For each loop using numbers

solved while writing question :)
Edited by: user10966625 on Sep 27, 2010 6:07 AM
Edited by: user10966625 on Sep 27, 2010 6:08 AM

i changed my logic i am using single table that's not the issue.
can u tell me how do i control connections in your code do i need to add any new parameter i need to immediately quit if connection is failed , but right know its taking time before it goes to other server in loop
Function Get-SQLConn{
Param(
$server
Try{
$connStr="Data Source=$server;Integrated Security=true;Initial Catalog=master;"
$conn=new-object Data.SqlClient.SqlConnection($connStr)
$conn.Open()
$conn
Catch{
throw $_
if($conn=Get-SQLConn -server .\sqlexpress){ $conn.Close()}

Similar Messages

How to use for each loop in XSLT when my source is a multilayout file and db

How do I use a for each loop in XSLT when my source is multilayout file and db .
My multilayout file is basically contain 2 kind of data one for employee and another for dependent.
Now my requirement is I want to read each line of data whether it is it is employee or dependent do a join with db and write it in my target file.
eg : File content
1 RichaKumari 311289 TCS INDIA
2 KiarnKumar 456782 BRO RichaKumari 311289 INDIA
2 Ravi 456882 BRO RichaKumari 311289 INDIA
eg : db Content
311289 RichaKumari TCS INDIA Bangalore [email protected]
Now in Final File I need something like this :
1 RichaKumari 311289 TCS INDIA
2 KiarnKumar RichaKumari 311289 TCS INDIA
2 Ravi RichaKumari 311289 TCS INDIA
here 1 and 2 are the identifier which will decide which layout to follow .

Hi,
I think you'll need two nested for-each's... Something like...
<xsl:for-each select="$root/row[layout = 1]">
<xsl:variable name="employee" select="."/>
... write employee ...
<xsl:for-each select="$root/row[layout = 2 and dependentid = $employee/id]">
... write dependent ...
</xsl:for-each>
</xsl:for-each>
Cheers,
Vlad

Loading accdb file using for each loop in to single target table

I have 3 accdb file as below in single folder, in control flow I have created a for each loop to loop through all the below file. In dataflow task I have created oledb source using connection manager to point to first file a1.accdb. I am trying
to load all the file into single below mentioned target table, here It is only loading first file it is not looping through other two file.
This I have tried to load .txt files and csv files it is working perfectly but similarly when I try to load access db file table it is not working, can any one of you help me?
1. a1.accdb contains only one table a1tab ( col1 col2 col3 )
2. a2.accdb contains only one table a2tab ( col1 col2 col3 )
3. a3.accdb contains only one table a3tab ( col1 col2 col3 )
I have a target table with similar structure as source
Target table <TargetTable> Col1 Col2 Col3
aak

Thanks Arthur, please find below response
How do you handle the different table names? Cant we handle it in a similar manner, how we handle the .csv/.txt files with different name and similar structure for sources(multiple files) and target (single table)
Is it good to drop the idea of for each loop and create a separate task for each accdb file? to be loaded to same target table( performance wise etc.. any justification would be helpful)
You must handle the connection string dynamically?
Can you help me with the logic for handling connection string dynamically
aak

Is there any way to use a For Each Loop for each property of an User Defined Type?

Is there any way to use a For Each Loop for each property of an User Defined Type? That would be very handy!
Jorge Barbi Martins ([email protected])

Alas, no, not in VBA.
Regards, Hans Vogelaar (http://www.eileenslounge.com)

Using IF in a for each loop which is grouped by two fields

Hi ,
My requirement is to filter the Payment records ,based on the parameter input date and also group by based on two of the Fields and calculate the sum of the payment Amounts.
I have created a for each loop with the group by first on one field and then the other field.
My question is where should I put my IF condition based on parameter dates ?
If condition would be if Created = Date Parameter .CAn anybody help where I should insert the IF condition in the below code.
Ex:
<?for-each-group:Payments;./Created?>
Display Date : Created
<?for-each-group:current-group();./CreatedByName?>
Table : CreatedByName count of Payments Sum of Amount
<?end for-each-group?>
<?end for-each-group?>
thanks.

