For ROH system not creating planned order

Hi PP gurus,
Can anybody tell me that system is not generating planned order for raw material but generating it for its Fert of which it is a bom component. For fert it is giving exception message 62.I checked material master MRP type-M0 FOR FERT MATERIAL
MRP type-PD FOR RAW MATERIAL
pLANNING TYPE FENCE IS ALSO MAINTAINED AS 14 days for raw material
Pl.reply ,it is urgent
Thanks in advance

hi,
with which transaction code r u running the MRP??
as per my knowledge u must be doing it with the MD02 with finished product at the header level.
just try this, run the MRP for the Raw material since you are having the dependant requirement with the -ve value, it will create the palnned order.
i am not remebering what is issue?? there is something theorotical,
u just try this
i wil let u knwo furhter once u get the planned order.
in MPS, i am doubtful that it will go for multilevel, thats why its creating only dependant requirement.
you try to run the MRP thr MD01 then u ill get the order.
Let me know ASAP, i will help u out.
REgards
Pravin Mukkawar

Similar Messages

MRP Run can not create Planned order to Sales order

Hi,
I have a problem with planning run to sales order. We have a configurable material which have make to order strategy. MRP Run does not create planned order to some of our sales order. I think it has relation with schedule lines but i can not understand the problem.
If schedule line has 1 as confirmed quantity MRP run can not plan but 0 as confirmed quantity MRP Run creates planned order. How can i solve this problem?
Regards,
techmastere

Hi,
Order for which qty is confirming, check which schedule line is determined and which requirement type system is determining.
then in VOV6 for schedule line tick mark availability check & Transfer of requirement
for requirement class OVZG tick mark availability check & Transfer of requirement
Note: if schedule line is not relevent for availability check & ToR then system always defaul confirm quantity.
kapil

MRP batch job not creating planned orders

Hi Experts,
Can anyone help with suggestions of where/what to look at with this situation. My MRP background (batch) job is not creating planned orders for materials in certain MRP planning areas as expected, but will create planned orders in other MRP planning areas. Running MD01 or MD03 creates planned orders for materials in all MRP planning areas of the plant as expected.

Ben,
Any time you get a difference between interactive MRP and batch MRP, first look to the planning file.
Start out by finding some of the discrepant parts (no planned orders are being created) Review for the presence of a planning file entry in MD21. If an entry does not exist, create one in MD20. If an entry does exist in MD21, but there is nothing in the NETCH/ NETPL/reset ord/reexpl bom cols, then this means no relevant changes have taken place, and NETCH MRP will ignore the parts. You can optionally reset these flags in MD21.
If you discover that you have one material for which there is nothing in MD21 (no record at all), then you probably have others as well. Run MDAB in Background, which will mass create all the missing entries. Also a good idea to run MDRE in case something has been corrupted.
Here is [OSS note 205681|https://service.sap.com/sap/support/notes/205681] which explains a bit about the planning file. Also, See [OSS 371016|https://service.sap.com/sap/support/notes/371016] which describes a similar problem.
Rgds,
DB49

MRP - Create Planned Orders only for Externally Procured Materials

Dear All,
We have a scenario that our client gives us the daily requirement schedule for the current month and a monthly forecast for future months so that we can plan our externally procured materials based on the forecast.
Now I only want the MRP run to create Planned Orders for HALB and FERT based on my current months daily schedule and planned orders for ROH (Externally Procured) based on the next months forecast (monthly).
I dont want the system to create planned orders for HALB and FERT from the forecast. The requirement for the ROH are however derived from the Finished Good BOM and the forecast is also given for the FERT material. I know its a long shot but is there a possibility in the system to do such a thing or a work around?

Your business case is not clear; MRP will create planned orders for inhouse produced materials, and either planned orders or purchase requisitions for external procurement.
You can choose to convert or release external procurement for a long time ahead (eventhough taht if you have proper lead times defined you can release by lead time), but convert inhouse planned orders to production orders only for next period (week, month). Actually this is common practice.
So I fail to understand your problem.

