For Switzerland country unable to add family dependedts

In ESS u2013 Family Members/dependents, we are not able to add a child / Spouse. It shows an error. Insured number is vacant   but there is no field for insurance number in the portal.
Any helpfull suggestions please
Regards,
Murali
Edited by: Murali Manohar on Jan 18, 2009 11:55 AM

Yes I believe so as well.  The reason why they do this... If you have the money to add a line you should have money to have all lines active which is the original intent for suspend a line without billing.

Similar Messages

  • I would like to add family members to my existing apple id that is used for my iCloud account.  All of the family members already have existing apple ids.  Can I make these existing apple ids part of my family?

    Adding existing apple id to an iCloud family share
    I would like to add family members to my existing apple id that is used for my iCloud account.  All of the family members already have existing apple ids.  Can I make these existing apple ids part of my family?  I have tried this, but "verifying" the apple id always fails with "existing family member" or an error something to the effect "unable to do at this time, try again later."
    Thanks

    "am I still able to register another phone to the same ID?"
    Yes.
    ") that I do end up creating a new apple ID "
    This will cause complications.  i do not recommend this.

  • Unable to add account to Outlook 2010 for email address under custom domain

    I am unable to add a new account in Outlook 2010 for an email account set up under a custom domain.
    Can anyone explain why login credentials that work for outlook.com (successful access to email inbox) return an authentication failure (401 error) when used to test connectivity via https://testconnectivity.microsoft.com?
    Details:
    I set up a custom domain at https://domains.live.com and did the following DNS configuration steps at my web hosting company following instructions from domains.live.com:
    Created custom MX record
    Created CNAME record [name:] autodiscover.jrergonomics.com [value:] autodiscover.outlook.com.
    I created email addresses at domains.live.com > jrergonomics.com > Member accounts and tested by successfully logging in to outlook.com.
    When I try to add either account to Outlook 2010, I get a popup box with this information:
    Title: "Windows Security"
    Connecting to [email protected]
    [[email protected]]
    [ ] Remember my credentials
                                       [   OK   ]  [  Cancel 
    The credentials that I use successfully to log in to outlook.com don't work here; I get the popup box 3-4 times and then the Outlook 2010 Add New Account dialog displays an error:
    "An encrypted connection to your mail server is not available. Click Next to attempt using an unencrypted connection."
    Clicking Next results in an error message:
    "Problem Connecting to Server"
    I have tried verifying the connectivity using https://testconnectivity.microsoft.com:
    <?xml version="1.0" encoding="utf-8"?>
    <testresult status="FatalError" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="The Microsoft Connectivity Analyzer is attempting to test Autodiscover for [email protected]." resultdescription="Testing Autodiscover failed." additionaldetails="" elapsedMilliseconds="40517">
    <children>
    <testresult status="FatalError" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Attempting each method of contacting the Autodiscover service." resultdescription="The Autodiscover service couldn't be contacted successfully by any method." additionaldetails="" elapsedMilliseconds="40517">
    <children>
    <testresult status="Error" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Attempting to test potential Autodiscover URL https://jrergonomics.com/AutoDiscover/AutoDiscover.xml" resultdescription="Testing of this potential Autodiscover URL failed." additionaldetails="" elapsedMilliseconds="21181">
    <children>
    <testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Attempting to resolve the host name jrergonomics.com in DNS." resultdescription="The host name resolved successfully." additionaldetails="IP addresses returned: 64.90.49.188" elapsedMilliseconds="146">
    <children />
    </testresult>
    <testresult status="Error" errorid="c716c7b4-a473-4ca4-8859-fc9c5bb12ad1" contentUrl="http://go.microsoft.com/fwlink/p/?LinkId=133210&amp;v=ExRCA.1&amp;id=B2E81FE1-5A94-4d07-9D58-AD483268A72A" testdescription="Testing TCP port 443 on host jrergonomics.com to ensure it's listening and open." resultdescription="The specified port is either blocked, not listening, or not producing the expected response." additionaldetails="A network error occurred while communicating with the remote host.&#xD;&#xA;" elapsedMilliseconds="21035">
