For the apex-team : bug in apex ???

Hi apex-team,
if i make a master-detail report i can choose between a result of two pages (master and detailmaster with mru for the detail) , or a result with three pages (master, detailmaster with a report of detailtabel and a form for the detail-table.
apex creates in both cases but in the second situation (three pages) on the third page it's impossible to add a detail. (in the result with two pages everything works fine).
both apex verson 2.2 and version 3.
just to inform you.
regards!
Leo

Leo:
That is a good point. The home page is using a derived column, and the HTML Expression for the column formatting. That must escape the HTML.
I think the fix for a future release would be to not use that derived column, and just use a standard report with a custom template. It is also possible that for announcements and tasks it is more appropriate to use a standard Textarea instead of Textarea with HTML Editor.
Thanks for your feedback,
Jason

Similar Messages

Bootcamp Version 3.1 --List of bug reports for the Development Team to fix.

Please create a list of bug fixes for the Development Team to address in the next version of Bootcamp (e.g., 3.2). This thread assumes that all users are presently running Bootcamp 3.1:
1. Sound should not be muted every time a user reboots a newer MacBook laptop using Windows 7 Ultimate, 64-bit. My sound is always muted when I load Windows 7 Ultimate, and I have to manually turn it on each time.
2. Left and right clicks on the trackpad should work out of the box using Windows 7 Ultimate, 64-bit. My left click operates a little less than 50 percent of the time -- i.e., I click it and nothing happens. I had to switch to "tap to click" as a workaround, however, I prefer the good old solid left click.
Please step right up and add to the bug report list so that the developers have a checklist of issues that need to be fixed. When the bug report list has grown to a respectable size, I'll send an official letter to the C.E.O. to facilitate the bug reports reaching the development team.
Message was edited by: lawlist

lawlist wrote:
Please create a list of bug fixes for the Development Team to address in the next version of Bootcamp (e.g., 3.2). This thread assumes that all users are presently running Bootcamp 3.1:
1. Sound should not be muted every time a user reboots a newer MacBook laptop using Windows 7 Ultimate, 64-bit. My sound is always muted when I load Windows 7 Ultimate, and I have to manually turn it on each time.
2. Left and right clicks on the trackpad should work out of the box using Windows 7 Ultimate, 64-bit. My left click operates a little less than 50 percent of the time -- i.e., I click it and nothing happens. I had to switch to "tap to click" as a workaround, however, I prefer the good old solid left click.
Please step right up and add to the bug report list so that the developers have a checklist of issues that need to be fixed. When the bug report list has grown to a respectable size, I'll send an official letter to the C.E.O. to facilitate the bug reports reaching the development team.
Message was edited by: lawlist
FWIW, I don't have the symptoms you describe. So I think before you call a symptom a "bug" I think you should confirm that it is indeed a "bug" and not a configuration, software, or hardware issue caused by something such as incorrect installation, incorrect setup, or any other third party or user caused action.
Also, FWIW, I don't think this forum is intended to be used as a survey for gathering "bugs". Apple has an official feedback page where they gather user experiences such as yours. I think if you post your "bugs" there they will get faster attention than posting them here in this user-to-user help forum.

[svn] 1053: Basic and custom security-constraint samples were added to the team app mainly for the doc team to have a reference .

Revision: 1053
Author: [email protected]
Date: 2008-04-01 11:35:28 -0700 (Tue, 01 Apr 2008)
Log Message:
Basic and custom security-constraint samples were added to the team app mainly for the doc team to have a reference. The custom authentication sample uses the new ChannelSet.login and ChannelSet.logout methods.
Modified Paths:
blazeds/branches/3.0.x/apps/team/WEB-INF/flex/remoting-config.xml
blazeds/branches/3.0.x/apps/team/WEB-INF/flex/services-config.xml
Added Paths:
blazeds/branches/3.0.x/apps/team/features/security-constraints/
blazeds/branches/3.0.x/apps/team/features/security-constraints/README.txt
blazeds/branches/3.0.x/apps/team/features/security-constraints/securityConstraint_Basic.m xml
blazeds/branches/3.0.x/apps/team/features/security-constraints/securityConstraint_Custom. mxml
Removed Paths:
blazeds/branches/3.0.x/apps/team/features/remoting/remoting_AMF_SecurityConstraint_Basic. mxml

Congrats to Carmelo!
Windows Phone and Windows Store Apps Technical Guru - February 2015
Carmelo La Monica
Windows Phone 8: control Nokia Maps (Part 3)
JH: "Part 3 of the series how to work with the Nokia maps control. As the previous articles this one contains a lot of code snippets and some pictures. Good work!"
Ed Price: "A great topic, a fantastic breakdown of sections with clear descriptions, and a nice mix of code formatting and helpful images! Another stellar article from Carmelo! Great job including the link back at the end to the portal
article!"
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

HT201303 Do any of you apple geniuses out there know how to retrieve the answers to your security questions or at least reset them? Apparently its to much for the support team. Can't get an answer out of them...

