For iview

Hi guys,
Is there any iview to perform same as transaction vieiw in SAP EP?
Thanks,
Rajesh.

I have used SAP GUI for HTML, but I am getting the errors
SSO logon not possible; cookies must be activated in the browser
Choose "Logon" to continue A dialog box appears in which you can enter your user and password
No switch to HTTPS occurred, so it is not secure to send a password
What are the settings I need to do?
Thanks,
Rajesh.

Similar Messages

Deployed application from NWDS not available in local folder for IView crea

Hi Gurus,
I have deployed an Web Dynpro Java application from NWDS. The application deployed fine.
But when I tried to cretae the Web Dynpro Java application from the Portal the corresponding application is not available in local folder for IView creation.
How do i need to proceed for Web Dynpro Java IView creation.
Thanks & Regards,
Kiran Kumar k

Hi Kiran,
Please check under sap.com/local OR you custom package while creating Web Dynpro Java application iview.
Then select your WD Application if you found - Applcaition >> package >> then select Application name and click on next.
Verify your application deployed or not or in which folder at content administration >> web dynpro >> searh your WD application.
Hope it helps
Regards
Arun

Doubt in configuring entry points for iviews

Hi, I have followed the steps of the help about configuring entry points for iviews:
1.-> in the pcd I have created a folder to store iviews for WPC.
2.->I have gived read permission.
3.->I have desactivated the hide root folder check por pcd repository.
4.->I have created a folder in km.
I am loosing in the step "Create a entry point for the folder that you created in step x".
How link the pcd folder that store the iviews with the km folder?
when I try to create a entry point I only can see km folders, How can I choose my pcd folder?
Thanks.
Regards.

Try this:
Procedure
1. Choose System Administration → System Configuration → Knowledge Management → Content Management → User Interface → Mapping → Component.
2. Edit the wpcDragExplorerEntryPoints configuration object.
Use the following parameters:
Parameter: Description
displaymode:Specify select
maxproviderprio: Highest priority number that standard entry points can have and still be displayed in the Web content browser
entriesperrow: Number of entry points displayed in each row (default: 5)
entrypointsprefix: Prefix of the entry point repository: If you specify a value for this parameter, standard KM entry points are also displayed in the Web content browser.
Default: /entrypoints
sharedcontent: Semicolon-separated list of paths to be displayed as global entry points for shared content
Examples of parameter values (for sharedcontent param):
displaymode=select,maxproviderprio=30,entriesperrow=5,entrypointsprefix=/entrypoints,sharedcontent=/wpccontent/Cross-Site Content;/pcd

API for Iview to change its propeerties height and width

Hi ,
i need the API for Iview to change its proiperties like height and width and to assign iview to role,
Regards ,
venkat p

Hi,
Check this to set height & Width to Iview:
Setting iView Parameters
To assign iview to role:
Adding a Role To another Roles by program
http://help.sap.com/saphelp_nw2004s/helpdata/en/5f/cf9d4207e1c86ae10000000a155106/frameset.htm
Regards,
Praveen Gudapati

TRex search for iView

Hello, I was wondering how to do make the TRex search for the content in iViews and link to those iViews into the portal when the TRex send the results for search. Right now the TRex searches in the repositories specified in the datasource and the results link to the content of documents. Any ideas?
Thanks.

Hi Pablo,
> I'm starting to think I will have to pass
> some fee for all your help
Don't hesitate, I can pass you my bank account details...
> I've seen this forum ...
Oh, don't mix up the PCD repository which can be searched for iViews ==> that is iView names, maybe description etc, but this does not mean the content itself.
As far as I understand your original question, you would like to search "real content" ("what's printed within the iView") in that kind that clicking on a search result link would lead you to the corresponding navigation target.
For this, the scenario given in my orignal answer in this thread should be the way to go. Even if this works only in "internet" scenarios properly, for this scenario cannot distinguish between different roles / access rights.
> is SPS 14 the same that SP14?
Yes. "SP" = "Support Package", SPS = "Support Package Stack", the "new" common number for all components playing together.
Hope it helps
Detlev

To get list of permissions for iview/apps with the help of API (UME API?)

hello all
who can answer how to get list of permissions (list of roles or users) for iview or other application with the help of API (UME API ?)
thanx!

