For some reason my iPhone 4s suddenly will not "start sync" when I attach it to my macbook pro. It has worked fine until now. help!
I have been using my iPhone 4s for a while and had no problem syncing it to my macbook pro with Lion. Suddently today it gives me a message that sync does not start. What can I do to fix this?
Oops...my phone is running 6.0.1
Similar Messages
-
I am trying to update my software through the app store but for some reason an error occurs and will not allow me to do so. And when i go online to log into my apple id account it states that there is an error. Can someone help me solve this issue, its annoying me?
Apple’s having trouble with the iTunes Store servers right now. Wait for them to resolve the issue.
(123935) -
I have been regularly using an IP.board hosted forum on Mozilla and it has been working fine until as of 2 days ago I suddenly unable to see the post editor icons.
I looked and found a similar problem as addressed here: https://support.mozilla.org/en-US/questions/971904
unfortunately, that remedy given there did no work for me.
,Thank youWhat do you see instead of those icons?
Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.
If you see little boxes that show the hex code of the characters then those missing icons are actually supplied by a font that is downloaded from the server (@font-face)
Make sure that you allow pages to choose their own fonts.
*Tools > Options > Content : Fonts & Colors > Advanced: [X] "Allow pages to choose their own fonts, instead of my selections above"
You can check the <b>gfx.downloadable_fonts.enabled</b> pref on the <b>about:config</b> page and make sure that it is set to true (if necessary double-click the line to toggle its value). -
I have just upgraded my iPad to iOS 7 and now FaceTime and iMessage will not allow me to sign in. I enter my appl I'd and password but after a few minutes I get a message to say cannot activate try network connection then try again no matter how many times you do this it will not sign in. Any thoughts ?
Thanks neiltry resetting your phone by turning it off and back on again. The servers may still be having a hard time keeping up, so you may just need to wait a little while and try again.
-
''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/810160]''
This just started happening a few days ago. When I go to facebook the pictures are distorted and nearly impossible to discern who is in them. I also go to many different websites that do not load correctly. Not sure if it's java, adobe, or something else but it makes browsing the internet not fun. HELP!I have the same problem. It seems to be due to FireFox 4.0 being unable to load certain embedded content, which Firefox 3 was able to load properly.
I've been having problems loading any website that includes embedded content from worldnow.com, for example. -
Hi. For some reason my iPhones sound for all ring tone, lock, music loudspeaker has become very foamy and can hardly hear it. Both speakers are still working however just at low sound. In settings volume is turned up and bottons on the side are fully up.?
maybe there are dirt, sand and lint in the speaker output grill ?
-
My iPhone 5S suddenly will not sync calendars with iTunes on my iMAC. I recently upgraded the iMAC to version 10.8.5. Am I missing a setting somewhere?
Hey Oynkus,
Thank you for visiting Apple Support Communities.
You state you updated your iMac to OS X 10.8.5. Did you update iTunes as well?
If so, you may find the calendar sync options under Info.
Sync contacts, calendars, and other info with iPod, iPhone, or iPad - iTunes Help
Sync contacts and other info with iPod touch, iPhone, or iPad
Connect your device to your computer.
Click the device button, then click Info.
Select the items you want to sync.
Click Apply.
Take care,
Nubz -
After installing the new software to my iPhone 4S , my dream zoo either will not start or when it does it has a blank screen that has a few icons on it that wont work. How can I fix this is it possible to go back and reinstall the older software ?
Unfortunately I tried that and it didn't work. Thanks for the help though. I tried to uninstall and it said I couldn't because the file is corrupt or something, but I think I finally got it uninstalled and/or deleted or whatever, but now I try to reinstall/download it again from the beginning and I can't. No matter what I do I can not get Firefox working again. No matter how many times I try to redownload it. Any other suggestions?
-
Itunes will not start automatically when iphone plugged in
itunes will not start automatically when iphone is plugged in. it used to. now it turns on iphoto but not itunes. the option to check "open itunes when this iphone is connected" is ghosted and cannot be selected.
i have ios 5 now, but it also did this with the previous os.Hi billm1013,
I'm sorry to hear you are having these issues with your iPhone. If your iPhone isn't being recognized in iTunes, and/or iTunes isn't responding to your mouse when the iPhone is connected, you may find the troubleshooting steps outlined in the following article helpful:
If you don't see your connected device in iTunes for Mac - Apple Support
Regards,
- Brenden -
Suddenly today, my iPhone won't send pictures to certain people...has worked fine until today.
Suddenly today, my iPhone won't send pictures to certain people...has worked fine until today. Sends fine to some but not to others. What's up?
Like any electronic item, it sometimes gets inexplicably balled up. The reset is no different than rebooting a computer that is acting hinky. If you don't have to do it often, then it is not anythign to worry about. (I know - not the kind of tech talk you were probably expecting, but the words selected are about as scientific as you can get concerning this type of weirdness....)
Cheers,
GB -
my Iphone 4 will not start up, when i connect it to itunes i says : Activation error This device is not registered as part of the iPhone Developer Program.If you are a member of the Program, please register your device in the iPhone Developer Program Port
Well, you downloaded a bootleg copy of iOS 7 beta and have installed it on your phone without being a developer. It has bricked your phone and you cannot get help here because doing what you did has voided your warranty. Have a nice day.
-
I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
Anyone have an idea on other things to try to debug/resolve this?
Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
Thanks!After a week's worth of debugging, I found the issue.
The Java type returned from the call was defined as ArrayList. Changing it to List resolved the problem.
I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid. And, why it works in Debug mode and not in Release build is even stranger. Maybe someone can shed some light on the logic here to me. -
My mac book pro 2.3ghz intel core i7 will not start up. I get the apple and the circle thing but thats it. Please help!!!
Give this a try:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
My MacBook Pro will not start. When I started it goes to a gray screen with the Apple logo and has the spinning dial. When I started in safe mode it will not start. In safe mode it as an error message that says MacBook Launch_msg(): Socket is not connected
If running 10.7 or later hold down Command-R at Startup.
This should invoke recovery Mode.
Choose Disk Utility.
Select your Hard drive. Inspect the SMART Status in the lower right of the window for "Verified".
Select the Mac OS X Volume (originally Macintosh HD) click (Repair Disk)
If errors, run again until it comes clean or gets stuck.
Report any error messages. -
my ipad still will not start. When connected to wall charger it shows the connect to itunes. When connected to computer it is a black screen and slightly blinks
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Cheers, Tom
Maybe you are looking for
-
4 iPods, 1 computer with Multiple users
I love my iPod but I hate the iTunes software. We have 4 iPods, a PC with WindowsXP and 4 user profiles. If we log on as my son, we can all use our iPods - but if I log on as myself, iTunes doesn't start (ironically, I'm an "administrator", he's a "s
-
As we all get more and more used to sending texts instead of picking up the phone and calling someone, I find that people try and reach me when I am driving and I have no good way to tell them I'm in the car or unavailable and not just ignoring them.
-
I cannot access CF10 developper built in server remotely
Just successfully installed CF10 developper ediiton with built in server I can access the web pages from the dev server on http://localhost:8500 or http://192.168.1.49:8500 But I cannot access the pages from a remote computer on the same network Any
-
Do they make a cable or device that can take the audio and video RCA and convert it to a HDMI out?Thanks!
-
HT201270 how do i get my old contacts back when ive updated my tunes account
how do i get my old contacts and messages back since i updated my iphone software to newer version, since i did this i can not find my backed up iphone contacts / messages??? regards,