For maintaining FI text
Hi All,
I want to give text to FI document just after posting (As we give text thru FB02 going to Extras->Texts..). I am getting the pop up for text using function module 'FI_TEXTS_DOCUMENT'. But after clicking OK, I am still unable to save the text with the document and also unable to mark 'Text Exists' check box, on display of document in FB03 or FB02.
Can you help me, how can the save the text. 'Commit Work' is not helping.
Thanks
Hi
Should I use FI_TEXTS_DOCUMENT_UPDATE only or call it after FI_TEXTS_DOCUMENT.
And what should I pass to paramater I_INTERN.?
Similar Messages
-
Marketing Attributes for Maintaining Free Text
Hi Gurus,
I need to maintain a marketing Attribute under which, user can maintain free text, is any one been through with this kind of requirement.
Kindly keep me posted your comments and/ or suggestion to achieve the above said objective.
Cheers!!!
AjayHi Menaka,
Your reply is helpful to some extent as atleast 1 attribute value needs to be filled up before the attribute set can be assigned to a BP and the user need to double click the Attribute to fill in the values in the pop up box in GUI . In this scenario we cant make this attribute set as "Assign by Default". I think a development is certainly needed to achieve exactly what the business requirement is.
But certainly your reply is a good workaround to adapt for a short period of time.
@ Anup: Kindly guide me with steps to configure in SAP system.
Cheers!!!
Ajay -
Can Pages 4.3 maintain defined text formatting for at a given list level?
I'm hoping the answer to this question is a simple 'duh' solution that I some how over looked. I'm using Pages 4.3 and I am trying to create a tiered list to organize ideas into different sublevels. I want to be able to write at a particular level, then create sub levels (return -> tab) with different formatting so the levels are easily distinguished at a glance. When I move back to the higher levels (return -> shift + tab), Pages maintaines the text formatting I used at the lower level, rather than returning to the previously used format at the higher level. For example, what I want is ....
Main 1 --- (Return -> Tab)
Sub 1 --- (Return -> Shift +Tab)
Main 2
What I get is...
Main 1 --- (Return -> Tab)
Sub 1 --- (Return -> Shift +Tab)
Main 2
This means that anytime I move up or down in the tiers of a list, I need to redefine the formatting for each new bullet. I tried creating my own list styles, but that does not appear to preserve changes made to fonts or sizes. This seems like such a simple function and time saver that I feel like I must be doing something wrong. It has been a while since I used pages, but I don't remember having these problems before. Does pages really require one to reset the formatting everytime the move between list levels?Thanks Michael!
So your suggestion is to create the pricing in ECC and then download it in CRM...
Now tat would mean that first the mapping has to be performed in ECC for the existing paroducts and product category..then create pricing for those mapped prod. cat. in ECC and then download it to CR M..plz correct me if I am wrong...
regards,
Aneesh -
How to maintained the Text language for CKF keyfigure
Dear All,
Please let me know how to maintained the text language for CKF I am using only keyfigures in CKF.
Issue is text is not showing in Spain language when user exeuted the report (longin Spain) for CKF keyfigures .
As per report design there are formuals and direct keyfigures and CKF has defined and we keep it under in Row struture in the report.
After exeuted the report (Login Spain)Text has converted in all languages along with spain except for CKF keyfigures.
Issue in text CKF's:
There is a main CKF (Cost) under this again we defined two sub CKF's those are total cost and average cost. We able to see the text in Spain language for Main CKF(cost) and also cheked in RSZELTTXT(Texts of reporting component elements) for the same.
We can able to see the text in all languages for main CKF(cost) and enteries are there in RSZELTTXT table.
We can see only the text in english for total cost and average cost and also enteris are there only in EN in RSZELTTXT table.
It would help to me if any one can answer my question.
Thanks in advance .
Regards,
MQU can fetch the texts for the items using
Read_text.
Example:
g_f_tdname = xvttp-vbeln.
g_f_obj = p_obj.
g_f_langu = 'DE'.
REFRESH g_t_lines.
CLEAR g_t_lines.
CALL FUNCTION 'READ_TEXT'
EXPORTING
id = p_var
language = g_f_langu
name = g_f_tdname
object = g_f_obj
TABLES
lines = g_t_lines
EXCEPTIONS
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
wrong_access_to_archive = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
The Required fields are,
Text-id ,language,name,object.
Let me know if you further require help.
