For routing maintain set up, machine ,labour time
Hi !!!!
Gurus !!
I am working in routing.When I want bom 25 kg for each mterial .only m/e break hr is 4.
Company not given set up ,labour time what should I maintain int the routings.
Working on mto scenario.
Thanks with Regards,
Nitin
Hi,
Kindly elaborate your question what is the relation of 25kg bom with the 4 hrs?
Regards,
Syed
Similar Messages
-
Which table can give Operation wise Machine/Labour Std Value Time
Dear Sir,
We need to know the Table name which can be used to get Operation wise Machine/Labour Std Value Time for a given Production Order .
Using CO03 . we can get Std Values displayed for the Machine/Labour Time by double click on the operation . Using Help , it shows that displayed is based upon the structure AFVGD .
Kindly help us to know that using which table , structure AFVGD is fetching this required data filed value .
Rgds
Sonia AgarwalDear Soni,
Plz refer my reply from this thread
[table that contains planned labour hours of operation;
Regards
Madhu -
On the initial set up for apple tv it just sits there trying to set the date and time . it is a wireless setup and the ipaddress and router address is correct . I can't get by this screen. The setting is on automatic and I have picked a city in my time zone yet it still tries to set a time and date but fails.
thanksMake sure router is up to date. Try ethernet to rule out any wifi issues. Reboot ATV and router.
-
Hi
On my macbook pro
I'm try to set up a new Epson printer SX 445 to my router/network but each time I run the set up wizard it fails to complete saying Security Key/Password Check fail.
*entered security key/password does not match the one set for for router.
I know that the password is correct and have rechecked this by changing it a few times
and I still get the same result.
My network internet service provider is not interested and says to call Epson.
Anybody have any clues how I can resolve this?
RegardsI personally suggest the new Drobo FS. Since it has an iTunes server built in and you can use any size sata hard drive in it it is better and a NAS that has to use the same size drives.
-
i am setting u a new time capsule. i already have a wifi setup in my office. now i want to use this time capsule just as a wireless backup machine. do i still need to attached a DSL cable, or it can connect to my existing wifi and start working ?
You probably can, but this type of configuration is not recommended or supported by Apple.
Two cautions if you want to try this:
1) The Time Capsule has to be configured to "Join" your existing wireless network in this type of setup...and to do that, you must know the exact type of wireless security that your network is using.
2) Backups are likely going to take twice as long. The wireless signal must travel from your computer to the wireless router and then from the wireless router back to the Time Capsule. Two "hops"......even if the computer is located close to the Time Capsule.
If you want to try this, we can tell you how....but with no guarantees on your results....since this is not officially supported. -
I have an IMac with an external hard drive set up as a Time Machine for automatic backups. I want to add a second external hard drive and load my Aperture Photo Library on to it so that the library can be shared by both me and my wife. Is there a way to automatically backup the photo library that will be on the second hard drive to the Time Machine hard drive?
Open System Preference > Time Machine
Click Options....
Ckick on external disk in list and hit the - button below the list to remove from the Exclusion list
Allan -
How to get remaining time for baton after setting timeOut property
Hello,
Is it possible to get the remaining time for baton after setting timeOut, or do I have to maintain a separate Timer for that?
Been following this excellent tutorial here http://tv.adobe.com/watch/adc-presents/create-shared-forms-in-livecycle-collaboration-serv ice/Thanks Nigel, before reading your reply, I came up with something like this, but it seems extending the Baton class is not enough, as I would need my own BatonProperty as well that uses this extended Baton class...
Also attempted to get some help here http://stackoverflow.com/questions/7116814/actionscript3-lccs-how-to-access-property-paren t-class-protected-var/7116882#7116882
Could this be made into a feature request for Baton and BatonProperty, se we could easily get the remaining time please? I guess I can wait for a future release.