    <children />
    </testresult>
    </children>
    </testresult>
    <testresult status="Error" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Attempting to test potential Autodiscover URL https://autodiscover.jrergonomics.com/AutoDiscover/AutoDiscover.xml" resultdescription="Testing of this potential Autodiscover URL failed." additionaldetails="" elapsedMilliseconds="4982">
    <children>
    <testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Attempting to resolve the host name autodiscover.jrergonomics.com in DNS." resultdescription="The host name resolved successfully." additionaldetails="IP addresses returned: 157.56.244.217, 157.56.234.137, 157.56.236.89, 157.56.240.137" elapsedMilliseconds="376">
    <children />
    </testresult>
    <testresult status="Error" errorid="c716c7b4-a473-4ca4-8859-fc9c5bb12ad1" contentUrl="http://go.microsoft.com/fwlink/p/?LinkId=133210&amp;v=ExRCA.1&amp;id=B2E81FE1-5A94-4d07-9D58-AD483268A72A" testdescription="Testing TCP port 443 on host autodiscover.jrergonomics.com to ensure it's listening and open." resultdescription="The specified port is either blocked, not listening, or not producing the expected response." additionaldetails="A network error occurred while communicating with the remote host.&#xD;&#xA;" elapsedMilliseconds="4605">
    <children />
    </testresult>
    </children>
    </testresult>
    <testresult status="FatalError" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Attempting to contact the Autodiscover service using the HTTP redirect method." resultdescription="The attempt to contact Autodiscover using the HTTP Redirect method failed." additionaldetails="" elapsedMilliseconds="14148">
    <children>
    <testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Attempting to resolve the host name autodiscover.jrergonomics.com in DNS." resultdescription="The host name resolved successfully." additionaldetails="IP addresses returned: 157.56.244.217, 157.56.234.137, 157.56.236.89, 157.56.240.137" elapsedMilliseconds="21">
    <children />
    </testresult>
    <testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Testing TCP port 80 on host autodiscover.jrergonomics.com to ensure it's listening and open." resultdescription="The port was opened successfully." additionaldetails="" elapsedMilliseconds="59">
    <children />
    </testresult>
    <testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="The Microsoft Connectivity Analyzer is checking the host autodiscover.jrergonomics.com for an HTTP redirect to the Autodiscover service." resultdescription="The redirect (HTTP 301/302) response was received successfully." additionaldetails="Redirect URL: https://autodiscover-s.outlook.com/Autodiscover/Autodiscover.xml&#xD;&#xA;&#xD;&#xA;HTTP Response Headers:&#xD;&#xA;Connection: close&#xD;&#xA;Pragma: no-cache&#xD;&#xA;Cache-Control: no-cache&#xD;&#xA;Location: https://autodiscover-s.outlook.com/Autodiscover/Autodiscover.xml&#xD;&#xA;" elapsedMilliseconds="45">
    <children />
    </testresult>
    <testresult status="FatalError" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Attempting to test potential Autodiscover URL https://autodiscover-s.outlook.com/Autodiscover/Autodiscover.xml" resultdescription="Testing of this potential Autodiscover URL failed." additionaldetails="" elapsedMilliseconds="14021">
    <children>
    <testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Attempting to resolve the host name autodiscover-s.outlook.com in DNS." resultdescription="The host name resolved successfully." additionaldetails="IP addresses returned: 157.56.241.102, 157.56.232.166, 157.56.245.70, 157.56.245.166, 157.56.236.214, 157.56.236.6" elapsedMilliseconds="191">
    <children />
    </testresult>
    <testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Testing TCP port 443 on host autodiscover-s.outlook.com to ensure it's listening and open." resultdescription="The port was opened successfully." additionaldetails="" elapsedMilliseconds="84">
    <children />
    </testresult>
    <testresult status="SuccessWithWarnings" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Testing the SSL certificate to make sure it's valid." resultdescription="The certificate passed all validation requirements." additionaldetails="" elapsedMilliseconds="248">
    <children>
    <testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="The Microsoft Connectivity Analyzer is attempting to obtain the SSL certificate from remote server autodiscover-s.outlook.com on port 443." resultdescription="The Microsoft Connectivity Analyzer successfully obtained the remote SSL certificate." additionaldetails="Remote Certificate Subject: CN=outlook.com, OU=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=WA, C=US, Issuer: CN=Microsoft IT SSL SHA2, OU=Microsoft IT, O=Microsoft Corporation, L=Redmond, S=Washington, C=US." elapsedMilliseconds="163">