Regards -
Maintaining / Displaying Text for Infotype record
Hi,
How do we maintain infotype text for the record. Or how to display the text maintained for infotype record (I used PA20/PA30 for IT0001 record but could not locate infotype text).
Regards,
Avinash Josalkar.Hi,
If you want to know the text of a infotype then goto the table
V_T582A.
eg:0000 actions
0001 organisation assignment.
But if you want to change the standard text of a infotype then you need to have access key to change.
But if you are asking the text table for the fields in 0001.
then goto se11
enter Pa0001--dislay
click the tab entry help/check then you can see the table names in the column check table for each field. -
How maintain the Customise setting for copy the text to sales doc to sales
Hi SAP Gurus,
How to customise the text for copy to sales documents to sales documents and output.Kindly needful for me.
Regards
Vikram.MThis is determined based on the access sequence specified for the Text ID.
You can go to IMG/logistics execution/Basic shipping functions/Text control/Define access sequences for determining texts.
You may also use t-code VOTXN.
If you are trying to check text being copied to delivery header,then click the radio button for the delivery header and click display. go to the relevant text determination procedure and
Check the access sequence assigned to the Text id not being copied.
The Text object should be VBBK to copy texts from sales order header,VBBP for sales item texts.
You can compare it with your other text ids and their access sequences and make the necessary change to the one that is not being copied.
Regards, -
Issue in maintaining Long Text in Message Class
Hi
For Note implementation 1413492, I have to maintain long text, when I click on Long Text , I get a pop-up Create Modification , with 2 options for Template Type (1) Original Text (2) Template (With Headers)
Can anyone let me know how to proceed further, whatever name I give for the Modification, I am getting Error Message saying 'Enhancement Name violates the namespace convention (Note 989653)', I have tried unchecking the Self Explanatory check box as well, but still I get the same error message.
Below is the Long text I have to maintain class FR, message number 533
7. Create new error messages in the message class FR:
Call transaction SE91, enter the message class FR, and choose "Display" and
then "Change". Enter the following new messages:
Message Message short text:
533 Error while calling RFC destination
534 Contract Accounts Receivable and Payable is not installed in the
system
535 For company code & there were & data records transferred from
FI-CA
536 Error during data transfer from FI-CA for company code &; error
text:
Set the "Self-explanat'y" indicator for messages 535 and 536.
Enter a long text for messages 533 and 534:
Long text FR 533:
CAUSE
An error occurred when testing the RFC connection to Contract Accounts
Receivable and Payable. The message text is:
&V1&&V2&&V3&
SYS_ADMIN
Check the settings of the RFC destination &V4&.Hi Ryan,
Extract from note 989653;
Note:
The name of the modification object must start with:
o 'Z'/'Y', or
o the customer namespace available in the system (TRNSPACE table).
Otherwise, message 645 will appear because the SAP namespace is not
permitted.
My suggestion would be to start the name with a Z.
Regards,
Nick -
Justification for Using Oracle Text
Hello,
Can someone give me good cause (justification) for utilizing Oracle Text over other tools out there that are not tied directly to Oracle?
Apparently it is possible to identify metadata within text and do keyfield and keyword searches this way with other tools, but I question the accuracy, speed, or value in terms of data relationships with this approach. I feel the relationships belong in the database along with the indexes but can't convince anyone of this.
Has anyone experience working with Oracle Text where relationships help to drive the search and can give me good cause to this approach?
thanksHi,
Justification depends on your use. For starters:
1) It is included in both standard and enterprise editions of the db at no added charge
2) Uses SQL to query and maintain
3) Includes a number of built-ins for maintenance and optimization
4) It has 4 different index types for various uses
5) It can index any data type
6) UltraSearch is included in both standard and enterprise editions of the db at no additional charge (this is a crawler built on Oracle Text).
As for the integration - it is optimized for Oracle. If you were to build a standalone indexing solution you would probably design it a bit different, but Oracle Text takes into account the optimizer and database structure.
It has other features (same as some of the other tools) like a knowledge base, classification, clustering, theme extraction, language-specific features, ability to index documents in and out of the database, stopwords, stemming, wildcard, progressive relaxation, and the list goes on.
I guess my question would be, what is the reason for NOT using it? That might give me a better line on the reasoning so that I can respond with something a bit more specific.
Thanks,
Ron -
Maintain -- 0soursystem text ???
