For inbound and out bound interface
what is inbound interface and outbound interface.what is diff b/w inbound and outbound interface.
thnx
Hi,
The interface through which data comes inside SAP is inbound interface on the other hand the interface through which data goes out of SAP is called outbound interface.
Rgds
Mayank
Similar Messages
-
hi all
can anybody give ,when we do inbound and outbound delivery
regards
bhavaniHi
<b>Inbound delivery</b>
The significant advantage of depicting the goods receipt process through the inbound delivery function is that the company can execute many processes in advance, even before the actual goods receipt posting takes place. In this case, all the necessary information is available beforehand as notification of the inbound delivery will be released ahead of time by the supplier.
The inbound delivery describes exactly which materials or pallets can be received on what date and at what time.
The following functions are available with the goods receipt process for inbound deliveries:
Material availabiltiy status for MRP run
Batch information
The batch split that is already possible for outbound deliveries is also available for inbound deliveries, since batches are often first identified in the inbound delivery.
Inventory management of packaging materials
Goods receipt for inbound deliveries
Determination of goods receiving point
<b>Outbound delivery:</b>
Outbound delivery is similar to Inbound delivery.Before Goods issue to Customer against Sales order, Out bound delivery ill be created contains all the information like shipping-planning information , Quantity etc.Based on this document, picking and packing will be done.after all the required processes completed, then Post goods issue will be done.
Outbound delivery supports all shipping activities including picking, packing, transportation and goods issue. During the outbound delivery process, shipping-planning information is recorded, status of shipping activities is monitored and data accumulated during shipping processing is documented. When the outbound delivery is created, the shipping activities, such as picking or delivery scheduling, are initiated, and data that is generated during shipping processing is included in the delivery.
Process:
Inbound Delivery:
PO -> Inbound delivery -> GR
Outbound delivery
Sales order-> Outbound delivery - > goods issue
Regards
Ramakrishna -
Inbound and out bound problem at we 20
hi
in bw system at we20 tcode
i have out bound is
RSRQST
inbound is
RSINFO
REEEND
in ecc system
outbound is
RSINFO
REEEND
inbound is
RSRQST
is the sequence is correct or not?
ple let me knowOUTBOUND parameters:
- RSINFO: Enter the port that you found or created in step a).
The package size is 1. Select the option "Pass IDocs
immediately" as output mode. The basis Idoc type is RSINFO.
- RSSEND: Enter the port which you found or created in step a).
The package size is 1. Select the option "Pass IDocs
immediately" as output mode.
INBOUND parameter.
Enter message type RSRQST
The process code of the message type is RSRQ. Select the option "start immediately".
Thanks
Reddy -
Telesales Inbound and Out bound
Hi,
Can any one please help me out with the configuration documentation related to Inbound and Outbound Telesales which needs to done before creating Interaction Center WinClient Profiles along with configuration related CTI.
Regards
VinodOUTBOUND parameters:
- RSINFO: Enter the port that you found or created in step a).
The package size is 1. Select the option "Pass IDocs
immediately" as output mode. The basis Idoc type is RSINFO.
- RSSEND: Enter the port which you found or created in step a).
The package size is 1. Select the option "Pass IDocs
immediately" as output mode.
INBOUND parameter.
Enter message type RSRQST
The process code of the message type is RSRQ. Select the option "start immediately".
Thanks
Reddy -
In-Bound & Out-bound interfaces list of GL, AP & PO modules
Hi,
GoodDay, I'm working with GL, AP & PO modules. Please let me know both In-bound and Out-bound interfaces list of those three modules.
Regards,
Ram.For 11i, these are listed at http://irep.oracle.com
HTH
Srini Chavali -
What is meant by in bound and out bound delivery
hai sap sd gurus,
please tell me, wht is meant by in bound and out bound delivery?>
peruru sreenivas wrote:
> hai sap sd gurus,
> please tell me, wht is meant by in bound and out bound delivery?
Hi Sreeni,
See any delivery that is inbound i.e. bound to come in like Returns from Customer or Delivery from a Vendor to us or any other delivery which is coming to us.....
Similarly any delivery that is outbound i.e. bound to go out like the deliveries we do to customers are Outbound deliveries
Reward if helpful
Regards
Abhishek -
In WM is it possible to have a TR's for Inbound and Outbound deliveries?
Hi All,
In WM is it possible to have a TR's for Inbound and Outbound deliveries?
In WM is possible to create a TO without TR being created?
