For Movie sound tracks, how to Make sound? Auto Normalize is dangerous

I'm not sure how to do this.
But i'm making an animation movie. i lay sounds(Mp3's etc i downloaded from websiteis) in about 3 different Normal audio tracks.
I add sounds ettects(GB rain, etc) too and also later on i will add a music track.
The problem is that, all these sounds came from different sources. some of them are loud.. some of them are quiet.
How do i prepare my sound project so that when i export somehow all that will be fixed. The last time i made a movie..and watched in in a normal TV.. some sounds were quiet i had to up the volume.. then other sounds would suddenly play and they were too loud.
At that time, i didn't use any compression or anything like that. I just adjusted the volume track sound level lines for the entire single track but also within the track i added KEYS so that i could lower the volume of loud sounds.
The whole thiing sounded good when i heard it in GBand.. but in the TV it just didn't sound good. I had loud sounds and soft sounds.. i had to, as i said, keep adjusting the TV volume.
What effect do i have to add so that 1) there won't be any dangerous changes in sounds( Some too loud, some too quiet) and 2)So that my whole track is in the same level when i play it on a TV.
I heard that using compressionin helps.. I tried a test, go to track edit and select Comporession->Limiter smooth.
That sounded like something that would work. and it did sound nice. But i'm not sure if when i play it on tv.. it iwll sound too low or too loud compared to other TV shows.
In sum, how do i make it so that when i create my movie using a Gband soundtrack composition...and hear it on at TV, that the sound level will be around the same as a regular TV show.. and not have super loudness or something

Before you experiment with compression, just put clips with different volumes on separate tracks in GB and adjust the volume using the volume slider!

Similar Messages

Hello! The scrollbars in Windows iTunes are too narrow for touch screen. How to make it wider?

Hello! The scrollbars in Windows iTunes are too narrow for touch screen. How to make it wider?
Jan

Dear Experts,
I Developed Screen-exit For IW51 t.codeTypically the custom fields are displayed in the notification on a separate tab, or at the bottom of the u201CGeneralu201D or u201CMainu201D tab. These are configuration decisions that could be made in the build phase.
Sets of custom fields need to be added based on the notification type. The following table provides a list and details of the custom fields required. The table to be extended is the VIQMEL table (to be verified by developer).
Also to extend header fields on the notification you need to include them in the include CI_QMEL where OPEX M&I has already fields in.
All fields should go on the notification header. There are no custom fields on the task or activity level.
All fields should be reviewed for consistency with the M&I design, specifically, Thomas Brothers, Atlas Sheet, district code. See Dale Alano.
Please any Body Helped Coding For this, Already i Created Customfields , I design Subscreen also using Enhancement QQMA0001. Using Exit name EXIT_SAPMIWO0_008 USIN SUBSCREEN 0104 PLEASE ANY BODY help me Coding for this IW52
Regards,
Santosh Ballyapelli

How to make sound play in loop

Hi
How can i make sound play in loop? Is there any property in class SoundChannel responsible for this or i have to write my own function?

Using the sound Object there is a property you can pass in which asks for number of Loops
Play(startPosition:Number,LOOPS:int,SoundTransform)
or you can create your own method that listens to SoundComplete and then trigger play again. which in my opinion is the best to do because when you play a sound with a loop, and choose to have is begin at a position other than 0 then the loop will play starting from where you set the position.

How to make sound work on presarion v5204nr?

I reinstalled Windows XP H Presario on my Presario V5204NR and have no sound. I downloaded the sound drivers and installed as directed. Received message "Driver installation could not find the media device for this driver.
How can I make the sound Work.
Thanks
Klumpr

Aspell requires dictionaries; Installing just Aspell itself won't do the trick. To see available dictionaries, just use pacman -Ss aspell.

Skype for Android Phone Video: How to Make Free Vo...

Our how-to videos will teach you everything you need to know to get started with Skype. Now, learn how to make free voice and video calls on Skype for Android.
Was this video helpful? Could you get your contact added?

pls i want to know how to make call with Skype. If am calling some one the person will not pick the call it look as if the person is not seeing the call. pls ur help.thnx

How to make Logic auto-select channel when external instrument is selected?