    <children />
    </testresult>
    <testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Validating the certificate name." resultdescription="The certificate name was validated successfully." additionaldetails="Host name autodiscover-s.outlook.com was found in the Certificate Subject Alternative Name entry." elapsedMilliseconds="1">
    <children />
    </testresult>
    <testresult status="SuccessWithWarnings" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Certificate trust is being validated." resultdescription="The certificate is trusted and all certificates are present in the chain." additionaldetails="">
    <children>
    <testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="The Microsoft Connectivity Analyzer is attempting to build certificate chains for certificate CN=outlook.com, OU=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=WA, C=US." resultdescription="One or more certificate chains were constructed successfully." additionaldetails="A total of 1 chains were built. The highest quality chain ends in root certificate CN=Baltimore CyberTrust Root, OU=CyberTrust, O=Baltimore, C=IE." elapsedMilliseconds="34">
    <children />
    </testresult>
    <testresult status="Warning" errorid="1339c33a-8f21-427b-a323-4cee1a13f517" contentUrl="" testdescription="Analyzing the certificate chains for compatibility problems with versions of Windows." resultdescription="Potential compatibility problems were identified with some versions of Windows." additionaldetails="The Microsoft Connectivity Analyzer can only validate the certificate chain using the Root Certificate Update functionality from Windows Update. Your certificate may not be trusted on Windows if the &quot;Update Root Certificates&quot; feature isn't enabled." elapsedMilliseconds="4">
    <children />
    </testresult>
    </children>
    </testresult>
    <testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Testing the certificate date to confirm the certificate is valid." resultdescription="Date validation passed. The certificate hasn't expired." additionaldetails="The certificate is valid. NotBefore = 2/18/2014 11:41:01 PM, NotAfter = 2/18/2016 11:41:01 PM" elapsedMilliseconds="0">
    <children />
    </testresult>
    </children>
    </testresult>
    <testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Checking the IIS configuration for client certificate authentication." resultdescription="Client certificate authentication wasn't detected." additionaldetails="Accept/Require Client Certificates isn't configured." elapsedMilliseconds="804">
    <children />
    </testresult>
    <testresult status="FatalError" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Attempting to send an Autodiscover POST request to potential Autodiscover URLs." resultdescription="Autodiscover settings weren't obtained when the Autodiscover POST request was sent." additionaldetails="" elapsedMilliseconds="12692">
    <children>
    <testresult status="FatalError" errorid="6c458392-3a8c-4bc2-942e-7ab533744106" contentUrl="" testdescription="The Microsoft Connectivity Analyzer is attempting to retrieve an XML Autodiscover response from URL https://autodiscover-s.outlook.com/Autodiscover/Autodiscover.xml for user [email protected]." resultdescription="The Microsoft Connectivity Analyzer failed to obtain an Autodiscover XML response." additionaldetails="An HTTP 401 Unauthorized response was received from the remote Unknown server. This is usually the result of an incorrect username or password. If you are attempting to log onto an Office 365 service, ensure you are using your full User Principal Name (UPN).&#xD;&#xA;Headers received:&#xD;&#xA;RequestId: 842d50d9-3e33-4627-8804-98fa0b02070c&#xD;&#xA;X-DiagInfo: CH1PRD0910CA013&#xD;&#xA;Content-Length: 0&#xD;&#xA;Cache-Control: private&#xD;&#xA;Date: Mon, 31 Mar 2014 04:57:26 GMT&#xD;&#xA;Server: Microsoft-IIS/7.5&#xD;&#xA;WWW-Authenticate: Basic Realm=&quot;&quot;&#xD;&#xA;X-AspNet-Version: 2.0.50727&#xD;&#xA;X-Powered-By: ASP.NET&#xD;&#xA;&#xD;&#xA;&#xD;&#xA;HTTP Response Headers:&#xD;&#xA;RequestId: 842d50d9-3e33-4627-8804-98fa0b02070c&#xD;&#xA;X-DiagInfo: CH1PRD0910CA013&#xD;&#xA;Content-Length: 0&#xD;&#xA;Cache-Control: private&#xD;&#xA;Date: Mon, 31 Mar 2014 04:57:26 GMT&#xD;&#xA;Server: Microsoft-IIS/7.5&#xD;&#xA;WWW-Authenticate: Basic Realm=&quot;&quot;&#xD;&#xA;X-AspNet-Version: 2.0.50727&#xD;&#xA;X-Powered-By: ASP.NET&#xD;&#xA;" elapsedMilliseconds="12691">
    <children />
    </testresult>
    </children>
    </testresult>
    </children>
    </testresult>
    </children>
    </testresult>
    </children>
    </testresult>
    </children>
    </testresult>