Please let me know the configuration for the same!
Thanks in advance,
KumarThe delivery itself is treated as transport request, hence you cannot get an extra TR.
Using LT01 with movement type 999 will create a TO without needing any TR. -
Hi,
I have a cRIO-9014 with a NI9505 DC brushed servo drive module, and I would like to program the FPGA for PWM and Quadrature encoder interfacing using the intellectual property IP functions mentioned in the "CompactRIO Motor Control Basics Tutorial":
Quadrature Encoder dX Method (FPGA, Use in SCTL).vi
Pulse Width Modulation (FPGA, Use in SCTL).vi
I made a search at ni.com/ipnet but I couldn't find them.
Where can I find free downloadable IP cores for PWM and encoder blocks to include them in my FPGA interface program?
Thanking you in advance,
Manuel
Solved!
Go to Solution.Found by myself (google search!) at:
https://lumen.ni.com/nicif/us/codepowelecguide/content.xhtml -
Hello All,
Can some body explain what is meant by a Queue.
Why do we require queues to transfer the the data
In our land Scape we have XI through XI messages(Pay load) are transfered
My question is Now a days many of the customers implementing XI
So do we require Queue registration
If Yes please explain me breifly.
Thanks &Regards,
Praveen Kondabal.Hi Praveen,
XI messages for inbound processing are placed in inbound queues of Integration Engine and placing them in outbound queues carries out outbound processing. As a part of Integration Engine configuration, we register XI queues. By registering queues used by the Integration Engine, we intimate qRFC the technical names of these queues
Do refer these ~
/people/sap.india5/blog/2006/01/03/xi-asynchronous-message-processing-understanding-xi-queues-part-i
/people/vasanthakumar.balasubramani2/blog/2005/12/21/complete-reference-for-idoc-queuing-and-monitoring
/people/sap.user72/blog/2005/01/28/setting-up-inbound-qrfc-queues-for-serializing-idocs-using-the-idoc-adapter
http://help.sap.com/saphelp_nw2004s/helpdata/en/7b/94553b4d53273de10000000a114084/content.htm
Regards,
Madhu -
Hi,
I am currently working on a project with the following requirements
1. Client transfers binary document (between 1-20MB in size) from OSB proxy to SOA composite to Content Management system
2. Client retrieves binary document (between 1-20MB in size) from Content Management system to SOA composite to OSB proxy
In otherwords, a inbound and outbound integration.
What I have tried so far and my results:
Scenario A
1. Enabled MTOM on SOA composite by attaching wsmtom policy
2. Created an OSB business service and consumed the SOA composite application
3. Enabled MTOM on OSB proxy and business service and configured it to pass by reference
Scenario B
1. Enabled MTOM and security on SOA composite by attaching wsmtom policy and SAML policy
2. Created an OSB business service and consumed the SOA composite application
3. Enabled MTOM on OSB proxy and business service and configured it to pass by reference
I have a demo integration setup that writes a binary document to a file using the above steps. My SOA composite has a file adapter that writes the binary data to an external file and it is exposed as a web service with a simple WSDL definition that has an inline XSD schema with an single element of base64binary type. I have added a mediator that maps this base64binary element node to the file adapter's input node.
Result for Scenario A with file size less than 1 MB:
Flawless execution with sub-second response times
Result for Scenario A with file size of 8MB
First attempt: SOA composite faults with database transaction related error, solved by increasing JTA timeout
Second attempt: Flawless execution, but file transfer took over 100 seconds to complete. This is very poor performance and my suspicions are that this cannot be the expected behaviour, but I dont know the internal workings of the SOA composite and why its taking this long.
Result for Scenario B:
The OSB business service does not accept/recognize the SAML policy in the WSDL and suggests to configure OWSM policies manually, but OWSM policy in OSB does not have the wsmtom policy. Regardless of this, any permutation of MTOM + WSS security in this integration scenario either did not work outright or MTOM optimization was not happening ie binary data was materalizing in the message body.
I have only about 3 weeks left to implement a viable solution and the closest ive come to a solution is Scenario A but that +100 second response time for an 8MB file is really worrying.
I would appreciate any level of guidance, recommendations or suggestions as to how I go about tackling this problem.
Thanks
regards,
JohnnyI think this is due to the underlying mechanism of weblogic classloading..
You can contact oracle support @ https://support.oracle.com to report issues. Roughly this is the process .
1- get the Oracle Customer Support Identifier (CSI) for the client you are working for.
