For IDOC monitoring, analysis and error handling in  ALE & idoc

Hello...experts..can u please tell me about idoc monitoring,analysis and error handling..and can u please tell as per interview  point of view in this area..if availble can u send material about this...
thx
Message was edited by:
        durga kottapalli

Hi,
Reprocessing IDocs with errors
Outbound (BD88)
Once the error has been determined and corrected it is not necessary to resend the IDoc again. You simply resend the IDocs that have already been generated.
Using the IDoc overview screen you need to take note of the following for each IDoc that was not processed:
Error number: 2, 4, 5, 25, 29
Error number: 30 (Execute Check IDoc dispatch to process)
IDoc number
Using the Error number, the IDoc number and the transaction BD88 , with the required message type you can resend the IDoc. Match the error number with this transaction and execute the function for the IDocs incorrectly processed.
Just check the below link, u will get all IDOC related Interview questions
http://www.allsaplinks.com/idoc_sample.html
http://www.allsaplinks.com/
http://www.sappoint.com/abap.html
http://www.sap-img.com/
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDI/CAEDI.pdf
http://www.sappoint.com/abap.html
http://sap.ittoolbox.com/documents/popular-q-and-a/extending-a-basic-idoc-type-2358
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://expertanswercenter.techtarget.com/eac/knowledgebaseCategory/0,295197,sid63_tax296858_idx0_off50,00.html
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/dc/6b7eee43d711d1893e0000e8323c4f/frameset.htm
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sap-img.com/
http://www.allsaplinks.com/
Regards,
Suresh.
Message was edited by:
        SureshKumar Ramamoorthy

Similar Messages

  • Error handling in ale idocs

    hi experts ...
       i doc type get extended in outbound side , how can we check whether its correct or not,in case if any error are raised where we find it.
      thanks & regards,
      karthik.M

    Hi Karthik,
    Once you have extended your IDOC you have to do the code chagnes in your interface or if you are using standard interface you do the required changes in the user exits.
    then while creating the Partner profile in WE20 you have to add the both  basic type and extension then check the check box '  Cancel Processing after syntax Error'    So that it will display in WE02/WE05 once you executed your Interface.
    Regards,
    Venkat

  • How to monitor the alerts(error handling) in seerburger adapter?

    hi,
    is it like normal moniotoring for any scenario..i have to do the monitoring in seeburger adapter.
    any other specific thing i have to take care to do monitoring the alerts (error handling) in seeburger adapter for AS2 and FTP adapters..
    plz give other ways to monitor interfaces for seeburger adapter.
    Regards
    Raja

    Hi Raja,
    All Seeburger adapters have option of some kind of acknowledgement to be sent to the sender or any  partner... u need to check the respective adapter documention....
    for eg: FTP adapter can be configured for Message protocol - FTP-REPORTS
    for sending various types of reports to any Business Partner,,,reports like dispatch report, transmission reports,,....etc
    and for monitoring errors in XI... u can configure alerts as u normally do.....
    *Reward points if useful*
    Regards,
    Sushil.

  • Proxies - Queueing and Error handling features ???

    My understanding is that you can have synchronous and asynchronous proxies. Do proxies have a queueing mechanism, and do they provide reprocessing and error handling features ???
    Thanks in advance.

    Hi,
    The error can happen due to application error, may be incorrect data or or wrong type of data.
    Or system error, in case the call to SAP XI is not successful.
    Youc an use fault message for the same.
    If you want to catch these exceptions in SAP itself and send alert then you can either use standard FM for raising alert.
    More here:
    http://help.sap.com/saphelp_nw04/helpdata/en/25/a45c3cff8ca92be10000000a114084/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/a1/082589fc4246f09793039d5fb01a17/content.htm
    First configure CCMS in XI System:-
    /people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
    For Monitoring in the CCMS:-
    http://help.sap.com/saphelp_nw04/helpdata/en/4d/6272376d3bfa2be10000009b38f8cf/frameset.htm
    Go thro' this link for configuration scenario:-
    /people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1
    Inbound ABAP Proxy Trace and error handling
    Handling Exceptions
    ABAP Server Proxies - Fault Handling
    Exception handling in integration processes
    ABAP Proxy and fault messages
    /people/bhanu.thirumala/blog/2006/02/07/abap-proxy--xml-to-abap-transformation
    regards
    Aashish Sinha
    PS : reward points if helpful

  • Mapping and Error handling in Seeburger Adapters ?

