For PO creation.

Hi i am getting this error message while creating PO. i think it is giving the error regarding the Stock transfer order but i am not creating any.......please let me know as soon as possible...
Not possible to determine shipping data for material 100-310
Message no. 06280
Diagnosis
For the stock transport order, the system attempted to determine certain shipping data (e.g. the orderer, or sold-to party, and the responsible sales organization). The system was not able to determine this shipping data. Possible reasons:
the customer number of the plant does not exist;
the material master record does not exist or has been flagged for deletion;
data on the sales organization, the distribution channel or the division is missing for the supplying plant;
it was not possible to determine a shipping point.
Procedure
If the message is a warning, you can continue your processing.
If it is an error message, you cannot do so.
If necessary, contact your system administrator. The latter can check the settings for the supplying plant in Customizing.
Set up stock transport order

Hi
I checked for the same its not a solution...Another problem is that the free Item indicator is automatically getting selected and i am not able to change it either. I think it is SPRO setting problem....

Similar Messages

Duplicate check on search term for BP creation in CRM

HI,
I want to do a duplicate check on search term for BP creation in CRM.
i found one BADI ADDRESS_SEARCH. But the method address_search is not getting called.
Is there any other BADI available? how can I handle this issue?

hello,
BP is BDT (Business Data toolset) enabled (you can check it by adding break point in FM BUS_PBO and executing BP transaction). You can add your check directly to standard view (the check will be executed each time when user pushes enter) or you could add you check to appropriate action (during saving etc.) there are number of actions which you could use it depends on your requirements. You can find a lot of info about BDT (if you are not familiar) in Wiki.
br,
dez_

Functional module for automatic creation of pur requisition & pur order

hello,
what is the functional module for automatic creation of puchase requisition and automatic creation of purchase order which we will assign in action box in service order processing management.
please let me know as early as possible
regards,
rajesh kumar raju

Hi,
Please check with following.
IDOC_INPUT_ACC_PURCHASE_REQUI
IDOC_INPUT_ACC_PURCHASE_ORDER
/ISDFPS/OR_PURCHASE_ORDER_CR
BS01_PURCHASE_DOCUMENT_CREATE
CO_MP_CREATE_PURCHASE_ORDER
Thanks & Regards
Sadhu Kishore

Table for Plant Creation Date

Hi,
Can anyone tel me the table name for Plant Creation date .?
I searched in SDN but DBLOGTAB in my case has ZERO entries .Is thr any other way ?

Hello,
So i hope you get the reason why your are not getting the table changes in DBTABLOG
You should take help of the basis team for doing this. PLease go through the SAP documentation for details:
[http://help.sap.com/saphelp_nw04/helpdata/en/7e/c81ec852c511d182c50000e829fbfe/content.htm|http://help.sap.com/saphelp_nw04/helpdata/en/7e/c81ec852c511d182c50000e829fbfe/content.htm]
[http://help.sap.com/saphelp_nw2004s/helpdata/EN/32/a479f0e083fc4386e66380e932497e/content.htm|http://help.sap.com/saphelp_nw2004s/helpdata/EN/32/a479f0e083fc4386e66380e932497e/content.htm]
BR,
Suhas

Table for Reservation creation Date

All SAP Gurus,
What is the Table for Reservation creation Date?
Regards,

Hi Vijay,
Thanks for reply.
Tables yiu have recommended do not have the reservation creation or updation date.
Please correct me if I'm wrong.
Regards,

Valid size not available for this creation when using Greeting Card feature

Using PSE9 with a Mac. When attempting to create a greeting card, after selecting the photo, the Greeting Card, I receive a pop up error message as follows:
"Valid Size Not Available For This Creation". (All other Create functions such as Photo Book, Photo Calendar, and Photo Collage appear to be working). I have been in contact with Adobe Support and have been instructed to do a number of things from creating a new preferences file to uninstalling and re-installing the PSE software, with no result. Has anyone else run into this problem, and if so have found a fix? Thanks.

