For RAL and RPM analysts

Hi all,
I'm looking for forums with reference to ORPM and ALLOCATIONs applications. From what I could see in this one, there are not much information for these application, can someone give other choices?
Thanks in advance.
Regards
Edited by: ansousa on 09-Oct-2010 10:34
Edited by: ansousa on 09-Oct-2010 10:35
Edited by: ansousa on 09-Oct-2010 10:36

Though the traffic is low here, this is an appropriate forum.
You may also like to checkout the LinkedIn Oracle Retail groups (there are about 5), the OAUG-ORUG mailing list (members only) and there is a (low traffic) Ning forum. Also since a while there is an Oracle Support community for Oracle Retail (though it is tagged 'RMS').
So my suggestion is to use indeed this forum here for RAL and RPM. May also like to checkout a wiki page with Oracle Retail links at http://wiki.oracle.com/page/Oracle+Retail+Online+Resources+and+Community+Overview.
Best regards, Erik Ykema
Edited by: ErikYkema on Oct 9, 2010 9:58 PM

Similar Messages

CProjects And RPM 5.0 with NWBC

Hi,
Why is FPM used as the framwork with NWBC for cProjects And RPM 5.0. Can any other frameworks be used for cPro and RPM 5.0 with NWBC? What is the technical feasibility of using FPM with NWBC??
Thanks And Regards,
Anu Shrinidhi

Hi,
several answers to your inquiry:
You can use SAP Portfolio and Project Management 5.0 with
- NWBC for HTML
- NWBC for Desktop
- SAP Enterprise Portal.
SAP Portfolio and Project Management 5.0 uses FPM (FloorPlan Manager), that's right, but this is not depending on NWBC (nor vice versa).
The UI guidelines valid for SAP Portfolio and Project Management 5.0 are the same as for the current release of the whole SAP Buisness Suite, FPM usage is one part of this guideline.
It is not possible to use SAP Portfolio and Project Management 5.0 without FPM (at least not without big modifications).
"SAP Portfolio and Project Management 5.0" is the successor of "cProjects 4.5" and "SAP RPM 4.5". This is the official name. There is no product or application called "cProjects 5.0" or "SAP RPM 5.0".
For features, functions, concepts, etc. of FPM; please echk the FPM SDN Forum:
[Floorplan Manager for Web Dynpro ABAP|Floorplan Manager for Web Dynpro ABAP]
Kind regards,
Florian

ASM Disk preparation for Datafiles and FRA in Oracle 10g RAC Inst

Dear Friends,
Please clarify wheteher the below method is correct to confiure ASM disks for Datafiles and FRA
Partitions provided by IT team for OCR and Voting Disk
/dev/sda1 - 150 GB (For +DATA)
/dev/sda2 - 100 GB (For +FRA)
OS : RHEL 5.6 (64 Bit)
kernel version = 2.6.18-238.el5
Steps:(Node1)
1) Install the RPM's for ASM
rpm -Uvh oracleasm-support-2.1.7-1.el5.x86_64.rpm
rpm -Uvh oracleasm-2.6.18-238.el5-2.0.5-1.el5.x86_64.rpm
rpm -Uvh oracleasmlib-2.0.4-1.el5.x86_64.rpm
2) Configure ASM
/etc/init.d/oracleasm configure
Default user to own the driver interface []: oracle
Default group to own the driver interface []: dba
Start Oracle ASM library driver on boot (y/n) [n]: y
Scan for Oracle ASM disks on boot (y/n) [y]:
Writing Oracle ASM library driver configuration: done
Initializing the Oracle ASMLib driver: [ OK ]
Scanning the system for Oracle ASMLib disks: [ OK ]
3) Cretae ASM Disk
/etc/init.d/oracleasm createdisk DISK1 /dev/sda1
/etc/init.d/oracleasm createdisk DISK2 /dev/sda2
4)/etc/init.d/oracleasm status
5)/etc/init.d/oracleasm scandisks
6)/etc/init.d/oracleasm listdisks
7) Nothing to perform on Node2
8) In dbca choose ASM and map the DISK1 for datafiles and DISK2 for FRA
Please confirm the above steps are right?if not please clarify
If DBCA ->ASM doesn't discover my disk then what should be the Discovery path i have to give?
Please refer any document / Metalink ID for the above complete process
Can i have ASM and oracle DB binary in the same home
Regards,
DB

user564706 wrote:
If DBCA ->ASM doesn't discover my disk then what should be the Discovery path i have to give?for asm disk created with oracleasm discovery path variable is ORCL:*
Please refer any document / Metalink ID for the above complete processhttp://docs.oracle.com/cd/B19306_01/install.102/b14203/storage.htm#BABIFHAB
Can i have ASM and oracle DB binary in the same homeyes. unless you want job role seperation or plan to run multiple versions of oracle homes
>
Regards,
DB

