For the Attribute Movement type(BWA) we use Value " 201" and not "101" why?

Hello Experts,
We are in SRM 7.0 classic scenario,
For the Attribute Movement type(BWA) we use Value " 201" and not "101" and provide the Source syst(backend R/3)
Can you all plz help me understand what is the difference if use value "101" for the Attribute Movement type(BWA)
Also,can you all plz help me understand if we shd use value "101" or "201" for the Attribute Movement type(BWA) and under what scenario.
Any pointers will be highly appreciated.
Thanks & Regards,
RKS

Hi,
Movment type " 201 maintained for the Classic scenario only.
It is necessary to maintain the attribute if the default material group for a given user (or) sit is set to a backend logical system. The EBP system knows that if the user is set for backend procurement ,that there might be a possibility for a reservation to be generated therefore it checks to see that a value for this attribute is maintained. The BWA value should be defined for the as 201 preceeded by the logical system and a backslash.
101 should not be used. This isfor the Good receipt.
In the extended classic scenario when you do the confirmations in SRM the movement type 101 will be created in the
backend system (R/3 or ECC6.0)
Regards
Ganesh Kumar .G

Similar Messages

Inspection Lot creation for the 103 movement type

<<Don't ask for or offer points>>
Dear Experts,
we have the requirement of Creating the Inspection lot for the 103 movement type. we have done all the necessary settings for 103 movement type (in OMJJ and under the node Quality Management --> Quality Inspection -->Inspection Lot Creation -->Inspection for Goods Movements) but still I am unable to achieve the results. Same is happening for 105 movements.
Kindly let us know what settings need to be done in order to achieve the same.
Full points will be awarded for the reply
Regards.
Edited by: Matt on Sep 18, 2011 4:44 PM

Hi,
If you have activated two inspection types (eg 01, 0101) of same inspection lot origin (01), in material master you should have a preferred indicator set for the inspection type for which you want to be selected when you perform goods receipt.
This check box is available in the inspection type set up in the Material master.
Also check whether the post to inspection stock indicator is set for the material (in the inspection type), then only material will be posted to inspection stock.
Please confirm, what happens to the stock after making MIGO. check in MMBE and confirm
Go through the link and maintain the necessary settings. I think default settings for 01 type should work.
http://help.sap.com/saphelp_470/helpdata/en/2d/350e4d448c11d189420000e829fbbd/content.htm
Regards
Hari

Hello, sent me the email canceling my account creative cloud, and I did not cancel the account, I do not understand the reason for the cancellation was because term option than 1 year and not yet completed.

Hello, sent me the email canceling my account creative cloud, and I did not cancel the account, I do not understand the reason for the cancellation was because term option than 1 year and not yet completed.

There is payment related issue, I have send you a personal message, please respond as requested.
I shall raise a request to the digital river store from where it was purchased.
I am from the Customer care Team.
Regards
Rajshree

Using Ethernet only and not USB - why?

Hi,
I'm fairly new so please help if you can. Have ADSL cable modem and have had problems connecting to internet. Phoned my ISP helpline and they said to take out the USB lead from the modem which I have done and its all now working. Basic question but what is difference between ethernet and usb? If now only using ethernet will my speed or anything else be affected.
Thanks
Dee

Some Mac functions are reluctant to work well with USB.
The short answer to your question what is difference between ethernet and usb: These are two different methods for sending data from one device to another.
USB 1 is used for example, to connect the mac keyboard to the computer. It works fine, because high speeds are not needed. USB 2 claims much higher speeds, but they are seldom achieved in real life. Strictly speaking, USB is not a substitute for ethernet, since it is only used for very short connections, whereas ethernet can work over distances of many kilometres.
Ethernet comes in flavours as well; you will see terms like 10 B/T, 100 B/T etc. These describe the density of the data that can be carried. Since ethernet has been around since the very early days of computers, its use for communication is pretty much trouble free, and just about every ISP uses it and depends on it. To my knowledge, there no computer networks, where large amounts of data are moved around, that use anything but ethernet.
All of the above is an attempt to provide a simple answer! The crux is that you are better off using ethernet than USB for the connection between the Mac and the modem. I trust that will allay any concerns you have.

