For few devices Meter Read order 09 information created automatically.

Hi,
In our one of the clients ISU system for EVC meters two Information read Orders are automatically created few days before every 01 order creation for the particular device.  Please provide the information due to what the Information Read order 09 is created .
With Regards

Check Meter control group is filled in register data of device. Control group allows to create multiple meter reading order in between periodic billing with meter reading reason
09.Please make control data blank from device modification transaction if
interim meter reading order is not required.
Thanks,
Laxmi.

Similar Messages

  • Automatic creation of meter reading order with RR 01 after move in

    Hi Experts,
    I am working with DM module of SAP ISU. Currently I am facing a problem that after move-in a periodic order with RR 01 is created automatically by the system.
    Ex: Move in date is 01.01.2010. Monthly Portion is used with Schedule record 01.01.2010, 01.02.2010, 01.03.2010, 01.04.2010 and so on.
    If current system date is 20.07.2010 then Meter reading order is created automatically by the system for sch MRD 01.08.2010.
    Please let me know how to overcome this problem
    Thanks in advance.

    Thanks for your reply but I have cheked SPRO setting the suggested check box is already uncheked.
    I beleive the setting you have suggested is meant for default meter reading during move in but my problem is automatic creation of meter reading order with reason 01 during move in

  • Move in -Move out  and Aperiodic meter reading order, No auto service Ord

    Hi ISU Experts,
    I have a following problem in ISU,
    When create a Move In or a Move out, the system should automatically create a Meter read Order and a Service Order in the Background.
    Same case  is applicable for the Aperiodic meter read order, whenever I create a Aperiodic meter read order, the system should create a service order/ notification automatically in the background,
    As mentioned above, In both the cases no service order/notifications is getting cretaed.
    I have maintained the SPRO settings for Aperiodic meter reading and for Move in and Move out , the service order creation checkbos is checked.
    Please anybody can throw some light, help me out what may be the problem, or any other SPro settings are to be maintained, any enhancement has to be done.
    Your inputs will be highly appericiated .
    Best Regards
    Suresh

    Hi,
             I am stuck with the same issue. I have checked the check box to create service order/notification from the meter reading order. Please let me know if you have found any resolution
    Thanks,
    Dhana

  • Duplicate sets of meter read orders

    Hello Team,
    Meter read order gets created duplicated so how i can i delete the meter read orders and how can i prevent duplication in future.
    Thanks
    Regards,
    Vijji

    Hello Vijji,
    Have you applied note 1384492 to help resolve your issue?
    Please let me know if this helps.
    Regards
    Olivia

  • Blocking creation of meter reading order for perticular installation

    Hi,
    I want to block creation of meter reading order for perticular installation within an MRU.
    This meter is disconnected in the installation.
    My requirement is if i create meter reading orders for  MRU it should not create MR oder for some installtions.
    your input on the same will be highly helpful.
    Thanks in advance.
    Regards,
    chetan

    Hi,
    Use Blocking Reason in ES31 (installation: Billing/Meter Reading control Tab)...During meter reading order creation, prevents meter reading orders from being created for the registers allocated to the installation.

  • BAPI for meter reading order (MRO) Reversal

    Hi Experts,
    Please let me know if there is any FM or BAPI for meter reading order reversal, Similar to EL37
    Regards
    Bikas

