For Gali Kling : another points hunter

Dear Gali Kling,
I have always felt that SDN forums are a place where people contribute with interest and enthusiasm and points just a matter of appreciation.
But this new bud ( SHESAGIRI GEDILA ) seems to make points by telling " Sent mail reward points " concept.
Most unfortunate is he becomes the top 3 in SAP SD forum.
please take a note at these links where the time is also very narrow. how on earth could this be possible ???
thread ( time gap in mins)
SAP SD TABLES??(3 min)
/message/3802886#3802886 [original link is broken](4 min)
PGI pick up zero?(3 min)
/message/3802884#3802884 [original link is broken](4 min)
CUSTOMER HIERARCHY?(4 min)
sell material directly to Vendor????(3 min)
delete some requirements on a materia????((2 min)
block sales order???(2 min)
/message/3762670#3762670 [original link is broken](<b>1 min</b>)
as a believer in SDN please save the interest by doing the needful.
Best Regards

Hi Ravi,
Unfortunately, I found another person whose name is Chandru in ERP-SD forum who is getting points by maintaining different ids as like SHESAGIRI GEDILA .
Check these links:
(With the name of NarayanaS)
Transportation management
Re: Need Cond tech sequence
Condition records
Sales Order Conversion
(With the name of Partha)
Tcode needed
Re: Tcode for account determination
Re: Account key
Tools used for conversion
We need to spread the word SDN is for knowledge sharing and building but NOT FOR GETTING POINTS.
Thanks,
Vinay

Similar Messages

Another Points hunter.....check this!!!!

Very Good Progress Sunil Bodda !!!!
Only 16 posts 80 points.
Mr. Subba Reddy and Sarika krishna likes ONLY Sunils answers though other users posted right answers..
Ohmmmmmmmmmmmmm.
Check these links
drill down reports
script debugging
Download
Regarding ALE/IDOCS
Reports
how to change the status of IDOCS from 29 status to 53
THIS is latest...
model view
Message was edited by:
James Bond

there is a topic about this in the Coffe Corner, interestingly enough it was not judged as point huntig by SDN Police
Point Hunter??
and the next action few minutes ago:
model view

Another points hunter

hi
check out these links both id's are registered on the same day and even when the user doesn't gave answer he had assigned 10 points.
this should not be happen its shame being professionals doing things like this.
Please don't think that nobody will observe these sort of things every body will be closely watching
Shipment and Tranportation
Steps for output determination
[url=Diffrence between exclusion and exclusive in pricing procedure;Diffrence between exclusion and exclusive in pricing procedure;/url]

congrats prashant
we should block this kind of users
YATISH ,, should look in to this ,
previously i was send on Manoj Mahajan, I dont know why this guy has not been blocked .. shockingly today he is number 1 in this forumn.
siva
Message was edited by:
siva narayana

How do you crop an audio that is in the background for it to then start again in another point in iMovie?

I'm working on this project and it has background music. I need the background music to stop (i.e crop the background music) and then make it start in another point. In simpler words I just need to crop a part of the audio out and continue by fading, or to simply add two background audios.

You're in much more control with your audio, when you do not use the 'background' feature (which is meant for a very convenient 'auto mode'), but use audio as 'clips':
drag your background music onto the first video-clip of your Project
it appears as a green bar
you can process this bar as any other clip in iMovie:
move it, shorten it, split it, copy it. plus, you can apply fades at front at end ....
http://help.apple.com/imovie/#mov3b0fa95d
http://help.apple.com/imovie/#mov3b0fa323

Custom keyboard shortcuts for Liquify and Vanishing Point filter interfaces in Photoshop CS4?