Confusion with OCFS2 File system for OCR and Voting disk RHEL 5, Oracle11g,

Dear all,
I am in the process of installing Oracle 11g 3 Node RAC database
The environment on which i have to do this implementation is as follows:
Oracle 11g.
Red Hat Linux 5 x86
Oracle Clusterware
ASM
EMC Storage
250 Gb of Storage drive.
SAN
As of now i am in the process of installing Oracle Clusterware on the 3 nodes.
I have performed these tasks for the cluster installs.
1. Configure Kernel Parameters
2. Configure User Limits
3. Modify the /etc/pam.d/login file
4. Configure Operating System Users and Groups for Oracle Clusterware
5. Configure Oracle Clusterware Owner Environment
6. Install CVUQDISK rpm package
7. Configure the Hosts file
8. Verify the Network Setup
9. Configure the SSH on all Cluster Nodes (User Equivalence)
9. Enable the SSH on all Cluster Nodes (User Equivalence)
10. Install Oracle Cluster File System (OCFS2)
11.Verify the Installation of Oracle Cluster File System (OCFS2)
12. Configure the OCFS2 (/etc/ocfs2/cluster.conf)
13. Configure the O2CB Cluster Stack for OCFS2
BUT, here after i am a little bit confused on how to proceed further. The next step is to Format the disk and mount the OCFS2, Create Software Directories... so and so forth.
I asked my system admin to provide me two partitions so that i could format them with OCFS2 file system.
He wrote back to me saying.
*"Is what you want before I do it??*
*/dev/emcpowera1 is 3GB and formatted OCFS2.*
*/dev/emcpowera2 is 3GB and formatted OCFS2.*
*Are those big enough for you? If not, I can re-size and re-format them*
*before I mount them on the servers.*
*the SAN is shared storage. /dev/emcpowera is one of three LUNs on*
*the shared storage, and it's 214GB. Right now there are only two*
*partitions on it- the ones I listed below. I can repartition the LUN any*
*way you want it.*
*Where do you want these mounted at:*
*/dev/emcpowera1*
*/dev/emcpowera2*
*I was thinking if this mounting techique would work like so:*
*emcpowera1: /u01/shared_config/OCR_config*
*emcpowera2: /u01/shared_config/voting_disk*
*Let me know how you'd like them mounted."*
Please recommend me what i should convey to him so that i can ask him to the exact same thing.
My second question is, as we are using ASM, for which i am gonna configure ASM after clusterware installation, should i install Openfiler??
Pls refer the enviroment information i provided above and make recommendations.
As of now i am using Jeffery Hunters guide to install the entire setup. You think the entire install guide goes well with my enviroment??
http://www.oracle.com/technology/pub/articles/hunter_rac11gr1_iscsi.html?rssid=rss_otn_articles
Kind regards
MK

Thanks for ur reply Mufalani,
You have managed to solve half part of my query. But still i am stuck with what kind of mount point i should ask the system admin to create for OCR and Voting disk. Should i go with the mount point he is mentioning??
Let me put forth few more questions here.
1. Is 280 MB ok for OCR and voting disks respectively??
2. Should i ask the system admin to create 4 voting disk mount points and two for ocr??
3. As mentioned by the system admin.
*/u01/shared_config/OCR_config*
*/u01/shared_config/voting_disk*
Is this ok for creating the ocr and voting disks?
4. Can i use OCFS2 file system for formating the disk instead of using them as RAW device!!?
5. As u mentioned that Openfiler is not needed for Configuring ASM... Could you provide me the links which will guide me to create partition disks, voting disks and ocr disks!! I could not locate them on the doc or else were. I did find a couple of them, but was unable to identify a suitable one for my envoirement.
Regards
MK