I've been tearing my hair out over this one also. I've been on hold for over 10 hrs with Adobe Support waited over almost 2 weeks and still no resolution. I'm trying to create the Save the Date cards for my wedding and I can't wait for Adobe. Removing the preferences file and uninstalling/reinstalling does not fix the problem.
That said I did figure out a workaround for this. It's easy but it does require Windows. For me this was no big deal as I do own a Windows box.
Get the free trial version of PE9 for Windows and install it. If you don't have a Windows computer get to a friend that has one
Upload some of your photos to the PE9 Windows Organizer (it's identical to the mac version)
Select Create and then Greeting card. Photoshop will launch the guided edit feature for greeting cards.
Select the Layout feature and once you find out that you like save it as Photoshop project. Repeat this step for as many layouts as necessary.
Copy your Photoshop project files (and any folders) to your mac.
Open the project files as you would with any other Photoshop file.
You can now select the Create feature. You will be able add your pictures and resize them, you will be able to add/remove text, you'll be able to change the backgound/borders, add graphics...pretty much anything...EXCEPT automatically modify the layout. If you click on Layout, PE9 returns nothing. You can however go into full edit mode and if you have decent Photoshop skills you can make any changes to the layout manually.
If I had to put money on this I'd say that there is a problem with the PE9 Mac installation package. For some reason it is not deploying the layout data/files or it is not putting them in the right place. For this reason the program can't find the layouts when the user selects the greeting card guided edit.
Good luck.

Unable to set IP address for VM creation using createVmBasedOnTemplate

Hi,
I'm trying to create VM using LifeCycleService - createVmBasedOnTemplate api
The VM gets created and i m able to power on
The ethernet cards are inactive when i checked thorugh console and IP address is not set
So i'm unable to login to the VM using the IP address
Below is the code snippet for reference
// CreateLifeCycleServiceClient lifeCycleServiceClient
LifecycleService.TemplateVmConfig templateVMConfig = new VirtualMachineController.LifecycleService.TemplateVmConfig();
templateVMConfig.serverPoolName = "server pool name";
templateVMConfig.templateName = "mytemplate";
templateVMConfig.consolePassword = "password1";
templateVMConfig.guestLogin = "guestuser1";
templateVMConfig.guestLoginPassword = "password1";
templateVMConfig.vmName = "rhel5_sample";
templateVMConfig.haEnable = false;
LifecycleService.NICConfig nic = new VirtualMachineController.LifecycleService.NICConfig();
nic.name = "VIF0";
nic.bridge = "xenbr0";
nic.ipAddress = "10.10.10.227";
nic.subnetMask = "255.255.255.128";
nic.defaultGateway = "10.10.10.129";
nic.domainName = "localhost.localdomain";
nic.hostName = "rhel5_sample";
nic.macAddress = "00:16:3E:09:56:C2";
nic.dnsServer = "";
nic.frontEndName = "rhel5_sample";
nic.qosEnabled = true;
nic.rateLimit = 100;
LifecycleService.NetworkConfType oNetworkConfType = new LifecycleService.NetworkConfType();
oNetworkConfType.type = "Static";
nic.networkConfType = oNetworkConfType;
LifecycleService.NetworkType oNetworkType = new VirtualMachineController.LifecycleService.NetworkType();
oNetworkType.networkType = "ioemu";
nic.networkType = oNetworkType;
//nic.set
LifecycleService.NICConfig\[] vifs = new VirtualMachineController.LifecycleService.NICConfig[] { nic };
templateVMConfig.vif = vifs;
vm = lifeCycleServiceClient.createVmBasedOnTemplate(templateVMConfig);
Please help
Edited by: user12180212 on Nov 6, 2009 5:16 AM
Edited by: user12180212 on Nov 6, 2009 5:17 AM
Edited by: user12180212 on Nov 6, 2009 5:18 AM