Deployment - setting for system not to create planned orders.

hi
I am executing deployment at the plant level.
i have req. of 8000 on 26th and 9000 on 27th.
i created a stock of 3000 on 25th.
i am executing push deployment and maintained setting accordingly.
After completion of deployment, system deploys the stock ie 3000 and creates Planned order for the remaining 5000 to meet the demand of 8000.
What setting has to be maintained such that system only deploys 3000 or the stock only and does not create a planned order for the unful filled demand. ???
in onther words system should deploy the stock and should not do anything more than that.
Thanks.

Hi Aswath,
Can you answer these few questions for me? I will be able to answer your more appropriately.
What is the order of planning runs in your system?
1. DPR for demand at DC that creates distribution demand at the plant
2. Deployment of the current stock at the plant
3. Planning run at the plant to create planned order for any demand left out
Is that the order? This does not make good sense for me but I don't know your scenario.
What kind of deployment run are you suing? deployment heuristics or optimizer?
In both the cases, you have "delete" and "reduce" option.
The system deploys the stock at the DC based on the distribution demand ( coming from DC to Plant).
If you use delete option, the system deploys for the amount of stock it has and deletes the remaining distribution demand.
So, if you got distribution demand of 100 PCs, there is only 50 PCs stock at plant, the plant deploys 50 and deletes the other 50 PCs distribution demand at the plant. You need to rerun DRP at DC if you want to get back this demand.
If you use reduce option, the system deploys for the amount of stock it has and reduces the remaining distribution demand.
So, if you got distribution demand of 100 PCs, there is only 50 PCs stock at plant, the plant deploys 50 and reduces the distribution demand at the plant to 50 PCs.
I think you have the second case and you are running planning run at the plant and it's creating orders. If you don't want the system to create them, use the "delete" option in deployment run.
Please let me know if I am getting your point right.

Can MRP only create planned orders for ROH, not for FERT?

HI all,
Is there any way to only generate planned orders for raw materials after MRP, forbid creating planned orders for FERT?
We want create planned orders for FERTs manually.
Thanks,
Harvey

Harvey,
Yes, that was also my understanding of your scenario. Did you try X0 for Fert? Run MRP against the entire plant, and MRP will not create any new planned orders for the X0 parts. It will explode the BOM and create dependent requirements in the components. In addition, you can create FERT planned orders manually, or using an external planning system, and these manually created orders will also create dependent demand on your components.
If you are also using Sales orders to consume your PIR, you will also have to look at requirements determination for Sales orders. This is configured based on MRP type. If you change existing MRP types, you may have to add SD config so as to continue to pass requirements to MRP. Your SD resource should be able to help you through this, or I can give you basic instructions if you decide that the PIR/demand/planned order/dependent requirements works to your satisfaction.
Rgds,
DB49

Creating Planned orders and Requisitions for a particular MRP controller and for all the others only Requisition is to be created.

Hi Experts,
Currently we run Program 'RMMRP000' as a batch job to create Planned orders and requisitions.
The client wants that Planned orders and Requisitions should be created for a particular MRP controller and for all the others only Requisition is to be created.
I implemented Exit 'EXIT_SAPMM61X_001' in the following manner by passing MRP controller to user_key.
IF mt61d-dispo <> user_key.
no_planning = 'X'.
ENDIF.
But as you can see that this will not meet my client requirement.
If any of you has worked on similar requirement / if any one knows that this is achievable or not,
please share your inputs.

Moved from SAP ERP Sales and Distribution (SAP SD) to ABAP Development
G. Lakshmipathi

MRP in third party scenario. System not creating schedule lines

HI
I am using third party subcontracting scenario. As i am purchasing material but i am not taking material in under my company. I am paying to my vendor but the delivery is going to my subcontractor.
Here i am able to create planned order or purchase requisition. But MRP is not generating schedule lines for that vendor.
Regards,
Anand.

