For GR outbound how to configure EDI/ALE?

Hi Friends,
I have the requirement where the GR IDOC need to be sent to the target system. So for that I need to configure the IDoc for GR, for this i want the steps for GR OUTBOUND as to how to configure EDI/ALE .
Thanks in Advance,
Meghna.

Meghna,
Refer the following forums.Will help you.
RFC Destination not getting connected - IDoc to XI scenario
Problem sending IDOC to XI
http://help.sap.com/saphelp_erp2004/helpdata/en/04/25fbc19e3511d188da0000e8216438/frameset.htm
Manju.

Similar Messages

How to configure for zimbra mail, How to configure for zimbra mail, How to configure for zimbra mail

How to configure the iphone for zimbra mail?
have anyone used zimbra mail in iphone mail settings?
I'm able to access zimbra through safari...
But what is the configuration needed to be done to see in mail box?

Contact Zimbra support and ask them.

Airport Express as "Ethernet-Bridge" for old iMac - how to configure WPA?

Hi,
I have a very old iMac G4, which up to now was connected to my network via a Netgear wireless bridge. As I switched my router to a Fritzbox, which supports N-Draft I wanted all network clients to use N-Draft, so I bought the new AX.
It works ok as an Ethernet bridge when configuring the wireless part to "connect to a wireless network", "allow ethernet clients" and no encryption.
I am now online with that configuration.
But when I activate either WEP, WAP, WAP&WAP2 encryption on my Fritzbox router and then in the Airport Express it won't get an IP-address via DHCP anymore. It can connect to the wireless network, but via the ethernet connection it does not assign ip-address anymore.
I already tried assigning the IP-address manually. The light on the AX is green, but DNS does not resolve, although I also entered the DNS server of my provider manually.
Any idea? Is it perhaps just not possible the use the ethernet port if the wireless connection is encryted?
Regards,
Jörg

Hi again,
I can answer my question now: my router (Fritzbox) and the Airport Express can only communicate with ONE kind of encrytion - only via WAP2.
WEP does not work, WAP does not work, WAP/WAP2 does not work.
But at least now I have a complete N-Draft Network with good encrytion. It only cost me 4 evenings of long trial & error configurations.
Hope I can at least help others,
Jörg

Configuration of ALE & Idoc

Hi,
I am trying to send the master data, transaction & control data from one SAP client to another SAP system using ALE ,so could you guys help me how to configure the ALE and what are the transaction involved doing this operation?
If any one can give me stepwise configuration documentation that will be great help.
Thanks,
- John.

1 Logical System
2 Assign Logical system
3 RFC
4 Port
5 Customer distribution model
6 Partner profile
7 CDM distribution
Tcode : SALE
First 2 steps not necessary ( Basis work already done )
Two logical system created
Ls110                -Sender
Ls800                - Receiver
RFC
RFC establishment SM59
Receiving system IP address or hostname
System number, client id
Username, password
Ports
We21 define ports
TRFC ale
File Edi
CPI_C - R2 connections
In the port we need to define Port name and RFC destinations
And version
Customer Distribution Model - BD64
     Sender
     Receiver
     Message type
Partner profile we20 , BD62
     Partner may be customer, vendor, logical system
            In BD62 define the partner system (LS800)
     One more additional entry SYNC for synchronization
     Post processing Agent - workflow
     MATMAS 03 03 is the version
Collect idoc we need to trigger
Transfer idoc will be send immediately
With message control
     Which program need to run for generating the idoc
With out message control
     For some of the programs have inbuilt idoc generation for that case no need to mention program name
     Process code
Distribute CDM
Receiving System:
Partner profile is going to control all the thing
BD64 - > edit - > model view - > distribute
BD67 Function module assigned to the process code
BD10 used to create idoc for material
Master idoc generated only buffered
One master idoc multiple communication idoc
One communication idoc generated
We02 idoc satus
Cheers,
Sasi

EDI ALE DOUBTS

hi ,
1) if an idoc is failed , how wil u create it again (not reprocessing bd87).
2)how wil u debug idoc program.
3) how to configure edi and ale.
4) status 51(application not posted) error records will get stored in which table.
5)is it possible to send idoc using trfc port in edi
Regards,
Ganesh
Message was edited by:
ganesh ram

Hi,
1. use WE19
2. use same WE19 here you can find processing using debug mode
3. Check in this site , there will be lot of link how to configure.
4. EDIDS
5. Yes possible
aRs