Do any of you apple geniuses out there know how to retrieve the answers to your security questions or at least reset them? Apparently its to much for the support team. Can't get an answer out of them...

Reset Security Questions
Frequently asked questions about Apple ID
Manage My Apple ID
Or you can email iTunes Support at iTunes Store Support.
If all else fails:
Go to: Apple Express Lane;
Under Product Categories choose iTunes;
Then choose iTunes Store;
Then choose Account Management;
Press Continue;
Now choose iTunes Store Security and answer the bullet questions, then click Continue;
Sign in with your Apple ID and press Continue;
Under Contact Options fill out the information and advise iTunes that you would like your security/challenge questions reset;
Click Send.
You should get a response within 24 hours by email.
Presently there appears to be problems on Apple's end, so it may be quite some time before they respond.
Another user posted the following:
I got some help from an apple assistant on the phone.
It is kind of round about way to get in
Here is what he said to do and it is working for me...
1) on the device that is asking you for the security questions go to "settings", > "store" > tap the Apple ID and choose view"Apple ID" and sign in.
2) Tap on payment information and add a credit/debit card of your preference then select "done", in the upper right corner
3) sign out and back into iTunes on the device by going to "settings"> "store" > tap the Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you should be asked to verify your security code for the credit /debit card and NOT the security questions.
4) At this time you can remove the card by going back in to edit the payment info and selecting "none" as the card type then saving the changes by selecting "done". You should now be able to use your iTunes store credit without answering the security questions.
It's working for me ...I just have to put in my 3 digit security pin from the credit card I am using.
Good Luck friends!

I urgently need a contact email for the sales team can anybody help me with this

I urgently need a contact email for the sales team regarding an outstanding query, can anybody help me with this please? Thanks in advance.

Hello
Welcome to the EE Community! I'm afraid there isn't an e-mail you can contact the EE Mobile Sales team on, but here's how you can get in touch with them:
If you're on Twitter, you can tweet them @EE, however If you'd prefer to talk to someone, you can dial:
150 from your EE mobile phone
If you're ringing from another phone, it's 01707 315000
For handy text codes & more, check out this page: http://ee.co.uk/help/get-in-touch Cheers,
Titanium
Was my post helpful? Please take 2 seconds to hit the 'Kudos' button below

Anybody found a fix for the netstream.seek bug?

The bug I am talking about is only being able to seek to a point in a video that the play head has been before.
Here is how the bug is described at :http://www.brooksandrus.com/blog/2005/12/17/5-reasons-netstream-sucks/
"Seeking is super slow until all keyframes are cached. No bull, if you have a file which you’ve completely preloaded, the keyframes aren’t cached until the video playhead reaches that point in time for the first time. If I load a file and seek to the end, the player has to chug through all of the keyframes prior to my seek point. This is slow, slow if I have video of even several minutes."
That was posted 5 years ago. I have found the bug referenced in the following posts:
http://forums.adobe.com/message/1917914#1917914
http://forums.adobe.com/message/692394?tstart=0
I would assume that since this bug has been around for at least 5 years, there would a bug report filed for it or a work around found. But I can't seem to find either.
I have tried multiple codecs and encodings with no luck. I'm having a hard time accepting that there is not fix for this problem. Flash has to read and cache the key frame information of the entire video before being able to seek to the end. Does anybody know where the flash player writes this information? Let me be clear, this is not streaming video, this is video that is running local off the hard drive. The flash player stores this key frame information somewhere until the computer is restarted. At that point when the video is played again, it has to read the entire file again. You can close and open the player multiple times and it will only perform the caching the first time and not again until a computer restart.
again, I am not trying to seek to a point that has not been loaded yet. This is a swf that loads a video off the hard drive.
One that that I have noticed is that when H.264 files are loaded, the player immediately performs the caching scan before it begins to play. When it is finished, you can seek to any point quickly. The time it takes for the caching scan is dependent upon the size of the file and the number of keyframes it has. Whereas the rest of the video codecs will play immediately but will only seek quickly to cached keyframes.
I have only seen this problem discussed in a few spots, with no solutions. it is a very old bug. Has anybody found a fix, work around or bug report on it?
Thanks for your help
-Mike