    Hello Bikas,
    Though this is an old post, thought of replying for the sake of googlers who might look for a solution for your query...the below code works!
    *---Begin Of Code
      TYPES : BEGIN OF ty_meter_orders_data,
               anlage   TYPE eablg-anlage,
               adatsoll TYPE eablg-adatsoll,
               ablesgr  TYPE eablg-ablesgr,
              END OF ty_meter_orders_data.
      DATA : lt_meter_orders_data TYPE STANDARD TABLE OF ty_meter_orders_data,
                  xy_ieabl_delete   TYPE  eabl_tab,
                  xy_ieablg_delete  TYPE  eablg_tab,
                  xy_ietrg_delete   TYPE  etrg_tab,
                  x_anlage type anlage,
                  x_retro_upd_date type adatsoll,
                  y_return type char1.
      DATA : y_obj TYPE  isu17_meterread.
    *--Get the needed data for reversal
      SELECT a~anlage
             a~adatsoll
             a~ablesgr
        FROM eablg AS a
        INNER JOIN eabl AS b ON a~ablbelnr = b~ablbelnr
        INTO TABLE lt_meter_orders_data
        WHERE a~anlage = x_anlage AND
              a~adatsoll >= x_retro_upd_date AND
              b~ablstat = '0'. "MR Order
      IF sy-subrc = 0.
        SORT lt_meter_orders_data BY anlage ablesgr adatsoll.
        DELETE ADJACENT DUPLICATES FROM lt_meter_orders_data COMPARING anlage ablesgr adatsoll.
        SORT lt_meter_orders_data BY adatsoll DESCENDING.
        LOOP AT lt_meter_orders_data ASSIGNING FIELD-SYMBOL(<fs_meter_orders_data>).
          CALL FUNCTION 'ISU_O_METERREAD_OPEN'
            EXPORTING
              x_anlage              = <fs_meter_orders_data>-anlage
              x_adatsoll            = <fs_meter_orders_data>-adatsoll
              x_ablesgr             = <fs_meter_orders_data>-ablesgr
              x_select2             = '5'
              x_wmode               = '6'
            IMPORTING
              y_obj                 = y_obj
            EXCEPTIONS
              not_found             = 1
              foreign_lock          = 2
              internal_error        = 3
              input_error           = 4
              existing              = 5
              number_error          = 6
              general_fault         = 7
              system_error          = 8
              manual_abort          = 9
              gasdat_not_found      = 10
              no_mrrel_registers    = 11
              internal_warning      = 12
              not_authorized        = 13
              not_qualified         = 14
              anpstorno_not_allowed = 15
              already_billed        = 16
              dev_already_prep      = 17
              OTHERS                = 18.
          IF sy-subrc = 0.
            CALL FUNCTION 'ISU_O_METERREAD_ACTION'
              EXPORTING
                x_okcode             = 'PSAV'
              CHANGING
                xy_obj               = y_obj
              EXCEPTIONS
                cancelled            = 1
                failed               = 2
                action_not_supported = 3
                system_error         = 4
                input_error          = 5
                not_customized       = 6
                OTHERS               = 7.
            IF sy-subrc = 0.
              CALL FUNCTION 'ISU_O_METERREAD_ACTION'
                EXPORTING
                  x_okcode             = 'SAVE'
                TABLES
                  yt_eabl_delete       = xy_ieabl_delete[]
                  yt_eablg_delete      = xy_ieablg_delete[]
                  yt_etrg_delete       = xy_ietrg_delete[]
                CHANGING
                  xy_obj               = y_obj
                EXCEPTIONS
                  cancelled            = 1
                   failed               = 2
                  action_not_supported = 3
                  system_error         = 4
                  input_error          = 5
                  not_customized       = 6
                  OTHERS               = 7.
              IF sy-subrc = 0.
                COMMIT WORK.
              ENDIF.
            ENDIF.
            CALL FUNCTION 'ISU_O_METERREAD_CLOSE'
              CHANGING
                xy_obj = y_obj.
    * Implement suitable error handling here
          ELSE.
            y_return = 'E'.
          ENDIF.
        ENDLOOP.
        IF y_return <> 'E'.
          y_return = 'S'.
        ENDIF.
      ELSE
    *    RAISE no_mtr_read_ordrs_found.
      ENDIF.
    *---End of Code
    Thanks.
    Mohammed.

  • BAPI or FM to Create a Meter Reading Order

    Hi,
      Can anyone suggest me the name of a standard BAPI or any standard function module which can create a Meter Reading Order. I tried with ISU_S_METERREAD_CREATE but it is not creating the order, don't know why.
      Please Help.
    Regards,
    Kirti Bhushan.

    Sometimes ,BAPI´s are executed without errors (sy-subrc = 0 ) and don´t create the item (order,invoice etc.).
    That´s why you have to do a commit work after execution :
    CALL FUNCTION BAPI ****
    IF sy-subrc = 0 .
    commit work.
    endif.