    Hi,
    1.   In B2B integration part of PI.Whats the way of doing mapping in XI mapping editor and error handling in the mapping ?
    2. Do you think SEEBURGER BIC mapping designer is must for developing maps ? cant we develop same maps in XI mapping editor?
    Thanks and regards,
    Ram.
    Edited by: Ramakrishna kopparaju on Sep 30, 2008 12:27 PM

    Whats the way of doing mapping using seeburger adapters
    The standard mappings are part of Seeburger Suite and if any additional mapping has to be accommodated, then custom mapping could be developed in Seeburger BIC Mapper tool. This has to deployed on adapter engine then. The other mapping is the normal XI mapping (message, java, xsl) which could be performed based on business logic.
    error handling in the mapping ?
    The easiest way is to raise Alert based on the errors in mapping.
    Regards,
    Prateek

  • JCo Client Programming and Error Handling

    Hi all,
    I was wondering if anybody could help me out with some advice on error handling when writing code to send messages to SAP via a JCo Client, particularly IDocs.
    I understand from my reading that IDocs are always sent asyncronously to the SAP system from JCo, using JCO.Client.send(). So it is possible (and I have some test code working to do this) to force an exception with say a malformed IDoc, and catch the exception in my code.
    But due to the asyncronous nature of the send functionality for IDoc, I cannot see any way of getting back any "business level" exceptions (e.g. Order Number does not exist, Unknown Material, etc.)
    So my question is, is it possible to receive any of these type of error messages when sending IDocs to an SAP system using JCo? Perhaps by setting up a JCo Server with the correct error/exception listeners to receive these messages - but are they even sent out in the way?
    If not what is the process for handling them?
    It is of course possible to look in the SAP system using txn WE02 and see the problem/error but that does not help me to propagate this back to the sending application or to maintain state alignment between the two apps.
    Any advice much appreciated!!
    Chris

    Hi Anil,
    you should check on those trheads:
    <a href="https://www.sdn.sap.com/irj/sdn/thread?messageID=3104772&#3104772">https://www.sdn.sap.com/irj/sdn/thread?messageID=3104772&#3104772</a>
    <a href="https://www.sdn.sap.com/irj/sdn/thread?messageID=579794&#579794">https://www.sdn.sap.com/irj/sdn/thread?messageID=579794&#579794</a>
    Regards,
    Gianluca Barile

  • Transaction and Error handling in Mediator 11g

    Hi Experts/Gurus/All,
    We have following scenario in Mediators :-
    For Inbound Interfaces :-
    M1-->M2-->M3
    M1 calls M2 and M2 calls M3
    There are 3 mediators, Mediator#1(M1),Mediator#2(M2) and Mediator#3(M3)
    M1 performs a FIle Read and do a ABO-->OAGIS conversion
    M2 performs routing
    M3 performs a OAGIS -->ABO(JDE E1) conversion.
    Now,we are in middle to decide the Fault Handling Mechanism for this case.
    M1 is Asynchronous , M2 is Synchronous and M3 is also Synchronous.
    Question is :
    1. M1 will start a new Transaction,Do M1 will propogate the same transaction to M2 which,as being Synch,propogates the same transaction to M3 ?
    2. How will the commit and Roll back will be taken care of?
    3. What if M1 errors out?
    4. Whatif M2 errors out?
    5. What if M3 errors out?
    In question 3,4 and 5:
    What will happen will the Full Transaction ? If M3 erros out,would the Entire Transaction Propogated by M1 will be roll back?
    Also ,How about Error handling in this case:
    Do I need to create seperate fault-policy.xml and fault-binding.xml for M1,M2 and M3 ?
    Another Scenario is of OUTBOUND interfaces :-
    M1-->M2-->M3
    M1 calls M2 and M2 calls M3
    However , M1,M2 and M3 are all Asynchronous.
    In this scenarios how would I handle following :-
    1. If M2 Errors out,I need the entire Interface which comprises of M1-->M2-->M3 to roll back?
    2. If M3 Errors out,I need the entire Interface which comprises of M1-->M2-->M3 to roll back?
    3. Seperate Transactions means I have to create seperate fault-policy.xml and fault-mapping.xml to handle errors?