package {
    import flash.display.Sprite;
    import flash.events.NetStatusEvent;
    import flash.events.SecurityErrorEvent;
    import flash.events.TimerEvent;
    import flash.media.Video;
    import flash.net.NetConnection;
    import flash.net.NetStream;
    import flash.text.TextField;
    import flash.utils.Timer;
    import flash.utils.getTimer;
     [SWF(width="400", height="600", backgroundColor="#FFFFFF")]
     public class SeekTest extends Sprite
          private var videoURL:String = "test.flv";
        private var connection:NetConnection;
        private var stream:NetStream;
          private var tick:Timer;
          private var startTime:int;
          private var skipCount:int;
          private var duration:Number;
          private var txt:TextField;
          public function SeekTest()
               txt = new TextField();
               txt.wordWrap = true;
               txt.height = 300;
               txt.width = 400;
               addChild(txt);
               tick = new Timer(0.1);
               tick.addEventListener(TimerEvent.TIMER, checkLoad);
               connection = new NetConnection();
            connection.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler);
            connection.addEventListener(SecurityErrorEvent.SECURITY_ERROR, securityErrorHandler);
            connection.connect(null);
          private function netStatusHandler(event:NetStatusEvent):void {
                //print("Net Status:", event.info.code);
            switch (event.info.code) {
                case "NetConnection.Connect.Success":
                    connectStream();
                    break;
                case "NetStream.Play.StreamNotFound":
                    print("Stream not found: " + videoURL);
                    break;
                    case "NetStream.Seek.Notify":
                         print("--- Seek Completed in", (flash.utils.getTimer() - startTime)/1000, "seconds.");
                         seekDone();
                         break;
        private function securityErrorHandler(event:SecurityErrorEvent):void {
            print("securityErrorHandler: " + event);
        private function connectStream():void {
            stream = new NetStream(connection);
            stream.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler);
            var metaOb:Object = new Object;
            metaOb.onMetaData = metadata;
            stream.client = metaOb;
            var video:Video = new Video();
                video.height = 300;
               video.width = 400;
               video.y = 300;
            video.attachNetStream(stream);
            startTime = flash.utils.getTimer();
            stream.play(videoURL);
            addChild(video);
            tick.start();
        public function metadata(info:Object):void
             duration = info.duration;
             print("Metadata: duration=" + info.duration + " width=" + info.width + " height=" + info.height + " framerate=" + info.framerate);
          private function checkLoad(e:TimerEvent):void
               var seconds:Number = (flash.utils.getTimer() - startTime) / 1000
               if(stream.bytesLoaded == stream.bytesTotal && stream.bytesTotal != 0 && seconds > 3)
                    skipCount = 0;
                    print("Video 100% Loaded. Performing first seek after 3 seconds of video playing.");
                    tick.stop();
                    startTime = flash.utils.getTimer();
                    stream.seek(duration - 2);
          private function seekDone():void
               if(skipCount == 0)
                    //just skipped to the end of the video the first time
                    //jump back to the begining and do it again.
                    startTime = flash.utils.getTimer();
                    print("Seeking back to the begining to time the second seek to the end.")
                    stream.seek(0);
               }else if(skipCount == 1)
                    startTime = flash.utils.getTimer();
                    print("Second seek to the end. ")
                    stream.seek(duration - 2);
               skipCount++;
          private function print(... args):void
               trace(args)
               txt.appendText(String(args.join(" ")) + "\n\n");
The above is a simple test I put together. Use a large FLV for the testing. Remember, the first seek to the end will be the longest and you may not get the same results unless you restart or use another FLV.

Authorization objet for the support team and message processer

Hi,
Is it possible to ristict access to the message processers for the field support team and message processer in crm_dno_monitor. Iwant to restrickt message processer should only change message processer field .
Regards
S.Manu

Hi manu,
in BADI ORDER_SAVE, Method PREPARE you can check for changes of ticket values and cancel the save process.
So you could check if the user is in partner function "message processor" and has changed the value in partner function "support team". If so, you could cancel the process, the change will not be saved and the user gets an error message!
Hope this helps,
Christoph
Edited by: Christoph Kronauer on Apr 1, 2010 10:20 AM

A question for the Muse team

With all the talk about the biblical slowness of Adobe Muse.... yes, even the very latest and most up to date version as of todays date.... and the fact that so many people are complaining, I would like to ask the development team exactly what computer specs you guys are using and what type of websites, number of pages etc you created in order to test the product.
I am a Mac user so it would be helpful to tell me the spec YOU are using instead of constantly asking disgruntled users who live in the real world with computer specs for their .muse files to be sent in.
You guys must have spent months developing this product so you MUST have seen the incredible lag or the need to force quit regularly upon the ever present spinning beach ball. Can you tell us what other application you open to use with the product... I for instance now am unable to open my Lightroom 5 app to adjust any images as, as soon as I do so, Muse starts to sulk big time and just gives in... Also if I use nothing else and just Muse, after an hour it decides its had enough of the hard work and suffers from accelerated decrepitude.
So what specs do you use and I will go out and buy it...

