For everybody with a N96 and stuck at firmware ver...

Hello everybody
As some n96 users know the phone had lots of bugs and was working very slow. I went to a Nokia Care Point because I wanted everything fixed. I couldn't update to version 12 via my cellphone, but at the care point they had a dongle and they could install the new firmware.
So if your phone has version 11 with the bugs and you want to have new firmware but can't do it via the phone: go to a care point!
Version 12 is very stable, overall performance is increased, and nowadays, I just have to do a total reboot only a few times a day instead of a few times an hour ;-)
I really hope Nokia will not release the n97 without checking every bug first!!!

Gdgmacguy : my friend , i tried all basics soft reset, hard reset on my iphone 4s..the phone is not booting at all its stuck red battery screen..even itunes is not recognising the device...
My other concern is, i started to use my spare iphone 3gs after my 4s gt dead..but 3gs is also showing same symptoms..randomn switch off and will boot only once conected to charger with plenty of charge..i tried to restore, reset on this device..im afraid it might crash as welll...so need a solution..

Similar Messages

  • Important! search function for everybody with old version 5G ipod video

    Hey everybody. A lot of people want to have a search function on their old version ipod video, as do i. But an update fixing the problem is not in the apple planning. So i called tech support and they made a request to apple for me, telling them that such an update is wanted. But they won`t act on it until they have enough requests. So i`m asking everybody with this problem, and perhaps also people who just want to help, to call tech support (not the apple store) and make a request to apple for them to make this update. If a lot of people do this hopefully we`ll get the update!

    You can send feedback to Apple here;
    http://www.apple.com/feedback/ipod.html
    I don't know if the can or will add this feature, but
    it doesn't hurt to make the suggestion using the
    proper feedback channels.
    Cheers!
    -Bryan
    Good idea.. I'll do this.
    thanks.

  • Partitioning an External 320gb drive for use with Time Machine and...

    I want to be able to use my Western Digital 320GB external drive for use with Time Machine and to use as extra storage space on both my Mac and when I boot into Windows Vista.
    Is this possible?
    I was playing around in Disk Utility and would I partition the part I want to use for Time Machine with the Mac OS Journaled, and whatever I want as space for windows, use a MS - DOS format?
    Has anyone done this before?
    Cheers-

    Unless you are using 64 bit version of MSWindows (64 bit XP/Vista), it won't be able to handle a disk with GUID partition table (GPT). Disks with Apple Partition Map (APM) or GUID partition table are the only ones that Time Machine will work with (not MBR disks). Note also that the MBR/APM/GPT are at the DISK level and not the partition level, so don't mix the format with partitioning scheme. Time Machine disks are meant to live in the Mac universe (for now, anyway) and sharing with the MSWindows 32-bit universe is not possible.
    See http://img87.imageshack.us/my.php?image=macpcdiskdd06sv8.png for some additional background.

  • What's the phone number I should call for help with my iPhone and ihome dock?

    What's the phone number I should call for help with my iPhone and ihome dock?

    http://www.ihomeaudio.com/support/

  • Which iMac for use with Photoshop CS5 and Lightroom

    Any opinions on which iMac is best for use with Photoshop CS5 and Lightroom. Not sure if the 2.7 i5 with 512 graphics card is Plenty of power or if upgrading to the 3.1 i5 or 3.4 i7 is a wiser choice given the price differences. Appreciate the help

    So I was reading over your post, and even though this is older and has to do with CS5, I have some information for CS6 that will be relevant to your question now that it is time to upgade the software. In general Photoshop has always been more about RAM than Processing power, though that is important too. Until CS5 it could never quite take advantage of what multi-core processors really had to offer, and even the graphics card didn't really effect much of it outside of certain features and the 3D optio
    Now that is no longer true and Adobe can effeciently use all aspects of the computer to give you much better performance.
    So much so that I was able to buy a brand New ASUS with the following specs:
    Dual Core 2.2GHz Processors
    8GB of RAM (4GB original to the machine)
    Windows 7 Home Premium 64Bit OS
    320GB HDD w/ 5400RPM
    This machine not only runs photoshop CS6 and Launches in less than 5 Seconds... it can run Premier and After Effects as well, and this Laptop cost me less than $400 (on sale at Best Buy 2 Weeks Ago. You don't have to buy something this cheap, but isn't it great that you can and still run Master Collection effectively?
    You can read my details on how to buy a Photoshop CS6 Laptop, what specs you need, comparison between Mac and PC and watch the video of my Photoshop Speed Test by reading this article:
    http://robertoblake.com/blog/2012/06/buying-a-photoshop-cs6-laptop

