For Each Loop for XML Task

Hello Everyone,
Please assist with a step by step guide on how to setup a For Each Loop for XML Task
I'm trying to convert XML to XSLT
I have tried more than 10 times and i just do not know what i am doing wrong - no error, my package just runs for a few seconds but nothing happens
Thanks in advance
Dee

I managed to get my XML to XSLT to work but now when i run my package to import the data into SQL table,
it stops after a few records, i get the following error:
[XML Source [1]] Error: The component "XML Source" (1) was unable to process the XML data. The element "Errors" cannot contain a child element. Content model is text only.
Please assist
Check this:
http://social.msdn.microsoft.com/Forums/en-US/80726e0c-9e85-43ca-87bc-7cf90fd7fb31/xml-source-data-flow-throws-cannot-contain-a-child-element-content-model-is-text-only-error?forum=sqlintegrationservices
Chaos isn’t a pit. Chaos is a ladder. Many who try to climb it fail and never get to try again. The fall breaks them. And some are given a chance to climb, but they refuse. They cling to the realm, or the gods, or love. Illusions. Only the ladder is real.
The climb is all there is.

Similar Messages

Is there any way to use a For Each Loop for each property of an User Defined Type?

Is there any way to use a For Each Loop for each property of an User Defined Type? That would be very handy!
Jorge Barbi Martins ([email protected])

Alas, no, not in VBA.
Regards, Hans Vogelaar (http://www.eileenslounge.com)

"for each" loop - under the hood question

Question about the for each loop. Is it optomized? I think this is a poor use of memory management -
for (int i = 0; i < stop; i++) {
Object obj = new Object();
doSomething(obj);
}And this is the ideal, using the same object -
Object obj = new Object();
for (int i = 0; i < stop; i++) {
doSomething(obj);
}So underneath the hood, which is the for each loop comparable to? I love the syntax, it's very clean-looking in the code, but at the same time I don't want to hurt performance.

Question about the for each loop. Is it optomized? I
think this is a poor use of memory management -
for (int i = 0; i < stop; i++) {
Object obj = new Object();
doSomething(obj);
}And this is the ideal, using the same object -
Object obj = new Object();
for (int i = 0; i < stop; i++) {
doSomething(obj);
}So underneath the hood, which is the for each loop
comparable to? I love the syntax, it's very
clean-looking in the code, but at the same time I
don't want to hurt performance.That depends on YOU. You CANNOT write a for-each loop for the code you provided. A for-each loop requires an Iterable. (I think that's what it requires--it at least requires something to iterate over, not just an index variable as you have.)
Consider the following, however:
Object o1 = new Object();
for (Foo foo : fooList) {
    Object o2 = new Object();
     foo.doStuff(o1, o2);
} It will be equivalent to this:Object o1 = new Object();
for (Iterator iter = foo.iterator(); iter.hasNext();) {
    Foo foo = (Foo)iter.next();
    Object o2 = new Object();
    foo.doStuf(o1, o2);
} How could it be any different? It has to keep the behvior of the "old fashioned" iteration.

Need to access parent elements in nested for-each loop

Hi All,
I have a xslt mapping requirement in which I am completely stuck. The details are as listed below. Please help!
Schema structure is as follows:
Root
Payload
Transaction-123
Loop-LINE
Loop-SDPP
Segment-FSTT
Element-111
Required xslt file structure is:
<xsl:for-each Loop-LINE>
<tns:Item>
<Line-1000>
<Line-2000>
<Line-3000>
<Line-8000>
<xsl:for-each Loop-SDPP>
<xsl:for-each Segment-FSTT[ns0:Element-111 != "A"]>
<SDetails>
</SDetails>
<xsl:for-each Loop-LINE> --------- How to access Loop-LINE element from this for loop????
<tns:Item>
<2000>
<2020>
<2070>
<2150>
</tns:Item>
</xsl:for-each>
</for-each>
</for-each>
</tns:item>
</for-each>
Need help in understanding how can I run a for-each loop for Loop-LINE which is two levels up in the schema tree structure.
Thanks..

