For Each Loop in Jdev 10.1.2.17.84

Is there anyway of using a for each loop in Jdev 10.1.2.17.84? I get errors for the standard syntax:
for (int item : numbers) {
System.out.println("Count is: " + item); }
Am i missing something?

Okay, i'm on 10.1.3 now and the syntax:
for (int item : numbers) {
System.out.println("Count is: " + item); }
still doesn't work. What am I missing now?
On compile I'm getting:
Error(41,23): ; expected
for the line with for (int item : numbers) {

Similar Messages

How to use for each loop in XSLT when my source is a multilayout file and db

How do I use a for each loop in XSLT when my source is multilayout file and db .
My multilayout file is basically contain 2 kind of data one for employee and another for dependent.
Now my requirement is I want to read each line of data whether it is it is employee or dependent do a join with db and write it in my target file.
eg : File content
1 RichaKumari 311289 TCS INDIA
2 KiarnKumar 456782 BRO RichaKumari 311289 INDIA
2 Ravi 456882 BRO RichaKumari 311289 INDIA
eg : db Content
311289 RichaKumari TCS INDIA Bangalore [email protected]
Now in Final File I need something like this :
1 RichaKumari 311289 TCS INDIA
2 KiarnKumar RichaKumari 311289 TCS INDIA
2 Ravi RichaKumari 311289 TCS INDIA
here 1 and 2 are the identifier which will decide which layout to follow .

Hi,
I think you'll need two nested for-each's... Something like...
<xsl:for-each select="$root/row[layout = 1]">
<xsl:variable name="employee" select="."/>
... write employee ...
<xsl:for-each select="$root/row[layout = 2 and dependentid = $employee/id]">
... write dependent ...
</xsl:for-each>
</xsl:for-each>
Cheers,
Vlad

Loading accdb file using for each loop in to single target table

I have 3 accdb file as below in single folder, in control flow I have created a for each loop to loop through all the below file. In dataflow task I have created oledb source using connection manager to point to first file a1.accdb. I am trying
to load all the file into single below mentioned target table, here It is only loading first file it is not looping through other two file.
This I have tried to load .txt files and csv files it is working perfectly but similarly when I try to load access db file table it is not working, can any one of you help me?
1. a1.accdb contains only one table a1tab ( col1 col2 col3 )
2. a2.accdb contains only one table a2tab ( col1 col2 col3 )
3. a3.accdb contains only one table a3tab ( col1 col2 col3 )
I have a target table with similar structure as source
Target table <TargetTable> Col1 Col2 Col3
aak

Thanks Arthur, please find below response
How do you handle the different table names? Cant we handle it in a similar manner, how we handle the .csv/.txt files with different name and similar structure for sources(multiple files) and target (single table)
Is it good to drop the idea of for each loop and create a separate task for each accdb file? to be loaded to same target table( performance wise etc.. any justification would be helpful)
You must handle the connection string dynamically?
Can you help me with the logic for handling connection string dynamically
aak

How can I enable for-each loop in Creator update 1?

I try to use for-each loop, but I got error message from compiler is
" for-each loops are not supported in -source 1.4. (try -source 1.5 to enable for-each loops)"
How can I switch my source to 1.5.. I am using jdk 1.5. Confusing.
Thanks .
Richard

Hi!
Actually Sun Java Studio Creator doesn't support Java EE 5 projects. If You want to create Java EE 5 project, try to use NetBeans with Visual Web Pack installed.
Thanks,
Roman.