  • Free webinar: Creative Cloud for Photography with Ps CC and Lr5

    Creative Cloud for Photography with Photoshop CC and Lightroom 5
    Friday, June 21, 2013 | 12:00 PM PT
    Presented by: Julieanne Kost
    http://www.adobe.com/cfusion/event/index.cfm?event=detail&id=2008488&loc=en_us
    Join Julieanne Kost, Principal Digital Imaging Evangelist, as she demonstrates new features in Photoshop CC and Lightroom 5, as well as sharing and collaboration features of Adobe Creative Cloud. In this Ask A Pro session, you will:
    Learn how Creative Cloud brings additional capabilities to your workflow with Sync Settings, Sync Fonts, and sharing with Creative Cloud
    See new features in Photoshop CC to enable more advanced sharpening than ever before with all-new Smart Sharpen, intelligent upsampling, and Camera Shake Reduction.
    Learn how to perfect your images using the new Upright and Advanced Healing Brush in Adobe Camera Raw 8 and Lightroom 5
    See how to customize your photo books in the updated Book module in Lightroom 5
    Share your images with the leading online platform to showcase and discover creative work using Share to Behance from within Photoshop CC

    http://blogs.adobe.com/jkost/2013/06/creative-cloud-for-photographers-with-photoshop-cc-an d-lightroom-5.html

  • Going for fun with x-men and godzilla at cinemas

    Going for fun with x-men and godzilla at cinemas, yeah i planned to watch both movie on cinema today but i cancelled because finally i found a real working link for both movie, and of course i watch another movies from same site, check the movie list that
    i watch it today online.enjoy!
    [url=http://www.pvlt.co.uk/kunena/welcome-mat/6202-watch-the-other-woman-online-free-streaming-2014]Watch The Other Woman Online Free Streaming 2014[/url]
    [url=http://blogs.atkins.com/Blogs/sukasorosi/Archive/2014/5/27/260413.aspx]((Putlocker)) Watch The Other Woman Online Free 2014 Full Movie Stream[/url]
    [url=http://l2inception.com/forum/viewtopic.php?f=6&t=58390]Megashare> Watch The Other Woman Online Free 2014 Putlocker[/url]
    [url=http://wayne.patch.com/groups/enews/p/putlocker-watch-the-other-woman-online-free-2014-full-movie-stream]+Putlocker+ Watch The Other Woman Online Free 2014 Full Movie Stream[/url]
    [url=http://www.pvlt.co.uk/kunena/welcome-mat/6205-watch-x-men-days-of-future-past-online-free-2014]Watch X-Men Days of Future Past Online Free 2014[/url]
    [url=http://blogs.atkins.com/Blogs/sukasorosi/Archive/2014/5/27/260416.aspx]((Putlocker)) Watch X-Men Days of Future Past Online Free 2014 Full Movie Stream[/url]
    [url=http://l2inception.com/forum/viewtopic.php?f=6&t=58413]Watch X-Men Days of Future Past Online Free 2014 [Putlocker][/url]
    [url=http://wayne.patch.com/groups/enews/p/putlocker-watch-xmen-days-of-future-past-online-free-2014-full-movie-stream]+Putlocker+ Watch X-Men Days of Future Past Online Free 2014 Full Movie Stream[/url]
    [url=http://www.pvlt.co.uk/kunena/welcome-mat/6211-watch-godzilla-2014-online-free-putlocker-stream]Watch Godzilla (2014) Online Free Putlocker Stream[/url]
    [url=http://blogs.atkins.com/Blogs/sukasorosi/Archive/2014/5/27/260433.aspx]((Putlocker)) Watch Godzilla Online Free 2014 Full Movie Stream[/url]
    [url=http://l2inception.com/forum/viewtopic.php?f=6&t=58458]Megashare> Watch Godzilla Online Free 2014 Putlocker[/url]
    [url=http://wayne.patch.com/groups/enews/p/putlocker-watch-godzilla-online-free-2014-full-movie-stream]+Putlocker+ Watch Godzilla Online Free 2014 Full Movie Stream[/url]
    [url=http://www.pvlt.co.uk/kunena/welcome-mat/6228-watch-neighbors-online-free-2014-putlocker-stream]Watch Neighbors Online Free 2014 Putlocker Stream[/url]
    [url=http://blogs.atkins.com/Blogs/sukasorosi/Archive/2014/5/27/260437.aspx]((Putlocker)) Watch Neighbors Online Free 2014 Full Movie Stream[/url]
    [url=http://l2inception.com/forum/viewtopic.php?f=6&t=58504]Megashare> Watch Neighbors Online Free 2014 Putlocker[/url]
    [url=http://wayne.patch.com/groups/enews/p/putlocker-watch-neighbors-online-free-2014-full-movie-stream]+Putlocker+ Watch Neighbors Online Free 2014 Full Movie Stream[/url]
    [url=http://www.pvlt.co.uk/kunena/welcome-mat/6246-watch-the-amazing-spider-man-2-online-free-2014]@Watch The Amazing Spider Man 2 Online Free 2014[/url]
    [url=http://blogs.atkins.com/Blogs/sukasorosi/Archive/2014/5/27/260448.aspx]((Putlocker)) Watch The Amazing Spider Man 2 Online Free 2014 Full Movie Stream[/url]
    [url=http://l2inception.com/forum/viewtopic.php?f=6&t=58546]Megashare> Watch The Amazing Spider Man 2 Online Free Stream[/url]
    [url=http://wayne.patch.com/groups/enews/p/putlocker-watch-the-amazing-spider-man-2-online-free-2014-full-movie-stream]+Putlocker+ Watch The Amazing Spider Man 2 Online Free 2014 Full Movie Stream[/url]