    Hi,
    You could create a package, and use the OdiSqlUnload to export the data into a flat file (csv) from snp_check_tab, then amend it. Then create an interface to load the data from the flat file to your tables, either via external tables or SQL Loader.
    Question is, why are you amending data going from source to target? there surely has to be something wrong with the Architecture (especially if you are getting errors in production). If you amend data, so that it is different in source as it is in target, then when it comes to regression testing, this will never match.
    The errors should go be fixed at source, and either you, or the business should have access to do so.
    Cheers
    Bos

  • Alerts and Error handling in BPM Async/Sync Bridge

    Hello All,
    I am developing an Async/Sync Bridge in BPM for sending a request from ECC webservice asychronously to a front end application synchronously using BPM Async/Sync Bridge. I get a response from the front end to PI and stays there.
    It wont be send back to ECC. What are the possibilities of error handling required in this type of scenario.
    Thanks
    Deno

    . I get a response from the front end to PI and stays there.
    Then it should mean that the BPM design is faulty...did you have a send step at the end which closes the Async-Sync Bridge by sending the message to original sender?
    In SXMB_MONI --> For BPM message processing there will be a link called PE...click it...check the graphic workflow...see till where the message has processed.
    error handling
    include your Sync send step whithin a Block....this block will have an Exception Branch....in this exception branch you can have your Exception handling logic...like raise alert, cancel process etc.
    Regards,
    Abhishek.

  • JMS adapters and error handling

    Dear all,
    1. I have a scenario in which XI will be getting messages from Two JMS servers located in different locations. The messages from the two servers have no relation but XI has to check if messages are present in any of the servers and poll them. So can anyone suggest me a better approach. I can use two sender adapters and use a BPM. Is there any other way to do it avoiding BPM?
    2. How do I delete the message from the JMS Queue once it is processed?
    3. In the Reciever side I have to send messages to two different target systems based on a condition. From the sender side a field (value) is passed which will check these conditions. If the value contains one of the target system names, the message has to go to that particular system and if the value contains both the target system names, the message has to go to both the target systems. I think this can be done in BPM but please recommend an approach for this.
    4. I need to do error handling both in the adapter side and in mapping level. Kindly give suggestions for the same.
    Expecting your replies soon,
    Harikumar. S

    Hi ,
    Refer to following blogs ,
    JMS Adapter
    http://help.sap.com/saphelp_nw2004s/helpdata/en/cd/d85a9d6fab7d4dbb7ae421f710626c/content.htm
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/3.0/how%20to%20use%20the%20content%20conversion%20module%20with%20the%20xi%203%20j2ee%20jms%20adapter
    /thread/217893 [original link is broken]
    JMS adapter -Message format pre-requisites
    /people/alessandro.guarneri/blog/2006/01/04/jms-sender-adapter-handling-too-short-lines
    /people/william.li/blog/2006/11/13/how-to-use-saps-webas-j2ees-jms-queue-in-exchange-infrastructure
    Thanks ,
    Suvarna
    Award pts if ans helps .

  • Alerts and Error Handling

    Which is the best way to handle alerts in XI and Why:
    AlertFramework in the runtime workbench, CCMS etc?
    Also which of the options provides the functionality to view all alerts in Solution Manager?
    Basically we want to set up the systems so that the support after go live can deal with errors quickly and efficiently even if they are not XI experts...