Another CS6 Worksation Build Proposal for review and comment

Hi All,
I've put together the following video editing system build after reading this forum for many months and would really appreciate any feedback or comments. Of particular interest are comments on the hard disk setup, location of the media cache and connection speed and disk size allocation. I'm trying to put together a fast, stable, easily managed system from a file management perspective for home video editing using CS6. Video Editing will be the primary task for this workstation but it will also be the main desktop PC in the house for other general computing purposes.
Motherboard:
ASROCK Extreme 11
CPU:
Intel 3930K
Memory:
GSkill 1600MHZ RipjawsZ PC12800 8 x 8 64gb
Graphics Card:
EVGA 4G GTX680 Classified 04G-P4-3688-KR
Power Supply:
Corsair AX1200i
Case:
Coolmaster Cosmos II Black
Optical Drive:
Pioneer BDR-207DBKS Black 12X Blu-Ray Writer
( 1 X 3gb SATA connection )
CPU Cooler / Fan:
Noctua NH-D14 Socket 2011 Special Edition CPU Cooler
Software / OS:
Windows 8 Pro 64 bit
Storage:
C Drive: OS, Programs, Pagefile
Samsung Series 840 Pro SSD 512gb
( 1 x 6gb SATA connection )
D Drive:
Media, Projects
2 x WD Velociraptor 10000 rpm HDD 1 TB ( RAID 0 ) = 2TB TOTAL
( 2 x 3gb SATA connections )
E Drive:
Previews, Exports, Media Cache
Samsung Series 840 Pro 512gb SATA 3 6GB/s SSD ( RAID 0 ) = 1024gb TOTAL
( 2 x 6gb SATA connections )
F Drive:
Backup
2 X 3TB Seagate Barracuda 7200 RPM HDD ( RAID 1 )
( 2 x 3gb SATA connection )
I chose the ASROCK Extreme 11 due to the number of SATA3 ports. I haven't found any other 2011 socket mb's with the amount of SATA ports I require. Any alternatives recommended ?
My understanding is that HDD's wont benefit from a 6gb SATA3 connection so there is no point using these ports for any HDD - is this correct ?
I have viewed Todd's 'Optimizing Hard Disk Video' where he puts the Media Cache on the C drive. Where would you recommend the Media Cache be placed ?
My intention is to backup everything from both D & E RAID 0 volumes to F drive. I note some systems and recommendations have the exports being written directly to the larger, slower backup HDD but doesn't this mean the export takes longer to write ? I am assuming I am better off writing out my export file to a fast SDD and then backing up to my F: HDD later.
Any comments on the size of my E drive for Preview, Export, Media Cache...would 2 x 256gb drives in RAID 0 be adequate, considering I'm using this drive purely as temporary storage.
I also acknowledge that the C drive at 512gb may be overkill but I'd rather not run out of space there, especially if I need to use that drive for the pagefile and media cache or anything else recommended.
I look forward to reading your comments and suggestions and really appreciate any feedback / alternatives suggested.
Kind Regards
Martin.

Hi Harm,
Thanks for the feedback - very much appreciated.
The reason I chose the 1600mhz sticks instead of 2133mhz was because of stability fears, not because of price.
Also, I don't think I have seen any 64gb memory kits running at 2133mhz ?
If you think using the 2133mhz memory is worthwhile and stable, and gives a valuable performance boost I will consider that upgrade.
The GSkill 1600mhz is 1.5 volts and I have read concerns on this forum about using that voltage.
I'd really appreciate any suggestions from anyone about what 64gb 2133 mhz memory kit to purchase that is stable and runs well with an ASrock Extreme 11 motherboard and the 3930k processor.
As per other posts on this forum regarding memory, I'd rather have more memory over faster memory, hence why I am going for 64gb straight away.
As to the C drive size, I'll consider scaling that back to 256gb
Thanks again for reviewing and taking the time to comment.
Cheers Martin.

Use DasyLab to measure torque, rotary position, and RPM

I'm new to DasyLab and am developing an application to measure torque, rotary position, and RPM. I'll be using an Interface T8 pedestal torque transducer with a built-in rotary encoder capable of measuring angular position, speed, and direction. The encoder will be outputting 5V TTL at one pulse per degree. I'm using an MCC 1608GX USB DAQ device capable of reading analog and digital signals. I'm looking for insight on reading the TTL output from the encoder and converting it to angle and speed. Any help would be appreciated.

OK,
If you want to go directly to the 1608 you need to take the counter input and use it as a frequency input. This will give you the Frequency of the encoder that you can convert to RPM but I don't think you will be able to detect the direction.
To my experience the signal is not very stable due to the software pull but good enough if precision is not a question.
Another oprion is to buy an additional small frequency to analog converter that will take a dirrential output. This units can usually be programmed for +/- Frequnecy to +/- rpm.
There are models out there that are designed fo quadrature encoders. The link below is a good example.
www.laurels.com/downloadfiles/LTA-manual-pulse-in.pdf
Tom Rizzo
InSyS Corp.
www.insyscorp.com
Your DASYLab integrator