    % Looks like the Windows 7 Upgrade Advisor is still a POS, and still beta. Yes your card will work with 7. Most are using this,
    http://forums.creative.com/t5/Sound-...09/td-p/527485
    with little to no problems (more no) on 7. I know that my Xtreme Music is working just fine in 7 x64.

  • Settings for PHP5 With Apache 2  and SAPRFC in WIndows

    Hi,
    Can anyone give me the exact version of software that needed for the settings for PHP5 with Apache 2 and SAPRFC in Windows.Thank you

    If it's just a test/dev environment you need you can try "<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn?rid=/library/uuid/e50bd86e-0a01-0010-53bd-857585234a6a">scripting in a Box</a>" it also lists the versions and pieces needed for the setup you are looking for.

  • Can anyone recommend a good printer for working with an iMac and a MacBook Pro wirelessly?

    Can anyone recommend a good printer for working with an iMac and a MacBook Pro wirelessly?

    canon pixma 6200 series works

  • Jabber 9.6 no voicemail tab for CUC with CUCM 9 and CUC 8.6

    Hi guys,
    I have Jabber 9.2 and 9.6 clients with CUCM 9.1.2, CUC 8.5.1 and Cisco IM + P 9.1.1.
    We've recently updated the CUCM and CUPS to Cisco IM+P.  Also we have migrated from CUPC Clients to Jabber clients.  The CUC server has remained as is.  I was able to get the CUPC clients to get voicemail/visual voicemail but the Jabber client doesn't even display an ico for voicemail. 
    The service profile for all users is set correctly to point to the CUC server and there's no errors when I go to the jabber client "show connction status".  
    I haven't been able to find much about this issue.  I have noticed that if I set the mail store the voicemail tab appears but we are not using a mail store as the voicemail repositary.  Is this now required to check voicemail?  If so can someone point me to the configuration guide?  We have exchange 2012.  Thanks very much!
    -Akin

    Hi every body,
    I  have some problems but not with all the users, is only working with 3  users and the rest of them don't work, I attached the errors that I get  when I try to log in Telephony Accounts in the Jabber, I used the Jabber  of one User, and from here I introduce my credentials (user and  password) and I can get the voice mails (only from de 3 users that is  woriking fine), but when I introduce the credentials of the other user I  get the error and Can't get the voicemails.
    The 127.23.0.7 is the IP address of the Cisco Unity Connection.
    Please Help Me I'm stuck with this!

  • Is there a way to set up browse sequences for project with multiple TOCs and conditionalized modules

    I'm using RoboHelp 9 with WebHelp output.
    I've got five outputs, one of which contains Help for common functions, while the other four contain Help for licensed modules. When a user opens the Help for a licensed module, the user sees the core Help and the licensed Help. In addition, files are conditionalized so that searching for unlicensed content from a licensed Help module brings up nothing.
    I've been troubleshooting problems with the Previous Topic and Next Topic which, thanks to William, I learned are related to browse sequences. After trying assorted configurations, I've got a couple of questions:
    Does RH support only a single browse sequence in a project, even when the project has multiple outputs & TOCs?
    If RH supports only a single browse sequence, does that mean there is no way to create a unique browse sequence for each separate output?
    If RH supports multiple browse sequences, what is the workflow?
    I also maintain a 'master' TOC that contains all the modules, both common and unlicensed. What I've done for now is to autocreate a browse sequence based on the 'master TOC'. When I generate output for a licensed module, which is conditionalized, I only see the TOC for that module and, therefore, can only browse between books and subbooks in that module. I've also verified that topics that do not appear in the conditionalized module, such as for another licensed module, do not appear in the Search results list either.
    Carol