/custom as file /
package com.mysite.BatonExtender
import com.adobe.rtc.sharedModel.Baton;
import flash.events.TimerEvent;
public class BatonExtender extends Baton
public function BatonExtender()
super();
_autoPutDownTimer.addEventListener(TimerEvent.TIMER,countDown);
trace("CURRENT TIMER:"+_autoPutDownTimer.currentCount);
trace("BATONEXTENDER added");
public function countDown(p_evt:TimerEvent):void {
trace("TRACING START countDown....");
if (_autoPutDownTimer.running) {
trace(_autoPutDownTimer.currentCount);
//sharedTimer.value = String(90 - _autoPutDownTimer.currentCount);
trace("TRACING END...."); -
Getting a NAS for photo storage but want to run Time Machine to separate drive
My late 2009 iMac is getting dangerously full but, as a photographer, I need quick and easy access to my files. I am planning on getting a NAS setup for photo storage, setting up two drives, with RAID 1 as a backup, in case of a hard drive failure.
Once I have moved all my files to the NAS, I want to use Time Machine to backup my system to an attached external hardrive (as I have always done), and use the NAS separately, for storage, file sharing and remote backup when I am travelling.
After some research, I am looking at the Synology DS413j or the QNAP TS420.
I need reliability, compatability and ease of use, and don't want to spend £400-£500 without being sure that I'm not opening a can of worms.
Does anyone have any experience with either of these?
Thankswell thought out chain of logic on your setup and best choice on the Synology.
As for reliability, Synology is just a fancy box, ...the most reliable from many perspectives,...however the actual HD contained therein can only be one of 4 diff. mfg.(hitachi, toshiba, Seagate or WD)
http://www.amazon.com/Synology-DiskStation-Diskless-Network-Attached/dp/B008U69L C4
Do not consider, as recommendation, any WD Green drives, rather WD red, or, best: black grade drives (best and highest rated in quality).
Ultimately with much HD experience, everything boils down to data REDUNDANCY, and the very best of HD, as much testing by others proves, will fail invariably.
Ideally youre leaving out a final important link in your data protection, a final redundancy NON-RAID , not attached copy of all this data frequently updated and not left attached for protection.
Methodology to protect your data. Backups vs. Archives. Long-term data protection
Secondary data on a single external HD or RAID array is not a redundancy, but a PRIMARY data copy. First Redundancy takes place on a Secondary storage medium/locus. (both of these external of course)
2nd level protection in any redundancy necessitates it "be unconnected"
Data ON the actual computer is not considered, ergo a single copy OFF a computer is just that, a backup / copy. Redunancy begins as secondary to a FIRST COPY -
Can I set up a default time for iCal events?
Can I set up a default time for iCal events?
That's actually how Guest Access feature works. You can share internet to your guest/visitors without giving them access to your local network. You may configure the Guest Access settings on the router using Linksys Smart Wifi through the local access interface; check this site for the instructions, http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=b509a1805dd6416ebb0e35a7e5a58937_Configuring_Guest...
Added Info:
Guest Network Frequently Asked Questions
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=f35bd58fda4148929ac482f3c7968e04_Guest_Network_Fre... -
Looking for a back up drive for photos and videos that works with time machine, prefer wireless. Time capsule has poor reviews and already have BT hub that serves as a good router. 3gb or 4gb capacity preferred but 2 would suffice.
Plug a NAS into the BT Hub that does TM. Look at Synology.
You just use the wireless of the hub.
But the cheapest solution is still the TC. -
I am setting up a new Time Capsule to replace another hard drive. Is there any way to include the the Time Machine history from the old drive on the new Time Capsule?
Check item #18 of Time Machine FAQ, particularly the material in #3 of the "How to" section.
By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject. In the future just type a short summary of your post into that field and type the whole message into the field below that. -
Setting Equalizer for more than one song at a time
Is there any way to set the equalizer setting for more than one song at a time. For example, if I have a classical music album with 10 songs, can I set the equalizer for "classical" for all 10 songs at once? It's a pain to have to do it for each one individually. I tried using the "shift" key, but to no avail.
Thanks,
Joe The Authorhighlight all the songs you want then right click and go to get info. in the options tab at the top there is an equalizer preset option.
-
Setting color codes for more than one photo at a time
Is there any way to set color codes for more than one photo at a time?