Thanks for this answer but I can't obtain the right output with my test case; the multi column must be in the loop as that :
ALPHABETICAL INDEX C1
Alternator .......................................... Feed Pump
Belt Details / Engine Gaskets Sets ..... Flywheel Housing
< NEW PAGE>
INDEX ALPHABETIQUE C2
Alternateur......................................... Culbuteurs
Bloc-Cylindres.................................... Demarreur
Denis

For each loop to print a 3D array

I want to display the elements of my 3d uniform array but after each element I get a "null" also. Any idea why? I've tested with a 2d array and I don't have any problem. Any help is really appreciated.
public class Testari {
     public static void main(String[] args) {
          String[][][] my3DArray = new String[3][2][2];
             my3DArray[0][0][0] = "a"; //3d uniform array
             my3DArray[0][1][0] = "b";
             my3DArray[1][0][0] = "c";
             my3DArray[1][1][0] = "d";
             my3DArray[2][0][0] = "e";
             my3DArray[2][1][0] = "f";
             for(String[][] x : my3DArray) {//for each loop
                  for(String[] y : x){
                       for(String z : y){
                            System.out.println(z + " ");
}

What's 3 x 2 x 2?
How many elements did you explicitly set?
How many elements does that leave with their default value of null?

Loading accdb file using for each loop in to single target table

I have 3 accdb file as below in single folder, in control flow I have created a for each loop to loop through all the below file. In dataflow task I have created oledb source using connection manager to point to first file a1.accdb. I am trying
to load all the file into single below mentioned target table, here It is only loading first file it is not looping through other two file.
This I have tried to load .txt files and csv files it is working perfectly but similarly when I try to load access db file table it is not working, can any one of you help me?
1. a1.accdb contains only one table a1tab ( col1 col2 col3 )
2. a2.accdb contains only one table a2tab ( col1 col2 col3 )
3. a3.accdb contains only one table a3tab ( col1 col2 col3 )
I have a target table with similar structure as source
Target table <TargetTable> Col1 Col2 Col3
aak

Thanks Arthur, please find below response
How do you handle the different table names? Cant we handle it in a similar manner, how we handle the .csv/.txt files with different name and similar structure for sources(multiple files) and target (single table)
Is it good to drop the idea of for each loop and create a separate task for each accdb file? to be loaded to same target table( performance wise etc.. any justification would be helpful)
You must handle the connection string dynamically?
Can you help me with the logic for handling connection string dynamically
aak

