For moderator: where to address a question on music software "finale?"
i have an older version of finale (2002b) and am having trouble getting the application, which runs in classic mode, recognize the usb ports. i'd like to post the question but there is no forum for this reasonably popular software. where would it be best to post this?
For non-Apple software, the place to look is on the site of the producer:
http://forum.makemusic.com/
Also
http://www.finaleforum.com/
Here you could probably best put your question in the Classic forum:
http://discussions.apple.com/forum.jspa?forumID=726
Because you program is so specialized, make sure you do a google search on "finale classic mode" or something like that.
Similar Messages
-
afari 5.1.5 for Mac OS X Server v10.6 is no longer available for downloading, where I can find it?
FWIW, Software Update Server on OS X Server 10.6 did occasionally corrupt itself.
If I had a case of that arise, I'd get a full backup, would shut off Software Update Server, apply the current OS X Server 10.6.8 combo update and the current and subsequent patches, then reset the Software Update Server caches and force a new download of everything, and then restart the Software Update Server.
Alternatively — and given what I've encountering with 10.6.8-vintage hardware failures in the last few months — I'd probably look to migrate to newer hardware and newer software. Those disks are getting old, after all.
Software Update Server and Caching Server 2 on 10.9 have both been stable.
The Reposado open-source implementation of Software Update Server might provide you with an alternative approach, if Software Update Server is being recalcitrant and if you can't upgrade. -
how can I save a page and all its component parts in a single file, like IE does as an MHT?
It's much easier for mailing to people where page address not available?? (as in output from an airline booking site, for example)
It is simply too painful to have to zip everything up into a single file to send. MHT format has been available for years now from IE, and with every new FF release it's the first thing I look for. I have been using FF for years, and hate having to come out of it, over into IE |(which I even took out of startup) and key everything in again, in order to send somebody something in a convenient format that they can open with a single click.
I can't believe this hasn't been asked before, so have you looked at it and rejected it? Have MS kept the file format secret?
Thanks
MGThis is not really an answer just my comments on your question.
I am sure I recollect efforts being made to get mhtml to work with FF.
Probably the important thing to remember about .mhtml is that if other browsers do support it they may need addons, and may not necessarily render the content correctly/consistently.
There are FF addons designed for archiving webpages, you could try them, but that then assumes the recipient has the same software.
You could simply save the page from FF to your XP pc; then offline open it with and save it using IE, before then emailing using FF, and attaching the .mht or mhtml file that you have now created on your PC.
As an alternative method, in some cases it could be worth considering taking a screen grab of the required page, then sending that to the recipient as a single email attatchment using either a bitmap or jpeg file format for instance.
Something such as an airline booking may be designed with a print option, possibly it could be worthwile looking at sending the print file itself as an email attachment. -
Thanks all for the great advice. Another question. If I use Entourage on my Mac desktop to access my mail using an email address I have on there, is it possible to access my emails on that same email address on my iPad, either with or without using Entourage. Is there an Entourage app, or something I could use? Thanks...
Simply add the email account to Mail, no need for Entourage.
One word of warning, though, iPads tend to become community property (meaning anyone who uses your iPad can access your email). That is why I have zero email accounts on my iPad.
I use Entourage on my desktop as well, so going back and forth between Entourage and Mail (whether on your iPad or iPhone) is no problem. -
Revision: 11933
Revision: 11933
Author: [email protected]
Date: 2009-11-18 06:55:18 -0800 (Wed, 18 Nov 2009)
Log Message:
Addressing an edge case for TileList where at times the listItems array doesn't accurately reflect a fully realized set of item renderers. This can occur when the TileList row/col creation routine bails out early when it believes it has no further need to create renderers due to current height of the list itself.
QE notes: None
Doc notes: None
Bugs: SDK-24169
Reviewer: Alex
Tests run: List, TileList, HorizontalList, DataGrid
Is noteworthy for integration: No
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-24169
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/listClasses/ListBase.asDue to a copy/paste glitch, some necessary spaces have inadvertently been removed. If I could fix this, I would.
-
Apple asking me security questions that ive never set up and i can't purchase anything, and ive tried resetting them but i can't remember the password for my rescue email address, please help?