    Hi,
    Since this is an Exchange forum and your issue is related to domain.live.com, I recommend you contact with domain.live.com support to get quicker and more professional help：<cite class="_Vc">https://domains.live.com/support/
    </cite>
    Thanks for your understanding in advance.
    Best regards,
    Angela Shi
    TechNet Community Support

  • Problem with Family members/dependents screen in ESS for Switzerland countr

    Hi All,
    We are checking standard Fmaily Members/dependents screen in Personal Information under ESS for switzerland and screen doesn't have some fields compared to what we see in pa30 for the same country.if we check for other countries ess portal screen and pa30 screen look similar.when we check switzerland country specific webdypro component layout is different from pa30 and some of the fields are missing.
    why is this inconsistency with only switzerland country and is there any note available for this
    Thanks
    Bala Duvvuri

    Unfortunately you have to, But since the fields are available in backend, It can be easily be made visible in the front end
    changing the properties of the field
    Do make sure you raise a development request if this indeed required by the customer, You can raise a OSS for it, But I am afraid answer wont be encouraging

  • Suddenly, I am unable to add photos to my project in Imovie 11. I have an IMac Snow Leopard 10.6.8 and have made several movies where this worked fine but for some reason, it has quit. Everything seems to be working fine except that?

    I'm an oldtimer and have had this Mac for less than 2 yrs and have LOTS to learn - but I've climbed the curve a little.  !'ve made several movies and published to YouTube and burned to disc using IDVD with reasonably good results. Each time I have added stills to my movies it has worked fine - but tonight, I'm suddenly unable to add them. I click "Photos" -     select my photo - left click the photo and drag into the project while holding the click. Have the green "+" and the green highlight and even get the green vertical bar in the project but when I release the click, the photo simply disappears!  One "clue" here may be this:  I was able to add one still to this project and the only diff between it and the other still thumbnails now is that there is a "green check mark" on the thumbnail of the one successfully added.  Any suggestions?  (I do have the "advanced tools" option selected in IMovie Preferences.)
    Thank you so much for any help at all.
    Sam

    Hi
    My first thoughts are
    • iMovie ill behaving - Trash the iMovie pref file - use to set things right
    • in reg. to Photos - Did You change iPhoto Photo Library - Then iMovie get's lost as it peeks into iPhoto on start up to see where photos are stored. Set iPhoto back to first Photo Library (when iMovie is not running) then start iMovie.
    Yours Bengt W

  • WS-Security and proxy service: Unable to add security token for identity

    What the reason of "Unable to add security token for identity" fault in this situation (10.3.1):
    I did simple "hello word" proxy service and tried to apply custom policy binding.
    WS-Policy is next:
    <wsp:Policy wsu:Id="WS-Policy-Siebel"
         xmlns:sp="http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702"
         xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy"
         xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
         <wssp:Identity
              xmlns:wssp="http://www.bea.com/wls90/security/policy">
              <wssp:SupportedTokens>
                   <wssp:SecurityToken
                        TokenType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#UsernameToken">
                        <wssp:UsePassword
                             Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText" />
                   </wssp:SecurityToken>
              </wssp:SupportedTokens>
         </wssp:Identity>
    </wsp:Policy>
    Process WS-Security is setted to "yes".
    While debugging I see that all works fine - I can authenticate with defined credentials and breakpoints in proxy service flow works fine.
    But at the end I get the fault:
    Soap fault:
    <env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
    <env:Header/>
    <env:Body>
    <env:Fault>
    <faultcode>env:Server</faultcode>
    <faultstring>Unable to add security token for identity</faultstring>
    </env:Fault>
    </env:Body>
    </env:Envelope>
    In console:
    <09.06.2010 17:39:18 MSD> <Error> <OSB Security> <BEA-387023> <An error ocurred during web service security inbound response processing [error-code: F
    ault, message-id: 1721282272521583996--57dc4ccc.1291cc2282d.-7fab, proxy: OSB Project WS-Security/WSSecurityService, operation: NewOperation]
    --- Error message:
    <env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"><env:Header/><env:Body><env:Fault><faultcode>env:Server</faultcode><faultstring>Un
    able to add security token for identity</faultstring></env:Fault></env:Body></env:Envelope>
    weblogic.xml.crypto.wss.WSSecurityException: Unable to add security token for identity
    at weblogic.wsee.security.wss.SecurityPolicyDriver.processIdentity(SecurityPolicyDriver.java:175)
    at weblogic.wsee.security.wss.SecurityPolicyDriver.processOutbound(SecurityPolicyDriver.java:73)
    at weblogic.wsee.security.wss.SecurityPolicyDriver.processOutbound(SecurityPolicyDriver.java:64)
    at weblogic.wsee.security.WssServerHandler.processOutbound(WssServerHandler.java:88)
    at weblogic.wsee.security.WssServerHandler.processResponse(WssServerHandler.java:70)
    Truncated. see log file for complete stacktrace
    Incoming soap message is:
    <soapenv:Envelope      xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
    <soap:Header      xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
    <wsse:Security      soap:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
    <wsse:UsernameToken      wsu:Id="unt_TNNp0cBwU7HyPKoq" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
    <wsse:Username>testuser</wsse:Username>
    <wsse:Password      Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">testuser</wsse:Password>
    </wsse:UsernameToken>
    </wsse:Security>
    </soap:Header>
    <soapenv:Body>
    <wss:NewOperation      xmlns:wss="http://www.troika.ru/Enterprise/WSSecurityService/">
    <in>string</in>
    </wss:NewOperation>
    </soapenv:Body>
    </soapenv:Envelope>
    Edited by: Andrey L. on Jun 9, 2010 5:55 PM