Cannot tap on icloud in the settings menu on iphone4 because its in grey and not black,why is this?

please can someone help me

set "setting" -> "general" -> "restrictions" to allow changes to accounts

Automatic TO Creation and Confirm for the 321 Mvt type

Hello Experts,
Like to know the customisation invovlved for automatic TO creation and confirmation for the 321 movement type in which QM is activated.
I have already activated in OMKZ as below
1.Automatic TO for 321 mvt ytpe
2.TO item to be confirmed immediately
3.Propose confirmation
Table T333 -AUTTA
          T333-SQUIT &
          T333-VQUIT is activated.
Please let me know any other settings to be performed
Regards
Krishna

Hello Experts,
I am trying to create the Automatic TO and TO confirmation for the mvt type 321.
I made the below settings
I have activated in OMKZ as below
1.Automatic TO for 321 mvt ytpe   -"A"
2.TO item to be confirmed immediately - tick mark
3.Propose confirmation   - tick mark
Table T333 -AUTTA
T333-SQUIT &
T333-VQUIT is activated.
I have activated in OMKX as below
Table T321-TBFKZ Immediate TO Creation with "A"
T321-TAFKZ TR creation with "X"
After doing the settings i am not able to see the Posting change number in the Material document created for the mvt type 321.
Please let me know how to create the Posting chnage notice for the material document and how to convert the Posting change notice to automatic TO and confirmation.
Thanks & Regards
Krishna
Edited by: Hariharan krishna on May 25, 2011 8:01 AM

GL assignment to the new movement type copied from101(GR of purchase order)

Dear friends,
user need another movement type copied from 101 due to diffierent GL assignment needed for the new movement type.
while below is the only combination for PRD(cost (price) diffierences) is OBYC. and the first row is the current GL assignment for 101.
My question is : How do I assign diffierent GL for the newly copied movement type ,say Z01.
General modification       Debit          Credit
                                     530000       530000
PRA                              530050       530050
PRF                               530000       530000
Thanks in advance,
Linda

Hi,
Go to t code OMJJ and locate your movement type Z01. Then go to Account Grouping on the left pane and create a new account modifier there. Then give the same account modifier in OBYC settings and assign the GL account against it.
Thanks,
Atal

Scale does not work for the target movie when using a poster movie

Hello,
I have various size video files that I want to scale to a certain display area on a website. I'm using the scale="tofit" attribute. It works fine for the poster movie but when the target movie is loaded it does not scale! Is this a QT bug or by design? Is there a workaround to this or am I doing things wrong? All help is greatly appreciated.
<object classid="clsid:02BF25D5-8C17-4B23-BC80-D3488ABDDC6B" width="489" height="280" codebase="http://www.apple.com/qtactivex/qtplugin.cab">
<param name="autoplay" value="false">
<param name="controller" value="true">
<param name="href" value="heaven.mov">
<param name="pluginspage" value="http://www.apple.com/quicktime/download/indext.html">
<param name="target" value="myself">
<param name="type" value="video/quicktime">
<param name="src" value="movies/PosterTest.mov">
<param name="scale" value="tofit" >
<embed src="movies/PosterTest.mov" href="heaven.mov" width="489" height="280" autoplay="false" controller="true" border="0" pluginspage="http://www.apple.com/quicktime/download/indext.html" target="myself" type="video/quicktime" scale="tofit">
</object>
Dell inspiron 8200 Windows XP Pro

After quite a lot of Googling I found what I was looking for. This solution was quite hard to find. I found it on http://blog.deconcept.com/2005/01/26/web-standards-compliant-javascript-quicktim e-detect-and-embed (I'm using Geoff Stearns's script to embed my movies, it works great!)
Anyway here is a url to the final solution:
http://developer.apple.com/documentation/QuickTime/WhatsNewQT5/QT5NewChapt1/chap ter1_section32.html

How to use more than one indirect valuation module for the same wage type

Is it possible and how to use the u201CIndirect valuation based on master data: ICOMPu201D configuration to default the NUMBER and at the SAME TIME to use u201CDefine valuation of base wage types usingu201D to default the AMOUNT from one/two WTs ?

You can use the the same wage type for both number and amount but you can't assign 2 indirect valuation method for the same wage type at 1 time. I would rather suggest you to go for some customer specific indirect valuation instead of the standard one. You can use BAdI HR_INDVAL for the same.