For-each loop in OSB

Hi,
I have a senario where i have a varied length XMl is coming to me in response of a service callout, and I need to iterate over it to get the fieldvalue of a particular tag based on its fieldName(e.g FUNCTION_CODE) and assign to a tag of another xml for example
THE XML Coming as response of service callout is
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soapenv:Body>
<getDefaultValueResponse xmlns="http://data.transformation.nab.cz.fc.ofss.com">
<getDefaultValueReturn>
<fieldDefaultValue>F</fieldDefaultValue>
<fieldName>FUNCTION_CODE</fieldName>
</getDefaultValueReturn>
<getDefaultValueReturn>
<fieldDefaultValue xsi:nil="true"/>
<fieldName>PAYMENT_TRANSACTION_ID</fieldName>
</getDefaultValueReturn>
<getDefaultValueReturn>
<fieldDefaultValue xsi:nil="true"/>
<fieldName>CHANNEL_ID</fieldName>
</getDefaultValueReturn>
<getDefaultValueReturn>
<fieldDefaultValue>CR</fieldDefaultValue>
<fieldName>CREDIT_DEBIT_FLAG</fieldName>
</getDefaultValueReturn>
<getDefaultValueReturn>
<fieldDefaultValue xsi:nil="true"/>
<fieldName>BRAND</fieldName>
</getDefaultValueReturn>
<getDefaultValueReturn>
<fieldDefaultValue>001</fieldDefaultValue>
<fieldName>ACCOUNT_STATUS</fieldName>
</getDefaultValueReturn>
<getDefaultValueReturn>
<fieldDefaultValue>Mr</fieldDefaultValue>
<fieldName>NAME_TITLE</fieldName>
</getDefaultValueReturn>
<getDefaultValueReturn>
<fieldDefaultValue>Y</fieldDefaultValue>
<fieldName>MAIL_RETURN_INDICATOR</fieldName>
</getDefaultValueReturn>
<getDefaultValueReturn>
<fieldDefaultValue xsi:nil="true"/>
<fieldName>ENTITY</fieldName>
</getDefaultValueReturn>
<getDefaultValueReturn>
<fieldDefaultValue xsi:nil="true"/>
<fieldName>TRANSACTION_CURRENCY</fieldName>
</getDefaultValueReturn>
<getDefaultValueReturn>
<fieldDefaultValue xsi:nil="true"/>
<fieldName>VERSION</fieldName>
</getDefaultValueReturn>
<getDefaultValueReturn>
<fieldDefaultValue xsi:nil="true"/>
<fieldName>TRANSACTION_RATE</fieldName>
</getDefaultValueReturn>
</getDefaultValueResponse>
</soapenv:Body>
</soapenv:Envelope>
and i want to assign that value to transactionType tag of
<?xml version="1.0" encoding="UTF-8"?>
<tns:sandstonetns xmlns:tns="http://sandstone.response.transactionHistory.app.nab.cz.fc.ofss.com" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://sandstone.response.transactionHistory.app.nab.cz.fc.ofss.com Sandstone_Data_Transaction_History_Response.xsd ">
<tns:listOfTransactions>
<tns:transactions>
<tns:clients>
<tns:clientID>tns:clientID</tns:clientID>
</tns:clients>
<tns:timestamp>2001-12-31T12:00:00</tns:timestamp>
<tns:sequenceNumber>tns:sequenceNumber</tns:sequenceNumber>
<tns:description>tns:description</tns:description>
<tns:amount>0</tns:amount>
<tns:accountNumber>tns:accountNumber</tns:accountNumber>
<tns:debitOrCreditFlag>tns:debitOrCreditFlag</tns:debitOrCreditFlag>
<tns:*transactionType*>tns:transactionType</tns:transactionType>
</tns:transactions>
</tns:listOfTransactions>
<tns:returnResponse>
<tns:returnCode>0</tns:returnCode>
<tns:returnDescription>tns:returnDescription</tns:returnDescription>
</tns:returnResponse>
</tns:sandstonetns>
I want to achieve this using for-each loop...kindly help me as I dont have any idea about how to use for-each loop...

i want to select a the tag fieldValue based on the data in tag fieldName for eg if i iterate over the whole response XML searching for fieldName=FUNCTION_CODE then I whuold get the value 'F' and then I would assign this value 'F' to the transactionType tag of the XML
<?xml version="1.0" encoding="UTF-8"?>
<tns:sandstonetns xmlns:tns="http://sandstone.response.transactionHistory.app.nab.cz.fc.ofss.com" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://sandstone.response.transactionHistory.app.nab.cz.fc.ofss.com Sandstone_Data_Transaction_History_Response.xsd ">
<tns:listOfTransactions>
<tns:transactions>
<tns:clients>
<tns:clientID>tns:clientID</tns:clientID>
</tns:clients>
<tns:timestamp>2001-12-31T12:00:00</tns:timestamp>
<tns:sequenceNumber>tns:sequenceNumber</tns:sequenceNumber>
<tns:description>tns:description</tns:description>
<tns:amount>0</tns:amount>
<tns:accountNumber>tns:accountNumber</tns:accountNumber>
<tns:debitOrCreditFlag>tns:debitOrCreditFlag</tns:debitOrCreditFlag>
*<tns:transactionType>tns:transactionType</tns:transactionType>*
</tns:transactions>
</tns:listOfTransactions>
<tns:returnResponse>
<tns:returnCode>0</tns:returnCode>
<tns:returnDescription>tns:returnDescription</tns:returnDescription>
</tns:returnResponse>
</tns:sandstonetns>