I recently upgraded hardware and now have to upgrade the OS 9 software (MOTU FreeStyle) I've been using and join the 21st century. I asked a Guitar Center employee about what package to buy and stressed that I wanted the software to auto-select the midi channel since that was a major benefit (for me) in using FreeStyle. I was informed that all of the newer DAW software did this (which made sense to me, after all FreeStyle was already at least 10 years old, although no longer under development (hence OS 9.) Logic Express was specifically recommended.
Sadly, I don't see this capability in Logic Express. I don't understand why, if I have 15 instruments set up, and I select a new one, I have to manually look at each of the other instruments (assuming I don't have their channels memorized) and see what channels have been used so that I don't accidentally reuse the same one for the new instrument. Doesn't the computer already know what channels are unused??
In FreeStyle could have 25 instruments set up for a 16 channel keyboard, and as long as there was never more than 16 voices playing at any particular time, the software just managed the channels for me. I don't know what happens if you go over 16 for a 16 channel instrument, I don't think I ever did (I never had voices cut out anyway.)
Not to berate Logic Express, there's lots of cool stuff in it that I'm looking forward to exploring, and it sounds like you have to jump through hoops even to get MOTU's Digital Performer to emulate the same behavior and I suspect it's as much of a hassle to set it up as to just do it on the fly (from previous experience of "what a salesman says" vs. "what is real.") I'm just trying to figure out how to make the computer do the computer work so that I can do the music work.
I have lots of partial (and even some complete!) projects to port over and not nearly as much spare time as I'd like to spend playing. I'd rather spend my meager spare time composing, not fighting with the technology.
Any ideas?
Thanks,
-David

Hi bunker,
I can't test it at the moment but I think that can be achieved by slightly changing the code like so:
*<script type="text/javascript" src="http://code.jquery.com/jquery-1.4.2.min.js"></script>*
*<script type="text/javascript">*
*$(document).ready(function(){*
*$("td.GFPFilter span input").focus(function(event){*
this.select();
this.value = '';
*</script>*
Also, if you found my posts helpful or correct could you apply those labels to the relevant posts?
Cheers,
J
Edited by: J Kremer on 20-Apr-2011 19:23
Edited by: J Kremer on 20-Apr-2011 19:30

How to make an auto play, auto loop DVD

I can't find any option or help file on how to make a DVD's contents loop. I don't need any menus just the movie to play and loop. Can anyone help me out here? Cheers

You are most welcome, but Jeff did the "heavy lifting," like Ann Bens did in the PrPro forum.
The important thing is that you get what you need.
I'd ditch the Memorex discs, and settle on Verbatim, or Taiyo Yudens. I once used Memorex tape (probably back in your dad's, or grand-dad's day), and it was good. However, for blank DVD media, they adopted a poor business plan - buy the very cheapest source media, and emboss it with their logo. In a spindle of 100, you might find 3 - 4 different mfgr's media. TDK was once good, but went with the Memorex business plan.
There are several media info utilities, and even the free ImgBurn can tell you, but it is always interesting to put in a Memorex disc, and see who actually made it, plus the lot number. Some discs might be good, but then some others can be horrible.
Good luck,
Hunt

If you have a quicktime movie with an AC3 sound track, how do you save out the AC3 file with only an AC3 extension?

Im using Quicktime 7.6.6
OS X 10.6.8
I'm trying to remove the quicktime container so I can import the AC3 into Adobe Encore, which will not import a 5.1 asset if it is within a quicktime container appearently.

Im using Quicktime 7.6.6
OS X 10.6.8
I'm trying to remove the quicktime container so I can import the AC3 into Adobe Encore, which will not import a 5.1 asset if it is within a quicktime container appearently.
It would normally help to know more about the source QT file' compression format(s). If the file is "muxed" MPEG-2/AC3 data in an MOV file container, then you can use MPEG Streamclip to "demux" the AC3 content directly to an "AC3" file container using the "Demux/Demux to AC3..." File menu option. If the AC3 track is an elementary stream within the MOV file container and if QT 7 has been upgraded for "Pro" use, then you could try extracting the AC3 track to a new player, ensure the AC3 track is selected/active in the new player, saving the new player as a new MOV file using the "Save As..." File menu option, manually change the extension from ".mov" to ".ac3" and try importing the re-named asset to Encore. (This probably only works if the importing app only checks the extension and not the container itself.) In a similar manner, if QT 7 is not upgraded for "Pro" use, you can use Subler to extract the AC3 track and save it as an M4V file whose extension can then be changed to ".ac3" in the finder.

How to make sound better quality?