Pharma brick and RPM Segment question

Hi,
After activating the pharma specific functionality in SAP CRM 7.0,we are able to see a new tab in BP master data consisting of different pharma fields like
RPM Segment
Nano brick
qualification, groups, function etc.
We are more interested in brick and we found that brick field appears only for BP of category person. when we select BP of category org brick field disappears
Does anyone confirm that brick field is visible only for person and not Org as per SAP standard?
Regards,
Shaik

Hi,
Its good that u pasted the complete log file. In your environment you have to run this upgrade tool only once from any of the middle tier.
And with respect to your error that u got in precheck is quite simple. All u have to do is just run this script from by connecting to portal schema using sqlplus.
Run dropupg.sql
Location-------- /raid/product/OraHome_1/upgrade/temp/portal/prechktmp/dropupg.sql
Later you re-run the upgrade tool and let me know the status.
Good luck
Tanmai

PC configuration for Premiere and AE (CC)

Hallo everybody!
I'm an Italian filmaker and I'm going to buy a new workstation but I don't know anything about hardware.
I use Premiere for editing and AE for compositin and motion graphics.
A couple of years ago a friend of mine suggested me this HW configuration:
MSI Z87-G43 z87 4*DDr3 Gen 3.0 sk1150 Vga/Hdmi ATX
Corsair 16GB Kit 2*8GB DDR-1600 CMZ16GX3M2A1600C10 XMS3-12800 serie Vengeance CAS10
Inte Core i7 4770 3.40GHz Cache 6MB Haswell LGA1150 BOX
Samsung MZ-7PD256BW SSD 256GB 840PRO SataIII 540/520MB/s 100K IOPS OE
WesternDigital HDD 1TB Enterprose RE4 64Mb 7200 rpm SataII
Zalman CNPS9900MAXBLUE Silenziosa Led Blue sk1155/1156/1366/775/AMD
Corsair Carbide 300R Middletower No-Power ATX
LG BH16NS40 Bluray Writer 10x 3D
Digitus 3.5" Card reader USB 2.0 port
Logitech keyboard K120 Business
Corsair 750 CX 750watt EPS Pci-E PFC active 80+ Bronze
MSI NVIDIA GeForce GTX770 OC Gaming TF IV 2GB 256bit Dvi/Hdmi/DP PCI-E 3.0
Budget: almost 2000€
Can anyone help me finding a new configuration with the same budget but with new-recent hw components?

Double the RAM to 32 GB at a minimum.
Use a full size case, not a mid-size. You'll get better air circulation and have room for expansion.
Add a couple more hard drives.
Get a 850w gold power supply.

Qosmio X300-11W - HDD Capacity and RPM

Hi all,
Quick question.
What is max HDD capacity and RPM for x300-11w
I wish to change my hdd but don't want to make mistake.
Thanks

Virtually all modern SATA based laptops can take any size HDD. The previous limitation was LBA48, which was limited to 137GB. The next limit is something like 8 Exabytes.
The two things you need to be aware of is:
1) Rotational speed. 7200RPM drives will work in any laptop, but they get hotter than 5400RPM drives. The X300 is a large machine, so a 7200RPM drive will be fine. If it was a compact portable laptop such as a Portege, 7200RPM may not be a good idea, unless the drive is generally a cool running drive.
2) Physical size. Some HDD's can be 12mm or higher - especially if they are of large capacity. Measure the original drive, and ensure the new drive has the same height.

MB5B Report table for Open and Closing stock on date wise

Hi Frds,
I am trying get values of Open and Closing stock on date wise form the Table MARD and MBEW -Material Valuation but it does not match with MB5B reports,
Could anyone suggest correct table to fetch the values Open and Closing stock on date wise for MB5B reports.
Thanks
Mohan M

Hi,
Please check the below links...
Query for Opening And Closing Stock
Inventory Opening and Closing Stock
open stock and closing stock
Kuber

Use one account for apps and other for itunes match

Hello everybody
My question today is quite simple. I use one account for apps and tv shows, but inwant to use a different itunes account for purchasing itunes match. How can I use them both on my devices? Will it be asking for my user-pass each time i play a song? What other thing should i consider?
Thank you in advance

I would strongly recommend you not do this. You will regret it.
I have played with this issue a lot. You have to remain signed into match in order for it to show up on your phone. If you sign out to purchase an app or redownload one from your appstore id you use then match will be removed from your phone and when you go into your music app the icloud will not be there. You then have to go sign back out of the store id you used for your app purchase and then sign back into match and everything will have to go though the download to your device process again. This really is not what you want to do.
Sign up to match with the apple id that you know you will use the most or has the most purchased items and use that for all purchases, i.e. books, apps, movies, and music. You don't want to go though the other process.
Plus apple will start not letting you sign into match because you signed out and back in, in to short a period of time.
all store purchases on an iphone are linked to the store id. if you sign out of your match id on the appstore and sign into another account to purchase an app then itunes match will sign out in the music app. You can't have two store id's signed into your iphone at the same time. They are all linked together.