To add to the above... the Adobe Muse CC software has also started to to turn my iMac into an old grandfather... after about 10 minutes of use, adding some text and some photos, my whole computer slows down to a halt... dragging a website page just a few inches to the left lags for about 10 seconds, typing text starts to slow down. putting your mouse over items on the toolbar takes 5 seconds or so for the drop down menus to appear... etc... etc.... etc.... etc...
... and as usual I am unable to shut Muse down and have to force quit... I have tested every other programe and non of them affect my iMac like this so it really is Muse...
I dont know why you want to kill my iMac as I quite like it and its only a year old. Would be so nice if you could produce a stable version as I received notice from all the other pieces of software I have saying that they dont like working alongside Muse and want to move to a new computer.

Hurrah for the software team!

Hurrah for the OviSuite software team! I fought with the early PCSuites years ago. I fought with the last few Ovi Suite renditions until I gave up in frustration. The new Ovi Suite installed smoothly -and- worked immediately. I can synch and backup and view.
The MTP USB driver for the 5230 is still not installing in Windows 7, but I am functional.
Thanks, really,
ceemes

Hi darrella,
Is there a particular error message when you try to convert? If you get the generic "Conversion failure" message after both attempts, your assumption is likely correct. But, there are also specific types of the PDF files that ExportPDF doesn't support for conversion, such as those that are password-protected or part of a PDF portfolio. That said, if the spreadsheet is large, it could very well be too complex.
Please clear the browser cache, and then try again. If that doesn't work, you might want to try converting via Adobe Acrobat--since the conversion will take place locally, you won't run into any upload speed or connectivity issues which could affect the conversion. If you don't have Acrobat, you're welcome to try it for free for 30 days. You can download a 30-day trial from http://www.adobe.com/products/acrobat.html.
Best,
Sara

Suggestion for the PlayBook Team

There have been suggestions made and issues identified with the PlayBook on this and other forums. Many of these are understandable with the initial release of a totally new product, new OS, and very limited development time.
My issue is more fundamental: What is the PlayBook supposed to be?
   1) Business Tool?
   2) Entertainment Device?
   3) Smartphone Extension/Enhancement?
It appears that PlayBook is trying to be "all of the above, to all people, and master of none"
The PlayBook was to be my business tool. Unfortunately it currently fails to meet my minimum business requirements. The functionality for the two other uses seems to be limited as well.
It would be helpful if the PlayBook Team conveyed the primary purpose of the PlayBook; and, concentrated development in that direction. This would provide a realistic expectations as to the future use of my PlayBook.

What is wrong with all of the above?
What's the focus of the iPad, Xoom and Tab?
I do believe you'll see it fulfill all three as apps develop and time passes. Obviously right now it's not serving your needs.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

O8EE-WAS302 A question for the Oracle Team

I have installed O8EE and attempt to install WAS 302. It does
not give any mistake upon installing but when I execute owsctl
start www, says that it does not find the file libndwzp.so, the
directory where is found this file is in LD_LIBRARY_PATH
variable, and computer it is hung. As curious thing is that
permits me to execute owsctl start wrb and owsctl start admin,
and with the browser can use the administration pages. Before I
have installed O8+WAS302 and was operating. Some idea? It is
incompatible the version EE with WAS?
null

Mladen,
With all due respect, Oracle is providing their software free for evaluation (otherwise playing around at home and letting companies play with it for 30 days to show how it womps on MS SQL et al.) purposes only. Their product is a commercial product and asking you to join OTN to download it, helps them enforce that individuals are using it for only these purposes. Allowing anonymous access means that they have no idea of where there software is going and what it is being used for. I dont know if you have priced out Oracle but if you have, I think you would come to the conclusion that it is a tad expensive to purchase, just for learning and throwing it on a resume. They are asking that you be accountable and responsible for upholding your end of the agreement and not using it in manners other than specified. I think that is a reasonable request for access to software of this caliber. You do not see MS giving away Dev Studio or MS SQL for the price of a little user information now do you.
null

Is there a workaround for the transform/crop bug?

