For object RF_BELEG OK03, number range interval 33 does not exist

Hi. After new year I opened financial and material periods (01/2008). When I want to make some movement in MB1B - the communicate occurs:
For object RF_BELEG OK03, number range interval 33 does not exist
Could You give me some tip what should I do now?

go to j1i9  or  snro
enter uour object name
assign here
no range 33

Similar Messages

  • For object RF_BELEG 2020, number range interval 50 does not exist FBN1

    Hi Guru's
    While posting GR i am getting this error
    For object RF_BELEG 2020, number range interval 50 does not exist FBN1
    kindly guide me to slove this error. Thanks in advance
    Regards
    Anandh

    Hi Piyush Mishra
      I have entered the number range intervals in FBN1. Still the error is existing.
      Number range interval 50 means ?? Any specific range of 50 we should give ???
    regards
    anandh

  • For object RF_BELEG LT, number range interval 50 does not exist FBN1

    dear all
    system showing this message (For object RF_BELEG LT, number range interval 50 does not exist FBN1)

    Hey Manish,
    You can use these t-codes.It can be solved with all together number ranges.
    1- OBH2
    In this activity, you can determine which intervals of document number ranges are to be copied from one fiscal year into another per company code.
    2- OBH1
    In this activity, you can copy intervals of document number ranges from one company code to other company codes. To do this, you have to store the following information:
    Wish you all the best.
    Onur

  • Error: For object RF_BELEG 9000, number range interval 92 does not exist FB

    Hi,
    When I am executing AFAB in test run mode for a particular company code I am getting below mentioned error:
    +For object RF_BELEG 9000, number range interval 92 does not exist FBN1+
        +Message no. NR751+
    +Diagnosis+
        +The database table NRIV has the delivery class 'C', i.e. the SAP default+
        +settings are only in client 000.+
    +Procedure+
        +Create the missing number range interval in customizing.+
        +Transaction code: FBN1+
    When I maintain number range 92 this error goes away. My question is we have no where assigned this number range 92 to any of the Document type then why system is asking to maintain the same?
    Sanjay

    Hi,
    You might be using the number range (say 92 which you've created in GL view & not in ENTRY view).
    Steps:
    Go to Define Document Number Ranges for Entry View OR use T-code FBN1.   Maintain & Assign two Number Ranges say 91 & 92 one for Document Type AF and another for AE for both the non-leading Ledgers say Y1 & Y2 ( Define Document Type for Entry VIew in a ledger). Also assign a number range to
    Document type SX (Closing Posting) apart from the above two Number Ranges (91 & 92)
    Hopefully it works for You............
    Dipti

  • For object rf_beleg 3000 number range inerval 50 does not exist FBN1

    for object rf_beleg 3000 number range inerval 50 does not exist FBN1
    in ob52 i see the following for my cc 3000
            from period1   year    to period   year     from period 2   year  to period year
    3000+        1         2003       12        2007         13                2007   16  2007
    3000A        1        2003        12       2007
    3000D        1        2003         12      2007
    3000K        1        2003         12      2007
    3000S         1       2003         12      2007
    when i try to post a goods movement for a po i get the following error
    for object rf_beleg 3000 number range inerval 50 does not exist FBN1
    is something wrong in this table???????
    any help would be great
    thank you in advance

    Hi
    This is not connected with Posting periods but with  document number ranges.
    Create document Number range interval 50 for year 2007 using T.code FBN1.
    This should solve ur problem
    Regards
    Aravind
    Assign points if useful

  • RF_BELEG GMR, number range interval 51 does not exist FBN1 Message no. NR75

    HI ALL
    IAM GETTING  THIS MESSAGE WHILE POSTING MIGO
    For object RF_BELEG GMR, number range interval 51 does not exist FBN1
    Message no. NR751
    Diagnosis
    The database table NRIV has the delivery class 'C', i.e. the SAP default settings are only in client 000.
    Procedure
    Create the missing number range interval in customizing.
    Transaction code: FBN1
    Regards,
    parameshwar

    Hi,
    check following link
    [problems in goods receive t.code MIGO;
    Regards
    Kailas Ugale