I copied several MOV files to a CD. When I play them from the CD the video is fine but the audio works fine for the first few seconds then stops (using Qicktime Player 7.7.1. Everything works fine if I use VLC Media Player. Does anyone have any idea why?

I copied several MOV files to a CD. When I play them from the CD the video is fine but the audio works fine for the first few seconds then stops (using Qicktime Player 7.7.1. Everything works fine if I use VLC Media Player. Does anyone have any idea why?

My purpose for copying to a CD or DVD is so that I can make copies and send to friends and relatives. What is the best way to get these files on a CD/DVD with the right codecs?
The easiest thing to do is to simply tell your friends and relatives to copy the files to their local hard drive before playing them. Your basic problem is that data discs have a limited real time transfer rate. Since you say VLC plays the files fine, I might suspect its player is likely buffering the data while the QT 7 Player is not.
Data discs made for playback directly from the CD or DVD are normally encoded using MPEG-4/AVC (H.264) video with AAC audio. This is a modern codec which has specific settings to re-package the data (i.e., must be encoded using the multipass option and then select the "optimize for CD/DVD" option).

Updating materials issued for production thru movement type

hi
we are using repetitive manufacturing scenario, and we are using back flush, how to find out the materials issued for production thru movement types, from which tables can i get the data
from AUFK i am getting the movement types and the order number, and i am unable to find out material numbers.
the requirement is need to update the costs of the materials based on the movement types for the production

Hi
I dont know if this question falls under the category of "Asking basic questions"
You can use MB51 to get the desired info.. It will give you the Material Consumed + mvt type (261) and Order where the Material is consumed
br, Ajay M

Exception: No conversion value provided for the attribute [false]???