Hi John,
I will look at keywords. My issue is speed. Right now I am culling and editing an event shoot that spanned a week with 35 separate events and more than 5000 images. So I use the fastest most convenient method I can and it still takes a long time to have a completed and final shoot. On this shoot I will end up with a final set of around 1500 images. Right now I am finishing processing a show that will hang in the Deutsches Amerikanish Zentrum in Stuttgart.
As I am sure you are aware by now, having seen enough of my inane questions that over the last two years or since Lightroom version 1.xx if I could not figure out how to do something I skipped it. So many things in Lightroom are buried and unless you have a mind like a steel trap (and think that some of you guys in the forum do) locating how to do something is not obvious.
For example, I only learned (in the last hour) that I could assign colors as a group of selections by using Shift + number. I found this in a side head in Martin Evenings Lightroom book. I still do not know how to find a way to display the color filter "selection" set in Library mode. Is there a way?
To top it off, Stuttgart Media University asked me if I would add a Lightroom module to my schedule this year. Now I have a compelling reason to learn all those missing pieces that I have created workarounds for. Hence the number of posts you have been seeing from me over the past few of weeks.
I tell my class that there are no such things as stupid questions, only questions. Now I am practicing what I have been preaching for the last gazillion years. Guys like you have been great.
My workflow is
1. I first separate all images by event. I do that at the time of import.
2. I do a fast pass rejecting all the obviously bad images
3. I do a second pass grouping the images by sub-group (speeches, people talking, performances, etc.) This is where I run out of selection methods and your key-wording could work but it would probably take too much time to establish a keyword set for a single event. Where I have more than five subgroups I set up different collection sets with one collection for each sub group. However I would like to keep a single event in one collection.
4. I then select the images to be used by color code.
5. Next I process the final images (crop develop etc) by collection.
6. Last I output the set according to client requirement.
If you have a better workflow, I am all ears.
By the way, what is your photo specialty and where are you located?
Jim -
I set up a new router and the windows machines connect fine. My MacBook Pro does not. I go through the airport assistant and see the network yet when I enter the router WPA password I get a message back saying that the password is incorrect. And, it isn't! Very frustrating. What can I do as I had the same problem after I tried to reinstall my last router. Again, only on the Mac. Thanks!
If you kept the same Base Station name and network name, that can confuse Keychain Access. Either change the Base Station and network name, or open Keychain Access Utility and delete any reference to your Base Station and network name. Make sure you delete from the Login and System keychains.
-
I have two time capsules, one for work and one for home, how do I set up the work time capsule to only back up my work files? Also, how do I add co-workers to my work time capsule and wife to my home time capsule? Thank you!
You cannot have two different TC setups.. at least until Mountain Lion.. it did introduce some changes but I am not sure if you can setup two different configurations for TM.. you can use two different devices to back up to. I doubt this will help you.
You might be better using a real backup software.. superduper, CCC, chronosync etc.
The TC by default is available to any Mac in the network to do backups. TM will sort itself out and put each computer on a different backup. These are kept in separate sparsebundles.. so that is all fine.
Maybe you are looking for
-
The calc script for the Export cdf shows @Jexport being executed like rollup functions - in that there is no requirement that you have 'member = @Jcdf'.When I try this with a sample cdf, I get an error 'not a CALC command'.How do I get Essbase to rec
-
I have a photsmart 3110 that doesn't want to print black. It will print any other colour except black. Black and white documents are blank peices of paper. Sometimes we get a 0xc19a0013 error, but thats just related to the black ink. I have installed
-
Hopefully simple newbie question
Hi, I just started using NetBeans 5.5 and Java in general. I have a created a .jar stand alone program that works fine. I created it from a general project in NetBeans. I would now like to "deploy" this program via the web somehow so other people can
-
Any way to search from websites?
Hi! Is there any way to search words from websites? E.g. User gives a word and a website address (can be also specified manually) and the program checks, is there that word in that website. Thanks!
-
Downward flow control problems
Hey Guys, I'm trying to understand the WL documentatino on controlling flow (downwards) in WL7. Imagine I have flow max of 700 and flow min of 100 and step of 6 and interval of 60. For upwards, I unde