For incoming calls ringtone not working

My incoming calls are only identifiable with display to ANSWER or DECLINE.   I. Can get vibrate to work  but ringtones not working.  I am missing many calls
because of no ring.  I did shut down my Bluetooth earpiece so unsure what happened.

These are a couple of articles that might help.
http://docs.info.apple.com/article.html?artnum=305740
http://docs.info.apple.com/article.html?artnum=305744
Try a reset first then if that does not work, you might want to restore.

Similar Messages

  • No sound for incoming calls but it works using speaker and earpiece. I can't hear anything but the other party can hear me clearly. I was told it's hardware problem. Would anyone please help? Thanks

    No sound for incoming calls but it works using speaker and earpiece. I can't hear anything but the other party can hear me clearly. I was told it's hardware problem. Would anyone please help me? Thanks

    This is an annoying problem for many people. Most likely your dock connector (on the bottom where you plug in your phone) is dirty or screwed up and is probably just coincidence that it happened after you updated. Some people have had success cleaning the port with a dry clean tooth brush. There is a long discussion going on at the thread I linked below. Good luck...
    https://discussions.apple.com/thread/2475631

  • My i phone ringer is giving me a lot of trouble. It does not play any sound or music, the incoming call ringtone is working, but no music is playing. The problem itself disappears , and then reoccurs again. Anybody with same kind of problem, plz help !!!

    the iphone ringer is not working, the incoming call ringtones are playing , but ringer volume bar has disappeared. The problem itself gets fixed at times but i'm having a real tough time . I have almost tried evrything from resetting the phone, switiching it off and do it gain, but nothing seems to work. A nybody with anykind of knowledge reguarding this problem, please help!!

    Unfortunately, this is not Apple, but just the iPod Community forum, of iPod Classic end users, who shares your angst. You can post it to iPod Feedback

  • IPhone 5 outgoing and incoming SMS works but incoming calls do not work. The dialler gets message this number is not in available in network.

    New I phone outgoing calls as well incoming SMS works but can not receive incoming calls. Caller gets the number does not exist in network.

         Like Superman, here I am to save the day! I can help you with your service in your home area dizzymslizzie. Let's start with what zip code are you in? Can I assume that there isn't any physical or liquid damage on the iPhone 5? Recently, there has been an update to the iPhone to iOS 7. If you have done this update then please provide the exact carrier version that's installed. Keep in mind that there is a difference in device performance between iOS 7 and the iOS 7 beta version. As you share this info, I will check the area to re-affirm that the issue is or is not network related.
    Thank you...
    ArnettH_VZW
    Follow us on Twitter @VZWSupport

  • Ignore incoming calls occasionally not working

    I've run into odd behavior that happens intermittently on the Tour device.
    An incoming call comes in. The user presses the red key to "ignore" the call. The incoming call temporarily halts, but then resumes ringing the phone. Pressing the red "ignore" key again yields the same results. This happens maybe 1 in 5 incoming calls. The rest of the time the red "ignore" key works as it should - rejecting the call.
    Is this a known issue in the Tour? Is there a patch or work around?

    The Network Preference is checked, to Notify me of incoming calls while connected to the internet.

  • Skype numbers are BROKEN incoming calls do not rin...

    I paid for a Skype number.  It used to work fine, people would call, and Skype would play the ringtone and I would answer. 
    NOW IT'S BROKEN. 
    One of the latest releases of Skype broke this and there is no Skype support to report and get problems fixed.  This is mentioned many times in these forums and Skype will not address the issue.   Just search for "incoming calls do not ring"

    I am having this issue with an iphone 5/iOS 6. I can receive calls without issue when I have the Skype App open, but if it is in the background, the caller gets a message like "The person you are trying to reach is not available." if voice mail is turned on, or the phone just rings and rings if I have voice mail turned off.
    I've confirmed that alerts and other settings in Notification Center are setup as expected. Not sure why this isn't working.

  • After update to OS4.2.1 I can not get the ringer to work for incoming calls

    after update to OS4.2.1 I can not get the ringer to work for incoming calls. If I set Vibrate on, that's the only notification I get. Tried everything including blowing away ALL my apps and restoring phone to new. Lost all my apps but the ringer still won't ring

    God Bless u! LOL I have an otterbox case on my phone and had no clue that the mute button was there....Thank you so much!! The volume on my movies & everything else worked...even when I would go into "settings" and adjust the volume of the ringtone. I knew it was something simple...Thanks again..