Is there a way to set custom keyboard shortcuts for Liquify and Vanishing Point filter interfaces in Photoshop CS4? When I change my keyboard shortcuts preferences for Photoshop, they don't change for these filter interfaces. Is there another way?

what is the problem ??
I tried to change the shortcut for the Vanishing Point and Liquify from
Edit -> keyboard shortcuts(button) -> keyboard shortcuts (tab) -> filter (tab)
and you will find these filters :
double click on it and make a new shortcut
but it MUST be Ctrl + (any letter) or you can make it Ctrl + Alt + (any letter)
but if you made it just one lettre like S for example
you will can't make a shortcut.
hope I understood what you ment ???

I just recently up graded from AI CS6 to AI CC and I am having issues with my pen tool. If I create a starting point and then make another point it does not allow me to make the secnd point an end point. The pen tool stays active and I either have to clic

I just recently up graded from AI CS6 to AI CC and I am having issues with my pen tool. If I create a starting point and then make another point it does not allow me to make the second point an end point. The pen tool stays active and I either have to click to isolate the path or I have to return to the first point and close the path. Please help.

artisttouch,
If you cannot close the Pen Tool by switching to another tool, as a temporary measure you may try pressing P (for Pen).
To solve it, you may try the list.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save curent artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Exporting the Browse Sequence XML file for Use in Another Project

When I generate a browse sequence based on the TOC using zero for the book level, instead of getting A, A1, A2, B, B1, B2, I get A, B, A1, A2, B1, B2. The TOC runs through all 1st level items first, cycles back through all 2nd level item, then 3rd level, etc.
My workaround was to auto-create the browse sequence at a 0 level and then manually manipulate it to output according to how my readers would actually read my online book (ie A Aa A1 A1a A1b A2 A2a A2b B B1 etc etc).
Now that I have my browse sequence in the correct order for this project, I do not want to repeat these steps every time I create a new version of my OLH for the same guide after some minor updates have been made to the FM source.
There is a file named whbrs.xml inside the output folder and it contains the browse sequence order I specified during my workaround steps.
Is it possible to export this file to another location for use in another project referencing the same guide?
This methodology is much preferred as I am working at an enterprise level with multiple documents (some numbering in the hundreds of pages) and do not want to have to manually use my workaround for each project I update over the next few years.

Hi Kristopher
You probably wouldn't want to use that particular file as it's an output file. You would likely have better luck using the ProjectName.BRS file as that one should be a source file.
However, keep in mind that whether (or how well) this will work will entirely depend on having the recipient project using the same identical structure and identical file names.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

I have two iTunes accounts, one for music and another for audiobooks. I want to merge them and maintain only one iTunes account. How do I do it?

I have two iTunes accounts, one for music and another for audiobooks. I want to merge them and maintain only one iTunes account. How do I do it?

You cannot.

Can windows xp use a different sound card for itunes - I want to use a sound card for itunes and another for all other apps

Can Windows XP use a different sound card for itunes - I want to use a sound card for itunes and another for all ther apps

To the best of my knowledge, Windows is not capable of setting a specific sound card based on the app being used, it's all or nothing.
Try a google search or search the Microsoft site.

Can i have a apple id for music and another for icloud?

can i have a apple id for music and another for icloud?

You can use one ID for the iTunes store account where you buy music, and another for an iCloud account.

The Ipad2 Application Data folder is taking up huge space in C: Drive. How can I shift the User Application data for iPad2 to another Drive?

The Ipad2 Application Data folder is taking up huge space in C: Drive. How can I shift the User Application data for iPad2 to another Drive?

Thanks a lot for the response. Yes, I am checking my C: drive data thoroughly now, including the hidden folders, to ascertain if something else can be moved, as per your suggestion.