Happy Tuesday!
Does anyone know a way to get around this bug?
- I have two video clips.
- One video clip (on top) is a talking head that need to be placed in a box on the other clip.
- Apply transform to talking head clip. Scale and change position.
- Apply crop to talking head clip. Bring in left and right so image fits in the box.
Everything is good so far...
- Apply same transform and crop to other talking head clips in same project.
- Crop fails terribly for second and all subsequent attempts. It seems like there is a magic area for which the clip cannot render.
The first transform/crop works fine...
All subsequent transform/crops, either mannually applied or from copied attributes, do this: (The collection of icons are inside the box and is showing through from the bottom clip.)
If I drag the image around the screen, there seems to be a "magic area." If the image is in the magic area, everything is fine. If the image approached any edge of the screen, the bad crop effect happens. Here I have dragged the transform near the bottom left corner of the screen:
I have played with crop settings and the way the crop jumps, there seems to be some kind of logic bug in the cropping code, particularly with transform/crop combinations. Any help would be appreciated! This bug is a show-stopper, and I'm on a fairly tight schedule. Does anyone know of a way to get around this bug?
Tom

I guess, I'm of no help here.. I can crop and transform like crazy - no issues
I also tried your 'special' method, to crop/transform the main storyline (=what I wouldn't do) ... but the attached other clips appear without problems:
and after that 'arrangement', another one - no issues:
tsphillips wrote:
… Perhaps an interesting experiment would be to see what it takes to make a clip render outside of it's crop box.
here you lost me - in translation, sorry:
a clip OUTside its crop??
outside a crop is nothing, that's what a crop is for… shouldn't it?
cropping means; cutting-off parts of the pic, that icon is a passépartout..
so, outside a crop is … nothing to see here, Sir..
Sorry, of being no help here......
Would be interesting, what Cupertino will andswer you..........

Where is the "quick fix" for the "insuffient data" bug in 9.5.2?

Adobe alludes to a quick fix for this acknowledged but says contact a support team to request it.
Please consider this a request that the fix be PUBLISHED for all.
Thank you.

Acrobat engineering would like to inform users facing this issue that the latest Reader XI release (available for download from http://get.adobe.com/reader) fixes this problem. Users are requested to download the latest version at the earliest to avoid encountering this error going forward. As mentioned earlier, the team is working actively towards fixing the problem in earlier versions (10.x and 9.x) as well and expects to deliver a solution by Q1 2013. For more details, you may refer to the blog post here

Any simple workaround for the 'umount -a' bug?

On Arch 0.7.2 the installer seems to use a busybox version that has a bug (according to what I've read) or maybe busybox isn't built with the umount -a feature.
The thing is that 'umount -a' doesn't work so, after installation, the partitions aren't umounted which results in FS errors on the next boot.
As I'm developing an automated installation I don't use ArchLinux installation scripts but I stumble into this problem.
Anyone can think of a simple shell snippet to umount all mounted filesystems?
Something like a loop would do, but I can't think of anything simple.
Maybe I can even use an updated ramdisk or update/patch busybox on the 0.7.2 initrd.

detto wrote:dunno exactly whats the problem :S
all the time ive installed arch using ext3 as fs it does indeed a quick check during first boot but that always looks like wanted to me, and also is only maybe 3-4 secs long. what fs are u using in installation?
well that check is probably the result of the filesystem not being umount ed correctly. The problem is supposed to be a bug in 'busybox', the program that's behind all basic comands on the installation. If you try to do 'umount -a' it doesn't work (it should umount everything).
My filesystem of choice is reiserfs, and it does handle problems like this. But that's not the point. There's a bug that needs to be fixed.

Another use for the disable structure (Bug or Feature?)

Hi,
I always use a lot of dynamic VI's in my projects, and sometimes I need to
pass parameters to them. I use Set Value methods.
One problem is that when you build an executable, the application builder
(AB) removes the panels by default, and the Set Value method will fail... I
know you can change the AB settings, but I was getting tired of that (and
had some free time). I also know you can change the VI properties so AB
won't remove the front panel...
But I started looking for things that tells the AB not to remove the front
panel.
I found out that the FP won't be removed when the VI has an event structure.
And it turns out that this works even if you put the event structure in a
disable case!
I'm pretty sure this isn't supposed to happen. I'm not so sure if it's
usefull since it might change over versions (I use 8.5.1), but I thought I'd
share it anyway...
Regards,
Wiebe.

Just today I had a problem with a VI with a diagram disable structure that would compile but the FP of the executable was mallformed and cause the whole app to crash.
So I stay away from diagram disable structures in execution code.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

For the apex-team : bug in apex ???

Similar Messages

Maybe you are looking for