Hello,
Check the following settings.
1. Source list active in Material master.
2. Valididy of the source list.
3. Any quota arrangement
4. Purchase infor record.
Note: all are OK, but still PR's only created, then check for the requirement date, if the requirement date lies before the validity of the source list then also system will create only purchase requisitions.
for this calculation you have to check the lead time for procurement cycle you have to check. Based on this no. of days only system will try to create the procurement proposals.
If the lead time is very high and this is going beyond the sourcelist validity, then also PR's only created.
So there are so many possibilities. check for the above said things and revert back.
regards,
<Manick>

Only create planned order if no stock

Experts,
I want to setup MTO environment with possible delivery from stock. If I use strategy 20 (MTO) the system always generates planned orders even if there is stock, with strategy 10 (MTS) no planned orders are created.
Flow:
- when sales order is created and there is no stock --> MRP generates planned order
- when sales order is created in stock is available --> no planned order should be generated by MRP
I tried to make a new strategy but can't find settings to make our flow possible. Has anyone experience? I guess this is a situation faced in many companies.
Reward points if helpful answer.
Thanks,
jan

Hi,
I'm not totally sure this is the only strategy suitable for you, maybe you can examine this pdf material:
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PPMPDEM/PPMPDEM.pdf
Have a nice day,
Csaba

Where/ how do I set SNP to create Planned orders with multiple line items?

Hi
Currently our SNP is generating planned orders on a daily basis, it creates a single order with a single line item per location.
Where/ how do set SNP to create planned orders on a daily basis to generate a single order with multiple line items per location, so therefore one planned order with multiple line items for a single location.
Thanx
Keegan

Hi Keegan,
In SNP (APO) it is not possible to create order with multiple line items.
But you can do some settings so that while planning system can do aggregation and disaggregation.
But your requirment should be set on Aggregation/Dis-aggregation logic.
Please follow the follwing links:
http://help.sap.com/saphelp_scm2007/helpdata/en/2c/c557e9e330cc46b8e440fb3999ca51/content.htm
Aggregation:
http://help.sap.com/saphelp_scm2007/helpdata/en/42/f731d078e73ee4e10000000a1553f6/content.htm
Disaggregation:
http://help.sap.com/saphelp_scm2007/helpdata/en/a6/ebefaf32e22e468355da304cc59387/content.htm
Please be sure that the setting of this logic will be at planning area level.
You can't change aggregation/disaggregation logic further.
Regards,
Santosh

CO08 can not create Production Order!!!

Dear Experts
We are running an MTO(make to order) scenario!
First we create an contract in the system!Then we create sales order
with reference to this contract!
And when the sales order is sent to the planning department! They use
TCODE:CO08 create production order with reference to the sales order!
But we get an error message as follows:
Account assignment cannot be carried out because of different origin no.
Message no. V1134
Diagnosis
The sales document to which you want to refer is based on sales document 41033737 and item 000010.
Therefore, the settlement and possibly inventory management are carried out using the number of the
preceding document.
ut when I entered the the contract in Co08 and then I am able to create
the production order.
And when I back to see the detail in the sales order ,I find there is no
value in the account assignment to the profitability segment!!
Why the sales order have no profitability segment??*
Why we can not create production order with reference to sales order??
It seems there are one problem!
Thanks for any reply!!