For-each loop in OSB

Hi,
I have a senario where i have a varied length XMl is coming to me in response of a service callout, and I need to iterate over it to get the fieldvalue of a particular tag based on its fieldName(e.g FUNCTION_CODE) and assign to a tag of another xml for example
THE XML Coming as response of service callout is
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soapenv:Body>
<getDefaultValueResponse xmlns="http://data.transformation.nab.cz.fc.ofss.com">
<getDefaultValueReturn>
<fieldDefaultValue>F</fieldDefaultValue>
<fieldName>FUNCTION_CODE</fieldName>
</getDefaultValueReturn>
<getDefaultValueReturn>
<fieldDefaultValue xsi:nil="true"/>
<fieldName>PAYMENT_TRANSACTION_ID</fieldName>
</getDefaultValueReturn>
<getDefaultValueReturn>
<fieldDefaultValue xsi:nil="true"/>
<fieldName>CHANNEL_ID</fieldName>
</getDefaultValueReturn>
<getDefaultValueReturn>
<fieldDefaultValue>CR</fieldDefaultValue>
<fieldName>CREDIT_DEBIT_FLAG</fieldName>
</getDefaultValueReturn>
<getDefaultValueReturn>
<fieldDefaultValue xsi:nil="true"/>
<fieldName>BRAND</fieldName>
</getDefaultValueReturn>
<getDefaultValueReturn>
<fieldDefaultValue>001</fieldDefaultValue>
<fieldName>ACCOUNT_STATUS</fieldName>
</getDefaultValueReturn>
<getDefaultValueReturn>
<fieldDefaultValue>Mr</fieldDefaultValue>
<fieldName>NAME_TITLE</fieldName>
</getDefaultValueReturn>
<getDefaultValueReturn>
<fieldDefaultValue>Y</fieldDefaultValue>
<fieldName>MAIL_RETURN_INDICATOR</fieldName>
</getDefaultValueReturn>
<getDefaultValueReturn>
<fieldDefaultValue xsi:nil="true"/>
<fieldName>ENTITY</fieldName>
</getDefaultValueReturn>
<getDefaultValueReturn>
<fieldDefaultValue xsi:nil="true"/>
<fieldName>TRANSACTION_CURRENCY</fieldName>
</getDefaultValueReturn>
<getDefaultValueReturn>
<fieldDefaultValue xsi:nil="true"/>
<fieldName>VERSION</fieldName>
</getDefaultValueReturn>
<getDefaultValueReturn>
<fieldDefaultValue xsi:nil="true"/>
<fieldName>TRANSACTION_RATE</fieldName>
</getDefaultValueReturn>
</getDefaultValueResponse>
</soapenv:Body>
</soapenv:Envelope>
and i want to assign that value to transactionType tag of
<?xml version="1.0" encoding="UTF-8"?>
<tns:sandstonetns xmlns:tns="http://sandstone.response.transactionHistory.app.nab.cz.fc.ofss.com" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://sandstone.response.transactionHistory.app.nab.cz.fc.ofss.com Sandstone_Data_Transaction_History_Response.xsd ">
<tns:listOfTransactions>
<tns:transactions>
<tns:clients>
<tns:clientID>tns:clientID</tns:clientID>
</tns:clients>
<tns:timestamp>2001-12-31T12:00:00</tns:timestamp>
<tns:sequenceNumber>tns:sequenceNumber</tns:sequenceNumber>
<tns:description>tns:description</tns:description>
<tns:amount>0</tns:amount>
<tns:accountNumber>tns:accountNumber</tns:accountNumber>
<tns:debitOrCreditFlag>tns:debitOrCreditFlag</tns:debitOrCreditFlag>
<tns:*transactionType*>tns:transactionType</tns:transactionType>
</tns:transactions>
</tns:listOfTransactions>
<tns:returnResponse>
<tns:returnCode>0</tns:returnCode>
<tns:returnDescription>tns:returnDescription</tns:returnDescription>
</tns:returnResponse>
</tns:sandstonetns>
I want to achieve this using for-each loop...kindly help me as I dont have any idea about how to use for-each loop...

i want to select a the tag fieldValue based on the data in tag fieldName for eg if i iterate over the whole response XML searching for fieldName=FUNCTION_CODE then I whuold get the value 'F' and then I would assign this value 'F' to the transactionType tag of the XML
<?xml version="1.0" encoding="UTF-8"?>
<tns:sandstonetns xmlns:tns="http://sandstone.response.transactionHistory.app.nab.cz.fc.ofss.com" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://sandstone.response.transactionHistory.app.nab.cz.fc.ofss.com Sandstone_Data_Transaction_History_Response.xsd ">
<tns:listOfTransactions>
<tns:transactions>
<tns:clients>
<tns:clientID>tns:clientID</tns:clientID>
</tns:clients>
<tns:timestamp>2001-12-31T12:00:00</tns:timestamp>
<tns:sequenceNumber>tns:sequenceNumber</tns:sequenceNumber>
<tns:description>tns:description</tns:description>
<tns:amount>0</tns:amount>
<tns:accountNumber>tns:accountNumber</tns:accountNumber>
<tns:debitOrCreditFlag>tns:debitOrCreditFlag</tns:debitOrCreditFlag>
*<tns:transactionType>tns:transactionType</tns:transactionType>*
</tns:transactions>
</tns:listOfTransactions>
<tns:returnResponse>
<tns:returnCode>0</tns:returnCode>
<tns:returnDescription>tns:returnDescription</tns:returnDescription>
</tns:returnResponse>
</tns:sandstonetns>