2- Create a user profile quoting the CSI. This will send an approval request to oracle support admins at your client.
3- Get the oracle support admins at your client site to approve your request for support access.
4-Once they approve , you can access the support site and raise service requests. -
i am trying to link one of my accounts into my phone and am asked for incoming and outgoing mail servers. whats that then?
Your Internet service provider maintains the servers for sending and receiving email. Ask them for the prospered names of the servers and whether you need to enter your password and user name to send mail.
If you use gmail or some other web type email service they should provide that information to you as well. -
Unit test plan for inbound and outbound interfaces
I am trying to create a UNIT TEST PLAN for an interface. In this interface a flat file in IDOC format is picked up from the application server and processed using EDI_DATA_INCOMING for the relevant posting ( example : Sales order creation from a PO IDOC). IF the file is not in IDOC format then it is reformatted to the IDOC format manually.
In second scenario(outbound), after sales order creation or billing document creation, IDOC is created which is read and a custom flat file is created and sent to a middleware.
PLease suggest a unit test plan for these kind of scenarios or send a sample UTP if possible.
REgards
Nishant
PS: points will be awarded to helpful answers.Unfortunately this isn't possible, the esa has only one routing table. You'll have to add specific routes for your internal networks.
I usually avoid two-armed setups because of this and it gets even worse if you want to use virtual gateways (traffic gets sent via the internal interface with an IP from the external interface) -
Ale transcation data uploading for outbound and in bound system
hi,
can any tell me what is idoc trirrering prgm when we uploading transcational data for invoice in outbound, inbound system. if u have brief information ALE outbound interfaces for transactional data such as invoice and SD send mehi bharathi j
go through these links
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
Check these step-by-step links
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/ccab6730-0501-0010-ee84-de050a6cc287
https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/8fd773b3-0301-0010-eabe-82149bcc292e
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/3c5d9ae3-0501-0010-0090-bdfb2d458985
regards
Nagesh.Paqruchuri -
Using two different sound devices for in and out
Hi,
I want to do the following:
For speakers I have the Logitech Z-10 that have an internal usb sound device. Sadly it hasn't a connector for a mic.
Nevertheless I'd like to use a microphone for teamspeak or ventrilo.
My mainboard has an onboard sound chip that I used before I had the Logitechs.
So my question is, can I use the usb speakers and the onboard chip simultaniously - one for out and one for in?
I alread adjusted my modprobe.conf so that every device has its index number but I don't know how to proceed.
Regards
BarghestYou're right. In ventrilo I can chose different devices.
TS2 is not working att all. I can't neither hear nor use the mic. There's no option for selecting the device.
\edit: Ok, I installed TS via wine. Works like a charm. What a pitty that TS doesn't work under arch
Last edited by Barghest (2009-05-17 16:24:25) -
Hi all
iam having scenario , where i have select some data from SAP tables to other system using Interface . So i need to put this data in a File at application sever . From here , the data will proceeds to other system.
When our interface triggers it will undergo certain data mapping and translation rules. Once the data mapping is done SAP will generate data in a fixed delineated format which will then uploaded or read by the other system iterface. This part iam unable to understood?
Give me how i need to proceed for the above cases.
regards
venkatUse fnd_profile.value (your_profile_name) in your code.
Hope this answers your question
Sandeep Gandhi
Maybe you are looking for
-
Copy File from Terminal Server to Workstation Failure
Hi For years client have been able to copy files from our Windows 2003 Terminal Server to their local workstation using: copy myfile \\tsclient\mydrive\myfolder However we upgraded to Windows 2012 Server R2 and now Windows 7 Pro clients cannot copy f
-
After updating my iPhone 4S to IOS6 my iPhone does not appear in iTunes.
After I updated my iPhone 4S to IOS6, I experienced the following issues. 1. My iPhone would not connect to WIFI, even though the WIFI icon on my iPhone indicated that it was. This in it self cost me $239.00 in excess data usage. I have since got the
-
hi my requirement is that, i have to get the revision level for each material number in a specific plant, is there any function module which can get this data, actually this revision level has to be brought from table AEOI table, but its key fields a
-
Media and projects dissapear when i restart fcpx
All is ok while i edit,but once i close fcpx and restart it the media and project files are not there ....the red frames come with exclamation mark
-
MSN messenger telling me I have the wrong password
All forms of msn messenger and Im+ and IMO. Facebook will sign in on the latter two but msn tells me I have the wrong password( I don't)