XSLT for-each within another for-each

Hi All,
My XSLT mapping needs to pick a field(BOL) from the Header and the using that, search the Items node for the matching BOL and generate the output accordingly.
My current XSLT is as follows(not the entire program, just the snippet)
     <xsl:for-each select="ns0:Messages/ns0:Message1/ns1:MT_Header/Header">
                      <xsl:param name="search"><xsl:value-of select="bol"/></xsl:param>
     <xsl:for-each select="ns0:Messages/ns0:Message2/ns1:MT_Items/Item[BOL=$search]">
              <Output>
                 <BOL_ITEM><xsl:value-of select="BOL_ITEM"/></BOL_ITEM>
            </Output>
     </xsl:for-each>
     </xsl:for-each>
The following code works correctly(without the outer for-each and with hardcoding)
                         <xsl:param name="search">100</xsl:param>
     <xsl:for-each select="ns0:Messages/ns0:Message2/ns1:MT_Items/Item[BOL=$search]">
              <Output>
                 <BOL_ITEM><xsl:value-of select="BOL_ITEM"/></BOL_ITEM>
            </Output>
     </xsl:for-each>
So its the for-each within another for-each that does not work . Is there some syntax problem ? Or another way to achieve this in XSLT?

Closing this thread

Stacked 100% bar chart - Problem with datatips for zero value data points

I have a stacked 100% bar chart that shows datatips in Flex 4.   However, I don't want it to show datatips for
data points with zero values.   Flex 4 shows the datatip for a zero value data point on the left side of a bar if the data point is not the first in the series.
Here's the code that illustrates this problem.    Of particular concern is the July bar.    Because of the zero value data point problem, it's not possible to see the datatip for "aaa".
Any ideas on how we can hide/remove the datatips for zero value data points ?        Thanks.
<?xml version="1.0"?>
<s:Application
xmlns:fx="
http://ns.adobe.com/mxml/2009"xmlns:mx="
library://ns.adobe.com/flex/mx"xmlns:s="
library://ns.adobe.com/flex/spark"creationComplete="initApp()"
height="
1050" width="600">
<s:layout>
<s:VerticalLayout/>
</s:layout>
<fx:Script><![CDATA[
import mx.collections.ArrayCollection;[
Bindable]
private var yearlyData:ArrayCollection = new ArrayCollection([{month:
"Aug", a:1, b:10, c:1, d:10, e:0},{month:
"July", a:1, b:10, c:10, d:10, e:0},{month:
"June", a:10, b:10, c:10, d:10, e:0},{month:
"May", a:10, b:10, c:10, d:0, e:10},{month:
"April", a:10, b:10, c:0, d:10, e:10},{month:
"March", a:10, b:0, c:10, d:10, e:10},{month:
"February", a:0, b:10, c:10, d:10, e:10},{month:
"January", a:10, b:10, c:10, d:10, e:10}]);
private function initApp():void {}
]]>
</fx:Script>
<s:Panel title="Stacked Bar Chart - Problems with DataTips for Zero Value Items" id="panel1">
<s:layout>
<s:HorizontalLayout/>
</s:layout>
<mx:BarChart id="myChart" type="stacked"dataProvider="
{yearlyData}" showDataTips="true">
<mx:verticalAxis>
<mx:CategoryAxis categoryField="month"/>
</mx:verticalAxis>
<mx:series>
<mx:BarSeries
xField="a"displayName="
aaa"/>
<mx:BarSeries
xField="b"displayName="
bbb"/>
<mx:BarSeries
xField="c"displayName="
ccc"/>
<mx:BarSeries
xField="d"displayName="
ddd"/>
<mx:BarSeries
xField="e"displayName="
eee"/>
</mx:series>
</mx:BarChart>
<mx:Legend dataProvider="{myChart}"/>
</s:Panel>
<s:RichText width="700">
<s:br></s:br>
<s:p fontWeight="bold">The problem:</s:p>
<s:p>Datatips for zero value data points appear on left side of bar (if data point is not the first point in series).</s:p>
<s:br></s:br>
<s:p fontWeight="bold">For example:</s:p>
<s:p>1) For "June", eee = 0, mouse over the left side of the bar to see a datatip for "eee". Not good.</s:p>
<s:br></s:br>
<s:p>2) For "July", eee = 0 and aaa = 1, can't see the datatip for "aaa", instead "eee" shows. Real bad.</s:p>
<s:br></s:br>
<s:p>3) For "Feb", aaa = 0, datatip for "aaa" (first point) does not show. This is good.</s:p>
<s:br></s:br>
<s:p>4) For "Mar", bbb = 0, datatip for "bbb" shows on the left side of the bar. Not good.</s:p>
<s:br></s:br>
<s:p fontWeight="bold">Challenge:</s:p>
<s:p>How can we hide/remove datatips for zero value data points?</s:p>
<s:br></s:br>
</s:RichText></s:Application>

