For optimal sound, what is the best way to connect an iMac to a high end stereo system?

If the answer is wired rather than through an Airport Express, what is the best way to wire an iMac to a good stereo? Is there any way to do it other than through the headphones out jack?

Morning Acousticare,
Thanks for using Apple Support Communities.
Thunderbolt cables should not exceed three meters for maximum performance. The Apple Thunderbolt to Thunderbolt cable (2.0 m) is two meters in length.
For more information on this, take a look at this article:
About Thunderbolt to Thunderbolt cable (2.0 m)
http://support.apple.com/kb/HT4614
Hope this helps,
Mario

Similar Messages

HT5304 what is the best way to connect my imac wireless with airport express or directly plugged into airport unit

what is the best way to connect my imac to internet via airport express. wireless or ethernet plug to airport? thanks

Hello quinstar,
It sounds like you would like to use either your Personal HotSpot to AirPrint from your MacBook Pro or use an Airport to do so without internet access to the home. According to the following Featured Discussion you very well may be able to use AirPrint with Personal HotSpot:
HT4356 Can I use personal hotspot as wifi to connect printer?
https://discussions.apple.com/thread/4007254
Also, the Airport products to not need an active internet connection to set up a home Wi-Fi connection so that is another option as well.
Thank you for using Apple Support Communities.
Take care,
Sterling

What's the best way to connect two imac's with shared internet connection?

Hi
I plan on purchasing a new iMac (likely 2.4 GHz Intel Core Duo - 20 inch, probably will have leopard) and would like to set it up so I can share files and internet connection with my older iMac (1.25 GHz Power PC G4, 768 MB DDR SDRAM, using Tiger Version 10.4.11). I plan on using the Airport Extreme Base Station. I have a exterior cable modem for high speed internet through Shaw (internet provider) and my ethernet connection is through that.
I've heard a few things about this set up, but there are mixed reviews on everything. Would it be better to connect the Airport Base Station to my older iMac and then connect to the internet wirelessly through my new iMac or vice versa? I've heard some of the older iMac's have slow Airport Cards so thinking maybe should use my new iMac for wireless. One computer will be upstairs and the other downstairs.
There must be a few people out there who've done this, so any assistance would be great. Thanks for your help.

Would it be better to connect the Airport Base Station to my older iMac and then connect to the internet wirelessly through my new iMac...
Yes
This would allow the old iMac to use a 100 Mbps Ethernet connection while the new iMac can use a 802.11n wireless connection.
The old iMac only has 802.11g (54 Mbps) wireless capability.

What is the best way to connect my old 1st generation iPhone to my stereo receiver so I can listen to pandora?

What is the best way to connect my first generation iPhone to my stereo receiver so that I can listen to Pandora through the stereo?

I am hoping someone will answer this question you have asked. I just purchased the iSimple Gateway system and even though it says on the box that it works with the iphone3G when I plug it in to the 30pin connector it says that it does not support. It does work when I plug an iPhone4G . I have to use the headphone jack only with my 3G to listen to Pandora untill I figure out the problem .

Using Microsoft Exchange to access Gmail (Google Apps for Business) contacts, what is the best way to sync the Corporate Directory?

Using Microsoft Exchange to access Gmail (Google Apps for Business) contacts, what is the best way to sync the Corporate Directory? For instance, we have 40 staff members and wish to populate each phone with the Gmail profile. Right now we have a third party Android app that does this and copies my contacts to each phone. This is problematic. Any solutions to populate a phone with email and phone contacts? Even it it requires double entry for me...thats ok.

Oh, I meant Leopard does do more than Tiger Server.
I don't know enough about Server, even less abut Syncing.
SL is to new, not enough time to iron out the kinks yet imho.
One day SL will be better than Leo, but...
I'd ask over in server...
http://discussions.apple.com/category.jspa?categoryID=96
Or perhaps Collaboration Services...
http://discussions.apple.com/forum.jspa?forumID=1352
They may even have a different opinion on SL.

What's the best way to connect latest iphone to 2010 Mini CooperS for hands free

What is the best way to connect the latest iphone to a 2010 mini Cooper S for hands free operation?