  • Object RV_BELEG  number range interval 01 does not exist

    Hi Gurus,
    I need suggestion or solution to solve my problem when creating sales order(standard order) from VA01 transaction.
    Error Descriptio and Message:
    For object RV_BELEG , number range interval 01 does not exist
    Message no. NR751
    Diagnosis
    The database table NRIV has the delivery class 'C', i.e. the SAP default settings are only in client 000.
    Procedure
    Create the missing number range interval in customizing.
    Transaction code:
    Reporducing the error:
    Screen flow: VA01 Intial Screen Input
                          Order Type: SD  'Subs.Dlv.Free of Ch'.
                          Sales Org : 
                          Enter.
                          Next Screen: Click on "Complete Dlv" push butoon.
                          It will take to next screen go with "SAVE" option.
                          Iam getting an incomplete Delivery want to edit.
                          Go with "EDIT" and give Input in "ORDER REASON" drill down option.
                          select any one option and go with arrow symbol in the menu "EDIT NEXT DATA" or F5.
                          Provide Input In "Customer Group" drill down option select any one option from it.
                          Again go with arrow symbol in the menu "EDIT NEXT DATA" or F5.
                          Here iam getting an status "Document is complete".
                          Click on "SAVE" option.
    Here status message error showing: "For object RV_BELEG , number range interval 01 does not exist".
    This is the issue occuring with me while creating Sale Order from VA01.
    help me if any one have know solution or suggestion to solve error.
    Tnks & Rgds
    Bhaskar

    This because of the missing SD Document Number Range.
    You can check this in tcode SNRO for object RV_BELEG.
    Ask your SD Consultant to Change the number range assignment  or create that missing 01 number range number object.
    This will solve your problem,
    Regards
    Karthik D

  • Error :number range interval 01 does not exist

    Hi,
      i created a number range object Z_REPORTID in SNRO for autogenerated ids and later used the function module NUMBER_GET_NEXT. After execution i got the following error.
    For object Z_REPORTID, number range interval 01 does not exist
    Message no. NR751
    Diagnosis
    The database table NRIV has the delivery class 'C', i.e. the SAP default settings are only in client 000.
    Procedure
    Create the missing number range interval in customizing
    Please help me to trace this out.
    Thanks,
    Anila

    Hi
    AFter creating the number range interval in SNRO you must TRANSPORT the interval. In the first screen --> Interval --> Transport.
    Did you perform that step?
    If you did that it should work well. Itried the same now and it is working fine.

  • An error in cash jounal:For object CAJO_DOC2 AAA, number range interval 01

    hi
    whan i am doing an entry in cash journal(in cas receipts) and post when a massege coms here "For object CAJO_DOC2 AAA, number range interval 01 does not exist"
    can anybody help me and solve it.
    thanks

    HI,
    First Method
    Go to TCODE "SNRO"
    Give the Object as "CAJO_DOC2"
    Click on the "Number Ranges"
    Give the Company code
    Click on the Change Intervals.
    Mainatain number range 01 and save.
    Second method
    use path Spro>FA(NEw)>Bank accounting>Business transactions>Cash Journal-->Define Number Range Intervals for Cash Journal Documents
    Or Tcode FBCJC1 to maintain number range intervals.
    An assumption to the above solution is that you have assigned the FI document type with which these documents should get posted with in the following path an dthe number range for that document type is alreday defined.
    Spro>FA(NEw)>Bank accounting>Business transactions>Cash Journal-->Set Up Cash Journal
    With adopting one of the above solutions you will be able to post the transactions.
    Reward points.
    Sarma

  • Error-For object GL_LOCAL GBU1, number range interval  does not exist

    Hello experts
    I attempted to post a JVA cash call in GJ01 and I encountered the following error. It does not state what number range interval is missing and that is my issue. I checked the number range interval for local ranges and it exists, both for years 9999 and 2015.  I have checked the number ranges for each document type to make sure that they exist. I did not receive any conflict in the number ranges assigned to various document types. I had read somewhere that this could be related to non-leading ledgers and I am no FI expert. What could be the problem and how can I resolve this issue?. I am looking for your help and guidance.
    Please see the attached screenshots.
    Thank you.

    Hi Rahul
    Thank you for your response and help. I am actually in DEV and although it says something like transporting the interval and making note of any message, the Transport option is greyed.  So, I just executed tcode GB02 and went straight to Interval --> transport.
    Even after tcode GB02, Interval --> Transport, I received the same error while trying to post a transaction.

  • Number range intervel 50 does not exit fbn1

    Hi,
    I am getting these Error while using MIGO Transaction in Quality server.plz tell me how can i Solve these problem.
    for object rf_beleg gvk,number range intervel 50 does not exit fbn1

    Dear
    Maintain the number range for invoice documents in FBn1 t.code for 50 for the fiscal year 2009
    prodecure add in new intervels,
    Ex:
    No year   from number             to number
    50  2009  1000001                   1999999
    Regards
    venu gopal

  • 562 number range for trans/event type we in year 2012 does not exist....SES

    Dear Sap experts,
    Please advise me that at the time of release service entry sheet then error come like 562 number range for trans/event type we in year 2012 does not exist....
    Please advise me that what is the transaction codes.
    Thanks
    Mohit
    Edited by: Csaba Szommer on Oct 18, 2011 2:28 PM

    Hi,
    Go through the below link.
    http://help.sap.com/saphelp_40b/helpdata/en/6d/e12c7dd435d1118b3f0060b03ca329/frameset.htm
    Regards
    Ram