How to configure the web interface of service desk

Hi All,
We are currently doing a configuration on solman service desk. I am on a stage where in i need to use the web interface of service desk via tcode notif_create_bsp. However, every time i call the transaction code (call the url) i cant view the web. Only an error the "Network Access Message: The website cannot be found".
I already activate needed services and already publish
SIAC_PUBLISH_ALL_INT but it still doesnt work.
I might have missed some configs/procedure on how to do it correctly.
My questions are.
1. How am i going to know the qualified domain name
of the Web AS for solman? How to configure it?
2. Can anyone give me some guide and any step by step documentation/procedure on this.
You help/suggestion will be very much appreciated
Thank you very much,
Ice

Hi,
+"Check the following 2 things. See if the port 8000 is open and in the url for the BSP in internet explorer, replace the host name with the IP address of your Solman server.+
+"+
That was a helpful tip. I change the host name with the ip address ofour solman server. However, upon login, it promts me to enter username and password. I've tried to login using my solman password but it shows an error like this.
Business Server Page (BSP) error
What happened?
Calling the BSP page was terminated due to an error.
SAP Note
The following error text was processed in the system:
Die URL enthält keine vollständige Domainangabe (10.123.161.125 statt 10.123.161.125.).
Exception Class CX_FQDN
Error Name
Program CX_FQDN=======================CP
Include CX_FQDN=======================CM002
ABAP Class CX_FQDN
Method CHECK
Line 10
Long text -
Error type: Exception
Your SAP Business Server Pages Team
Is there anything i need to configure so that i can maintan the username and password?
Thank you for your assistance,
Ice

How to configure quality process with batch management.

Dear Friends,
we have a scenario,our client receive goods with 101movement type into quality inspection stock.
once stock is passed quality check stock,then we will take into unrestricted stock with 321 movement type.
failed in quality test will be rejected.please give me suggestion how to map the scenario.while i am testing
the process in my sandbox,its asking batch number.its not allowing me to post unrestricted stock with 321
movement type.how to make batch as optional in this scenario?if batch is mainted for the material,how to
configure the process.we are not using QM module.
please suggest me.
Regards,
Varun

In Batch management config in Logistic general, Check for the movement type 101 & 321 whether batch creation has been activated to Manual, Automatic, or no creation. In your case it looks like for mvt 321 batch creation is set to manual & for 101 no creation.
if batch creation is set to manual, enter a manual batch no & proceed.
But to cross verify wheter 101 has generated batch or not please check the stocks in MMBE.
Hope this helps.
Regards
Mithun

How to configure bulk breaking articles in SAP retail

hi frnds...
This is my client needs...
How to configure bulk breaking articles in SAP retail for hyper market..
Scenario is like this... Ex: for MEAT
There should be a Parent article & child articles process.
i.e Chicken X - 100 corcoss is divide into child articles (A,B,C,D,E,F) like
Brest bone - 5kg     - A
leg pieces - 2.5kg   - B
wings - 2.5kg         - C
P - 7.5kg                 - D
Q - 10kg                 - E
R - wastage - 50kg - F
these child articles wont consider for inventory
So how to configure this scenario in SAP Article master & to run this process.
Pl help me out with scenario

Please have alook at
[http://help.sap.com/erp2005_ehp_03/helpdata/en/2b/b03889df3611d1953b00a0c930e0da/content.htm]
Material type WERT is correct.
In Material type maintenance you can control at all if a store will be value only inventroy managmenet or both.
Further in the Site master WB02, you can control it on MC level.
regards
B

How to configure Free goods

Dear Experts,
We have a scenario here,Our client raise PO for 25 pcs of material,he receive 28 PC with the same value,client has to pay for 25pcs only.how to configure the process,please suggest me.
Regards,
Varun

>
madhu varun tirupati wrote:
> Dear Experts,
>
> We have a scenario here,Our client raise PO for 25 pcs of material,he receive 28 PC with the same value,client has to pay for 25pcs only.how to configure the process,please suggest me.
>
> Regards,
> Varun
Enter discount % or value in purchase order equivalent to 3 pc rate

How to configure e-mail to forward to outlook 2007

I am looking for help in how to configure my Verizon.msn.com e-mail to forward to outlook 2007. Currently my e-mail is forwarded from Verizon to my msn e-mail address.