Hi ,
I got the result by putting the filter in [ ]
Ex:
<?for-each-group:Payments[PaymentStatus != 'New';./CreatedDate?>
here I am filtering the records based on [Payment Status != New] and then group by Created Date .
Similarly I can new another condition as well in the same statement
<?for-each-group:Payments[PaymentStatus != 'New'][PaymentMethod != 'Cash'];./CreatedDate?>
Regards.

For Each Loop in Jdev 10.1.2.17.84

Is there anyway of using a for each loop in Jdev 10.1.2.17.84? I get errors for the standard syntax:
for (int item : numbers) {
System.out.println("Count is: " + item); }
Am i missing something?

Okay, i'm on 10.1.3 now and the syntax:
for (int item : numbers) {
System.out.println("Count is: " + item); }
still doesn't work. What am I missing now?
On compile I'm getting:
Error(41,23): ; expected
for the line with for (int item : numbers) {

How can I enable for-each loop in Creator update 1?

I try to use for-each loop, but I got error message from compiler is
" for-each loops are not supported in -source 1.4. (try -source 1.5 to enable for-each loops)"
How can I switch my source to 1.5.. I am using jdk 1.5. Confusing.
Thanks .
Richard

Hi!
Actually Sun Java Studio Creator doesn't support Java EE 5 projects. If You want to create Java EE 5 project, try to use NetBeans with Visual Web Pack installed.
Thanks,
Roman.

For-each loop in OSB

Hi,
I have a senario where i have a varied length XMl is coming to me in response of a service callout, and I need to iterate over it to get the fieldvalue of a particular tag based on its fieldName(e.g FUNCTION_CODE) and assign to a tag of another xml for example
THE XML Coming as response of service callout is
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soapenv:Body>
<getDefaultValueResponse xmlns="http://data.transformation.nab.cz.fc.ofss.com">
<getDefaultValueReturn>
<fieldDefaultValue>F</fieldDefaultValue>
<fieldName>FUNCTION_CODE</fieldName>
</getDefaultValueReturn>
<getDefaultValueReturn>
<fieldDefaultValue xsi:nil="true"/>
<fieldName>PAYMENT_TRANSACTION_ID</fieldName>
</getDefaultValueReturn>
<getDefaultValueReturn>
<fieldDefaultValue xsi:nil="true"/>
<fieldName>CHANNEL_ID</fieldName>
</getDefaultValueReturn>
<getDefaultValueReturn>
<fieldDefaultValue>CR</fieldDefaultValue>
<fieldName>CREDIT_DEBIT_FLAG</fieldName>
</getDefaultValueReturn>
<getDefaultValueReturn>
<fieldDefaultValue xsi:nil="true"/>
<fieldName>BRAND</fieldName>
</getDefaultValueReturn>
<getDefaultValueReturn>
<fieldDefaultValue>001</fieldDefaultValue>
<fieldName>ACCOUNT_STATUS</fieldName>
</getDefaultValueReturn>
<getDefaultValueReturn>
<fieldDefaultValue>Mr</fieldDefaultValue>
<fieldName>NAME_TITLE</fieldName>
</getDefaultValueReturn>
<getDefaultValueReturn>
<fieldDefaultValue>Y</fieldDefaultValue>
<fieldName>MAIL_RETURN_INDICATOR</fieldName>
</getDefaultValueReturn>
<getDefaultValueReturn>
<fieldDefaultValue xsi:nil="true"/>
<fieldName>ENTITY</fieldName>
</getDefaultValueReturn>
<getDefaultValueReturn>
<fieldDefaultValue xsi:nil="true"/>
<fieldName>TRANSACTION_CURRENCY</fieldName>
</getDefaultValueReturn>
<getDefaultValueReturn>
<fieldDefaultValue xsi:nil="true"/>
<fieldName>VERSION</fieldName>
</getDefaultValueReturn>
<getDefaultValueReturn>
<fieldDefaultValue xsi:nil="true"/>
<fieldName>TRANSACTION_RATE</fieldName>
</getDefaultValueReturn>
</getDefaultValueResponse>
</soapenv:Body>
</soapenv:Envelope>
and i want to assign that value to transactionType tag of
<?xml version="1.0" encoding="UTF-8"?>
<tns:sandstonetns xmlns:tns="http://sandstone.response.transactionHistory.app.nab.cz.fc.ofss.com" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://sandstone.response.transactionHistory.app.nab.cz.fc.ofss.com Sandstone_Data_Transaction_History_Response.xsd ">
<tns:listOfTransactions>
<tns:transactions>
<tns:clients>
<tns:clientID>tns:clientID</tns:clientID>
</tns:clients>
<tns:timestamp>2001-12-31T12:00:00</tns:timestamp>
<tns:sequenceNumber>tns:sequenceNumber</tns:sequenceNumber>
<tns:description>tns:description</tns:description>
<tns:amount>0</tns:amount>
<tns:accountNumber>tns:accountNumber</tns:accountNumber>
<tns:debitOrCreditFlag>tns:debitOrCreditFlag</tns:debitOrCreditFlag>
<tns:*transactionType*>tns:transactionType</tns:transactionType>
</tns:transactions>
</tns:listOfTransactions>
<tns:returnResponse>
<tns:returnCode>0</tns:returnCode>
<tns:returnDescription>tns:returnDescription</tns:returnDescription>
</tns:returnResponse>
</tns:sandstonetns>
I want to achieve this using for-each loop...kindly help me as I dont have any idea about how to use for-each loop...