  • BAPI / FM to create meter read order   (  Tcode  EL01)

    Hi All ,
    Is  there any BAPI or Function module to create meter read order  (Tcode EL01) .   Thanks in advance.
    Regards
    Neetesh

    use :
    ISU_S_METERREAD_CREATE

  • Creation of Meter Reading Order

    Hi,
    My uploading program creating Meter Reading order using the function module ISU_S_METERREAD_CREATE. MRO is created Successfully for Meter Reading Reason 06. The Problem is Metering scheme is not Displaying in the Table EANL for the particular Subinstallation.
    Any one help me pls.
    Thanks in Advance
    Lakshmi

    Hi,
    Use Blocking Reason in ES31 (installation: Billing/Meter Reading control Tab)...During meter reading order creation, prevents meter reading orders from being created for the registers allocated to the installation.

  • Meter reading order simulation

    Hello experts,
    I need to "simulate" meter reading order creation process, to download orders (EL35, with specific formkey) and use the file for external system.
    Is this possible?
    Thanks,
    Angela

    Hello Olivia,
    thank you for your answer, but i'm afraid I don't understand it properly.
    I thounght  ISUMSORDER was for working order not for meter reading; is it not correct?
    I need to simulate meter reading order, I mean to use EL35 but without filling db tables EABL/EABLG.
    thanks,
    Angela

  • Link between notification number and meter reading order in ISU

    what is the link between notification number and meter reading order in ISU. i have written a program to close all open notifications but now i want the program to close only notifications with closed meter reading orders but i cant find the link between meter  reading order and notification

    HI timothy
    you can tell me how do you solved this issue?
    how i can match reading Order with the order in Work Management?
    i need some configuration?
    thanks in advance
    Miguel

  • SRM Purchase Order not Created Automatically

    SRM 7.0 Extended Classic Scenario:
    Issue:  When creating a standard shopping cart in SRM the Purchase Order is not created in SRM (or in R3).  Eventhough the shopping cart is fully approved and has a vendor assigned.  The overall shopping cart status remains approved,the line items status shows 'item in transfer process'.  Otherwise there are no errors in the application monitor.  Nothing appears in table BBP_DOCUMENT_TAB
    Considerations:  Everything is working fine for limit shopping cart, the PO gets created automatically and the SC has status follow-on document created.
    Also, this was working fine for standard orders, it seems that support pack 7 or 8 broke this functionality, yet I do not see any notes regarding the issue.  Any ideas on what controls the automatic PO generation or how it could work for limits but not standard SC's would be greatly appreciated.
    Thanks,
    Matt
    Edited by: Matt Joseph on Nov 17, 2010 10:27 AM