For each loop not working

My trace statements inside my for each loop won't show.
Please someone check my code. I"m getting no errors in flex
builder. When i debug all vars are holding prober data. Thanks so
much

"essa tkinen" <[email protected]> wrote in
message
news:gr27rt$3sb$[email protected]..
> yes there is data there a commas delimited list of
keywords that are
> catagorys. the selectedCatArray holds at list one
element. I want to
> return true if element is in that list
For one thing, you're going to exit the function in the first
iteration,
because you return the result inside the loop. Return
immediately exits the
function. For another, I'd be tempted to switch it to
something more like
this:
for (var i = 0; i<_item.cats.length; i++) {
var iCat=item.cats
//do your stuff here
I have had really bad luck getting for each in to work the
way I think it
should.
HTH;
Amy

For Each Loop for XML Task

Hello Everyone,
Please assist with a step by step guide on how to setup a For Each Loop for XML Task
I'm trying to convert XML to XSLT
I have tried more than 10 times and i just do not know what i am doing wrong - no error, my package just runs for a few seconds but nothing happens
Thanks in advance
Dee

I managed to get my XML to XSLT to work but now when i run my package to import the data into SQL table,
it stops after a few records, i get the following error:
[XML Source [1]] Error: The component "XML Source" (1) was unable to process the XML data. The element "Errors" cannot contain a child element. Content model is text only.
Please assist
Check this:
http://social.msdn.microsoft.com/Forums/en-US/80726e0c-9e85-43ca-87bc-7cf90fd7fb31/xml-source-data-flow-throws-cannot-contain-a-child-element-content-model-is-text-only-error?forum=sqlintegrationservices
Chaos isn’t a pit. Chaos is a ladder. Many who try to climb it fail and never get to try again. The fall breaks them. And some are given a chance to climb, but they refuse. They cling to the realm, or the gods, or love. Illusions. Only the ladder is real.
The climb is all there is.

For Each Loop

As we know that For Each loop is more easy to use and iterate. I want to ask, is it possible to run for each loop in reverse order?
Please help.
I will be very much thank ful to you.

Sure. did you notice that it's you who defines the
running condition, the initial value and the
(positive or negative) increment?He's talking about the new for loop.
The for-each loop can't do everything the old one can. Try reading this explanation.
http://java.sun.com/j2se/1.5.0/docs/guide/language/foreach.html

For Each loop that iterates in reverse order

Can I use the For Each loop to iterate in reverse order?

Like this:
int[] array=new int[10];
for(int i=array.length-1;i<=0;i--)
int j=array;

"for each" loop - under the hood question

Question about the for each loop. Is it optomized? I think this is a poor use of memory management -
for (int i = 0; i < stop; i++) {
Object obj = new Object();
doSomething(obj);
}And this is the ideal, using the same object -
Object obj = new Object();
for (int i = 0; i < stop; i++) {
doSomething(obj);
}So underneath the hood, which is the for each loop comparable to? I love the syntax, it's very clean-looking in the code, but at the same time I don't want to hurt performance.

Question about the for each loop. Is it optomized? I
think this is a poor use of memory management -
for (int i = 0; i < stop; i++) {
Object obj = new Object();
doSomething(obj);
}And this is the ideal, using the same object -
Object obj = new Object();
for (int i = 0; i < stop; i++) {
doSomething(obj);
}So underneath the hood, which is the for each loop
comparable to? I love the syntax, it's very
clean-looking in the code, but at the same time I
don't want to hurt performance.That depends on YOU. You CANNOT write a for-each loop for the code you provided. A for-each loop requires an Iterable. (I think that's what it requires--it at least requires something to iterate over, not just an index variable as you have.)
Consider the following, however:
Object o1 = new Object();
for (Foo foo : fooList) {
    Object o2 = new Object();
     foo.doStuff(o1, o2);
} It will be equivalent to this:Object o1 = new Object();
for (Iterator iter = foo.iterator(); iter.hasNext();) {
    Foo foo = (Foo)iter.next();
    Object o2 = new Object();
    foo.doStuf(o1, o2);
} How could it be any different? It has to keep the behvior of the "old fashioned" iteration.

