For People Who Don't Like To 'Push in' To 'Click' Your Trackpad...

Some people may already know this but....
did you know, you can go into trackpad settings and enable 'tap' clicking?
I just came across this and now I just have to 'tap' the trackpad to input a click, no more pushing hard.
Amazing.

I found that as well. It makes a considerable difference in the trackpad usability. The two finger tap for "right clicking" is much easier than clicking the pad. Until I found the tap option, I was concerned that I would not be able to adapt to the new trackpad.

Similar Messages

I don't have a credit card to enter in too App Store . I never had to have one befor to buy aps befor so why start it now it's so stupid for people who don't have one or don't want to put there private details on here

I don't have a credit card to enter in too App Store . I never had to have one befor to buy aps befor so why start it now it's so stupid for people who don't have one or don't want to put there private details on here

How to Get Apps From the App Store Without a Credit Card
http://ipadhelp.com/ipad-help/how-to-get-free-apps-from-the-app-store-without-a- credit-card/
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
http://support.apple.com/kb/ht2534
Why can’t I select None when I edit my payment information?
http://support.apple.com/kb/ts5366
If None is not available - On your computer launch iTunes and click “iTunes Store” in the left navigation pane. Click the “down arrow” next to your name at the top right side of the page and click “Account.” Enter your username and password and click “View Account” to log into your account information. Next to your Payment Type, click “Edit.” Select the “None” button and click “Done.” Confirm that your card has been removed by returning to the Apple account information screen. Under Payment Type, it should say that there is no credit card on file.
iTunes Store: Changing your payment information
http://support.apple.com/kb/HT1918
iTunes Store Accepted Forms of Payment
http://support.apple.com/kb/HT5552
 Cheers, Tom

Is family base for people who don't have kids? can I unscribe from family base if I find i don't need it at a later time?

Is family base just for people who have kids? Can I un subscribe to it if I don't need it later on? I only want it to block un wanted calls.
Thank you
Bettie

Horlacher, we want you to subscribe to only the wireless tools that you need. Family Base allows you to monitor your usage and set limits on usage for data, messages, calls and purchases. You also have the ability to block incoming calls and text messages, as well.
For more details regarding Family Base, click http://vz.to/1AdYFWU
LasinaH_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

This is for people who wants to mirror all they apple devices when they travel.

this is for people who wants to mirror all they apple devices when they travel and don't want to unplug everything from the apple tv and take it with them, you can get the amazon fire tv stick and download an app called airplay upnp or the reflector app and mirror all of your apple devices to it, it is great for traveling easy to setup and move around, for example if your traveling and want to use it in the conference room and then want to take with you back to the hotel for the night and plug it in and keep on doing that routine.
it will be great to use hopeful until apple comes out apple with their own apple tv stick

The Verizon DVR is admittedly not the sharpest box on the market. I admit to giving up on the multi-room DVR product, it just never worked satisfactorily for me.
Hopefully features/functions issues will improve in the near term with the Cisco/Scientific Atlanta box that obviously isn't going to make Q1. I admit I have ceased holding my breath. Something does have to happen fairly soon because 160gb drives are literally going out of production.
You do however make two statements that incorrect. Current TiVO's only need 1 cable card, since the standard cable card today in Verizon's stock is the M-Card. You also have the option with TiVO of paying either an annual fee, or a one time fee, both of which are lower in the long term than the month to month fee. Alternatively you can by the Moxi DVR, and it includes lifetime service in the purchase price.
While in theory a truck roll costs $79, in practice if it is for a Cable Card install, it is free (I think FCC regulations preclude the charge).
Apparently there is nothing in Verizon's order processing system that tells reps that there is no charge for Cable Card installations, so they often quote the $79 fee because that is the standard charge for technician to come out. As far as I can tell (and there have been lots of posts about cable card installs), no one has in fact been charged the $79 fee..

Share Reflow work with people who don't have Adobe Creative Suite?

I see a question that was posted two years ago, but I was wondering if it was possible now to share my Reflow mockup with someone who doesn't have the software. I've tried to find a way to export a pdf, But the HTML doesnt export properly. Anyone know a way to share my Reflow work with people who don't have Adobe Creative Suite

Reflow document is essentially a HTML document, so if the HTML export doesnt work properly, it doesnt sound like it is set up right?

For people who have had it die due to sweat - how did you have it?

The title is basically my question. For people who have had it die due to sweat, what orientation/where did you have it? I'm just wondering if all the claims are from having the open adapter slot face up, where sweat would easily drip into it.

@WalleWalle you are brave. Try drying it out in the sun or in some rice, and don't turn it on for a day or 2. The best thing to do would be to take it apart right away, disconnect the batter and wash the circuit with DI water, but that would be very difficult!

Providing archival folio for people who bought subscriptions

Hello,
I have a kiosk in which each issue has a fixed in-app price. Also, I would like to add to the kiosk possibility to buy an annual subscription for all the issue for next year, but that does not give me the opportunity to download all the previous folio, with a subscription. Is it possible, with the Adobe DPS Professional suite, to provide free archival issues for people who have bought an annual subscription? If not, what is the easiest way to do this with the version Enterprise, with minimum of programming.
Regards,
Tom.