I mapped Boolean data type of a class with using Toplink Workbench.
I used convertor in mapping Boolean(java.lang.Boolean) to String (java.lang.String)
to hide data in form of 'T' or 'F' at DB.
But there is an exception ı cannot understand, toplink cannot convert from Boolean to String.
[TopLink Finer]: 2007.07.16 10:03:03.125--DatabaseSessionImpl(7818028)--Thread(Thread[HTTPThreadGroup-5,5,HTTPThreadGroup])--acquire unit of work: 27663966
[TopLink Finer]: 2007.07.16 10:03:03.125--UnitOfWork(27663966)--Thread(Thread[HTTPThreadGroup-5,5,HTTPThreadGroup])--TX binding to tx mgr, status=STATUS_ACTIVE
[TopLink Finest]: 2007.07.16 10:03:03.125--DatabaseSessionImpl(7818028)--Thread(Thread[HTTPThreadGroup-5,5,HTTPThreadGroup])--Execute query ReadAllQuery(com.ebk.model.modules.personel.bordro.gostergeler.EkGosterge)
[TopLink Warning]: 2007.07.16 10:03:03.187--DatabaseSessionImpl(7818028)--Thread(Thread[HTTPThreadGroup-5,5,HTTPThreadGroup])--Local Exception Stack:
Exception [TOPLINK-115] (Oracle TopLink - 10g Release 3 (10.1.3.1.0) (Build 061004)): oracle.toplink.exceptions.DescriptorException
Exception Description: No conversion value provided for the attribute [false].
Mapping: oracle.toplink.mappings.DirectToFieldMapping[ekGostergeTipi-->PER_EKGOSTERGE.EKGOSTERGETIPI]
Descriptor: RelationalDescriptor(com.ebk.model.modules.personel.bordro.gostergeler.EkGosterge --> [DatabaseTable(PER_EKGOSTERGE)])
     at oracle.toplink.exceptions.DescriptorException.noAttributeValueConversionToFieldValueProvided(DescriptorException.java:969)
     at oracle.toplink.mappings.converters.ObjectTypeConverter.convertObjectValueToDataValue(ObjectTypeConverter.java:214)
     at oracle.toplink.mappings.foundation.AbstractDirectMapping.getFieldValue(AbstractDirectMapping.java:439)
     at oracle.toplink.internal.expressions.QueryKeyExpression.getFieldValue(QueryKeyExpression.java:198)
     at oracle.toplink.internal.expressions.ConstantExpression.printSQL(ConstantExpression.java:77)
     at oracle.toplink.expressions.ExpressionOperator.printDuo(ExpressionOperator.java:1674)
     at oracle.toplink.internal.expressions.CompoundExpression.printSQL(CompoundExpression.java:216)
     at oracle.toplink.internal.expressions.RelationExpression.printSQL(RelationExpression.java:509)
     at oracle.toplink.expressions.ExpressionOperator.printDuo(ExpressionOperator.java:1669)
     at oracle.toplink.internal.expressions.CompoundExpression.printSQL(CompoundExpression.java:216)
     at oracle.toplink.expressions.ExpressionOperator.printDuo(ExpressionOperator.java:1669)
     at oracle.toplink.internal.expressions.CompoundExpression.printSQL(CompoundExpression.java:216)
     at oracle.toplink.expressions.ExpressionOperator.printDuo(ExpressionOperator.java:1669)
     at oracle.toplink.internal.expressions.CompoundExpression.printSQL(CompoundExpression.java:216)
     at oracle.toplink.expressions.ExpressionOperator.printDuo(ExpressionOperator.java:1669)
     at oracle.toplink.internal.expressions.CompoundExpression.printSQL(CompoundExpression.java:216)
     at oracle.toplink.expressions.ExpressionOperator.printDuo(ExpressionOperator.java:1669)
     at oracle.toplink.internal.expressions.CompoundExpression.printSQL(CompoundExpression.java:216)
     at oracle.toplink.internal.expressions.ExpressionSQLPrinter.translateExpression(ExpressionSQLPrinter.java:238)
     at oracle.toplink.internal.expressions.ExpressionSQLPrinter.printExpression(ExpressionSQLPrinter.java:106)
     at oracle.toplink.internal.expressions.SQLSelectStatement.printSQL(SQLSelectStatement.java:1183)
     at oracle.toplink.internal.expressions.SQLSelectStatement.buildCall(SQLSelectStatement.java:611)
     at oracle.toplink.publicinterface.Descriptor.buildCallFromStatement(Descriptor.java:558)
     at oracle.toplink.descriptors.ClassDescriptor.buildCallFromStatement(ClassDescriptor.java:191)
     at oracle.toplink.internal.queryframework.StatementQueryMechanism.setCallFromStatement(StatementQueryMechanism.java:371)
     at oracle.toplink.internal.queryframework.StatementQueryMechanism.prepareSelectAllRows(StatementQueryMechanism.java:297)
     at oracle.toplink.internal.queryframework.ExpressionQueryMechanism.prepareSelectAllRows(ExpressionQueryMechanism.java:687)
     at oracle.toplink.queryframework.ReadAllQuery.prepareSelectAllRows(ReadAllQuery.java:699)
     at oracle.toplink.queryframework.ReadAllQuery.prepare(ReadAllQuery.java:666)
     at oracle.toplink.queryframework.DatabaseQuery.checkPrepare(DatabaseQuery.java:405)
     at oracle.toplink.queryframework.ObjectLevelReadQuery.checkPrepare(ObjectLevelReadQuery.java:552)
     at oracle.toplink.queryframework.DatabaseQuery.checkPrepare(DatabaseQuery.java:375)
     at oracle.toplink.queryframework.DatabaseQuery.execute(DatabaseQuery.java:598)
     at oracle.toplink.queryframework.ObjectLevelReadQuery.execute(ObjectLevelReadQuery.java:779)
     at oracle.toplink.queryframework.ReadAllQuery.execute(ReadAllQuery.java:451)
     at oracle.toplink.publicinterface.Session.internalExecuteQuery(Session.java:2073)
     at oracle.toplink.publicinterface.Session.executeQuery(Session.java:988)
     at oracle.toplink.publicinterface.Session.executeQuery(Session.java:945)
     at com.ebk.service.FacadeBaseBean.findAllClassRecordsByAtrrs(FacadeBaseBean.java:213)
     at com.ebk.service.FacadeBaseBean.findAllClassRecordsByAtrrs(FacadeBaseBean.java:78)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.SetContextActionInterceptor.invoke(SetContextActionInterceptor.java:44)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
     at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
     at GostergeFacadeBean_LocalProxy_17mbg0c.findAllClassRecordsByAtrrs(Unknown Source)
     at com.ebk.modules.personel.beans.bordro.gostergeler.EkGostergeBean.isRecordExist(EkGostergeBean.java:500)
     at com.ebk.modules.personel.beans.bordro.gostergeler.EkGostergeBean.action_Kaydet(EkGostergeBean.java:593)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.sun.el.parser.AstValue.invoke(AstValue.java:130)
     at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:274)
     at com.sun.facelets.el.TagMethodExpression.invoke(TagMethodExpression.java:68)
     at com.sun.facelets.el.LegacyMethodBinding.invoke(LegacyMethodBinding.java:69)
     at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:92)
     at oracle.adf.view.faces.component.UIXCommand.broadcast(UIXCommand.java:211)
     at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:287)
     at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:401)
     at com.sun.faces.lifecycle.InvokeApplicationPhase.execute(InvokeApplicationPhase.java:95)
     at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:245)
     at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:110)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:213)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._invokeDoFilter(AdfFacesFilterImpl.java:228)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doFilterImpl(AdfFacesFilterImpl.java:197)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:123)
     at oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:103)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:162)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:620)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:369)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:865)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:447)
     at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:215)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
     at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
     at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
Cihangir