    I thought you were getting that exception when accessing the proxy.
    No. Authentification works fine. Proxy body works fine. But at the end of proxy appears the exception.
    Sorry for my english - I tried to show this situation on image: http://imglink.ru/show-image.php?id=9c0e0c1719f00289faf11696c6703bc3
    Are you getting this exception when routing to a business service which is configured for WS-Security ??
    I don't use business service in this test project - only simple proxy service with all logic inside.
    PS transformation in replace action is very simple too:
    (:: pragma bea:global-element-parameter parameter="$newOperation1" element="ns0:NewOperation" location="WSSecurityService.wsdl" ::)
    (:: pragma bea:global-element-return element="ns0:NewOperationResponse" location="WSSecurityService.wsdl" ::)
    declare namespace ns0 = "http://www.troika.ru/Enterprise/WSSecurityService/";
    declare namespace xf = "http://tempuri.org/OSB%20Project%20WS-Security/Hello/";
    declare function xf:Hello($newOperation1 as element(ns0:NewOperation))
    as element(ns0:NewOperationResponse) {
    <ns0:NewOperationResponse>
    <out>Hello, { data($newOperation1/in) }!</out>
    </ns0:NewOperationResponse>
    declare variable $newOperation1 as element(ns0:NewOperation) external;
    xf:Hello($newOperation1)
    Edited by: Andrey L. on Jun 10, 2010 12:21 PM

  • I'm unable to add the email address for iMessage, that I was using before iOS 7 to my iPhone, because it says that it is "in use by another device," but I have no other devices.  How do I resolve this so I can add this email address to my iPhone?

    I'm unable to add the email address for iMessage, that I was using before iOS 7 to my iPhone, because it says that it is "in use by another device," but I have no other devices.  How do I resolve this so I can add this email address to my iPhone to send and recieve iMessages?

    Sync your iPhone to iTunes, and see if that does the trick.  Also you could try a Soft Reset with no Risk to Data.  Holding down both the Sleep button and the Home button until the Apple logo appears and then waiting for the Reset to bring you iPhone back to the lock screen.    Are you trying to add the email at Settings>Messages>Send and Receive from (2 Addresses) your iPhone number and your email address?

  • Ever since my last update I have been unable to add songs from my i tunes library onto my i phone.  The "add to" button does not appear for me when I connect my i phone.  Can anyone shed some light on this for me?

    Ever since my last update I have been unable to add songs from my i tunes library onto my i phone.  The "add to" button does not appear for me when I connect my i phone.  Can anyone shed some light on this for me?

    Thanks for that 'sberman' - because my iPhone is backed-up to my work computer (only at this stage) I have had to call our IT Department in Adleaide. (4 times this morning). The last guy managed to get the phone into 'DFU Mode' - no more recovery mode screen - (kind of 'asleep' perhaps) from my understanding of same. I am awaiting a call again from IT so they can get my computer to actually recognise my iPhone on the C Drive. This also happened to  one of my colleagues in Newman (WA). She got so frustrated with the whole process that she bought another phone the next time she was in 'civilisation.' She hasn't had any problems since. (Cross fingers).
    Thanks again, Sandra2474.

  • Unable to add security token for identity

    Hi all,
    I am trying to implement a web service with username token authentication. I have defined the ws -policies in the wsdl, and checked the Process Security Header checkbox in the proxy configuration. But when I invoke the proxy through test console and pass the full soap envelope , I am getting an "Unable to add security token for identity" error
    This is how the soap header looks from the request document part of the test console:
         <soap:Header>
         <wsse:Security>
         <wsse:UsernameToken>
         <wsse:Username>xxxxx</wsse:Username>
         <wsse:Password      Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">yyyyyy</wsse:Password>
         </wsse:UsernameToken>
         </wsse:Security>
         </soap:Header>
         <soap:Body>
    I have configured the user at alsb security configuration and added an acces policy stating that the proxy can be accessed only by user "xxxx"
    Please help
    -Atheek

    Mostafa ,
    This points to a misconfiguration of your security. Possible causes are:
    * There is not a valid RSA key to sign the SAML token with.
    * The SAML CredentialMapper is missing
    * There is no Relying Party (rp) configured for SAML Credential Mapper that matches your producer
    * The producer is using User Name Token and you have no configured the DefaultCredentialMapper to allow for UserNameToken.
    Good Luck,
    Nate
    Edited by: user650654 on Sep 9, 2008 4:31 AM