There's no option to "switch subscriptions".
You would have to:
1) Cancel your subscription: https://support.skype.com/en/faq/FA1881/how-do-i-cancel-my-subscription
2) If you haven't used the subscription you can request a refund: https://support.skype.com/en/faq/FA12147/when-can-i-get-a-refund
3) Buy the correct subscription
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

There is no option to reject an incoming call in locked screen, there must be an icon on the screen for one who don't want to use lock button several times, i did'nt face this problem in last ios 6.1.3.

There is no option to reject an incoming call in locked screen, there must be an icon on the screen for one who don't want to use lock button several times, i did'nt face this problem in last ios 6.1.3.

A good read. Have you done anything at all to resolve your problem. Reset? Restore?
By the way - "your products"... nobody here produced the iPhone, we are all just users. Apple is not here.

Itunes in app purchase dont work on itunes Store for people who live in brazil?

In app purchase is not working for people who live in brazil?so many people cant do it plz fix that.

These are user-to-user forums, you are not talking to Apple here.
What happens when you try to buy in-app purchases, do you get any error messages ? If you are getting a message to contact iTunes support then you can do so via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
If something else happens ... ?

Display XML Idoc for people who do not understand XML

Hi,
does anybody know an easy way to make an Idoc XML readable for people who do not have any knowledge about XML?
This request comes from our sales department. We store incoming ORDERS.ORDERS05 Idocs from customers in XML format on a file server before mapping and sending them into an R/3 system to create the sales orders. For some reason, the sales people in our company sometimes have to have a look at the original incoming file.
Our intension is to give them an easy tool to open the Idoc XML and get it displayed in a more or less clearly arranged way, maybe as HTML table or something similar. Unfortunately I am not too familiar with XSLT.
Any ideas?
Thanks,
Philipp

Hi Philipp,
you need to do some kind of transformation. XSLT would be my first idea, but if you are not familiar with it, it might be worth a try to have a look at graphical report generators. They will take the hassle of doing manual coding from you.
Or there are XSLT mapping tools available which allow you to transform from XML to HTML, doing basically the same thing.
I do not know if I am allowed to supply some product names here, but I guess a google query for "report generator" or "xslt mapping tool" will yield some results.
Cheers!
Stefan

Free download for people who just bought a new Macbook

Is there a free download of OS Lion for people who just bought a new MacBook?

If you purchased a Mac after the June 6, 2011 you get a free Loin update. http://www.apple.com/macosx/uptodate/

In the name of hearing loss and equal access, there needs to be a balance control for people who have decreased hearing in one ear only. It is STILL not available in itunes YET, despite MUCH clamor. WE NEED BALANCE/Pan/L-R control!

OK, there's been complaining about this for YEARS, and now I have a relative who has extreme hearing loss in one ear (not deaf) and usually compensates by turning up the balance on her speakers/ipod to the left or right side in order to compensate.
Also, as a musician and a guitar teacher, I make teaching audio tracks that have a particular part on the left or the right side only, and which needs to be "muted" by panning to the opposite side, then the student can play to the backing track without that part. Of course, then they can adjust the balance back and check themselves. This is also done with a LOT of jazz teaching exercises, etc...
Apple-PLEASE give us an elegant, easy to get to way of adjusting balance WITHIN ITUNES. Most of us us professional grade equipment and sound interfaces, and care deeply about the quality of sounds we make. we do NOT want to have to keep going into Prefs in order to adjust balance, and a LOT of high end sound interfaces don't allow that anyways anymore.
PLEASE PLEASE PLEASE fix this Apple. It should be easy, it should be done in the name of compassion for those with one sided hearing loss if for no other reason, but I've outlined other reasons to do it as well.
AND I'll repeat this for the people who won't read what I wrote---WE DO NOT NEED TO BE TOLD TO "ADJUST IT UNDER PREFERENCES"---that defeats the point of having a simple solution, and it certainly won't work on an ipod.
HELP! You guys can fix this IMMEDIATELY if you will just DO IT! I cannot stress how important it is to the music community as a whole...
Why has this not been done before now? Even the cheapest, sorryest stereo receivers, players, etc., in the world have ALWAYS had a "balance" control along with a "bass" and "treble" even at their simplist. Its PAST time for iTunes to become something better. WAY PAST.
AND AGAIN---DOING IT THROUGH PREFERENCES IS NOT POSSIBLE FOR THOSE OF US USING "REAL" INTERFACES or playing on a iPod, etc...

-> Feedback and Suggestions.

With iOs 7 and the iPhone can someone use the phone while also using a communication app such as Speak It or Assistive Chat? These are text to speech systems for people who cannot speak well. Thanks you!

With ios 7 and the iPhone can someone use their phone while also using a text to speech app, such as Speak It or Assistive Chat? These apps are used by people who have difficulty with speech production.
Thank you.