For Each Loop Load Dynamic Excel Files

Hi All,
SSIS 2005
I want to load excel file .xls one at a time files that have different names without having to select the file in the connection manager, every time. So a user can easily place the excel file in the folder and right the sql job and it loads the file data.
The data flow tasks all work when I manually select the excel file, but I am unable to get this to work dynamically.
I have setup a for each loop with multiples data flow tasks and sql tasks to load my data from file.
Variables:
@filename d:\new file\*.xls
For Each Loop:
ForEachFile Enumerator
Folder: d:\new file\
Files: *.xls
Retrieve File Name: Fully Qualified
Variable Mappings:
User::filename (index 0)
Connection Managers:
Excel Connection Manager: Expressions, ConnectionString @[User::filename]
Error Message: Error at new buyer(package name) the connection string format is not valid. it must consist of one or more components of the form X=Y, seperated by semicolons.
Can anyone assist thanks.

You still need the file name variable.
ExcelFilePath is the fully qualified file name of your Excel file. ie. it contains both the path and file name.
e.g. D:\inbox\myExcelFile.xls
All the steps you mentioned are correct, except you need to set the property of ExcelFilePath of the Excel connection to the variable that you map to in the ForEach Loop:
Connection Managers:
Excel Connection Manager: Expressions, ExcelFilePath @[User::filename]
Hope this helps.
~ J.

For Each Loop: Enumerator Configuration In the For each loop Editor Help needed

Hi All,
I have a package that runs and updates a table with everytime someone adds a flat file in the source folder. One of the requirement is to upload files with the following
ACA Flat files will have a naming convention of “ACA_ccyy_<julian date>” : How can I add this?
Under Files this is how I have setup the qualifies "ACA_*.*"
Is there anyway to pass the entire naming convention in the file section? If so how can I ?
Please help?
FM

As you have ACA_*.* set in Files Filter, it will return all the files from the folder which start with ACA_.
You can have one dummy Sequence Container inside FE Loop Container. Connect it to your starting task and do right click on Precedence Constraint and write the expression the way you want by using SSIS functions. If the expression is evaluated to True only
then it will go to the next task.
In this way you can skip Non-ACA files.
Please refer:
SSIS Skip Certain Files in a For Each Loop
- Vaibhav

For Each Loop Issue In SSIS

Hi All,
I have a SSIS Package which unzips the folder and then imports the files and then moves *.zip folders into processed location. If this task is executed as a part of total package its not moving the *.zip folders into processed location, but when we execute
for each loop alone this *.zip folders are moved into processed location. I am unable to figure out the issue here.
ZippedFile variable holds fully qualified file name..
Rohan
Rohan

Can you put a OnPreExec breakpoint on the file system task (Right click on the file system task > Edit Breakpoint... > Select the first (OnPreExec breakpoint) and when the pkg pauses @ the breakpoint, chk the value of the ZippedFle and FilePathDestination
variable values in your Local window (should be available at the bottom of the SSIS window as one of the tabs and you will need to expand the variable tree and find these two variables and their values). Are you seeing the appropriate values here?

For Each Loop container help

I have a package that inserts data from multiple flat files and it also captures the file name from the path. I have qualified in the enumerator to pick only files with *.BID extension from the source folder, However What I want is if there`s a file with
lets say .txt extension after the package is run it should move the incorrect files into another folder and send out an alert email to the team.
How can i capture this kind of functionality
FM

Patrick So I Just tested it again now. So in The Folder .bid files belong but there`s a high risk of getting .277 and .101 only
For Each loop container1 will only Pick .BID files and Archive it
For Each loop Container2 will only look for files with .277 and via system task moves it to a Folder "Error_File_Folder"
For Each loop Container3 will only look for files with .101 and via system task moves it to a Folder "Error_File_Folder"
This is high level of my package
For Each loop container1 will only Pick .BID files and Archive it, for every .BID file thats Archived I am caputring filename via FileName Variable and Inserts into a Table, I have a Data flow Task to Substring the Filename and sends it to a OLE DB
Destination Table.
Rest of the 2 Loop containers are only to grab .277 & .101 Files and just send it to a different folder via System task and alert the user.
I`ve successfully Ran my Package I have 7 .BID Files m 3 .277 and 3 .101 Files.. Everything appears where they need to.
FM