You need to either reset the rescue email address's password(check the site's help for instructions) or ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(99674) -
I have just installed IoS7 on my I Phone. Having reset the security questions I have been ask for a Rescue Email address. My primary address is not acceptable, I have tried other addresses put but the process will not forward. I cannot go back, my phone now will not function. The Rescue Email address keeps appearing. Help please.
Did you check the email account for a verification email from Apple? You may need to respond by clicking the Verify Now link before the new rescue address will be accepted.
-
I have no idea where to post my question
I just bought a brand new MacBook Pro. I have so many problems trying to get up and running with this machine, I don't know where to post my questions. My mouse doesn't work right any more, the thing doesn't recognize my printer any more, it won't launch my scanner any more... I have been at this for 4 days now. I just don't know where to begin to ask my questions here I am having so many problems getting this brand new machine to work.
I was migrating from a Powerbook G4 that worked beautifully. As soon as I got this brand new Macbook Pro and tried to use my Kensington wireless mouse, my HP Laserjet, and Epson flatbed scanner, it seems like the new machine just won't work with any of these items and I don't know where to begin to ask here.
It took 2 days to get Apple mail working properly on this new Macbook Pro and even my ISP was baffled by the problems encountered.
Could someone please tell me where I can post my question here about how to get the above stuff working with my new Mac? I am completely exhausted and ready to just return the whole thing.Actually Human,
Here are some possibilities.
Using Your MacBook Pro
Any of the the other MacBook Pro Forums
Printing (Leopard)
Mail And Address Book (Leopard)
Using Mac OS X Leopard
Or any of the other Mac OS X v 10.5 Leopard Forums
ali b -
Forward a "subfolder" suggestion to the moderator of "mail & Address"
could the moderator forward this: (a "subfolder" suggestion) to the moderator of "mail & Address"? thanks:
A suggestion for a "subfolder" since you have no subfolders already, and there are dozens and dozens of threads about this:
subfolder name would be something like this: "Having trouble with the new mail sound in the Mail.app? look here"...
then to start it out, just pick out a few of the threads and put them in there? is that possible?
(be better if it was a keyword folder, so any subject with the word "sound" would end up there... but we have to work with what we have)
(i hope this is the proper use of this forum)
thanks,
Jon.-------
If you are suggesting another category within Mail and Address Book for a single question
Hi Eric,
yes I mean (I guess) a "sub category" under the "mail and Address book" category...
I don't think a User Tip would work, because it is not a group of questions that have been solved.
and after looking at the "iPhoto 8" sub categorys, it seems like it would fit right in, it is basically a grouping of questions around a single problem. Dozens and Dozens of threads are being created about this problem, but they are scattered all around the main category, and these dozens of threads have many many replys in them, probably more replys together than any other posts within the main category, all asking the same thing.
it seems like it would be a waste to let people continue to create dozens of new threads about the same problem.. a "sub category" it seems would be in order, similar to the sub categories under "iphoto 8"...
Jon. -
E71, Mail for Exchange and IP addresses
I have been struggling to get M4E working with my new E71 for several weeks.
While it worked immediately upon first configuration on my local Wifi access point, I couldn't get it to work away from my home office.
I'm posting this for information as it may help others in the same situation.
The set-up is a very small business with a Windows SBS 2003 server on a fixed IP address to the ISP. Using the name of the local Exchange server enabled the local arrangement. Having no FQDN, I tried, in vain, to access the server using the fixed IP address. While this works for browsing and OWA, it doesn't work for M4E.
The solution for me was to obtain a free DNS alias from DynDNS.Com - but there are other similar providers.
M4E's Exchange Server should then be specified as www.xxxx.dnsalias.com; where xxxx is your choice at DynDNS and dnsalias.com is the domain chosen (there are other domain options).
In order to enable a Secure Connection on M4E, I configured the SBS firewall to issue a certificate from www.xxxx.dnsalias.com and then 'always permitted' it on the E71 when asked. This puts it into the Trusted Certificate list.
I intend next to go on to try to set up a VPN access point - something I have yet to master!Hi hascott
You might get your domain name providor to setup an A record for your ipaddress. such as remote.abc.com points to
89.4.43.13, then set your phone to use the a record.
thats how i did it. you can setup a domain name for a few euro. post any questions you have and ill try my best to help ya.
Cheers
John -
I know there are a few other questions like this but I can't seem to find how it's relating to my issue. I am getting the familar failure sending mail: the specified string is not in the form required for an e-mail address.mail will not be resent.
in the reports feature of sccm.