  • Exception: Unable to add security token for identity

    Hi Friends,
    I was trying to add SAML tokens(Sender-Voucher Profile) to my web services. I configured WLS and ALSB with all Authentication settings but I get a SOAPFaultException when i run the client.
    javax.xml.rpc.soap.SOAPFaultException: Unable to add security token for identity
    I tried the following samples:
    https://codesamples.projects.dev2dev.bea.com/servlets/Scarab/remcurreport/true/template/ViewIssue.vm/id/S10/eventsubmit_dosetissueview/foo/resultpos/-1/nbrresults/0/action/ViewIssue/tab/2/readonly/false
    https://codesamples.projects.dev2dev.bea.com/servlets/Scarab/remcurreport/true/template/ViewIssue.vm/id/S203/nbrresults/39
    Is there any configuration on WLS that needs to be verified when we get this Exception "Unable to add security token for identity"??
    Any help is appreciated in this regard.
    Thanks,
    Kiran

    Hello Kiran,
    Is this problem resolved?. I am facing the same problem when i was trying to call a service .
    The exception i got is as follows:
    (D-113003875) server (IBwlpAdminServer) Method (com.zurich.ep.global.produc
    metadata.impl.ProductMetaDataServiceImpl.getAllProducts:234) ==> Host (D-113003
    75) server (IBwlpAdminServer) Method (com.zurich.ep.service.delegate.AbstractEx
    eptionHandler.logException:67)
    om.zurich.ep.exception.ServiceFailureException: SOAPFaultException - FaultCode
    {http://schemas.xmlsoap.org/soap/envelope/}Server] FaultString [Unable to add s
    curity token for identity] FaultActor [null]No Detail; nested exception is:
    javax.xml.rpc.soap.SOAPFaultException: Unable to add security token for
    dentity
    at com.zurich.ep.global.productmetadata.impl.ProductMetaDataServiceImpl.
    etAllProducts(ProductMetaDataServiceImpl.java:234)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
    ava:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
    orImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at com.zurich.ep.service.delegate.ServiceDelegateProxy.invoke(ServiceDel
    gateProxy.java:135)
    at $Proxy62.getAllProducts(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
    ava:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
    orImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at com.zurich.ep.service.delegate.ServiceAdapter.invoke(ServiceAdapter.j
    va:97)
    at $Proxy63.getAllProducts(Unknown Source)
    at com.zurich.ep.global.productmetadata.v20090601.ProductMetaDataService
    ortTypeImpl.getAllProducts(ProductMetaDataServicePortTypeImpl.java:119)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
    ava:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
    orImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at weblogic.wsee.component.pojo.JavaClassComponent.invoke(JavaClassCompo
    ent.java:99)
    at weblogic.wsee.ws.dispatch.server.ComponentHandler.handleRequest(Compo
    entHandler.java:64)
    at weblogic.wsee.handler.HandlerIterator.handleRequest(HandlerIterator.j
    va:127)
    at weblogic.wsee.ws.dispatch.server.ServerDispatcher.dispatch(ServerDisp
    tcher.java:85)
    at weblogic.wsee.ws.WsSkel.invoke(WsSkel.java:80)
    at weblogic.wsee.server.servlet.SoapProcessor.handlePost(SoapProcessor.j
    va:66)
    at weblogic.wsee.server.servlet.SoapProcessor.process(SoapProcessor.java
    44)
    at weblogic.wsee.server.servlet.BaseWSServlet$AuthorizedInvoke.run(BaseW
    Servlet.java:173)
    at weblogic.wsee.server.servlet.BaseWSServlet.service(BaseWSServlet.java
    92)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run
    StubSecurityHelper.java:223)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecuri
    yHelper.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.jav
    :283)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.jav
    :175)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActio
    .run(WebAppServletContext.java:3245)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
    Subject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:
    21)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppS
    rvletContext.java:2003)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletC
    ntext.java:1909)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.j
    va:1359)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
    aused by: java.rmi.RemoteException: SOAPFaultException - FaultCode [{http://sch
    mas.xmlsoap.org/soap/envelope/}Server] FaultString [Unable to add security toke
    for identity] FaultActor [null]No Detail; nested exception is:
    javax.xml.rpc.soap.SOAPFaultException: Unable to add security token for
    dentity
    at com.zurich.ep.service.delegate.AbstractExceptionHandler.logException(
    bstractExceptionHandler.java:67)
    at com.zurich.ep.service.delegate.client.WebServiceBusinessDelegate.invo
    e(WebServiceBusinessDelegate.java:260)
    at $Proxy61.getProductFunctionality(Unknown Source)
    at com.zurich.ep.global.productmetadata.impl.ProductMetaDataServiceImpl.
    etAllProducts(ProductMetaDataServiceImpl.java:201)
    ... 39 more
    aused by: javax.xml.rpc.soap.SOAPFaultException: Unable to add security token f
    r identity
    at weblogic.wsee.codec.soap11.SoapCodec.decodeFault(SoapCodec.java:265)
    at weblogic.wsee.ws.dispatch.client.CodecHandler.decodeFault(CodecHandle
    .java:106)
    at weblogic.wsee.ws.dispatch.client.CodecHandler.decode(CodecHandler.jav
    :91)
    at weblogic.wsee.ws.dispatch.client.CodecHandler.handleFault(CodecHandle
    .java:79)
    at weblogic.wsee.handler.HandlerIterator.handleFault(HandlerIterator.jav
    :254)
    at weblogic.wsee.handler.HandlerIterator.handleResponse(HandlerIterator.
    ava:224)
    at weblogic.wsee.ws.dispatch.client.ClientDispatcher.handleResponse(Clie
    tDispatcher.java:161)
    at weblogic.wsee.ws.dispatch.client.ClientDispatcher.dispatch(ClientDisp
    tcher.java:116)
    at weblogic.wsee.ws.WsStub.invoke(WsStub.java:89)
    at weblogic.wsee.jaxrpc.StubImpl._invoke(StubImpl.java:335)
    at com.zurich.ep.global.chassisauthorisation.v20090601.ChassisAuthorisat
    onServicePortType_Stub.getProductFunctionality(ChassisAuthorisationServicePortT
    pe_Stub.java:145)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
    ava:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
    orImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at com.zurich.ep.service.delegate.client.WebServiceBusinessDelegate.invo
    e(WebServiceBusinessDelegate.java:225)
    ... 41 more
    aused by: weblogic.xml.crypto.wss.WSSecurityException: Unable to add security t
    ken for identity
    at weblogic.wsee.security.wss.SecurityPolicyDriver.processIdentity(Secur
    tyPolicyDriver.java:175)
    at weblogic.wsee.security.wss.SecurityPolicyDriver.processOutbound(Secur
    tyPolicyDriver.java:73)
    at weblogic.wsee.security.WssClientHandler.processOutbound(WssClientHand
    er.java:69)
    at weblogic.wsee.security.WssClientHandler.processRequest(WssClientHandl
    r.java:53)
    at weblogic.wsee.security.WssHandler.handleRequest(WssHandler.java:72)
    at weblogic.wsee.handler.HandlerIterator.handleRequest(HandlerIterator.j
    va:127)
    at weblogic.wsee.handler.HandlerIterator.handleRequest(HandlerIterator.j
    va:100)
    at weblogic.wsee.ws.dispatch.client.ClientDispatcher.dispatch(ClientDisp
    tcher.java:101)
    ... 49 more
    Thanks,
    JK