For-each loops

while working in jbuilder2005 i want to use for-each loops i see following error;
" for-each loops are not supported in -source 1.2 (try -source 1.5 to enable for-each loops) "
i configured the jdk libraries source to jdk1.5 even then i found problem
do any body know
Message was edited by:
citymodel

What it says: Java 1.2 does not have for-each loops. You configured it to use 1.5, but you also configured the compiler to check for 1.2-code compliance. Read the JBuilder manual or help about how to find and change the setting. It's probably somewhere in the project settings.

For each loop and modification of a LinkedList

When going thourhg my LinkedList with a for each loop, I want to do a modification. I just saw that it cast a ConcurrentModification Exception, so it seems I can't do that.
How should I do then? I don't want to go through all the list each time an object is removed, I want it to restart where it stopped.

Not the best solution but something like thisshould work:
if( linkedList.get(i) == "modification")No: don't compare Strings with the == operator.
http://access1.sun.com/FAQSets/newtojavatechfaq.html#9
You are correct, must be .equals() my bad.

For Each Loop - Urgent

Hi,
I am trying to use a For each loop:
FE Agreement_No
Customer
0.00
0.00<?end for-each?>
This does not work. Does the code FE need to be grouped?
Can anyone help?
Thanks

Hi,
I have created a repeating group:
<?for-each-group:ROW;./Agreement_No?>
This places an F in front of agreement_no field
and places E in front of the following field customer.
I would also like to add a condition where installment = 'Under 1'
Would that be <?for-each-group:ROW;./Agreement_No[../Installments='Under 1']?>

For Each Loop Load Dynamic Excel Files

Hi All,
SSIS 2005
I want to load excel file .xls one at a time files that have different names without having to select the file in the connection manager, every time. So a user can easily place the excel file in the folder and right the sql job and it loads the file data.
The data flow tasks all work when I manually select the excel file, but I am unable to get this to work dynamically.
I have setup a for each loop with multiples data flow tasks and sql tasks to load my data from file.
Variables:
@filename d:\new file\*.xls
For Each Loop:
ForEachFile Enumerator
Folder: d:\new file\
Files: *.xls
Retrieve File Name: Fully Qualified
Variable Mappings:
User::filename (index 0)
Connection Managers:
Excel Connection Manager: Expressions, ConnectionString @[User::filename]
Error Message: Error at new buyer(package name) the connection string format is not valid. it must consist of one or more components of the form X=Y, seperated by semicolons.
Can anyone assist thanks.

You still need the file name variable.
ExcelFilePath is the fully qualified file name of your Excel file. ie. it contains both the path and file name.
e.g. D:\inbox\myExcelFile.xls
All the steps you mentioned are correct, except you need to set the property of ExcelFilePath of the Excel connection to the variable that you map to in the ForEach Loop:
Connection Managers:
Excel Connection Manager: Expressions, ExcelFilePath @[User::filename]
Hope this helps.
~ J.

For Each Loop: Enumerator Configuration In the For each loop Editor Help needed

Hi All,
I have a package that runs and updates a table with everytime someone adds a flat file in the source folder. One of the requirement is to upload files with the following
ACA Flat files will have a naming convention of “ACA_ccyy_<julian date>” : How can I add this?
Under Files this is how I have setup the qualifies "ACA_*.*"
Is there anyway to pass the entire naming convention in the file section? If so how can I ?
Please help?
FM

As you have ACA_*.* set in Files Filter, it will return all the files from the folder which start with ACA_.
You can have one dummy Sequence Container inside FE Loop Container. Connect it to your starting task and do right click on Precedence Constraint and write the expression the way you want by using SSIS functions. If the expression is evaluated to True only
then it will go to the next task.
In this way you can skip Non-ACA files.
Please refer:
SSIS Skip Certain Files in a For Each Loop
- Vaibhav

For Each Loop in Jdev 10.1.2.17.84

Similar Messages

Maybe you are looking for