i want to select a the tag fieldValue based on the data in tag fieldName for eg if i iterate over the whole response XML searching for fieldName=FUNCTION_CODE then I whuold get the value 'F' and then I would assign this value 'F' to the transactionType tag of the XML
<?xml version="1.0" encoding="UTF-8"?>
<tns:sandstonetns xmlns:tns="http://sandstone.response.transactionHistory.app.nab.cz.fc.ofss.com" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://sandstone.response.transactionHistory.app.nab.cz.fc.ofss.com Sandstone_Data_Transaction_History_Response.xsd ">
<tns:listOfTransactions>
<tns:transactions>
<tns:clients>
<tns:clientID>tns:clientID</tns:clientID>
</tns:clients>
<tns:timestamp>2001-12-31T12:00:00</tns:timestamp>
<tns:sequenceNumber>tns:sequenceNumber</tns:sequenceNumber>
<tns:description>tns:description</tns:description>
<tns:amount>0</tns:amount>
<tns:accountNumber>tns:accountNumber</tns:accountNumber>
<tns:debitOrCreditFlag>tns:debitOrCreditFlag</tns:debitOrCreditFlag>
*<tns:transactionType>tns:transactionType</tns:transactionType>*
</tns:transactions>
</tns:listOfTransactions>
<tns:returnResponse>
<tns:returnCode>0</tns:returnCode>
<tns:returnDescription>tns:returnDescription</tns:returnDescription>
</tns:returnResponse>
</tns:sandstonetns>

For Each Loop

As we know that For Each loop is more easy to use and iterate. I want to ask, is it possible to run for each loop in reverse order?
Please help.
I will be very much thank ful to you.

Sure. did you notice that it's you who defines the
running condition, the initial value and the
(positive or negative) increment?He's talking about the new for loop.
The for-each loop can't do everything the old one can. Try reading this explanation.
http://java.sun.com/j2se/1.5.0/docs/guide/language/foreach.html

For Each loop that iterates in reverse order

Can I use the For Each loop to iterate in reverse order?

Like this:
int[] array=new int[10];
for(int i=array.length-1;i<=0;i--)
int j=array;

"for each" loop - under the hood question

Question about the for each loop. Is it optomized? I think this is a poor use of memory management -
for (int i = 0; i < stop; i++) {
Object obj = new Object();
doSomething(obj);
}And this is the ideal, using the same object -
Object obj = new Object();
for (int i = 0; i < stop; i++) {
doSomething(obj);
}So underneath the hood, which is the for each loop comparable to? I love the syntax, it's very clean-looking in the code, but at the same time I don't want to hurt performance.