Check for null and empty - Arraylist

Hello all,
Can anyone tell me the best procedure to check for null and empty for an arraylist in a jsp using JSTL. I'm trying something like this;
<c:if test="${!empty sampleList}">
</c:if>
Help is greatly appreciated.
Thanks,
Greeshma...

A null check might not be you best option. If your requirement is you must have both the date and time component supplied in order to populate EventDate, then I would use a Script Functoid that takes data and time as parameters.
In the C# method, first check if either is an empty string, if so return an empty string.
If not, TryParse the data, if successful, return a valid data string for EventDate. If not, error or return empty string, whichever satsifies the requirement.

Jabber for iPhone and iPad cannot receive calls

We currently have Call Manager 9.1.1 and Presence 9.1.1.
I am starting to use the Jabber Client for iPhone and iPad, but am having trouble receiving calls dialed to a particular extension.
If I can go settings for the iPhone Jabber client as an example, I am succesffuly connected to all accounts: IM, Phone Services, Voicemail, and WebEx.
When I go to the keypad, I can succesffuly dial internal extensions and make outbound calls to any numbers and they come accross as using my extension.
When calling the extension, my desk phone rings, but not the Jabber client.
Not sure what could be causing this issue to occur for Jabber not receiving the calls.
Thanks for any suggestions.
Paul Gaydos

Should still work. But would be good to check indial into jabber with the phone unplugged, just for testing purposes.
also, you have checked the partition and configuration on the TAB device is the same as on the deskphone?
Can you attach call manager traces when making a test call and attach to the case. Let us know the extension and device names you have used in the test, and a timestamp of the test.
thanks
=============================
Please remember to rate useful posts, by clicking on the stars below.
=============================

Jasper report for pdf and html

Hi friends I am Gopi
I am doing project in servlet and jasperreport in tomcat.
I save my path jasperreport for Html and Pdf reports.
when i click the jsp button Export to pdf and Export to Html,
I need to open this files in new pdf application and new browser window .
if(pdf1.equals("html"))
JasperExportManager.exportReportToHtmlFile(jasperPrint, path +"\\" + reportName + ".html");
     exporter = new JRHtmlExporter();
          exporter.setParameter(JRExporterParameter.JASPER_PRINT, jasperPrint);
          exporter.setParameter(JRExporterParameter.OUTPUT_STREAM, ouputStream);
          exporter.exportReport();
     if(pdf1.equals("pdf"))
          System.out.println("PDF");
          response.setContentType("application/pdf");
          JasperExportManager.exportReportToPdfFile(jasperPrint,path +"\\" + reportName + ".pdf");
          exporter = new JRPdfExporter();
          exporter.setParameter(JRExporterParameter.JASPER_PRINT, jasperPrint);
          exporter.setParameter(JRExporterParameter.OUTPUT_STREAM, ouputStream);
          exporter.exportReport();
pls help me...

gopikannang wrote:
when i click the jsp button Export to pdf and Export to Html,
I need to open this files in new pdf application and new browser window . Use the target attribute of the <form> or the <a> element which opens the PDF file. Set its value to "_blank".
Learn HTML. There is a nice tutorial at w3schools.com and a good specification at w3.org.

Purchasing Report for invoice and stock

Hi guys,
in your opinion does it exist a unique report which contains the following informations for suppliers:
-          invoice codes from supplier not yet paid
-          POu2019s to supplier not yet delivered
-          ATH stock at supplier
At the moment my customer separates informations per supplier via FBL1N (invoices not paid), ME2L or ME2M (open for delivery), and MB52 (special stock, type O)
Iu2019m looking for a solution were this 3 information will show on 1 screen by entering the supplier.I have tyed with ME2M but it is not sufficient...
Thanks in advance best regards
Massimiliano

hi,
What are you trying to get is an Updates from three different area, which are not connected to each other..
FBL1N will get updated once the Payement is done,
ME2M would be updated once the GR is done, (ME2M does have any selection Parameter which will include 'Payement done')
MB52 would be cumulative Stock on Hand (this stock deoesnt link to PO)
However, you can go for a small Z program to built a customised Report.

For RAL and RPM analysts

Similar Messages

Maybe you are looking for