Fei Liu,
The current situation that you have described is pretty standard functionality for most MTO requirements classes. Account assignment is normally to the reference doc, not the 'Release' Sales doc. This includes quotations as well as contracts.
If your business requirement is to instead use the Sales Doc number, and not the Contract number, you can change this by setting OVZG "Account Assignment Consumption" to 'blank'.
http://service.sap.com/sap/support/notes/459734
http://service.sap.com/sap/support/notes/729381
Rgds,
DB49

Error while creating planned order in product view

I am getting following error when I try to create planned order for a product in a Location manually in product view using /SAPAPO/RRP5.
Error occurred while creating order
Message no. /SAPAPO/RRP251
I checked the product and resource. Everything looks good.
Block is available in the resource WMP1_2041_001 for characteristics specified in planned order.
Product master and PDS look good.
In the planning log, I see the following error message.
Plan explosion failed for product LBRA1050-661 in location 2041
Message no. /SAPAPO/RRP718
I have not found SAP notes for above error.
Can you pl let me know what this is due to?
Thanks,
Srini

Srini,
The message was created as a result of several notes, such as 1582997. There are others.
The implication is that you have an invalid source somewhere in your BOM. Maybe a bad component part, maybe a bad transportation lane, maybe an invalid BOM, or maybe a bad PPM/PDS.
If you can't find the problem using logical troubleshooting steps, have one of your programmers debug. Have him put breakpoints in FM /SAPAPO/RRP_PLORD_CREATE . If you are particularly lucky, you will find a developer that understands German, because all the internal comments in this FM are in German.
Best regards,
DB49

Error while creating Planned order in SAP PP

Hi ,
I am creating planned order for finished material and system has given below error - Please specify the order deadlines in ascending order.
SAP Message Error- Message no. 61009 Please specify the order deadlines in ascending order
Very first planned order get saved and we declare the production and business completed
Now creating second planned order , while saving system giving above error.
I am Taking Planned Order Profile LA -Stock order
Any solution ...?
Thanks in advance !!!
Deepak.

Hello Deepak,
Please adjust the order dates in the scheduling of the planned order. In normal production scenario operation completed end of the night shift and order finish date is possibly moved one day in the future for this reason we need to set the operation timing in 24:00:00 format
In your issue change date like this
End date : 30.06.2014
Start : 31.05.2014
Opening date : 31.05.2104
Check with this date, it’s work for you
Regards
Umesh Mali

DBIF_RSQL_SQL_ERROR while creating planned order in ECC

Hi ,
Recently we have done the ECC6.0 migration. Migration in the sense
Server A ECC6.0 Maxdb to Server B ECC6.0 Sqlserver.
we took the database export from server A and imported to Server B.
After completing the migration we are facing a problem.
Using Trx code MD11 I am creating Planned order. It is giving Planned order XXXXX will be created.But when I go MD13 and try to retrive the same planned order it says the order XXXXX doesn't exists.
when I try to go back from MD13 it shows Express document "update was terminated" received from Author ************.
I am seeing a dump in ST22.
Error 22.04.2010 DBIF_RSQL_SQL_ERROR CX_SY_OPEN_SQL_DB
Cann't insert NULL into column "ADCODE" Table "RESB"
Column doesn't allow NULLS . Insert Fails.
Any Help is Appreciated.
Regards,
Guru.

Hi Srini,
Please kindly review and evaluate note 686357 for possible solution.
686357 able pool nametab length incorrect after Unicode
The following pools may be affected: ATAB, GLSP, GLTP, DVPOOLTEXT, KAPOL
Please kindly run report RATPONTC to reset the dictionary and nametab length in the note.
Regards,
Mauro

How To Automatically Create Planned Orders When Sales Order Is Saved

I have a MTO sceanrio where we need to create planned orders when sales orders are saved without running MRP.
I have the Planning Strategy Group set to 81 in the material master, but it didnt create the planned orders.
Could you tell me other settings I should review to make the planned orders create automatically?

Tony,
At the "Requir. Classes" (OVZG) customizing screen, field "Automatic start of make-to-order in background mode" affects the automatic planning. See fields help doc. below.
    If you select this indicator, the system automatically carries out
    single-item, multi-level planning for a sales order if a sales order
    item is either created or changed.
    This function can only be used for make-to-order production.
So check out the Req. Cl that yr Req. type (req. type is part of a strategy).
BR,
Elly

For ROH system not creating planned order

Similar Messages

Maybe you are looking for