  • No range for trans/event type WA in year 2011 does not exist

    Hi, All Gurus
    while posting goods in MB1C,getting error 'No range for trans/event type WA in year 2011 does not exist'
    while doing PGI,getting error 'No range for trans/event type WL does not exist'.I'm getting trained in IDES system.
    Plz help me..
    From
    MVR

    Hello,
    And welcome to SAP SDN
    System asking Number range for trans./event type WA for year 2011, as it not maintain in the system.
    Now 1st set u201CWAu201D document type for material document & then u201CWAu201D document type for accounting document
    Set for WA document type for material document
    Use TCode: OMBT
    In the Menu Click Group - maintain - again click Group-insert - Number Range Group Text (new material document)
    & then enter
    Year_From Number __ To Number.
    2011_100000000____ 199999999
    And now
    Double click "WA"
    and select check box of your "Number Range Group text of new material document
    "and click Element/Group in the Application Bar ( you can see WA is assigned to Number Range Group text ) and Save.
    Now use t.code: OMBA
    Click u201CGoods Receipt Document Typeu201D
    Next screen assign u201CWAu201D document type to t.code MB1C and save.
    Set for WA document type for accounting document
    Again Use t.code: OMBA
    Click u201CFinancial Accounting Number Rangeu201D & enter company code u2026.and click change interval.
    Now in next screen, click u201Cinsert intervalu201D
    & then enter
    Number range number__Year____From Number____To Number.
    10__________________2011____200000000____ 299999999
    And save.
    Now again use t.code: OMBA
    Click u201CFinancial Accounting Document typesu201D & next screen double click u201CWAu201D and you will have new screen and enter Number range u201C10u201D and save.
    Similarly for WL
    In  t.code: OMBA check under automatic movements doc type for TCode VL01, VL01N, VL01NO, VL02,,VL02N,,VL03N, VL07, VL08, VL09, VL32, VL32N,,VL33N, VLMOVE, etc
    Now, Set for WL document type for accounting document
    Again Use t.code: OMBA
    Click u201CFinancial Accounting Number Rangeu201D & enter company code u2026.and click change interval.
    Now in next screen, click u201Cinsert intervalu201D
    & then enter
    Number range number__Year____From Number____To Number.
    20__________________2011____200000000____ 299999999
    And save.
    Now again use t.code: OMBA
    Click u201CFinancial Accounting Document typesu201D & next screen double click u201CWLu201D and you will have new screen and enter Number range u201C10u201D and save.
    If you still face the any issue. Do revert back
    Thanks & Regards
    JP
    NOTE KINDLY SEARCH FOR THE ERROR< BEFORE POSTING QUERY ON SDN

  • Update was terminated - Class PO - Number 366 - Device ARCH does not exist

    Dear Gurus,
    We are using Automatic PO generation through ME59, we also applied one SAP note to pick the custom document type through ME59 (normally the system pick NB as standard document)
    In  MN05 - if i set as default output type 1 - print ( then the document is generating with the correct document with correct number range)
    But if i set in MN05 - default output as 2 - fax ( then i am getting this Update was terminated - Class PO - Number 366 - Device ARCH does not exist).
    Please advice
    Regards
    RS

    Dear Friend,
    Output determination for fax is not done properly. check the device connnectivity.
    SPRo>>Maintain Message type of PO
    For the particular document type - i have removed the default PO Print out settings - now its working fine. Is this the right way?
    Please advice
    RS

  • An error has occurred during report processing. (rsProcessingAborted). Query execution failed for dataset 'DimUserWorkCentre'. (rsErrorExecutingCommand). The Cube either does not exists or has not been processed

    Hi,
    I'm having issues with the report created using SSAS cube.
    An error has occurred during report processing. (rsProcessingAborted)
    Query execution failed for dataset 'DimUserWorkCentre'. (rsErrorExecutingCommand)
    The Operator_Performance cube either does not exist or has not been processed.
    I have searched through internet and tried all the solutions, but didn't worked for me.
    SSRS services running as NETEWORK SERVICE user.
    SSRS Execution running as a Different user, which is the login is used to logon ot that server. I have also verified this user has access to database. I'm using Shared DataSource(SSAS Source) for this report.
    Can any one please help me.
    Thank You,
    Praveen.
    Praveen

    Hello,
    Have you tried it to execute on report manager , Is your data source properly configured in Report Manager  and your report is mapped with Datset correctly?
    Have you executed the Dataset query MDX editor  now?
    What is the volume of data you are fetching in the report. Try it to execute in other than IE , I don't know the exact reason but some of our report with large volume of data  are failing on IE , on the other hand these reports are running fine Google
    Chrome
    blog:My Blog/
    Hope this will help you !!!
    Sanjeewan

Maybe you are looking for