  • Unable to add POP Account for Outlook 2011 for Mac.

    Hi, I have bought the Outlook 2011 for Mac recently, but I am unable to add an account for my email
    Here is what I did:
    Tools > Accounts> (a window pops out) > click "Email Account" and the thing just froze.
    Tried restarting and reinstalling.. but does not work.
    However, when I tried clicking  "Exchange account" a window requesting email information slides down, which is what I need to setup my POP account!!!

    Hi, I have bought the Outlook 2011 for Mac recently, but I am unable to add an account for my email
    This forum is for Windows based Outlook. Suggest you post the question to the Mac based Outlook forum for quicker/relevant responses to your question
    Office for Mac (Outlook)
    http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macoutlook?sort=lastreplydate&dir=desc&tab=Threads&status=&mod=&modAge=&advFil=&postedAfter=&postedBefore=&threadType=All&tm=1416101390880
    Karl Timmermans [Outlook MVP] "Outlook Contact Import/Export/Data Mgmt" http://www.contactgenie.com

  • In which add-family,routing policy should apply for MPBGP ?

    Hi,
    IN MPBGP protocol, where i will apply routing policy to apply  as- path prepand    so that Route  would be secondary to  neighbor.
    IGP-OSPF and BGP over MPLS is running.
    on Which  address-familiy nbr,should i apply, is it in VPNV4 or IPV4 or IPV4  VRF ?
    if i want 10.36.128.0/26 prefix should go to Neigbhor MPLS R2, what should i use access-list or Prefix list?
    please provide the reply with its config .
    Topology like
    regards,
    Ajay

    Hi Harlold,
    Thanks for reply...
    Please find the topology diagram
    1. Yes ,both are MPLS Network.
    2. L3VPN intraAS.
    3.Mpls router 1 and 2  are PE to connect the SPs MPLS rtr.
    4.My administration is upto Router R1.
    5.Both MPLS Router R1 and R2 belongs to other Vendor which giving us mpls service . and they want from to advertise only VRF MGMT subnets only with AS Prepend .
    So i want to where should Route-map apply? is it in address-family vpnv4 or ?
    router bgp 64513
      synchronization disable
      neighbor 10.49.5.230 remote-as 64513
      neighbor 10.49.5.230 update-source loopback1
    address-family vpnv4
        neighbor 10.49.5.230 activate
        neighbor 10.49.5.230 send-community both
        neighbor 10.49.5.230 route-map ONM_TO_AIR
    Route-map ONM_TO_AIR
    match ip add prefix-list ONM_TO_AIR
    set as-path prepend 64513  64513 64513 64513.
    ip prefix-list ONM_TO_AIR permit 10.49.30.128/26
    will it work?
    or I have to match extcommuntity in Route-map   as it apply to vpnv4 add-family ?
    Regards,
    Ajay

  • Unable to add or delate city in today view for time or weather

    I am unable to add or delete a new location or city in the today view for either the weather or world time.  I have clicked on the "i" and it then prompts me to click on the "+" circle for world time, however, when I attempt to click on the "+" I get no response.  Any suggestions on what I may be doing wrong?

    Hello cfbnc,
    Thank you for using Apple Support Communities. 
    It doesn't sound like you are doing anything wrong. But I have a couple of suggestions for you to try. First force quit the Time and Weather apps. See this article:
    Force an app to close in iOS - Apple Support
    If it still isn't working, I would again force quit the apps and then reset the iPhone. See this article:
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    Cheers,
    Jeff D. 

  • Maps 3.09 unable to add NEW location for check-in

    3.09 no longer support Checkin, I re-flashed my phone and I totaly lost Checkin :-(

    I just found this link, saying add place feature in Nokia Map may disabled in some country, what are the countries which had been disabled to use add place feature?
    Anyone know does add place feature in Nokia Map was disable in Malaysia? If yes, why disables it? It's useless for check in if this add place featue is disabled, you cant even add a new place if your check in place not found in the list.
    Anyone has clue for this?
    If you find this post helpful, please show your appreciation by clicking the Kudos star at the left. If it provides you the solution, please click on the GREEN Accept as Solution button at below

  • "New" update for CIFS made me unable to add share

    Hi,
    yesterday I updated one of my servers to latest updates (its OES2 SP3 32bit). I have a script there to add CIFS shares on-demand with "novcifs". In old version, everything worked fine, but from yesterday, Im unable to add cifs share with path longer than 75 characters (strange number for me). With iManager, Im able to add that share without any problem, but thats actualy not a solution for me.
    Can you help me with that? I didnt found a thing about this issue.
    novcifs -sap long_path -n sharename -m 0 -c "sharecomment"
    Failed to add share
    Invalid path name. Path name must not exceed 75 characters long
    Thanks for any help

    Lukas,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

Maybe you are looking for

  • IMAP email not appearing in Mail

    Background: I have an IMAP email account that's over a decade old.  It's going away soon so I'm trying to figure out how to get a complete local copy of all that email.  There are a total of around 100 folders with anywhere from 5 to over 2000 emails

  • Cant get cd track info. Please Help.

    I'm connected to the internet and everything....I click on get cd track names.... and it says CDDB or whatever doesn't have the album info. For a very popular album.... Flo-Rida's R.O.O.T.S. Please Help.

  • Stms and scc5 error on table glpca

    We will PRD data STMS to DEV new CLIENT error, the log as follows : 日志文件:                F:\usr\sap\trans\log\TPDIT00026.TOD  - 主要的输入                                                                                传送需求__:TPDKT00026                    

  • Redirecting Fault Response to JMS queue

    Hi Everyone, We have a proxy which will pole the request from RequestQueue and call a proxy service(backend) and wait for the response from the proxy service(backend). Once we get the response, it has to put the response to the ResponseQueue. Request

  • R3AD_CUSTOME and R3AD_SAL_ERR* are sysfail

    Hi Expert, SMQ2 --> R3AD_CUSTOME and R3AD_SAL_ERR* are sysfail in CRM2007 system. Status Text is displayed "Update BDoc status failed - BDoc not found" I deleted all queue in SMQ2 but recreate continuously. there are entries 987 now and then increase