I just picked a sample report Compliance 4. I right clicked hit create subscription and input my email into the TO: field. When it runs i get the above error. I checked the email notifcation under configure site components and was able
to successfully send a test message from there but I dont get why it doesnt work on the subscription.
Any Ideas?The log is pretty big so im not sure where I can upload it. I think it would be too big to paste here but I have copied what I think you are looking for in the log and will paste it here. Let me know some place I can send you the full log file
or if you want a different log.
schedule!WindowsService_37!a04!12/07/2014-00:02:03:: i INFO: Handling Event TimedSubscription with data 2946db38-5a07-4fb1-ad06-d7714e25b1ba.
library!WindowsService_37!a04!12/07/2014-00:02:03:: i INFO: Schedule 534ad96b-a680-4630-a865-9f99e1087e3f executed at 12/07/2014 00:02:03.
schedule!WindowsService_37!a04!12/07/2014-00:02:03:: i INFO: Creating Time based subscription notification for subscription: 2946db38-5a07-4fb1-ad06-d7714e25b1ba
library!WindowsService_37!a04!12/07/2014-00:02:03:: i INFO: Schedule 534ad96b-a680-4630-a865-9f99e1087e3f execution completed at 12/07/2014 00:02:03.
library!WindowsService_37!a04!12/07/2014-00:02:06:: i INFO: Initializing EnableExecutionLogging to 'True' as specified in Server system properties.
notification!WindowsService_37!a04!12/07/2014-00:02:06:: i INFO: Handling subscription 2946db38-5a07-4fb1-ad06-d7714e25b1ba to report Compliance 4 - Updates by vendor month year, owner: LEGISLATURE\mrykhoe, delivery extension: Report Server Email.
emailextension!WindowsService_37!a04!12/07/2014-00:02:06:: e ERROR: Error sending email. Exception: System.FormatException: The specified string is not in the form required for an e-mail address.
at System.Net.Mime.MailBnfHelper.ReadMailAddress(String data, Int32& offset, String& displayName)
at System.Net.Mail.MailAddress.ParseValue(String address)
at System.Net.Mail.MailAddress..ctor(String address, String displayName, Encoding displayNameEncoding)
at Microsoft.ReportingServices.EmailDeliveryProvider.EmailProvider.CreateMessage(Notification notification)
at Microsoft.ReportingServices.EmailDeliveryProvider.EmailProvider.Deliver(Notification notification)
notification!WindowsService_37!a04!12/07/2014-00:02:06:: i INFO: Notification f06f40a4-32f3-4fa6-8077-89083cc7a2a2 completed. Success: True, Status: Failure sending mail: The specified string is not in the form required for an e-mail address.Mail will
not be resent., DeliveryExtension: Report Server Email, Report: Compliance 4 - Updates by vendor month year, Attempt 0 -
Where are address book photos saved?
When I add an image to a contact I can drag-drop an image and select cropping etc., my question is: where does address book save the modified image?
Kind Regards
RobertHi,
Try posting in the iPhone forum instead here. http://discussions.apple.com/category.jspa?categoryID=201
When you post for help here in the AD forums, in the future, please start your own topic.
Select the forum category here: http://discussions.apple.com/index.jspa
Select the sub category that best meets your needs.
Click: Post New Topic.
Try ~Library/Ringtones
See if that is where they are stored.
iPhone - Ringtones - FAQ's
Carolyn -
I want to use Mac Mail for my work email address, which containts multiple outbound options (i.e. hr@, me@ etc). Is there a way to set up Mac Mail to have an account with multiple outbound addresses rather than adding in multiple accounts?
This sounds like the age old problem with keychain & Safari. I don't know of a way to solve it without using something like 1Password.
The iOS app has it's own built in browser, so it has more control over what gets autofilled. Safari on OS X has an 1Password extension that handles account selection & autofill etc.
Keychain is great in principle, but it quickly falls down when you need tight integration with many ID's & different use cases (work, home etc).