FYI.
Still have the issue after upgrading to the latest Flex Builder 4.0.1 with SDK 4.1.0 build 16076.
Posted this as a bug in the Adobe Flex Bug and Issue Management system.     JIRA
http://bugs.adobe.com/jira/browse/FLEXDMV-2478
Which is a clone of a similar issue with Flex 3 ...
http://bugs.adobe.com/jira/browse/FLEXDMV-1984

[svn] 3779: Continue fix for BLZ-262: null pointer exception on redeploy of web app/servlet.

Revision: 3779
Author: [email protected]
Date: 2008-10-21 10:23:55 -0700 (Tue, 21 Oct 2008)
Log Message:
Continue fix for BLZ-262: null pointer exception on redeploy of web app/servlet.
Remove finally block in servlet init() as the call to destroy() in the catch block will clear ThreadLocals
if there is an error. Move it to the end of try block instead since the init() thread doesn't need any
thread locals set.
Log the startup error before calling destroy() in init() catch clause.
QA: Yes
Doc: No
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-262
Modified Paths:
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/MessageBrokerServlet.java

Hello!
I had a similar problem under WebLogic 6.1 SP4 after deploying a war-file with
a bug.
After deploying the corrected file, it seemed that the old version was deployed
again.
Perhaps this behaviour will help you to load the new application/ejb:
- undeploy
- remove from targets
- move to targets
- deploy
Claudia
"Marco" <[email protected]> wrote:
>
hi all,
i have found a werid problem in deploying applications in Solaris 8
for weblogic
7.0.
i have deployed one EJB, and the first time i access it (thru teh web
app embedded
in the .ear) it gave me a null pointer exception because i was failing
to lookup
one environment variable.
so, i fix the code, rebuild the ear and redeployed, and the same error
happened
again.
i am sure i did not do any mistakees because i have put some system.err
statements
in the bean code to show the workflow, and when i have deployed it on
Window 2k
the statemens appeared.
but in solaris they didnot appear, and i got the same exception that
i had before..
it looks like wls is caching teh ejb, because whenever i redeploy it
(adding more
and more system.err statements) it always execute the faulty code of
when deployed
the very first time.
anyone can help?
regards
marco

Failed to get the Availability State on server Distriubtionpoint1 for role SMS Distribution Point