    Me again, Carol
    You also asked about the functional differences between WebHelp and WebHelp Pro, so let me elaborate.
    I'm aware of only two major differences (other than the extra benefits of feedback analytics reports and management of "Areas" with authentication in RoboHelp Server).
    The behavior of Browse Sequences as explained above
    The fact that Content Categories are not supported in WebHelp Pro for this latest version 9.
    As for the Browse Sequences you are trying to provide for different modules (licensed, etc.): Multiple Browse Sequences are included in a single .BRS file. The sequences are defined in the XML within the single file.
    As a workaround (for either WebHelp or WebHelp Pro) you could create a NGP Help.brs. which you have already created for one module; then backup and archive it. Then, create a modification for the different module before you generate again. The NGP Help.brs. will need to have the same name as your project so you will have to manage the desired .brs file into the project folder when you generate that version. All of your other choices (TOC, Index, Conditional Tags, etc.) would remain the same for the respective modules.
    Finally, I note that you are apparently generating WebHelp Pro right now even though you are not publishing it to the RH Server? This is really not the best practice. You should generate plain WebHelp for a web server that does not have RH Server on it (even though you may be getting away with it). As for your concern about "breaking" something; each output is placed in a different !SSL! folder automatically when you generate, so you should be able to generate WebHelp without interferring with the WebHelp Pro output. Then, you can re-publish to the RH Server using WebHelp Pro whenever the server is ready.
    John Daigle
    Adobe Certified RoboHelp and Captivate Instructor
    Evergreen, Colorado
    www.showmethedemo.com

  • Best practice for dealing with Recordsets, JDBC and JSP?

    I've spent the last three years developing web apps using JSP, Struts and Kodo JDO for persistence. All of the content for the apps was created as Java objects using model classes and saved to an Oracle db. Thus, data retrieved from the db was as instances of the model classes and then put into Struts form beans, etc.
    I changed jobs last month and am now having to use Servlets with JDBC to retrieve records from db tables and returning it into Recordsets. Oh, and I can't use Struts in my JSPs either. I'm beginning to think that I had it easy at my previous job but maybe that's just because I was used to it.
    So here are my problems/questions:
    I have two tables with a one to many relationship that I need to retrieve data from, show in a jsp and be able to update eventually.
    So here's what I am doing:
    a) In a servlet, I use a SQL statement to join the tables and retrieve the results into a Recordset.
    b) I created a class with a bunch of String attributes to copy the Recordset data into, one Recordset row per each instance of the bean and then close the Recordset
    c) I then add the beans to an ArrayList and save the ArrayList into the session.
    d) Then, in the JSP, I retrieve the ArrayList from the session and iterate over each bean instance, printing the data out to the jsp. There are some logic statements to determine when not to print redundant data caused by the one to many join.
    e) I have not written the code to update the data yet but was planning on having separate jsps for updating the (one) table and the (many) table.
    Would most of you do something similar? Would you use one SQL statement to retrieve all of the data for display and use logic to avoid printing the redundant part of the data? Or would you have used separate SQL queries, one for each table? Would you have saved the results into something other than an instance of a bean class that represents one record in the RecordSet? Would you have had a bean class with attributes other than Strings - like had a collection attribute to hold the results from the "many" table? The way that I am doing everything just seems so cumbersome and difficult compared to using Struts and JDO before.
    Your help/opinion will be greatly appreciated!

    Would you use one SQL statement to retrieve all of the data for display Yes.
    and use logic to avoid printing the redundant part of the dataNo.
    I believe in minimising the number of queries. If it is a simple one-many join on a db table, then one query is better than one + n queries.
    However I prefer to store the objects in a bean class with attributes other than strings - ie one object, with a collection attribute to hold the related "many" records.
    Does the fact you are not using Struts mean that you have to use scriptlet code? (shudder)
    Or are you using JSTL, or other custom tags?
    How about tools like Ant? Junit testing?
    The way that I am doing everything just seems so cumbersome and difficult
    compared to using Struts and JDO before.Anything different takes adjusting to. Sounds like you know what you're doing for the most part. I agree, in terms of best practices what you have described so far sounds like a step backwards from what you were previously doing.
    However I wouldn't go complaining about it too loudly, too quickly. If you're new on the block theres nothing like making a pain of yourself, and complaining how backwards the work they have done is to put your new workmates' backs up
    Look on it as a challenge. Maybe discuss it quietly with a team leader, to see if they understand how much easier/better/less error prone such approaches can be?
    Struts, cumbersome as it can be, definitely has the advantage of pushing you to follow good MVC practice.
    Good luck,
    evnafets