Hi,
Req:
-- To show the source system values for 0soursystem for restrcting / filtering in the query
-- To show 0soursystem text
Situation:
We use one flat file source system FLT1 to load data of 3 different systems. So we use only one logical system 0logsys BW_FLT. But the transaction data contains the 3 sourcesystem ids (SR_FLT1, SR_FLT2, SR_FLT3) updated from the update routines and assigns 3 different source systems ids. When the query is run SR_FLT1,2,3 has text description as 'Source Systme No Longer Connected'. Added to that SR_FLT1, SR_FLT2, SR_FLT3 do not appear for filtering/restricting the values. We have to show the text for source systems.
Observation:
-- cannot maintain the text for infobject 0soursystem
Possible Reason:
Source system text is directly picked up from logical system descriptions from the RFC connection details.
Possible solutions:
-- create a logical systems for the SR_FLT1, SR_FLT2, SR_FLT3 and therefore the text and values would appear in the query restrictions/filtering
-- add another infobject to represent SR_FLT1, SR_FLT2, SR_FLT3 source systems. So that the text can be maintained as a regular infobject. And the values would appear in the restrictions.
Wondering if there are any other possible solutions for this scenario. Pros and cons of the above solutions.
What would be the effect for not using the 0soursystem and using the custom infobject to represent the source system.
Are there any OSS notes regarding this scenario.
Any suggestions is highly appreciated.
Thanks,
SandyaHi,
I would use a seperate InfoObject to store these values, because 0SOURSYSTEM refers to table TBDLST as text table, which contains the text for logical systems and can not be changed -
Hi all,
I designed a custom program which sends out mails.
The customer wants to maintain the body text in a table. Is it possible to maintain this text in SE61 and read it from the DB. If yes, how can I read the text ?
tiaLong Text Editor Settings
Use
You can adapt the long text editor so that it meets your specific requirements by maintaining settings for the long text editor. The default settings are defined in accordance with SAP recommendations.
Features
You can maintain the following long text editor settings:
· Save and Next
If you select this checkbox, you exit the long text editor when you save. If you use sequential processing, you access the next object in the worklist that needs to be processed.
· Line Numbering
If you select this checkbox, line numbers are displayed for the source and target texts on the left side of the split screen editor. This can be useful whenever you need to find a specific part of a text.
· Lined
If you select this checkbox, the source and target texts are displayed in the split screen editor as if they were on lined paper.
· Technical Display (Standard Long Texts Only)
If you select this checkbox, the technical history of long text objects written in SE61 is displayed to the right of the source and target texts in the split screen editor. The following information is shown:
¡ Source text:
§ Original language
§ Version
§ Status (this shows you whether the long text has been saved as a raw or active version). For more information, see Saving Long Texts as a Raw/Active Version.
§ Created by
§ Date (on which object was created)
§ Release (for which the object was created)
§ Changed by
§ Date (of last change)
§ Release (for which the object was last changed)
¡ Target text:
§ Version
§ Status (this shows you whether the long text has been saved as a raw or active version). For more information, see Saving Long Texts as a Raw/Active Version.
§ Created by
§ Date (on which object was first translated)
§ Release (for which the object was first translated)
§ Changed by
§ Date (of last change)
§ Release (for which the translation of the object was last changed)
· Number of Visible Source Text Lines
This field enables you to determine the number of source text lines you can see in the split screen editor. You can specify a value between 10 and 19. The standard is 10. You can also control this setting directly in the split screen editor by clicking the More Source Text Lines and Less Source Text Lines icons above the input area for the translation.
Activities
To define your long text editor settings, choose Utilities ® Settings and select the Long Text Editor tab page. You can then enter the settings described above. Otherwise, the standard settings are used instead.
<REMOVED BY MODERATOR>
Jagadish
Edited by: Alvaro Tejada Galindo on Apr 8, 2008 3:57 PM -
OPEN DATASET FOR INPUT IN TEXT MODE - linesize issue
Hi,
I faced a problem when opened ANSI file with CYRILLIC in ECC 6.0 Unicode system - the system cuts the line to 250 characters. Below is snip of code:
REPORT Z_TEST_01 LINE-SIZE 1023.
DATA:
file TYPE char40 VALUE 'ansi_file.txt',
line TYPE char1024, len TYPE i.
OPEN DATASET file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
WHILE sy-subrc = 0.
READ DATASET file INTO line ACTUAL LENGTH len.
WRITE: / len, line.
ENDWHILE.
CLOSE DATASET file.