    Hi Ricardo Mendez ,
    As I know, we can create alerts in XI to gine a mesasge which inform the particular person about the error occured in the maping objects(not only in mapping, but in other cases also ).
    To define the Alert use Tcode ---> ALRTCATDET
    To check the alert messages -
    >ALRTINBOX
    You can use the following links to get more.
    /people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
    http://help.sap.com/saphelp_nw2004s/helpdata/en/9c/34193cb4f5131de10000000a11405a/content.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/8a/3e2d4105f8d92be10000000a1550b0/content.htm
    /people/sap.india5/blog/2005/12/06/xi-ccms-alert-monitoring-overview-and-features
    Regards
    sreeni

  • Applescript and error handling

    Hi,
    is there something like error-handling for applescript in general or just limited to special actions/functions like "try" ?
    i want to optimize my applescript app just for the case that it could be needed.
    Best regards
    fidel

    To elaborate a bit, error handling in a 'try' block is implemented with the 'on error' statement. The simplest use is something like this pseudo-script :
    try
    {script steps that might produce an error}
    on error
    {script steps for the error condition}
    end try
    'on error' optionally will return information about the error. Most widely used are the error message (text) & the error number:
    try
    {script steps that might produce an error}
    on error errMsg number errNum
    {script steps for the error condition using the variables errMsg and/or errNum}
    end try
    The second form allows you to detect & handle specific errors.

  • How can I use a variable for an interface log and error fle

    I want to use a variable for the interface's log and error file so that when I migrate from Dev to QA to Prod I don't have to do a lot of editing.
    Specifically on the "flow" tab for the "target", I want a variable to be the first part of the path for the log (\\sundev1\fnd1-hypd1) and join this with the rest (\update\log\logfile.log) within the LOG_FILE_NAME field.
    Thank you!

    Hi,
    It is quite simple....
    just use the <%=odiRef.getSchemaName("D")%> before the file name and configure both path in the topology linked to each context.

  • Customized error messages and error handling?

    Hi All ,
    how can we Customized error messages?
    and how we can do error handling in Sibel Analytics ?

    The ADF Developer Guide has a section about "Handling and Displaying Exceptions in an ADF Application", this will explain how to display errors in a new page.
    All you need to do is have the navigation to this page use the dialog framework.

  • Custom Validations and Error Handling

    Hi
    I have a requirement that I have to use the custom validation and the errors and/or exceptions should display in the page. All the errors needs to be displayed in the page at the same time.
    Suppose If i have two fields like...1)First Name and 2) BirthDate ...both are required fields. If user does not enter any values for both the fields, the errors should display in the page like 'First Name is required! Save Failed' /n
    'Float the mouse cursr over the red arrows to see the filed serror mesg'. So all the errors in JSF page should be recorded and displayed when user mouse over taht particular component.
    I am new to JSF. Can you please anybody tell me what is best way to implement this in JSF?

    We should not use the JSF built-in validation framework and desiging the custom validation. For that we are writing the validate() method in BackingBean.
    My Requirement is as follows...
    Capture all the errors in JSF page and display the same JSF page with all the errors.
    For example: If I have 5 fields in form, and 3 fields out of it fails in validation ...we need to show the page with all the fields and some kind of Red border and arrow on the fileds that are failed in validation.
    Also in the bottom of the page we need to display the first field error mesg .....
    -- Suppose say First Name, Last Name, DOB, Gender, Field5 are the fields and only Last Name, DOB and field5 are failed in validation...
    Then we have to display in the botton of the page **{color:#ff0000}'Last Name is required! Save Failed{color}**' along with this,
    We need to display the mesg *{color:#ff0000}''Float the mouse cursor over the red arrows to see the filed error mesg'{color}*. -> This means we are dislaying the page with red arrows on the fileds that are failed in validation.
    So when user mouse over in the arrow...we should display the error message for that particular field.

  • One of the IDOCs has an specific error message (status 51 Idoc not posted)

    Dear Experts,
    ple. provide the solution for my issue.
    In my list of compaines one of the company had an external partner(warehouse) who takes care of their products.
    Communication between that external partner software and my system(PVS) is happen through IDOCs.
    But one of the IDOCs has an specific error message ( status 51 and status text : Specification for units and quantites containe error),
    acctually we are receiving picking meterials from the external system to my system.
    I can able to see the Inbound Idoc and status, I am not able to see the Outbound Idoc, then how can I test why its happening this problem and I how can I give the analysis properly please suggest me.
    Thanks in advance
    Suresh

    Suresh,
    Welcome to SDN. Adding to Jürgen Comment, Just double click on status 51 (at node), then in next screen there will be one information (long text) button, just click on it. Some times it will give good details about the error. the information can also suggest direct trasaction to correct the customization, some times!
    try for ur case.
    Reddy

Maybe you are looking for