Question about the for each loop. Is it optomized? I
think this is a poor use of memory management -
for (int i = 0; i < stop; i++) {
Object obj = new Object();
doSomething(obj);
}And this is the ideal, using the same object -
Object obj = new Object();
for (int i = 0; i < stop; i++) {
doSomething(obj);
}So underneath the hood, which is the for each loop
comparable to? I love the syntax, it's very
clean-looking in the code, but at the same time I
don't want to hurt performance.That depends on YOU. You CANNOT write a for-each loop for the code you provided. A for-each loop requires an Iterable. (I think that's what it requires--it at least requires something to iterate over, not just an index variable as you have.)
Consider the following, however:
Object o1 = new Object();
for (Foo foo : fooList) {
    Object o2 = new Object();
     foo.doStuff(o1, o2);
} It will be equivalent to this:Object o1 = new Object();
for (Iterator iter = foo.iterator(); iter.hasNext();) {
    Foo foo = (Foo)iter.next();
    Object o2 = new Object();
    foo.doStuf(o1, o2);
} How could it be any different? It has to keep the behvior of the "old fashioned" iteration.

For-each loops

while working in jbuilder2005 i want to use for-each loops i see following error;
" for-each loops are not supported in -source 1.2 (try -source 1.5 to enable for-each loops) "
i configured the jdk libraries source to jdk1.5 even then i found problem
do any body know
Message was edited by:
citymodel

What it says: Java 1.2 does not have for-each loops. You configured it to use 1.5, but you also configured the compiler to check for 1.2-code compliance. Read the JBuilder manual or help about how to find and change the setting. It's probably somewhere in the project settings.

For Each Loop - Urgent

Hi,
I am trying to use a For each loop:
FE Agreement_No
Customer
0.00
0.00<?end for-each?>
This does not work. Does the code FE need to be grouped?
Can anyone help?
Thanks

Hi,
I have created a repeating group:
<?for-each-group:ROW;./Agreement_No?>
This places an F in front of agreement_no field
and places E in front of the following field customer.
I would also like to add a condition where installment = 'Under 1'
Would that be <?for-each-group:ROW;./Agreement_No[../Installments='Under 1']?>

For Each Loop: Enumerator Configuration In the For each loop Editor Help needed

Hi All,
I have a package that runs and updates a table with everytime someone adds a flat file in the source folder. One of the requirement is to upload files with the following
ACA Flat files will have a naming convention of “ACA_ccyy_<julian date>” : How can I add this?
Under Files this is how I have setup the qualifies "ACA_*.*"
Is there anyway to pass the entire naming convention in the file section? If so how can I ?
Please help?
FM

As you have ACA_*.* set in Files Filter, it will return all the files from the folder which start with ACA_.
You can have one dummy Sequence Container inside FE Loop Container. Connect it to your starting task and do right click on Precedence Constraint and write the expression the way you want by using SSIS functions. If the expression is evaluated to True only
then it will go to the next task.
In this way you can skip Non-ACA files.
Please refer:
SSIS Skip Certain Files in a For Each Loop
- Vaibhav

SQL Agent Permssions With SSIS for each loop not looping through files

Hi I am Having trouble getting a ssis package to iterate through a file directory using a proxy account set up in Sql Server.
So I have a package that loops over csv files. If I run the package manually or set the sql agent job to run as Sysadmin the pakage runs fine all files are processed.
However if I use the proxy account. the package completes but no files are processed. there are no failures, there is no error handling set up in the control flow. the for each loop container simply does not recognise any files when run under a proxy.
Note: the proxy is set up with credentials to access the folder. the credential is also set up with the server admin server role... still nothing
i'm not sure is this is a ssis or permissions problem?
Any comments will be appreciated

Can you check this and see if you've configured all the steps correctly
http://www.mssqltips.com/sqlservertip/2163/running-a-ssis-package-from-sql-server-agent-using-a-proxy-account/
Also enable logging in package and see if you're getting any error messages obtained in output table/file based on the logging option you chose.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

For each loop using numbers

Similar Messages

Maybe you are looking for