit
smtpdtls_keyfile =
smtpduse_pwserver = yes
unknownlocal_recipient_rejectcode = 550
unknownvirtual_alias_rejectcode = 550
unknownvirtual_mailbox_rejectcode = 550
virtualaliasdomains = hash:/etc/postfix/virtualaliasdomains
virtualaliasmaps = hash:/etc/postfix/virtual
virtualmailboxdomains = hash:/etc/postfix/virtual_domains
virtual_transport = lmtp:unix:/var/imap/socket/lmtp

The mail server that works is not mine so we don't have access to its settings
Eh? Server? No. Look at the client itself. And at the mail client profiles that are set up to access the mail server. You have a known-working profile within a mail client for one mail server (not yours). And a non-working profile (for yours). Compare the two profiles.
There are a number of a ways a mail client can be configured (ports used for reading and sending mail, which protocols), and (barring cases of an unusually locked-down client) you can usually see the settings for the profile (if not the passwords) for the mail server(s) that the client knows about.
Some ISPs and some businesses can block outbound connections to port 25, for instance.
If you have a profile that works, see if cloning that approach on your own mail server works, or if switching the client over to that connection approach if that path is already enabled on your mail server.

Generic Templates for all customers

Dear experst,
can I use in the PI a generic template for different customers sending messages via PI.
That means the sender is 1 : N customers.
Please advice how we can do it.

hi,
That depends on what it's a "generic" for you and what is exaclty your flow: which receiver adapter ?
but yes you can do it in by adding several receivers in the Receiver Determination... if the receiver CC should be different... that means if receiver folder / filename should be differents (for instance, if it's a file adapter). Always in Receiver Determination you can define a condition for the routing to different receiver, else every time ALL receivers will receive the info.
regards
Mickael

Cox WebMail "Cannot Send Mail"

I have set up my cox.net email account on my iPhone. I can receive emails without any problem. When I try to send a message it does not go through, takes awhile and then displays:
Cannot Send Mail
The connection to the outgoing server "smtp.west.cox.net" failed.
Does anyone know how to slove this problem? I called Cox and they have no idea of what I'm talking about. They told me that since I can send emails through my Cox WebMail account online, everything should be fine.
Thanks,
Charlie K

I called Cox and they have no idea of what I'm talking about. They told me that since I can send emails through my Cox WebMail account online, everything should be fine.
This is usually par for the course in regards to cable companies that are also internet service and email account providers but an FYI - sending messages via webmail access does not use an SMTP server. Although not very common, a provider's SMTP server can be down or having problems which wouldn't prevent sending messages via webmail access but even if both are not working at the same time, these are not related and one working or not working has no bearing on the other.

We purchased a new iPad2 and registered it using a 'new' iCloud email/ID. We are unable to send email from the iPad and iPhone. The error is: Cannot send mail. The user name or password for iCloud is incorrect.

We purchased a new iPad2 and registered it using a 'new' iCloud email/ID. We are unable to send email from the iPad and iPhone. The error is:>> Cannot send mail. The user name or password for iCloud is incorrect.

About ~20 hours later, this ended up solving itself. We can send email using the '.icloud' email from both the iPad and iPhone. Advise would be 'wait' before you start seeking alteranatives like yahoo, hotmail, etc. This definitely is a convenient way to keep all your 'cloud' information in a centralized place, including the common email...

For Cox customers: sending mail

Similar Messages

Maybe you are looking for