Patrick Hindman wrote:
Does anyone have any suggestions of what kind of hardware I should purchase to do this? Basically, I want a jam-up iTunes server that serves everything to each device (sorry, should have worded it this way sooner! . Maybe a MacMini server would do it? Or possibly just a Mac Mini or would Time Capsule do something like this?
i use an old G4 Mac Mini running 10.5 Leopard, and it's on 24/7
it runs in headless mode (ie no monitor) and i remotely administer it using remote desktop (or logmein if i'm out the house).
i have a 1TB WD Mybook hanging off it connected via Firewire and that stores all my itunes content.

What is the best way to connect a MacBook Pro to my HiFi system ?

Hi,
I'm new to Apple support communities having just bought my first Macbook Pro (a 17" 2.5GHz i7 model) and this is my very first community post.
Im a bit of a Hi-Fi enthusiast, so, with my new MacBook Pro I've taken the opportunity of completely reloading my iTunes library in high quality Apple Lossless format. Took a while but now I've completed the task Im pleased I've done it.
My question is, what is the best way to connect a Macbook Pro to a high quality Hi-Fi preamp - my Hi-fi system is musical Fidelity, and the pre amp (an A5 CR Pre amp) and this pre amp, which has superb audio quality, only has analogue phono inputs ?
I'm interested to understand what both the wired and wireless connection options are. I'm guessing one option must be to use the headphone output, but I have no idea if the output from the headphone socket on my new macbook (which is presumably designed to drive headphones) would be at a suitable level for a phono line level input ?
Ive also read a few comments about using digital connection - and my second question would be - what is the audio digital connection on my macbook ?
Aplogies if this question has been asked lots of times before but I've looked through some previous posts and can't find any answers in simple and straightforward language concentrating on the issue of connecting a MacBook Pro to an analogue phono pre amp input ?
Thanks in anticipation of some advice.

What is the best way to connect a MacBook Pro to my HiFi system?
Look at the back of the reciever and see what your connection options are, the front headphone jack is output usually.
The Mac's analog audio in/out ports doubles as a optical in/out ports.
The analog won't over power your amp, it's just a headphonejack, like a powered mic, just enough power to get the signal to the destination in one piece.
Since you have a analog amp, your stuck with inferior analog connections, however you mentioned you wish to listen to the best sound quality of your lossless music.
To do that your going to need a decent surround sound system with Toslink optical import jacks, a Toslink stereo jack to regular Toslink adapter, Toslink cable and enable the optical output in your System Preferences >Sound
Another method is to use a Airport Express, it also has duo analog/opical out port. Then set up the Airport Express for iTunes streaming using the Airport Utility, then in iTunes setup the lower right corner one can set the connection.
I recommned a Harmon Kardon surround sound system, with their 100 watt satelight speakers and the 200 watt subwoofer. Enable the "concert hall" and other neat effects which will turn your 2.0 (stereo) iTunes music into 4 channel speaker sound filling the room with music and sending the lower channels to the subwoofer.
It will likely bring tears to your eyes that you can actually hear the full quality of your music as intended, I almost quarranty you will never want listen to music on a crappy iPhone or iPod again.
If a surround sound system is out of your budget, you can get by using the Harmon Kardon "Go Play" portable stereo and a analog stereo cable.
If your going to use your analog amp to power reference speakers, then there are various analog adapters of all sorts to make the appropriate connections once you know what they are, check out Radio Shack online for them.

What's the best way to connect the audio out of my Mac to my stereo receiver?

I want to listen to my mp3 collection through my home theatre stero receiver.
I have 2 audio interfaces that I connect to my mac through USB and Firewire: Digi Design Mbox mini and Maudio ProFire 610.
I've tried going from a headphone 1/8'' connector from the headphone out of my mac to rca connected to the aux (or whatever) of my stereo.
I've tried using a 1/4'' adapter on the 1/8'' to go from my mbox mini's headphone output to the rca aux on my stereo.
The problem is I'm hearing distortions that sound like clipping, or static, crunchiness on certain frequencies in a lot of my mp3's that shouldn't be there.
I listen to lots of music, and a lot of it uses distortion, like shoegaze, drone etc but I know what I'm hearing is unnatural.
I even hear these flaws when I listen to headphones through the headphone out of my mbox.
Page 2 on this instruction manual says I should be able to go from the monitor outs to my stereo. The monitor outs are 1/4 inch out so I figured I would need a 1/4 inch to rca cable.
I got this one from monster thinking it should work. No dice.
So my question is, what is the best way to connect my mac to my stereo? I need to avoid these distortions and flaws in the audio i'm hearing or I will go nuts.
Why might I be getting these clipping distoritons?
any advice would be fantastic