  • CALLER ID not working for International incoming calls

    Hi,
    I've a strange issue where CALLER ID not working for International incoming calls, it shows INTERNATIONAL UNKNOWN NUMBER in the phone display, but the number shows correclty in Verizon Call assistant !!!
    Any clue?

    yashshankar wrote:
    Hi
    I recently  purschased an Online number but the caller id does not work for incoming calls.How do we resolve this problem?.
    Regards
    Yash
    You didn't mention what country your Online Number is in.  Not all of Skype's Online Numbers are eligible for use as Caller ID when calling telephones or sending SMS messages.  If your number is from one of these countries (Chile, Denmark, Estonia, Hong Kong, Poland, Sweden, the UK and the US), then it can be used this way.  Otherwise, you can use a mobile number from countries other than Japan or Mexico as Caller ID with Skype, after the number goes through a verification process where Skype sends SMS messages with codes to that number.
    To get to these settings, log into your Skype account here on the Skype web site using the "Account" link at the top of this page.  You'll see a screen that would include your current Caller ID settings, and a link to change that.  If your Online Number is from one of those countries I referenced above, just select it and you're done. 
    Hope that helps!
    Patrick
    Location/Ubicacion: Arizona USA
    Time Zone/Hora Local: UTC/GMT -7
    If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
    Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
    I am not a Skype employee. No soy un empleado de Skype.

  • TS2634 My iPhone 4s does not ring for incoming calls. Ring tone is set/settings/sound. It used to ring. I think it has to do with updating to IOS 7.0.4? After updating IOS 7.0.3 my microphone stopped working. Had to clear/reload.

    My iPhone 4s does not ring for incoming calls. Ring tone set and used to ring. I think it has something to do with updating the IOS 7.0.4. When I updated to 7.0.3 the microphone stopped working. Had to call Apple Support and cleared phone and reloaded. ($57 charge). Any suggestions?

    Start with your finger at the bottom of the screen (about even with the home button) and swipe in an upward motion.  There should be a row of icons at the top of a grey field.  if the quarter-moon icon is bright white, tap it.  If it was (and still is) dark, take the iPhone in to be evaluated by a qualified technician.

  • My new iPhone 5S will not ring for incoming calls.  It vibrates. I've tried suggested tips for iPhone 4 but it doesn't work for 5S.  Please help!!

    Can anyone help.  My new iPhone 5S does not ring for incoming calls.  It vibrates.  How can I get ringer to work?

    Hello lyngos,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/TS2802
    If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
    If the iPhone is paired with a Bluetooth headset or car kit:
    Try turning off Bluetooth.
    If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
    Restart the iPhone.
    If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
    Best of luck,
    Mario

  • HT201401 Incoming calls do not ring on iPhone, only vibrate.  All settings are selected for ringtone to be audible, I have restarted phone, went back to factory settings, still no sound on incoming calls.

    Incoming calls are not heard, only vibrate.  I have reset the phone back to factory settings and still do not get any ring tone sounds for any incoming calls.  The phone only vibrates.  I have checked all setting including volume and do not get any sounds from the phone on incoming calls. 

    Check the Mute / Silent Switch on the side of the phone...
    iPhone User Guide

  • Bluetooth no longer works for incoming calls after recent update

    When I updated my Bluetooth to iOS 6, the Bluetooth no longer works for incoming calls. I press button to answer call, it makes a small cracking noise, and then sends the call to my phone. I can use the Bluetooth for outgoing calls and it works just fine. I was hoping when I updated to iOS 6.0.1 that the problem would be fixed. I have uninstalled and reinstalled Bluetooth but that has not helped either. I am frustrated. I have a LG HBM-905 Bluetooth that I loved prior to this problem.

    Magically started working today after I synced.
    Post relates to: Treo 700w (Verizon)

  • After update to IOS 4.3.5 my Iphone incoming and out going calls is not working properly and I have to remove the SIM regulerly to conduct or receive a call

    after update to IOS 4.3.5 my Iphone incoming and out going calls is not working properly and I have to remove the SIM regulerly to conduct or receive a call
    It is not practicale to do this always any one faces the same problem

    There may be a problem with the SIM card. Get a new SIM card from your carrier - there should be no charge for a replacement.
    If no change with a new SIM card, the standard troubleshooting steps in order are:
    Power your iPhone off and on.
    An iPhone reset, which is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release.
    Restore your iPhone with iTunes from your iPhone's backup.
    Restore your iPhone with iTunes as a new iPhone or not from your iPhone's backup.
    If no change after any of these steps in order, your iPhone has a hardware problem.

  • Ringer doesn't work for incoming calls

    My iPhone 4 ringer won't work for incoming calls. It is not on vibrate only and the ringer works through the earphones when earphones are connected. Any suggestions?

    Thank you so very much.
    . Simple yet perplexing.. I bought the waterproof case and had them put it on before leaving the store.. GRANTED, I never read the instructions.. Just knew it must have been something in the way I programmed the phone. I especially loved that you put up an illustration with your explanation. 
    Mahalo,
    Donna Jo

  • Please help ... have new samsung ativ se windows 8 phone ... screen lock is on to require password, but on incoming calls its not locked ... how do i lock it for incoming calls too ???? thanks

    please help ... have new samsung ativ se windows 8 phone ... screen lock is on to require password, but on incoming calls its not locked ... how do i lock it for incoming calls too ???? thanks

    Personal rant, why do people write the entire problem in topic line
    It's not possible with Windows Phone 8.  What's the point, a call is coming in and the phone allows you to answer.

Maybe you are looking for