I'd suggest you submit feedback to Apple about your thoughts. I did so years ago about this issue & this is how far we have come (back to the point where me.com synced passwords) :^)
http://apple.com/feedback/macosx.html
Other tools like lastpass or keypassx may also help if you want to truly segregate password storage, but that doesn't fix autofill, the way around that issue is to dedicate one browser for work. -
How to delete the attachment for a particular to address in outlook using c#
I want to remove the attachments from outlook for a specific to address(for example if to address contain gamil.com then i want to delete the attachments) at the mail sending evevt. When we use multiple to address it give problems. I use the below code.
when i use multiple to address (like, xxx.gmail.com,yyy.yahooo.com) it remove the attachments for both mails.
pls help,
Thanks in advance....
string[] toa = mail.To.Split(';');
for (int a = 0; a <= toa.Count(); a++)
if(toa[a].Contains("gmail.com"))
//remove attachmentsHello,
You can handle the
ItemSend event of the Application class which is fired whenever an Microsoft Outlook item is sent, either by the user through an Inspector (before
the inspector is closed, but after the user clicks the Send button) or when the Send method
for an Outlook item, such as MailItem,
is used in a program.
Use the
Recipients property (a Recipients collection
that represents all the recipients for the Outlook item) of the MailItem class instead of the To property.
Use Recipients(index) or
Recipients.Item(index), where index is the name or index number, to return a single Recipient object. The name can be a string representing
the display name, the alias, or the full SMTP e-mail address of the recipient.
The Recipient class provides the
Address property which returns a string representing the e-mail address of the Recipient.
P.S. You can't remove the attachment for a specific email address. You need to send separate emails individually - with an attachment and without. In the ItemSend event handler you can check out the Recipients list and copy the source item
if you need to send the item without an attachment. Remove the "blocked" recipients from the original mail item and set them on the copied one. Then remove the attachment and send the copy. -
I have never had to enter a password to access mail.
However, recently, I keep being asked for password on my ***** address.
Only on my macbook. (which, btw, has a version number your drop down doesn't offer as a choice. I had to putt 9.4)
When I look up the account the "password" is a long string of gobbledygook. Something I would never do.
But when I attempt to use that pw I still can't get in.
I have no trouble accessing that email account on my mac mini. Just on the macbook.
<Edited by Host>Maiko,
I'm confess I'm still trying to get a handle on your problem. You do a fantastic job of describing it ... but I'm just trying to picture it accurately in my head.
I think, were I in your shoes, I'd begin by looking at what the debug page has to say for the specific destination in which you're interested in fixing. In other words, I'm not clear on where, exactly, this destination points ...
Destination illinois.edu.1945806043
Is that your site, or the division within your site that you want to fix? "Normally", you do not need to specify a site handle to get to your site within your transfer CGI ... if you say "uillinois.edu", it's enough to transfer your users to iTunes U ... but every site still has a handle, and you could, if you wanted to, actually specify it in your transfer CGI. For example, this:
Destination uic.edu.1139051993
is for my entire site ... it's my site handle. Whereas this:
Destination uic.edu.1991288441
is for a division within my site ... but it's impossible to tell the difference between "site" and "division" from just the handle (I mean, if I didn't say "this is a site" and "this is a division", there'd be no way for you to know). So when I look at your creds and permissions on your debug page, I can't quite tell if they give you download access for your site, or for the specific division you want to fix. If you could open the debug page with your division as destination (or confirm that that's what we're looking at), it'd rule out some things.
Maybe you are looking for
-
On June 2, in a post entitled Pages to ePub, I evoked the challenge of transforming a novel, written in Pages, into epub format for the iPad device. Over the last week, I've succeeded in carrying out this task completely, in an essentially manual way
-
Hey all, I am pretty new to the XML stuff - I need to write a schema for use in JAXB, then validate an XML doc against it. I wrote the doc based on a dbase table, and wrote the schema. What I can't figure out is what to do to have the doc work when t
-
Can't start GTS in 11i after refresh database ( SO URGENT )
Hi, I'm new in this forum, and i need your help I'm working with OA EBS 11i and i have a serious problem that i'll describe to you : After finishing my restauration of my database, i do an applicatif autoconfig using this command "$AD_TOP/bin/adconfi
-
Problem synching aperture photos with iPad/iPhone ios8
Updated to Yosemite. Attempting to sync select photos (Aperture) with iPad Air (ios8) or iPhone 6 (iOS 8.1) with iTunes. When I click Photos in the left-hand column of iTuns I get is an endless loading loop icon in the middle of the screen. No option
-
Get Http Request in Session Listener?
Is it possible get Http Request in Session Listener when session is created? I need to get cookies when session is created. anyone knows?