if anybody whant to know
https://media.sdn.sap.com/html/submitted_docs/60_sp2_javadocs/ume/com/sap/security/api/acl/IAclManager.html#getAcl(java.lang.String)
https://media.sdn.sap.com/html/submitted_docs/60_sp2_javadocs/ume/com/sap/security/api/IRole.html

Missing IMG entry - "Reuse country specific services" for iviews

Hi all,
We have experienced a problem related with an IMG activity which we couldnu2019t found:
u201CReuse country specific servicesu201D.
We need this for iviews to be used for different country grouping (in our case we have to use 99).
We know that we need to configure table T7XSSREUSEUISN but for some reasons it is not in the directoryu2026.
Any suggestions or work around?
Any inputs are much appreciated.
By the way our ECC is 5.0 and EP is 7.0.
Thanks,
Eugen

Hi,
check the below threads that may help you.
Re: Problem: Country specific ITS ESS services displayed for other countries
Re: ESS/MSS country specific
Raghu

Why EPCM.donavigate doesnt work for Iview with isolation type embedded

I am using EPCM.donavigate in JavaScript in portal jspdynpage to navigate to different page. This works fine when my iView isolation method is URL but it doesnt work when it is embedded. Am I missing something here? some import?
Regards,
Nitesh

Hi,
In Javacript of Portal jsp page, we are calling EPCM.doNavigate method as below:
function callfunc(obj,externalLink,rid,portalPageURL,InvalidLink)
return EPCM.doNavigate('ROLES://' + obj)
Final URL look something like this...
portal_content/com.sap.pct/com.sap.prod_fld/com.sap.roles/com.sap.rol_career/com.sap.wks_1_1/Folder_2/com.sap.pag_1_1_2
This Code works only for Iviews with URL Isolation but doesnt work with Embedded Iviews as my Page which contains this Iviews is also Embedded and Desktop is also embedded.

RFC/Function base for iViews

For iViews in the EP Content Library:
Is there a single point information source that provides the BAPI/RFC/Query names and profiles underlying the individual iViews listed in the iView Content Library?

Hi,
If you are Looking for the standard Iviews that come with the Business then you should download the concerned docu from Iviewstudio.com or sap serviceplace.
If this is a general question, then you should search for say Bapi via trans BAPI in SAP and for RFCs via SE37.
SAP Does not publish any standard list i think.
Regards,
Anuj

Calculating roundtime for iviews - Portal performance monitoring

Dear Gurus,
I have a bunch of iviews that need to be monitored. I am running these BI integrated iviews and want to calculate the rountime for them. currently the way I am doing it, is I enter the variable values for each of the iviews and run them, I switch on a stop clock and then wait till the results come up in the portal. The average run time right now is around 8 mins. This is not because of the portal but because of the time lapse in the back end as well.
Are there any performance parameters I can activate, or a log I can look into to see the rountime for the iviews without having to manually track the time.
Any help is appreciated, and generous points for useful answers.

The method System.currentTimeMillis() returns the current time in milliseconds of type LONG.
Define a long attribute in the component controller context. map it to the first and last views in the iview. Then in the doInit of the first view of the iview, set it's value to System.currentTimeMillis(). Then, at the end of the last view, use the formula
Long l = System.currentTimeMillis() - wdContext.currentContextElement().get<YourLongAttribute>();
This will give the roundabout time taken by the entire iview to execute.
Divide it by 1000 and u can get the time in seconds, and then divide it by 60 and it gets converted into minutes. print it using ur message manager.
Below is the small snippet of code i used.
// Init of First View in the IView
public void wdDoInit()
 //@@begin wdDoInit()
 wdContext.currentContextElement().setTime(System.currentTimeMillis());
 //@@end
// DoExit of last View in the IView
public void wdDoExit()
//@@begin wdDoExit()
long l = System.currentTimeMillis() - wdContext.currentContextElement().getTime();
float f = (float)l/(float)1000;
wdComponentAPI.getMessageManager().reportSuccess("Time Taken by the IView "f" Seconds");
//@@end
Note: wdDoExit() was My last method to get executed. if u use something else, substitute this there.