Do you make any effort to search for your answers before you post your questions? ERMS is the email response system
The 2nd post on this board - Documentation for Interaction Center (IC) WebClient
There is tons of stuff here to answer your questions as well as show you the configuration. You need a 3rd party CTI solution to do chat that you will read about in the blog.
SAP Notes
759923 Frequently Asked Questions about IC WebClient
940882 Frequently Asked Questions about ERMS
882653 Frequently Asked Questions about Agent Inbox
1114557 SAP CRM 2007 Internet Browser Releases
1118231 Supported user interfaces for SAP CRM
981710 Support for Microsoft Internet Explorer 7.0
1144511 Blank screen when starting CRM WebClient or IC WebClient
1115493 CRM Web UI: Mandatory SICF services for CRM framework
992848 Mandatory ICF nodes for CRM WebClient UI Framework
IC WebClient Consultant Cookbook for CRM 2005
Online Documentation
Online Knowledge Products
Blog: How to Configure Contact Center Simulator User Interface (CCSUI)
Blog: What is Computer Telephony Integration (CTI)

How to configure DNS on RED HAT 5,4

Hello Linux experts
I'm need to configure dns service for Oracle RAC 11gR2
For dns server, I'm using the hosts for RAC.
How to configure DNS on RED HAT 5.4 ?
Anyone have a manual for do this ?
Best Regardss

Regardless of whether your will find tools or perl scripts like h2n, or manage your configuration files directly, you will need to get yourself familiar with basic DNS concepts and terms. A DNS cluster is a number of nameservers that share DNS records. You may perhaps rather want to setup a DNS server system consisting of a master and slave DNS server for your authoritative zone (domain name) on each node, but also configure for DNS forwarding and perhaps caching to public DNS servers on the internet. You may want to configure primary and secondary DNS records on your client sides in /etc/resolve.conf, perhaps also using some round-robin or timeout options.
I'm afraid Google will be your best friend. You may find below links helpful in your approach:
http://www.linuxhomenetworking.com/wiki/index.php/Quick_HOWTO_%3A_Ch18_%3A_Configuring_DNS
http://tldp.org/LDP/lame/LAME/linux-admin-made-easy/domain-name-server.html
http://www.redhat.com/magazine/025nov06/features/dns/
http://www.chinalinuxpub.com/doc/www.siliconvalleyccie.com/linux-hn/dns-static.htm

Can any help on how to configure ALE & EDI

HI,
THIS IS SRINIVAS. I AM GETTING PROBLEM IN CONFIGURING EDI. CAN ANY ONE SUGGEST HOW TO PROCEED IN THIS REGARD.
SRINIVAS.