Hi,
I checked out the log file but there were no exceptions
Am i missing something to set the IpAddress ?
Log - for vm creation
"2009-11-09 07:15:10" INFO=> new_async_task_ext: success. ->cp_vm ('/OVS/seed_pool/RHEL5_1C1G_149', '/OVS/running_pool/575_SampleVM3') => 875AD9EC47EC43E599CC7482ACB861E9
"2009-11-09 07:15:10" INFO=> cp_vm: '/OVS/seed_pool/RHEL5_1C1G_149' -> '/OVS/running_pool/575_SampleVM3'
"2009-11-09 07:15:11" INFO=> directcall_in_asyncenv: success. utl_get_vm_size ('/OVS/seed_pool/RHEL5_1C1G_149', '875AD9EC47EC43E599CC7482ACB861E9') => success:size=10241
"2009-11-09 07:15:11" INFO=> directcall_in_asyncenv: success. utl_get_storage_repos ('875AD9EC47EC43E599CC7482ACB861E9',) => success:repos=/OVS;free_space=301273
"2009-11-09 07:15:11" INFO=> utl_cp_vm: vm('/OVS/seed_pool/RHEL5_1C1G_149') -> vm('/OVS/running_pool/575_SampleVM3') start...
"2009-11-09 07:19:25" INFO=> xen_correct_qos_cfg: vm_cfg('/OVS/running_pool/575_SampleVM3/vm.cfg')=>success.
"2009-11-09 07:19:25" INFO=> xen_clear_vif_mac: success. vm('/OVS/running_pool/575_SampleVM3')
"2009-11-09 07:19:25" INFO=> xen_correct_qos_cfg: vm_cfg('/OVS/running_pool/575_SampleVM3/vm.cfg')=>success.
"2009-11-09 07:19:25" INFO=> xen_remove_shared_disk: success. vm('/OVS/running_pool/575_SampleVM3').
"2009-11-09 07:19:25" INFO=> regenuln_uuid: /OVS/running_pool/575_SampleVM3/vm.cfg.
"2009-11-09 07:19:25" DEBUG=> regenuln_uuid: System.img.
"2009-11-09 07:19:26" DEBUG=> regenuln_uuid: mount -o loop System.img /tmp/tmpJ8Ag17ovs_mount_point failed.
"2009-11-09 07:19:26" INFO=> xen_update_uuid: success. vm('/OVS/running_pool/575_SampleVM3/vm.cfg') uuid=65104130-1e5e-18cf-163a-460b853e0c85
"2009-11-09 07:19:26" INFO=> utl_cp_vm: vm (/OVS/running_pool/575_SampleVM3) created!
"2009-11-09 07:19:26" INFO=> directcall_in_asyncenv: success. utl_cp_vm ('/OVS/seed_pool/RHEL5_1C1G_149', '/OVS/running_pool/575_SampleVM3', '875AD9EC47EC43E599CC7482ACB861E9') => success:size=10241
"2009-11-09 07:19:26" INFO=> cp_vm: '/OVS/seed_pool/RHEL5_1C1G_149' -> '/OVS/running_pool/575_SampleVM3' => success:size=10241
"2009-11-09 07:19:26" INFO=> directcall_in_asyncenv: success. cp_vm ('/OVS/seed_pool/RHEL5_1C1G_149', '/OVS/running_pool/575_SampleVM3', '875AD9EC47EC43E599CC7482ACB861E9') => success:size=10241
"2009-11-09 07:20:12" INFO=> xen_correct_qos_cfg: vm_cfg('/OVS/running_pool/575_SampleVM3/vm.cfg')=>success.
"2009-11-09 07:20:12" INFO=> xen_set_vifs: success. vm('/OVS/running_pool/575_SampleVM3') set vif_cfg=00:16:3E:09:56:C2,xenbr0,ioemu, mode=setall, scope=cfg
"2009-11-09 07:20:12" INFO=> set_vm_vifs: vm('/OVS/running_pool/575_SampleVM3') vif_cfg=00:16:3E:09:56:C2,xenbr0,ioemu scope=cfg => rs=success
"2009-11-09 07:20:12" INFO=> xen_set_vm_vnc_password: success. vm_path('/OVS/running_pool/575_SampleVM3')
"2009-11-09 07:20:12" INFO=> set_vm_vnc_password: success. vm_path('/OVS/running_pool/575_SampleVM3') => success
"2009-11-09 07:20:12" INFO=> set_vm_policy: vm('/OVS/running_pool/575_SampleVM3') policy=[] append=False=> success.
Log when VM is powered on
"2009-11-09 07:34:21" INFO=> xen_correct_qos_cfg: vm_cfg('/OVS/running_pool/575_SampleVM3/vm.cfg')=>success.
"2009-11-09 07:34:21" INFO=> xen_correct_cfg: success. vm('/OVS/running_pool/575_SampleVM3') => cfg_file('/OVS/running_pool/575_SampleVM3/vm.cfg')
"2009-11-09 07:34:24" INFO=> xen_start_vm: success. vm('/OVS/running_pool/575_SampleVM3')
"2009-11-09 07:34:24" INFO=> start_vm: vm('/OVS/running_pool/575_SampleVM3') on srv('10.237.214.149') => success
"2009-11-09 07:34:24" INFO=> start_vm: success. vm('/OVS/running_pool/575_SampleVM3') ip=''