It depends on how close the receiver is to the iMac. If it's just a few feet away you need at cable like:
http://www.amazon.com/StarTech-com-THINTOSMIN6-Toslink-Digital-Optical/dp/B00016 W6Y6/ref=sr_1_2?ie=UTF8&qid=1316096392&sr=8-2
However if the receiver is across the room or the house you would be best to enable Air Play, this enables you to wirelessly connect the receiver to the iMac. You will need the above cable and an Airport Express. If you are not familiar with Air Play navigate to:
http://www.apple.com/itunes/airplay/
I have been using it for quite some time and find it great. If you are not familiar with the Airport Express here is the link to it:
http://www.apple.com/airportexpress/
You can even find refurbished ones on Apples website for about $79.

What Is The Best Way To Connect Ipod To Stereo Reciever With High Quality?

I recently purchased an 80 gig and am a newbie. I ripped all my music at around 280kbps to retain good audio quality when playing in my car and home theatre system. There are tons of accesories out there (docks, jacks, etc) which is the highest quality to connect my Yamaha receiver. I would think a connection to the bottom of my ipod would be of a higher quality rather than using the headphone jack. Any suggestions would be great. I was thinking about using the monster itv link but mostly for audio. thanks

OK - So now that you have all completely ignored the original question - in hopes of proving your manly-hood....
Does anyone have an answer to the original question....
"What is the best way to connect to a high end home stereo to retain the best sound?"
For sure any connection going through the headphone jack will be a big step back - enough so that you would easily hear a sound quality loss in doing so.
For the few of you who would like to argue/bicker/rant on the nominal sound quality loss....keep on doing so, but for those who actually have some respectable advice we would love to hear it.
For the record, I tend to hear just outside the normal human auditory range...
To help myself put it to rest already... a few years back I decided to conduct my own little listening test.
I took 6 different common ripping modalities (from lossless - to - 128kbps in both MP3 & AAC.... then transfered all of them in order to a blank. Used the same song for each - the song chosen opened with a few clean crisp bars of high freq. music, followed by an instant explosion/drop into a tight & low bassline.
The final cutoff that was achieved before I was unable to detect an audible difference was 198 VBR AAC. Having convinced myself that there was the ever sooooooo slight difference b/t 198 & 256, I went with my current ripping status of 256.... Just incase my audible range should become finally honed with age (yeah, like that is really going to happen) !
This test was run over a Yamaha DSP receiver, running at a constant 110w per channel (w/a max of 220w). The speaker setup was a full surround set of Klipsch Reference Series..... each speaker housing 2 x 6.5 woofer (each housing 2 x 1" Titanium tweeters) And sitting along side the 5 surrounds was/is a 150w continuous 12in. Subwoofer.
Now I am hardly stating that I have hearing as good as some of you extremely technically profound music enthusiasts out there, but for the majority of people making comments about sound quality, and lack there of - when played over a $120/40w Audiovox radio.... I'm sorry, but I would have to side on that of......"Hogwash, that you can hear a difference!"
So.... if possible would someone please offer some advice on a dock or cable connection that will allow us to enjoy the music we ripped at whatever
so-called range we did!
For those interested in seeing who could hit the further bullseye with their eyes closed, You win!!! Now can you help us?
MBP Mac OS X (10.4.9)

What is the best way to connect Cambridge DAC to imac

What is the best way of connecting a Cambridge Audio DacMagic to the imac without losing sound quality?

Morning Acousticare,
Thanks for using Apple Support Communities.
Thunderbolt cables should not exceed three meters for maximum performance. The Apple Thunderbolt to Thunderbolt cable (2.0 m) is two meters in length.
For more information on this, take a look at this article:
About Thunderbolt to Thunderbolt cable (2.0 m)
http://support.apple.com/kb/HT4614
Hope this helps,
Mario

What is the best way to connect my guitar to the usb port on my IMac

This is for use with Logic Pro X
what is the best way to connect my guitar to the usb port on my
I-Mac

