For some reason my ipod touch says it has maximum number of free accounts activated when I try to sign into the cloud how do I fix this
For some reason my ipod touch says it has maximum number of free accounts activated when I try to sign into the cloud how do I fix this. I have done the reset multiple times
Dreat a new account on a device that still has the ability to create accounts
icloud: The maximum number of free accounts have been activated on this iPhone.
http://forums.macrumors.com/showthread.php?t=1242428
Similar Messages
-
I signed up for iCloud and downloaded everything for it. According to my iTunes account, everything should be swell, but when I try to sign into the Cloud, it tells me my Apple ID is valid but it's not an iCloud account. What do I do??IC
Hi DesCoop,
You must initiallly activate iCloud from an IOS device or a Mac. You cannot inititally activated from a PC.
Sorry.
GB -
My ipod touch 4th gen. will not allow me to adjust volume with my speaker, but will with headphones. How do i fix this?
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Reset the iOS device. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack or other hardware problem
Apple Retail Store - Genius Bar -
My computer is saying it can't find the file 'iTunes64.msi' when I try to update or redownload iTunes how do I fix this? I've tried just about everything I can think of. I am using a dell laptop running windows 7 and have tried changing the file location to run the update in all of my iTunes files as well as when I've tried reinstalling it.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2 -
I have an Ipad My apple ID and password works for Ibooks and Icloud but when I try to get into the app store it doesn't show my entire email address on the account. When I try to get into the app store it tells me my password is incorrect. How can I correct this? I have been emailing support but so far they have been no help
Open the App Store app, go to the Featured pane, swipe to the bottom, tap the Apple ID and sign out. Tap again and sign in with the Apple ID of your choosing.
-
My daughter has changed her ipod touch password and it will not allow her to put in letters so therefore she is locked out! How can she fix this?
Connect the iPod to its syncing computer and restore via iTunes. If iTunes asks for the passcode and you can't enter the passcode or yu do not have the syncing computer, place the iPod in recovery mode and then restore. For recovery mode see:
iPhone and iPod touch: Unable to update or restore -
Has anyone encountered this issue? Any sugestions highly appreciated. Thanks!
You have to continue to use that old ID for these apps.
Apps and all purchased content are always tied to the Apple ID that was used to purchase the content. You can't use a new ID, transfer the content to that ID and sync the content with the new one. You have to use the old ID in order to sync and update those apps.
Log into the old ID on the iPad in Settings>Store>Apple ID.
BTW - that was not a great idea - purchasing apps with the old ID and then creating a new ID. If you can continue to use that old ID - just keep using it and forget the new one. -
i can plug it into the wall adapter and it works fine but when i try to plug my usb ipod charger into my windows to update my I.O.S it doesnt work, what can i do to solve this problem?
See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Run this to help if it identifies the cause
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem? -
Any ideas ?
On her iPhone, she needs to change a setting:
Settings/ Messages/ Send & Receive/ Start New Conversations From:
and then select her phone number, not her e-mail.
You both should probably delete any conversations that originated from her e-mail address if you want to avoid perpetuating this confusion. -
When i try to sign into the eprint account it says that my password is incorrect,
If I try to say I forgot my password it doesn't recognize my email address and if I try to create a new account it says it already exists
I will need a little more info in order to help out. Is this the first time you are trying to set up an account and add a printer? Or have you been there before and now it will not let you sign back in? What type of printer do you have? You might be stuck in a snapfish error loop, that would be where you have gotten signed up at snapfish at some point, possibly without knowing and now its preventing sign in at ePrint center. But to determine if that is the case, I will need to know if you have ever successfully set up an account. Then I can provide instructions to resolve that.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved? -
I am using a Windows 7 computer if that helps at all
Hi thejenaem,
Please refer the following help article on the problem "You have been signed out"
You are no longer signed into your Creative Cloud applications
Hope this helps.
Let me know in case of any problem.
Thanks and Regards,
Sumit Singh -
For some reason my IPOD touch will not connect with the Itunes store nor will it sync with my PC. Whats up with this?
How To Fix 0×80090318 and related errors – Windows 7, XP & Vista
Also Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"? -
i have a new email so have a new apple ID now and am trying to change it in icloud. but it has locked me out and won't send my email a reset password link for some reason. even though it says its sent, it doesnt come to the email address. help!
Welcome to the Apple community.
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
You will need to show patience with the procedure and be prepared to demonstrate without question that the account belongs to you. Don’t expect access to be restored immediately and if you aren’t the owner of the Apple ID registered to the device the account won’t be reset.
This is answer is provided from my own database of boilerplate responses and the content was last reviewed and/or tested on: 2014/12/18 -
My new ipod touch say it has been disabled for 21,728,990 minutes.How do i fix that!
You need to place the iPod in recovery mode and then restore it via iTunes on yur computer. Restore from backup if you have a backup. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
For more information see:
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen -
For some reason my itunes library says it's a previous library, how do I change it back to the regular library?
''(sorry, seem to have pasted the wrong reply message)''
Maybe you are looking for
-
Can you delete songs that are already on your ipod?
My Ipod automaticly downloaded all of the songs off of my itunes, and I don't want most of them on there, is there anyway to get rid of them?
-
There is no task in UWL when i assign expression as responsible for a task
Hi @, I create a simple process BPM on Process Composer, there is a task and a service to start this process. When i assign specify user for this task (e.x : ABC), i start process using the service, it's ok, there is a task is assigned to ABC. But wh
-
I'm using Flash Prof 2004, All other software connects to internet fine, except for flash 2004 swf files made in 2004 authoring app. I have Flash player version 7 installed. I've turned off my firewalls and still no connection from any swf within fla
-
NFS stall in 10.2.0.4
After about 5 hours of continuous update/insert activity to an NFS mounted system we see a stall that may last several seconds and then performance resumes. It appears to be a DB cache issue as well as something with the actual NFS process. Has anyon
-
BPM User decision Agent assignment
I am working on User decision steps in BPM. I have added Configurable Parameter in Integration Process but after importing it into ID, I am not able to assign any user in parameters. Once I put the value and save/activate, value got cleared out.