Caching problem for iViews with URL parameters

Hi,
We have a big problem with iView caching.
Our objective is to use SAP Netweaver Portal 2004s & External Facing portal for a public Internet Portal
For performances reasons we need to activate iviews caching on the principal iviews. But the problem is that a page called with different parameters generates exactly the same html result
example --> The display of a news item:
/irj/portal/anonymous/index.htm?rid=/news_123.xml
gives the same cached result as
/irj/portal/anonymous/index.htm?rid=/news_456.xml
The caching level is "shared" because all users are anonymous !
The iview caching seems to be occuring on component (iView) level and not on URL level
Can someone help ?
At the moment we have performances of 10 seconds for a page, and with caching it's becoming less than 1 second, so we really need the caching !!!
Thanks
Laurent

Hello
I hope you get your answer since, nevertheless it could help other.
Have you tried to put the cache level to "session" instead of "user" or "shared" at the iview level?
Regards
Benoit

Adobe Flash player for iview

I wish to watch a tv program in iview. I installed adobe flash player as directed, but when I went to watch my show it still told me to install adobe. I now have three "flashplayer" icons on my desktop. I need to delete two of these and to activate one. How do I do this.....help please!!!

While I'm painfully aware of the lack of a version of Adobe Flash Player for the iPhone, more and more Flash-based web home pages are not accessible to the iPhone. I also understand that Flash Player is not compatible with Apple's 'vision' for iPhone Applications. The problem we have is this increasing exclusion of Flash-based web sites and if what I understand about Apple's policy on iPhone Apps is accurate, then we will never have access to these sites on an unmodified iPhone. I can see that one of the problems is that Adobe Flash Player competes with the YouTube Player and possibly with iTunes movies.
Unless the web pages have a link for iPhones or re-direct iPhones accessing those pages to a non-Flash version of the web page, it seems likely that we are basically, well...screwed. Anyone have a different take on this?
Do we need an Apple-Adobe intervention? Perhaps over a nice hot mocha latté in Seattle...

Looking for training on custom coding for iView in Java

Hi, I'm < 1 yr experience in Portal. I have taken a training in NetWeaver EP. I will need to work on some custom coding such as customizing some iViews in Java. I heard that there is some kind of training out there which I can learn more about creating JAR and etc. Could someone tell me if SAP is offereing such classes or any online training available?
Thanks.

Here is an index to the tutorials:
http://scn.sap.com/docs/DOC-7725
BTW., try to search first. If you type 'crystal tutorial' in the search box - top right corner. Then on the left hand side, filter for tutorials.
Also, try:
Analytics Solutions from SAP - YouTube
Oh and more info is on help.sap.com
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter
Message was edited by: Ludek Uher

Printer friendly page for iViews?

Hi Friends,
I integrated few iView and assigned them to different roles and users in our portal. Some of these iView are Web Dynpro iviews.
I have a of question.... How should i enable a option for the users to view and print out the web dynpro iview result view in a printer friendly version...
Thanks for your help
Regards
Mark

Hi Mark,
Try this <a href="https://www.sdn.sap.com/irj/sdn/thread?forumID=52&threadID=132542&messageID=1514704">thread</a>.
Regards,
Pooja.

How to set a target for iView?

Hi,
I am facing a critical situation. I have created a page with narrow:wide layout and in the left hand side panel and displaying a JSP page which is with the URL links(<a href=...>..</a>). My requirement is when i click the link in the left hand side panel the page should be displayed in the right hand side panel iView. Now I am doing this by setting the target attribute of the <a> tag, but this is not recommended as i have to change code when ever i change the target. So i am looking for an option where i can set the target option for the iView.PLease help me.
Thanks in advance.
Ashok Chava

Hi Ashok,
I think you can use EPCF in you case.
Refer the following link
http://help.sap.com/saphelp_erp2004/helpdata/en/ce/3e98408d953154e10000000a1550b0/frameset.htm
Do revert if you have any more doubts.
Regards
Rajeev.
Do award points for helpful answers in SDN

How portal finds the vale for the sap-language parameter for iView

In the portal one of the ABAP WebDynpro iView is getting displayed in German. The reason for that is the sap-language parameter is being passed as DE. All other iViews in the system are passing the sap-language parameter is as en.
In our system the Logon Language property is blank for the all the iViews. Could you tell me why one specific iView the sap-language is being passed as a DE?
How the portal finds the value for the sap-language parameter?

Hello Venkata,
Check if your Component locale is set to DE.
Component locale
This locale is defined by the following component profile properties:
--ForcedRequestLanguage
--ForcedRequestCountry
Check this for more:
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/938297a5061d69e10000000a1553f6/content.htm
Greetings,
Praveen Gudapati
p.s Points are always welcome for helpful answers

For iview

Similar Messages

Maybe you are looking for