As has been said really, the less you pay the less quality, and flexibility you'll have on your sound.
For example, you could run on a 'Rocksmith Real Tone Cable' if you just wanted a cheap way of getting your guitar into the computer for some fun. Probably cost you $30 (I live in UK so can't be sure). If you're starting out then this could be considered the best option for dipping your toe in the water without spending too much.
You won't get a really nasty sound out of that if you can process it yourself in Logic afterwards to clean up, but it won't be great either. I imagine it could get quite noisy so you'd need to get heavily gating your guitar sound, if you're playing something clean that's not ideal.
Longterm, you're far better getting a decent audio interface, as you need something to play sound back through, if you have different input sources you usually have to create an aggregrate device on osx to use multple sources at once esp if you're using the built in audio chip on your mac to listen.
All this can add latency and possibly sync issues (i.e. drum tracks not in time with audio etc.), although generally it's not too bad, but it's something worth knowing if you want to do things on the cheap without buying a dedicated interface.
What kind of money did you want to spend? Are you thinking super duper cheap, and then see how it goes and maybe spend more in future if you enjoy it? Personally i would say £100-150 would get your something good to start with, like that Presonus audiobox, there's a lot of options like that available.
My local music shop always push the alesis io2 on new users, gotta say i'm not that overly impressed with it. Line 6 stuff will be good however, but limiting. Although i beleive you get their software for free with it?

What is the best way to connect MBP 13" - (non retina) to HDMI TV input

What is the best way to connect MBP 13" late 2012 - (non retina) to HDMI TV input
...To get Video and Audio? With one cable ...
I'm seeing that the "rocketfish" adapter is not handling the job (from these forums).
I enjoy watching youtube videos, hulu, etc on the big screen through my laptop. The other Windows laptops I'ved had from Sony, HP, Dell, all had HDMI and was easy peasy.
I don't have the patience to buy and return 10 different types of adaters (nor would Best Buy appreciate that)
Thank you!

Look for something like this:
http://www.amazon.com/Cable-Matters-Premium-DisplayPort-Thunderbolt/dp/B004CADY9 I/ref=sr_1_6?ie=UTF8&qid=1356715728&sr=8-6&keywords=cable+displayport+to+hdmi
Ciao.

What is the best way to connect my ipad to the high-speed Internet connection in a hotel room

what is the best way to connect my ipad to the high speed inernet connection in a hotel room

every connection is a bit different. Generally, connect to the wifi, then you may need to open Safari, and may even need to try to get to one of your bookmarked pages to trigger the 'agree to our terms' page to come up.
As to it kicking you off every so often, there are sometimes glitches with the wifi on iPads, you can also be subject to any programming the hotel has. Like I've noticed various places that only allow you to log on for a period of time before having to relogin.
most hotels have 1-800 numbers, so you can always try calling that to see if their tech support has any tips for the frequent disconnection issue.

Hi I would like to show a presentation written on my macbook air on my television what is the best way to connect the two ?

Hi I would like to show a presentation written on my macbook air on my television what is the best way to connect the two ?

Much depends on the available connectivity of your television.
If it has HDMI input available, all you will need is a minidisplayport to HDMI adapter, and an HDMI cable long enough to place the Mac in the desired proximity to the TV. The adapter is avaialble from the Apple Store online.
Provided the HDMI input on the television supports sound, and the model of your MBA supports it as well, make suree that your adapter is also supportive of sound, otherwise you will need to run separate cabling from the headphone jack of the MBA to TV sound input or external speakers.
This is a somewhat specific answer to a question without any requisite detail. You don't indicate the model or type of inputs on your TV, nor do you indicate the model/generation of MBA you have.

What is the best way to connect a firewall cluster to a VPC domain

Hi All
Can anyone help me decide what is the best way to connect a firewall cluster to a VDC running in a pair of N7K's which is a VPC domain?
Can I configure a VLAN interface on each VDC and use HSRP? I was planning on presenting one 10GB cable from each VDC to each firewall. Would this work OK? HSRP traffic will go across the VPC peer link correct?
thanks all

No, but the one caveat is vpc orphan ports. If the vpc link between the nexus switches fails for any reason, all the vpc ports on the vpc secondary switch will be forced down. So it's recommended to connect single port devices to the primary vpc switch so the connections stay up. But if you're ok with that, then I don't see any problems.
You have a few options, one would be to run a separate link between your nexus switches for non-vpc vlans. These vlans would not be allowed over the vpc peer-link, or forwarded out vpc's.
See here page 49 :
http://www.cisco.com/c/dam/en/us/td/docs/switches/datacenter/sw/design/vpc_design/vpc_best_practices_design_guide.pdf

For optimal sound, what is the best way to connect an iMac to a high end stereo system?

Similar Messages

Maybe you are looking for