Configuring an object-type converter on a direct to field mapping to handle this case is very common. Please review your configuration and provide us more specific on how you configured the mapping and its converter.
Doug

Can i connect a external hard drive to apple tv 3 generation, for see my movies itunes with out use streaming or icloud?

can i connect a external hard drive to apple tv 3 generation, for see my movies itunes with out use streaming or icloud? in apple tv 3 and 2?
That i want to know is i can connect a external hard drive to apple tv, for see my movies that i keep in my external hard drive, i dont want to see then whit the streaming and icloud, or used my laptop o pc for access de movies and stuff.
i put iny spanish to, because i feel my english is not so good, but i hope you understand me.
if i can´t connect a external hard drive, wich others media players divices you know that can see itunes movies?
¿quisiera saber si se puede conectar una memoria externa al apple tv, para ver el contenido de itunes que tengo guardado en esa memoria como peliculas, ect?
lo que no quiero es usar la icloud, o el servicio streamig para ver mi contenido, ni tener que usar la computadora para ver mi contenido el la tv?
y de no poderse conectar que otros dispositivos media pleyer conoces para ver peliculas de itunes en la tv?

Welcome to the Apple Community.
can i connect a external hard drive to apple tv 3 generation
Unfortunately not.

How do I have itunes use/detect my external hard drive and place music on the external drive from the itunes store? There are no music files on my pc yet. I will like to do this after installing itunes 11 on my pc for the first time. I am using windows 7

How do I have itunes use/detect my external hard drive and place music on the external drive from the itunes store? There are no music files on my pc yet. I will like to do this after installing itunes 11 on my pc for the first time. I am using windows 7. HP computer intel Dual Core. Thanks for any help!

Hey idw3,
Welcome to Apple Support Communities, and thanks for the question. Follow the instructions on this article to move your iTunes Media folder to an external hard drive:
iTunes for Windows: Moving your iTunes Media folder
http://support.apple.com/kb/HT1364
Regards,
David

Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.

Hi Friends,
Request for the permission of type System.Data.SqlClient.SqlClientPermission System.Data Version 1.0.5000.0 Culture neutral .This error is recieving when ever i tried to use the sql connection (with Visual
studio C#) in sharepoint portal installed application.
Please help me if any answers for the issue.

Hi,
Open wss_mediumtrust.config & wss_minimaltrust.config. SharePoint 2013(C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\config\).
Find in wss_mediumtrust.config:
<SecurityClass
Name="SqlClientPermission"
Description="System.Data.SqlClient.SqlClientPermis sion, System.Data,
Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/>
Copy and paste it in to the <SecurityClasses> node of wss_minimaltrust.config.
In the PermissionSet section of this configuration file, add the following:
Find in wss_mediumtrust.config:
<IPermission class="SqlClientPermission" version="1" Unrestricted="true"/>
Copy and paste it in to the a <PermissionSet> node of wss_minimaltrust.config.
Here is a similar thread for your reference:
https://social.msdn.microsoft.com/Forums/en-US/a1c8f2bf-2575-40b4-87f1-4f98462b3234/request-for-the-permission-of-type-systemdatasqlclientsqlclientpermission-systemdata-version?forum=tfssetup
Best Regards
Dennis Guo
TechNet Community Support

For the Attribute Movement type(BWA) we use Value " 201" and not "101" why?

Similar Messages

Maybe you are looking for