Document is in transfer for PO, creation not possible

Hi
We are using SRM 4.0 EC scenario. Recently we have been facing the subjected error 'Document is in transfer for PO, creation not possible' while making the confirmation in SRM. It is observed that this is happening mostly in case once we make GR and cancel and repost. Thru some other thread posted in forum, came to know taht we need to delete the entries in table "BBP_DOCUMENT_TAB" via FM ''BBP_DELETE_FROM_DOCUMENT_TAB''. I ran thei FM but found NO poitive results. Hope somebody can help me out. This error became very common in our production system
Thanks
Kiran

Hi Kiran,
Please, use the report CLEAN_REQREQ_UP to clear the entry made for the GR in BBP_DOCUMENT_TAB. The problem comes because there is an entry for the GR in the table probably from the previous creation.
Regards
Saravanan.
Please award if useful

GR Error: Document is in transfer for PO, Creation not possible

Hi Experts,
While posting a GR for PO, following error is being encountered,
'Document is in transfer for PO, Creation not possible'.
I checked the PR - PO. There are multiple GRs for the PO and all earlier GRs are posted successfully.
For posting a new GR this error is coming.
Any pointers?
Thanks in advance.
-Dhananjay

Hi Kiran,
Please, use the report CLEAN_REQREQ_UP to clear the entry made for the GR in BBP_DOCUMENT_TAB. The problem comes because there is an entry for the GR in the table probably from the previous creation.
Regards
Saravanan.
Please award if useful

To make changes in the subject of Email for PO Creation...

Hi ,
We have done configuration in NACE for simple mail to be sent when a PO is created . i want to change the subject of Email for PO Creation...
Please help me in this regards
Regards
R/Ragu
Useful answers will be rewarded

Hi,
In NACE, select your output type and double click on the option for Mail title and Texts in the navigation area on the left side of the screen. Here you can maintain the Subject for your E-mail.
Cheers!

No active writeable datasource found for user creation, check your Persiste

HI SAP Guru's
Suddenly when I am login in Portal with J2EE_ADMIN or any user , I am getting error
You are not authorized to access this application; contact your system administrator
and when I am going to create user in identity management I am getting below error
Current user has user creation permissions in the UME, but cannot create users in the back-end system (data source). The original and possibly untranslated message was: "No active writeable datasource found for user creation, check your Persistence Configuration.".
I have searched all related treads in SDN but no success
Please help.
Thanks & Regards
Vinay Patel

Dear all,
I was searching the community because I had this same error and there was no answer of how it was fixed. So I'm sending how I fixed today in a customer environment.
1. Go to portal http://<portal>/webdynpro/dispatcher/sap.com/tcsecumewdumeadmin/UmeAdminApp
- select configuration
- folder "sap system based in abap"
- do the conection test
If the test fails, log on in client 001 and change user SAPJSF:
- assign role SAP_BC_JSF_COMMUNICATION (only this one) and one profile that has permission to RFC logon
- you can change the password too
STOP/START ABAP+JAVA
Go again to the portal above and test connection again. The tests should now be OK.
2. Go to portal http://<portal>/irj
- Log on with administrator user
Now you should be able to create an user.