  • Problem-Starting InDesign Server for use with CORBA / Java and IOR file not generated

    I'm trying to start Indesign Server cs3 for use with Corba, as per the document the server should generate the start-up message like this..
    InDesignServer -iorfile c:\ior.txt -pluginpath Server\Corba
    [server] Writing IOR to ... and it should generate the IOR file
    but I'm getting the usual start-up message and the IOR file is not generated, I hope IOR file is required for Java component interaction with IDS, kindly help me to solve this.
    Thanks in advance.

    [From Susan Doan, who is having trouble posting to the forum today}:
    It looks like the example command line in the "Intro to InDesign Server" pdf is using curly quotes instead of straight quotes. If you copy the command from the pdf and paste it in your command shell, it won't work because of the curly quotes.
    You can run the command without the quotes as Rich has said, but, as will all command lines, if your path contains a space, you will need to put quotes (straight ones!) around the path.
    Thanks,
    Ole

  • Installing linux O.S. for working with IAS 10gR2 and DB11g

    Hi all.
    I have a Dell server with linux enterprise 5.5, but I want to re install all, reformat ,
    because I need to learn how to.
    how decide which O.S install if I will use it with IAS 10g and Database 11g ?
    best regards

    toga wrote:
    Hi all.
    I have a Dell server with linux enterprise 5.5, but I want to re install all, reformat ,
    because I need to learn how to.
    how decide which O.S install if I will use it with IAS 10g and Database 11g ?
    best regardsInstall the OS the product you have is certified for.
    Or install the product that is certified for the OS you have.

  • Ask for help with LabView Daq and Tek VX4244 VX4101

    I use NI VIO-MXI-64XE-10, Tek VX4101 and Tek VX4244 to acquire data in one
    Tek 1410A VXI mainframe connected a PII 350/64M computer with MXI2
    cable.these modules are used for three independent applications,the datum
    are acquired and through preliminary computation, then sent to three TCP/IP
    ports the computer served in real time. the burden of the system will be
    very heavy because the 64XE-10 need to use up the 100K sample rate
    continuously dealed by 50 channels,and the VX4244 need about 30Hz for all 16
    channels.
    64XE-10 is easily detected by NI software, and I can use LabView Daq
    intermediate analog input VIs to acquire data in background, read 50 samples
    and compute the mean for each channel,then packa
    ge the 50 mean and send to
    client end with 40 times a second. I found the speed is satisfactory.
    As for VX4244 and VX4101,I can't use LabView Daq VIs,and the driving
    functions for LabView with the product are difficult to understand, I want
    to know how I can get data and send out efficiently,how to get data in
    background,and how to use FDC ?
    And for 64XE-10, although the speed is satisfactory, but it use much more
    CPU resource, I want to use advanced analog input VIs to build the code,I
    want to know where I can find examples using the advanced analog input VIs ?
    Best Regards

    I use NI VIO-MXI-64XE-10, Tek VX4101 and Tek VX4244 to acquire data in one
    Tek 1410A VXI mainframe connected a PII 350/64M computer with MXI2
    cable.these modules are used for three independent applications,the datum
    are acquired and through preliminary computation, then sent to three TCP/IP
    ports the computer served in real time. the burden of the system will be
    very heavy because the 64XE-10 need to use up the 100K sample rate
    continuously dealed by 50 channels,and the VX4244 need about 30Hz for all 16
    channels.
    64XE-10 is easily detected by NI software, and I can use LabView Daq
    intermediate analog input VIs to acquire data in background, read 50 samples
    and compute the mean for each channel,then packa
    ge the 50 mean and send to
    client end with 40 times a second. I found the speed is satisfactory.
    As for VX4244 and VX4101,I can't use LabView Daq VIs,and the driving
    functions for LabView with the product are difficult to understand, I want
    to know how I can get data and send out efficiently,how to get data in
    background,and how to use FDC ?
    And for 64XE-10, although the speed is satisfactory, but it use much more
    CPU resource, I want to use advanced analog input VIs to build the code,I
    want to know where I can find examples using the advanced analog input VIs ?
    Best Regards

Maybe you are looking for