SSIS Help For each Loop Container

I need a little help with this process that I am developing. I am fairly new to SSIS so please bear with me. I have done research online so If I seem limited in my knowledge please apologize me.
Requirement: I have a folder where we will have flat files monthly they could be one or more...
each file will have the following name standard "123456.EEAKQ2.EASDREWA12A.BID".
What I need to do is maintain a table which will have filename and date when it was added to the folder.
I have created a package with the following components "For each loop" which grabs files from a source folder.
This is where I am stuck. I need to grab the file name from the path and insert it into the table.
Can someone help me with this?
Thank you
FM
FM

See similar requirement implemented here
What you need is to declare and use a variable inside for each loop to get filename each time. Then you may use script task to check for pattern within the file for identifying correct files
http://visakhm.blogspot.in/2012/05/package-to-implement-daily-processing.html
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

Inside for-each loop

hi,
I gave one for-each loop inside one row, the table which am using has three columns and two rows, at first row there are column headings and second row first column i started for-each loop and ended end for-each loop at third column. Now I am getting displayed multpile rows for each occurence of elements that is fine but How can I get rid of lines which is occuring between each rows. Is there any way to deal this.
Thanks :)

send me you template and xml to my id in profile.

SSIS For Each Loop Container

Hello All,
I have some files within sub folders. Below is the layout
C:\Source\01012015\Sample_1.csv
C:\Source\01012015\Sample_2.csv
C:\Source\02012015\Sample_1.csv
C:\Source\02012015\Sample_2.csv
C:\Source\03012015\Sample_1.csv
C:\Source\03012015\Sample_2.csv
I want
to copy entire folder contents from source to destination including the sub folders and the files
I am using for each loop container which reads the files form 01012015 folder, is there any way to read
all the files from each and every folder(01012015, 02012015,03012015)?
The destination should be like this.
C:\Archive\01012015\Sample_1.csv
C:\Archive\01012015\Sample_2.csv
C:\Archive\02012015\Sample_1.csv
C:\Archive\02012015\Sample_2.csv
C:\Archive\03012015\Sample_1.csv
C:\Archive\03012015\Sample_2.csv
Thanks, Shyam.

Hi Shyam,
According to your description, you want to copy entire folder contents including the sub folders and the files from source to destination.
Based on my research, we should use Foreach File Container together with File System Task to achieve your requirement. For more details, please refer to the following links:
https://social.msdn.microsoft.com/forums/sqlserver/en-US/4d99ebef-df43-44ad-9794-1d729cbf52e9/ssis-foreach-loop-copy-within-subfolders
http://www.sql-programmers.com/for-each-loop-container.aspx
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Usage of for-each loop inside another for-each loop

Hi All,
I have tried using a for-each loop inside another for-each loop as given below.
<?for-each:G_1?>
<Customer Details>
<?for-each:G_2?>
<Address>
<?end for-each?>
<?end for-each?>
Its not getting inside the second loop.I have referred this link
Re: Loop Question but it didn't help me much.Please let me know if am going wrong somewhere.
Regards,
Sudeep.

Sudeep,
The syntax of the for-each statements looks oke. but you have omitted some question marks after the < and before the >.
Furhermore, there cannot be spaces in XML element names. So, "Customer Details" won't work. Change it to something like: "Customer_Details". Also be reminded that the element names are case-sensitive.
try this:
<?for-each:G_1?>
<?Customer_Details?>
<?for-each:G_2?>
<?Address?>
<?end for-each?>
<?end for-each?>
Regards,
Kevin

For Each Loop for XML Task

Similar Messages

Maybe you are looking for