In a future version of ibook author would be very useful to provide for the creation of shared content online. Teachers can collaborate on the creation of a text. Very useful for teachers to collaborate in the network. sharing sharing sharing

in a future version of ibook author would be very useful to provide for the creation of shared content online.
Teachers can collaborate on the creation of a text. Very useful for teachers to collaborate in the network. sharing sharing sharing

As always, feel free to use the 'Provide iBooks Author Feedback' menu item for features you'd like added in the future, etc.
http://www.apple.com/feedback/ibooks-author.html

Request for the creation of a new Unemployment account for tax

Hi Guys,
This is a question with regard to US tax. We have received a request for the creation of a new Unemployment account for the payment of taxes. This is because the account assignment number has changed for a particular company code in Tennassee state. Please let me know where this change could be made in SAP.
Thanks,
Subbaiah

Subbaiah,
Table T5UTL is used for New Tax Company Codes. If this is a new legal entity, youu2019ll need to set up the Tax Company here. Youu2019ll also need to assign at least one Personnel Area to this new Tax Company. This must be established in order to update the next table shown below, but only if itu2019s a new legal entity. The user will know.
Table T5UTH is for establishing the account number to be used in BSI. It must be established in order to update the next table shown below.
Table T5UTI is for assigning account numbers by Tax Company Code. Youu2019ll need one for Tax Authority TN, Tax Type 10. The user will need to supply this information to you.
Table BTXRATE will need to be updated with the Tax Company Code, year, and the State Unemployment Insurance rate & taxable wage amount.
Once this is done, youu2019ll need to update BSI.
If Tennessee is a new state, youu2019ll have work to do with the tax models.
Regards,
Howard

Define Control for Automatic Creation of Pick HUs

We are using full blown HU management and in the customizing for the Control for Automatic Creation of Pick HU's you define the packaging materials to use. The help in from of this customizing says that if this is blank the system attempts to find a common packaging material for all materials in the transfer order.
My issue is that when I leave this blank the packaging material that the system proposes is not the packaging material that is contained on the source HU nor is it the packaging material that is contained in the Packing Instructions.
How does the system determine the packaging material on the destination HU? Am I required to maintain a value in this customizing?
Thanks
Nick

I found my own answer so i will give myself many points. See question to get answer.

BAdI: or User Exit for Campaign Creation IN CRM 5.0

Hi all,
we are working in CRM 5.0,
we have a Requirement like :
when we create the campaign it should check higher level project ID (marketing Plan ID)
if it is there it should permit for create campaign else it ll show error...
Any BAdI: or User Exit for Campaign Creation?
I ll geive reward points....
Rhanks & Regards,
Ganesh

IN WHICH TRANSACTION U R CREATING CAMPAIGN ??

User Exit / Badi / BTE for Asset creation A ?

Hi Experts,
I need User Exit / BADI / BTE for asset Creation.
After saving newly created Asset from As01 we need to send a mail to the person for whom the Asset is assigned.
i have tried all this.But no one is triggering after saving the As01 transaction.
Exit Name           Description
AAPM0001            Integration of asset accounting and plant maintenance
AFAR0003            External changeover method
AFAR0004            Determination of proportional values for retirement
AINT0004            Change amount posted for certain areas
AINT0005            Dummy for extended syntax check. Do not use.
AISA0001            Assign Inventory Number
AIST0001            Exchange number range in master data maintenance
AIST0002            Customer fields in asset master
AMSP0002            Determine relationship type for two company codes
TRAN0001            User exit for asset transfer
Please suggest if anybody worked on this.
regards,
Imran

Hi,
Check out the following posts pertaining to similar topic.
Change Asset Workflow
Asset Management WORKFLOW
Regards
Sreekanth

For PO creation.

Similar Messages

Maybe you are looking for