Distriubtionpoint1-- Server share distribution point
Distriubtionpoint1-- Acting as site system role (DP)
Distriubtionpoint1--attached under the primary PR0 (Primary server0)
Primary server0-- reporting to CS0 (central site 0)
Distriubtionpoint1-- Windows 2008 sp1 r2 standard
Infrastructure details:-
=============
Distriubtionpoint1 located in different domain with one way trust.
1) Check ping status with FQDN from both domain and it is success.
2) Check port 135, 445, 80,443 through telnet from both domain and success.
3) Primary Server0 account is member of the local admin group on Distriubtionpoint1.
4) Check the PR0-SCCM-DP$ folder NTFS & Share permission
Share permission
a) everyone & local admin group has full control
Security permission
a) System has full permission
b) user has read & exec
4) Local admin full
Sitestat.log error message:
---->: Failed to get the Availability State on server
Distriubtionpoint1 for role SMS Distribution Point. SMS_SITE_SYSTEM_STATUS_SUMMARIZER 4/22/2014 9:00:15 PM 952 (0x03B8)
---->: Now polling via NAL for SiteObject "["Display=\\Distriubtionpoint1\PR0-SCCM-DP$\"]MSWNET:["SMS_SITE=PR0"]\\Distriubtionpoint1\PR0-SCCM-DP$\" SMS_SITE_SYSTEM_STATUS_SUMMARIZER
4/22/2014 9:00:15 PM 952 (0x03B8)
for ["Display=\\Distriubtionpoint1\PR0-SCCM-DP$\"]MSWNET:["SMS_SITE=PR0"]\\Distriubtionpoint1\PR0-SCCM-DP$\, no connection account is available SMS_SITE_SYSTEM_STATUS_SUMMARIZER
4/22/2014 9:00:15 PM 952 (0x03B8)
---->: The NAL path ["Display=\\Distriubtionpoint1\PR0-SCCM-DP$\"]MSWNET:["SMS_SITE=PR0"]\\Distriubtionpoint1\PR0-SCCM-DP$\ is currently not accessible. SMS_SITE_SYSTEM_STATUS_SUMMARIZER
4/22/2014 9:00:18 PM 952 (0x03B8)
Info>: Unable to get available space for the Site Object ["Display=\\Distriubtionpoint1\PR0-SCCM-DP$\"]MSWNET:["SMS_SITE=PR0"]\\Distriubtionpoint1\PR0-SCCM-DP$\ SMS_SITE_SYSTEM_STATUS_SUMMARIZER
4/22/2014 9:00:18 PM 952 (0x03B8)
STATMSG: ID=4701 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_SITE_SYSTEM_STATUS_SUMMARIZER" SYS=Distriubtionpoint1 SITE=PR0 PID=4112 TID=952 GMTDATE=Wed Apr 23 01:00:18.002
2014 ISTR0="\\Distriubtionpoint1\PR0-SCCM-DP$" ISTR1="\\Distriubtionpoint1\PR0-SCCM-DP$" ISTR2="2014 04 4 17 04 31 31 000" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8=""
ISTR9="" NUMATTRS=0 SMS_SITE_SYSTEM_STATUS_SUMMARIZER 4/22/2014 9:00:18 PM 952 (0x03B8)
for ["Display=\\Distriubtionpoint1\PR0-SCCM-DP$\"]MSWNET:["SMS_SITE=PR0"]\\Distriubtionpoint1\PR0-SCCM-DP$\, no connection account is available SMS_SITE_SYSTEM_STATUS_SUMMARIZER
4/22/2014 9:00:18 PM 952 (0x03B8)
---->: GetOperationsManagementData failed to connect to ["Display=\\Distriubtionpoint1\PR0-SCCM-DP$\"]MSWNET:["SMS_SITE=PR0"]\\Distriubtionpoint1\PR0-SCCM-DP$\; error
= 5. SMS_SITE_SYSTEM_STATUS_SUMMARIZER 4/22/2014 9:00:20 PM 952 (0x03B8)

I have tried to access the server share DP from the primary server by using my user
credential. Yes I can able to access the share.
But when I use the system credential to access the share received an error message as shown in below screenshot
Hence i have provided the share and ntfs permission administrators, system, everyone,
primary server account with full control on both tab. but still i am receiving error message.
:\temp>whoami
US\prasath
c:\temp>dir \\PrimaryServer1\SCCM-DP$
Volume in drive \\PrimaryServer1\SCCM-DP$ is Data
Volume Serial Number is 22F0-661B
Directory of \\PrimaryServer1\SCCM-DP$03/17/2014
03:33 PM <DIR> .03/17/2014 03:33 PM <DIR> .
04/01/2014 08:04 AM <DIR> SMSPKG
0 File(s) 0 bytes
3 Dir(s) 514,625,064,960 bytes free
===========================================
C:\Windows\system32>whoami
nt authority\system
C:\Windows\system32>dir
\\PrimaryServer1\SCCM-DP$
Access is denied.

For Gali Kling : another points hunter

Similar Messages

Maybe you are looking for