    First of all PO should be created then you can see entry in doc table.
    u Note 1480994 - How to process a shopping cart with status I1111?
    see SAP treatment and some work around..
    Symptom
    Shopping Cart is stuck in status I1111 (Item in transfer process).
    Other terms
    Application Monitor, I1112, I1111, Monitor Shopping Cart
    Reason and Prerequisites
    This is a FAQ note, which shows how to treat such Shopping Carts.
    Solution
    Shopping Cart status I1111 (Item in transfer process) is a temporary status, which means that shopping cart is being processed in order to generate a follow-on document.
    However, it is possible that status I1111 becomes permanent and, in this case, shopping cart status is inconsistent.
    There are some procedures to be considered when shopping cart is stuck in status I1111.
    Report BBP_ALERT_SB_NOTTRANSFERED is available to change the status of the shopping cart item from I1111 to 'Error in transmission' (I1112) and later on, it is possible to retransfer this shopping cart from Application Monitor/Monitor Shopping Cart transactions.
    Note 441768 provides more information about this report.
    However, BBP_ALERT_SB_NOTTRANSFERED works in a time stamp. BBP_ALERT_SB_NOTTRANSFERED will check shopping carts created after date specified in table BBP_CONTROL.
    To check this information, go to SE16 -> BBP_CONTROL and as input parameter provide the report name. Here you will see the last date that report has been run.
    If you have a shopping cart in status I1111 which is older than date specified in table BBP_CONTROL, you have to change manually the time stamp specified in such table. You have to specify an older date (before shopping cart creation).
    Doing this, you can run report BBP_ALERT_SB_NOTTRANSFERED and cart in question will have status I1112 assigned.
    Once status I1112 is assigned to shopping cart, you can retransfer it from Application Monitor (BBPWEBMONITOR transaction in SAP_GUI) or Monitor Shopping Cart in the web.
    To transfer Shopping Carts from BBPWEBMONITOR, some settings need to be done.
    Following notes should be considered:
    550044
    FAQ Alert monitor RZ20 does not show any alerts
    396102
    BBP Alert monitor RZ20 does not work
    387701
    The Shopping Card are not transfered after "resubmit"
    According note 387701, workflows WS10000214 and WS10000215 have to be activated. One of them is to delete shopping cart item using Application Monitor and the other one is to resubmit the cart. Then, once this settings are done, you can retransfer I1112 carts from Application Monitor.
    If all settings are done and you have a cart with status I1112 that it is not appearing in Application Monitor, report BBP_ALERT_SC_STATUS_ERROR is available, which checks the carts in status I1112 and put them in the Application Monitor, in order to allow you to transfer them again. Note 631513 explains about this report.
    Additional notes to be considered in this scenario:
    1159609
    Transfer function does not create local purchase orders
    1233037
    BBP_MON_SC: Shopping cart transfer ends in status I1111
    1040878
    Cannot transfer shopping carts with status I1112
    Header Data
    Release Status: Released for Customer
    Released on: 09.08.2010  16:04:09
    Master Language: English
    Priority: Recommendations/additional info
    Category: Consulting
    Primary Component: SRM-EBP-SHP Shopping Cart
    Secondary Components: SRM-EBP-APM Application Monitors
    Affected Releases
    Release-Independent
    Related Notes
    1233037 - BBP_MON_SC: Shopping cart transfer ends in status I1111
    1159609 - Transfer function does not create local purchase orders
    1040878 - Cannot transfer shopping carts with status I1112

  • Service order is creating automatically

    Dear All,
    After a creating the repair order and return delivery when the service order is creating automatically with the repair order it giving me an error that "Order type CS03 is not suitable for repair processing" and when i see the help it says me "You have selected an order type that is not suitable for return material authorization.
    An order type is only suitable for return material authorization if the following three conditions are met:
    the order is a service order
    the order is not revenue-producing
    the order has a refurbishment indicator"
    and the setting is appropriate but still its not working....Please help me on this.....
    Thanks & Regards,
    Mohsin

    Customization --> Plant Maintenance and Customer Service --> Maintenance and Service Processing --> Maintenance and Service Orders --> Functions and Settings for Order Types --> Indicate Order Types for Refurbishment Processing
    Pls confirm if the checkbox "Refurbishment order" is checked.
    B A

  • My 4th generation ipod touch is not turning off when i hold the wake button for few seconds the Voice Control Function Starts Automatically.Please help me to get out of this problem.

    My 4th generation ipod touch is not turning off when i hold the wake button for few seconds the Voice Control Function Starts Automatically.Please help me to get out of this problem.

    Sorry i mistakenly made this question. It was alright. No Problem At ALL

  • Idoc info in 'Services for Objects' when a sales order is created

    Hi Guys
    Could one of you remind me how to turn on the Idoc info in the 'Services for Objects' > workflow option.
    I know how to turn on the services for objects using the user profile and entering parameter id:SD_SWU_ACTIVE , parameter value: X.
    I am not able to see the Idoc number/info that was used to create the sales order. I can see all the information in WE05 but the sales order does not show me any history of having used the Idoc.
    When i go to sales order and select the services for objects option followed by workflow the system should show the IDOC number/info used to create this order.
    Your help will be appreciated.
    Thanks
    Manish
    Edited by: Comes Naturally on Feb 23, 2009 3:46 PM

    Hi,
    1. Configure the IDoc with message type ORDERS and basic IDoc type as ORDERS05 (You have to follow common step-by-step approach)
    2. Configure Message Control to automatically generate IDoc whenever a Sales Order is created. (I mean output type)
    So whenever a Sales Order is created, output type will generate an IDoc.
    Hope this information is useful.
    Regards,
    AK

Maybe you are looking for