So I exported a preview of my animation but the sound isn't high quality. How can I make it better quality? It doesn't sound like when I press Enter in Flash CS5.

Go to the publish preferences and see what bit rate is set for the compression of the audio. Be sure to check both stream and event.

How to make sound stereo?

Why does sound only come out of one speaker, even though my video's audio is balanced? I'm in Preimere Elements 7 using .MTS and .MOV files.

Isacksen
Check out the description of the Premiere Elements Audio Effects in the following Adobe Document
http://help.adobe.com/en_US/premiereelements/using/WS4B8135DA-083C-42eb-B09E-65070ECBC889. html#WSF8CBE888-6702-4f8b-A85E-71B4B1531883
The Fill Left or Fill Left is dragged into your audio clip as an Audio Effect...According to an excerpt from the Adobe document
Fill Left, Fill Right
The Fill Left effect duplicates the left channel information of the audio clip and places it in the right channel, discarding the original clip’s right channel information. The Fill Right effect duplicates the right channel information and places it in the left channel, discarding the existing left channel information. For example, you might use this effect on footage shot with a monaural microphone plugged into only one channel of a camcorder, extending the voice of a speaker from one channel to both.
There should also be a "Swap Channels" audio effect.
The document is updated to more recent versions of the program, but many of the audio effects of earlier versions still exist in later versions.
Could you remind me, does the sound from one speaker only exist only when both 2 channel and 5.1 channel are on the same Timeline? Or, does the situation exist with just 2 channel or just 5.1 channel is on that Timeline and you are listening to it via playback of the Timeline in the Edit Mode Monitor?
ATR

How to make sounds when Opening/ Closing windows, folders.

I liked this back when I was on OS 9 using R2D2 sounds, is there any freeware apps for this?
Didn't see one on Version Tracker, Thks.

Hi, MacUser88.
AFAIK, your only choice is the shareware application Xounds. However, I'm not a fan of such hacks or "haxies" — I never use them and would advise you think seriously before using them. Quite, boring, and stable is often preferable to noisy, cool, and unstable.
The only freeware offering in that arena was MooSB, but it does not appeared to have evolved since Mac OS X 10.2 Jaguar.
You may also want to search MacUpdate for interface sounds or appearance sounds, the latter being what they were called back in Mac OS 9, if memory serves.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

I need to remove my photos from my ipad to make room for movies not sure how to go about doing this.

Hi, I need to make room for some movies on my ipad, but i have to many photos how to i take the photos from my ipad but leave them on my iphone and desktop computer? Thank you

If the photos were synced from your computer then with your iPad connected to and selected on the left-hand side of your computer's iTunes, then on the right-hand side on the Photos tab select an empty folder and sync just that to the iPad and the currently synced photos should be removed from the iPad - that won't affect your iPhone unless you also do the same de-selection when it's connected.
If the photos were taken with the iPad, copied to it via the camera connection kit, or saved from emails/websites etc then you can copy them off the iPad first (http://support.apple.com/kb/HT4083) and you can then delete them directly on the iPad in the Photos app via the icon of the box with the arrow coming out of it

How to make Sound Recording ?

I would like to record tel conversations, is this possible with an app ?
The app should work for both iPhone and Android Smart Phone

no one has answered me yet, it must mean they did not understand my question.
anyhow, i have been playing with effects and have found that i could you Mastering - Vocal Touch UP and Convolution Reverb - Dreamscape to get my vocal song to sound a bit nicer.
If you do have some other suggestions, please do share.
thanks

How to make sound optional in flash?

I need to edit this flash design. I have not done flash in a
very long time and have no clue what to do so I need a simple and
step by step explanation. Currently, the flash design starts off
with sound and there is an option on the bottom right corner that
let's you turn it off. I need it to be the other way around. I need
the flash design to start with the sound off and then have the
option on the bottom right to turn it on.
How can I do this? Please explain. Thanks!

either use mp4 files or use an older ame.

Tutorial for Macromedia MX 2004 how to make a UI for a game or movie?

My email is [email address deleted by host] I'm looking for some tutorials or links to help me start a UI in Director/Mx2004 for a project I know the Halo 2 UI was done in Director was wondering if anyone knew some tutorials or could help me out thank you.

If you want help with Director then please repost in the Director forum.

For Movie sound tracks, how to Make sound? Auto Normalize is dangerous

Similar Messages

Maybe you are looking for