My iPhone 5 wouldn't start after I turned it off a few minutes after writing this. It went into recovery mode and I had no choice but to connect to iTunes on PC and restore.
I restored to factory setting first, just to validate my phone was okay. For a second consecutive iOS update, the iPhone 5 did not update smoothly while connected to PC and iTunes - I had to retry two times before the progress bar for the update showed. (The exact same problem with the restart occured when I updated to 7.0.4.)
The good news is that I was ultimately able to restore the iPhone 5 to factory settings while running iOS 7.0.6. I did have a backup from about a month ago lying around and was able to successfully restore with that as well, so the damage done is almost negligible since I had my contacts, notes, mail, etc. backed up to iCloud.
Once I completed both restores, the sync with iTunes worked fine.

Possible upgrade solution for people who have HD and problems in general.

OK, for me, Leopard has been as painful as going osx from OS9, at least the upgrade has been , dunno about the retail copy., bugs, bugs, bugs with the upgrade for sure.
Here is what happens generally., you upgrade and basically you need to run disk tools from a external drive or the Leopard DVD., the problems move on still.
Solution i found was to back up to another drive, that is right guys, spend another hundred bucks no one warned you about., get a external HD or if your living it high and collect macs as Apple assumes you may just have a second Intel mac laying around with a Sata drive in it to start up in "Firewire Target Mode", (hold the "T" at start up)and start cloning your drive with SuperDuper (also need to purchase)..
Ok
1- once you clone your drive (usualy a hour for the base system alone).
2- erase it as one partition,
3- in the options make sure it is set as GUID partition (takes about a hour) and
4- then as well zero out all the data., takes about 2 hours there as well.
5- Now run disk utilities from the Leopard DVD or the computer or booted up drive you used to do all this., if you can not fix permission of th volume you seen to reformat the Drive again 7 pass!, could take 4 hours.
Finally you will be able re clone it, and run disk tools after a days work no one warned you about.
*This disk utilities operation may take about 1 hour but say 11, and look like this below;*
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Butterfly.mailstationery/Contents/Resources/bottom.jpg", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Butterfly.mailstationery/Contents/Resources/content.html", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Butterfly.mailstationery/Contents/Resources/Description.plist", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Butterfly.mailstationery/Contents/Resources/English.lproj/DisplayName.stri ngs", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Butterfly.mailstationery/Contents/Resources/thumbnail.png", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Butterfly.mailstationery/Contents/Resources/top.jpg", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/English.lproj/DisplayName.strings", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Flower.mailstationery/Contents/Resources/bg_letter.jpg", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Flower.mailstationery/Contents/Resources/bg_pattern.jpg", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Flower.mailstationery/Contents/Resources/bottom.jpg", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Flower.mailstationery/Contents/Resources/content.html", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Flower.mailstationery/Contents/Resources/Description.plist", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Flower.mailstationery/Contents/Resources/English.lproj/DisplayName.strings ", should be 80, group is 99.
*Good luck*
*My ADVISE:* if you experienced these problems, as above, reformatting by zeroing out the data works. as for those who want Leopard. *DO NOT UPGRADE but install a RETAIL version of LEOPARD* until apple has a update,
I read posts where people who have the retail copy (full DVD) have not experienced these problems, mine was a upgrade from Tiger since i got a mac in the last 30 days.
WARNING: it has been hard to trust Apple fanatics with these things now days, many posts are denials to things not working so i could be wrong there as well, been honest saves time is all i can advise them.
If anyone has beter advise please do post it.

And what is yaml all about, shows up in disk utilities for hundreds if not thousands of issues?
showed up as a user as well.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/proxybasicauth-i.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/ProxyAuthenticator/cdesc-ProxyAuthenticator.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/ProxyBasicAuth/cdesc-ProxyBasicAuth.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/ProxyDigestAuth/cdesc-ProxyDigestAuth.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/ProxyDigestAuth/check_uri-i.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/UserDB/cdesc-UserDB.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/UserDB/get_passwd-i.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/UserDB/make_passwd-i.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/UserDB/set_passwd-i.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPProxyServer/cdesc-HTTPProxyServer.yaml", should be 0, group is 99.
------------------------------------------------------------

How to send a Pagemaker file to people who don't have this software???

Since Pagemaker has been mentioned in regard to my last question about finding a new ink jet printer, I thought maybe someone could tell me how I can send a Pagemaker file to people to don't have a Mac and/or who don't have Pagemaker. I can't seem to convert anything to a PDF file by going to "save as". There are times that I can simply drag a Pagemaker file onto an old version of Microsoft but sometimes the type changes drastically and sometimes there is a large space between letters, especially on bold titles. Many of the files I need to send contain some simple graphics for magazine ads.
I realize you probably can't offer a lesson but maybe there is a simple answer.
Thanks a bunch, in advance.
Ann C

You need to select PDFWriter (or PDF something) in the Chooser as your default printer. I have something called PDFWriter in my Extensions folder and PDFPlugin in the Printer Descriptions folder. I'm not sure where these came from, and i'm not sure what Print2PDF is, but you're actually printing your Pagemaker file, not saving it, when you create the PDF. As for page setup, the formatting isn't always quite right with my PDFWriter either, but that's mainly when i print webpages. Haven't actually tried PDFWriter with Pagemaker.

For People Who Don't Like To 'Push in' To 'Click' Your Trackpad...

Similar Messages

Maybe you are looking for