In this case, variable LEN always get value 250. File-content is correctly converted from ANSI and all CYRILLIC is displayed to the screen. I changed type for LINE - initialy the type was STRING, actially.
Further, tried to open it in BINARY - like this:
DATA:
file TYPE char40 VALUE 'ansi_file.txt',
line TYPE char1024, len TYPE i.
FIELD-SYMBOLS <hex_container> TYPE x.
OPEN DATASET file FOR INPUT IN BINARY MODE.
ASSIGN line TO <hex_container> CASTING.
DO.
READ DATASET file INTO <hex_container>.
IF sy-subrc = 0.
WRITE: / line.
ELSE.
EXIT.
ENDIF.
ENDDO.
CLOSE DATASET file.
WRITE: / line.
In this case I got bigger linesize (obviously 1024), but faced conversion issues - the file contains some CYRILLIC and it is messed. Played for few hours with conversions - using additions: IN LEGACY BINARY MODE... BIG/LITTLE ENDIAN, CODE PAGE... without success. So decided to ask...
Well, I searched SDN for a similar issue, but didn't found, except this one:
Re: OPEN DATASET STRING Problem
Could someone points me what am I doing wrong? How can I read my ANSI file with line-size more than 250 chars? Actually, in my case line size may vary up to 1800 chars. Further, afrer conversion and some validation, I should save it back to the AS.
Many thans in advance.
Regards,
Ivaylo MutafchievSorry for the noise - it is not an issue anymore.
-
Multi-language support for user-specified text strings used in the forms
multi-language support for user-specified text strings used in the forms
Instead of creating multiple forms, 1 in each different language, for the same service, is there any workaround?Hoan - is your question what are the considerations when creating multiligual catalogs? If so, I can tell you that at other clients I have seen them use a single catalog for one or two languages. For the two langugages, such as Spanish/English, you can create a single catalog with both of them. Once you get to more than two languages, the catalog would get unweildy and is therefore not suggested.
-
I want to create a custom enterprise project field and would like to use instead of for example a text attribute or a look-up table a field for employees (e.g. project manager) which are coming e.g. from the Active Directory. But when creating this custom
project field I cannot see such an option. What solution do you suggest as I want to avoid that everybody uses different names and spellings for e.g. the project manager and without having to fill the lookup table with all resources of the company.
Thank you so much for your help!Hi,
Are you using Proejct Server 2007, 2010, 2013?
In case you're working with 2010 version, here is an excellent
blog about how to insert a resource picker in a PDP (project detail page).
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller | -
My iPhone just stopped giving me audible notifications for email and text messages. It still rings for calls. I have checked the settings for "Sounds" and they have not changed. However, in these settings when I try to change the sound I get only the vibration and not the sample sound. Can anyone help?
Hi Midwestboy,
If your iPhone isn't being recognized by iTunes on your Windows machine, you may find the following article helpful:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Regards,
- Brenden -
Just downloaded 7.2 into my Iphone 5 what a mess. Dropped called no audible notifications for email or text messages. Went to the apple store and reset phone to original specs. Now trying to restore apps and music and itunes will not recognize the phone. I have gone thur the steps for windows 7 and still nothing??? I have downloaded the newest version I itunes too.
Hi Midwestboy,
If your iPhone isn't being recognized by iTunes on your Windows machine, you may find the following article helpful:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Regards,
- Brenden
Maybe you are looking for
-
ORA-16038: log 1 sequence# 1292 cannot be archived ORA-19809: limit exceede
I am getting this error when starting the database 10g ORA-16038: log 1 sequence# 1292 cannot be archived ORA-19809: limit exceeded for recovery files ORA-00312: online log 1 thread 1: '/usr/lib/oracle/xe/app/oracle/flash_recovery_area/XE/onlinelog/o
-
All applications can't be opened.....
dear all please help me,.... after uninstalled garage band using clean my mac,...all app can't be opened.... thanks for before....
-
Why don't dashboard widgets work in 10.7?
I've been googling around, looking for an answer to this question--I've downloaded several useful widgets only to discover OSX 10.7.5 Lion won't open them. I get the error message: "You can't install *.wdgt because it is not a valid widget." After
-
Yosemite 10.10.3 & photoshop elements 13
I just did the 10.10.3 update to Yosemite. Now I'm being asked to enter my Photoshop Elements 13 serial number. I no longer have the box. Any fixes?
-
What is the use of having private browsing enabled in iPad