Hai Sreenivasulu
Check the following Settings
ALE IDOC
Sending System(Outbound ALE Process)
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Create Model View
Tcode BD82 ? Generate partner Profiles & Create Ports
Tcode BD64 ? Distribute the Model view
Message Type MATMAS
Tcode BD10 ? Send Material Data
Tcode WE05 ? Idoc List for watching any Errors
Receiving System(Inbound ALE )
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 ? Idoc List for inbound status codes
ALE IDOC Steps
Sending System(Outbound ALE Process)
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Create Model View
Tcode BD82 !V Generate partner Profiles & Create Ports
Tcode BD64 !V Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 !V Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 !V Send Material Data
Tcode WE05 !V Idoc List for watching any Errors
1)a Goto Tcode SALE
Click on Sending & Receiving Systems-->Select Logical Systems
Here Define Logical Systems---> Click on Execute Button
go for new entries
1) System Name : ERP000
Description : Sending System
2) System Name : ERP800
Description : Receiving System
press Enter & Save
it will ask Request
if you want new request create new Request orpress continue for transfering the objects
B) goto Tcode SALE
Select Assign Client to Logical Systems-->Execute
000--> Double click on this
Give the following Information
Client : ERP 000
City :
Logical System
Currency
Client role
Save this Data
Step 2) For RFC Creation
Goto Tcode SM59-->Select R/3 Connects
Click on Create Button
RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
give the information for required fields
RFC Destination : ERP800
Connection type: 3
Description
Target Host : ERP000
System No:000
lan : EN
Client : 800
User : Login User Name
Password:
save this & Test it & RemortLogin
3)
Goto Tcode BD64 -- click on Change mode button
click on create moduleview
short text : xxxxxxxxxxxxxx
Technical Neme : MODEL_ALV
save this & Press ok
select your just created modelview Name :'MODEL_ALV'.
goto add message type
Model Name : MODEL_ALV
sender : ERP000
Receiver : ERP800
Message type :MATMAS
save & Press Enter
4) Goto Tcode BD82
Give Model View : MODEL_ALV
Partner system : ERP800
execute this by press F8 Button
it will gives you sending system port No :A000000015(Like)
5) Goto Tcode BD64
seelct the modelview
goto >edit>modelview-->distribute
press ok & Press enter
6)goto Tcode : BD10 for Material sending
Material : mat_001
Message Type : MATMAS
Logical System : ERP800
and Execute
7)goto Tcode : BD11 for Material Receiving
Material : mat_001
Message Type : MATMAS
and Execute --> 1 request idoc created for message type Matmas
press enter
Here Master Idoc set for Messge type MATMAS-->press Enter
1 Communication Idoc generated for Message Type
this is your IDOC
Change Pointers
I know how to change the description of a material using ALE Change Pointers.
I will give the following few steps
1) Tcode BD61---> check the change pointers activated check box
        save and goback.
2) Tcode BD50---> check the MATMAS check box save and comeback.
3) Tcode BD51---> goto IDOC_INPUT_MATMAS01 select the checkbox save and comeback.
4) Tcode BD52---> give message type : matmas press ok button.
   select all what ever you want and delete remaining fields.
   save & come back.
5) 5) go to Tcode MM02 select one material and try to change the description and save it
   it will effects the target systems material desciption will also changes
6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute
   give Message type : MATMAS and Executte
ALE/IDOC Status Codes/Messages
01 Error --> Idoc Added
30 Error --> Idoc ready for dispatch(ALE Service)
then goto SE38 --> Execute the Program RBDMIDOC
29 Error --> ALE Service Layer
then goto SE38 --> Execute the Program RSEOUT00
03 Error --> Data Passed to Port ok
then goto SE38 --> Execute the Program RBDMOIND
12 Error --> Dispatch ok
Inbound Status Codes
50 Error --> It will go for ALE Service Layer
56 Error --> Idoc with Errors added
51 Error --> Application Document not posted
65 Error --> Error in ALE Service Layer
for 51 or 56 Errors do the following steps
goto WE19 > give the IDOC Number and Execute>
Press on Inbound function Module
for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your getting 51 Error
IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
IDOCS
http://www.sappro.com/downloads/OneClientDistribution.pdf
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://www.sapgenie.com/sapedi/idoc_abap.htm
Thanks & regards
Sreenivasulu P

How to configure ALE/IDOC in nace for V3.

Hi,
Please let me know how to configure ALE/IDOC output type in Nace and how to configure the message outputs.
I require the steps to configure the above.
Screen shots will also be helpful.
Regards,

Hi Somya,
I have a little manual that explain how to create an outbound Idoc from a message class (for invoice).
But it is in spanish, if you want give me a email address and I'll send you.
Rgrds,
Francisco Castillo

How configure a Logical System (XI) as receiver for an Outbound Idoc?

Hi all,
How can I configure a Logical System (XI) as receiver for an Outbound Idoc?
Points will be given,
Regards,
Daniela

hi,
it all depends on what kind of document you need to send to XI
if you want to send some logistic documents (like orders, deliveries etc)
have a look at my book - where you will find step by step guides
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi"><b>Mastering IDoc Business Scenarios with SAP XI</b></a>
then you will undestand where to change to get it send via LS
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

How to configure a Logical System for XI External System

I'm following the 'How to configure SAP XI to use the standard SAP communications APIs (idoc, pabi, rfc) from external system - How to create XI content with the Integration Builder' document.
I have everything configured, but in section 6.7 when I try to do a transaction BD10 on to send a MATMAS01 idoc using my Logical System IQS_EXTERN to my external system, it says '1 master IDocs set up ...', then it says '0 communication IDocs generated ...' and my external system does not get the IDoc. The NX7 Integration Engine does not get a message from SAP_CE8 to IQS_EXTERN.
How do I specifically configure my Logical System IQS_EXTERN to communicate with my external system via XI (NX7)?
I'm using the ICC Test-System CE8, SAP R/3 Enterprise 4.7 IDES and the NX7 Exchange Infrastructure (http://iccpi7.sap.com/rep/start/index.jsp).
Thanks,
Ed Culnane
Edited by: Ed Culnane on Oct 15, 2008 7:02 PM

Check whether you have setup Partner profile for receiving system ( Here its XI system). You need to create outbound parter profile for XI system.
Check out this forum ...
Re: trying to send Idoc using Standard Outbound Processin option
and blog ..
Introduction to IDoc-XI-File scenario and complete walk through for starters.
Hope this will help.
Nilesh

For GR outbound how to configure EDI/ALE?

Similar Messages

Maybe you are looking for