For the blue screen at Leopard install, this tech report works for me

http://docs.info.apple.com/article.html?artnum=306857
I used the second "solution" and my system booted properly after typing in the command lines mentioned in the article.
Good luck

Restart your computer with the original install disk in the drive. Hold down on the "d" key. This will startup the computer into the Apple Hardware Test. If you can't enter the Apple Hardware Test, you have some kind of hardware failure (with the logic board or maybe with the optical drive). You should call AppleCare Support to set-up a repair. If you can get the AHT to run, go through the extended tests and see if you get an error message. If you do, again, you should call AppleCare Support and get a repair scheduled. Let them know the exact error code you saw with the AHT. If you can run the AHT and no error appears, this does not completely rule-out a hardware failure, only a failure that the utility is looking for. Let us know what you find out.
-Doug

Similar Messages

  • 10.5 Install Brings the Blue Screen of Death

    Hi,
    I could really use some help. I just tried to upgrade from 10.4.11 to 10.5. I'm on a power pc mac (12" G4) with 1.67 GHz. Here's a rundown of what I've done so far.
    1. Upgraded from 10.5 disc - went all the way through, but upon restart, i got the blue screen of death. I could see and move the cursor but nothing else.
    2. Manually shut down. Restarted with installation disc and ran disk utility - no disk errors or permissions errors.
    3. Restarted again with internal drive as startup disk. Again, blue screen of death.
    4. Tried to reset pram (reset-nvram and reset-all). Again, blue screen of death.
    5. Went back to install disc and re-installed 10.5. Again, went through successfully. Upon restart, yet again the blue screen of death. This time, the cursor is the colored spinning wheel. I've let it go overnight in case in needed a little time and it's still there.
    PLEASE HELP! I've backed up everything, but there are a handful of files I neglected to backup. Not life-changing, but would be good to salvage.
    Thanks in advance for any advice you can offer.
    J-

    I did, but didn't find this until today.
    http://docs.info.apple.com/article.html?artnum=306857
    I had already given up on a straight upgrade and instead went for the archive and install option which has worked without a hitch. All is well. Has even resolved my synching woes with my treo. Note that you should make sure you have enough drive space since I'm now down to a paltry 3GB when I once had about 12GB.

  • IMac G5 running OS 10.4.11. Started playing with a bluetooth speaker (may or may not be related). Now I cannot get past the blue screen on startup. I can get into safe mode. Tried install disc for disc utility and reloaded OS. Still get blue screen.

    I have an older iMac G5 running OS 10.4.11. The other day I started playing with a bluetooth speaker (may or may not be related). Now I cannot get past the blue screen on startup.
    I can get into safe mode. But no regular startup.
    I tried disabling bluetooth, thinking that might be related. It didn't help.
    I even tried using the install disc to run disc utility. That didn't work so I reloaded the OS.
    But I still get hung on the blue screen when trying a normal startup.
    All help would be appreciated.

    Try resetting the PMU/SMU and PRAM/NVRAM. You'd need to identify the mode of resetting depending on the model of your G5 iMac. The Apple support sites that would help you for this are –
    http://support.apple.com/kb/HT1436
    http://support.apple.com/kb/HT1939
    http://support.apple.com/kb/HT1767
    http://support.apple.com/kb/HT1379
    I hope this solves your problem.

  • I tried to soft reset my ipod touch with the top button and the screen button.  it turned off and went to the blue screen with the apple.  now it won't do anything-it has stayed on that scren for 4 hours now.  does anyone know how i can fix this?

    i tried to soft reset my ipod touch with the top button and the screen button.  it turned off and then went to the blue screen with the apple like it should.  however, it now just stays on that screen.  it has a sort of clock looking thing at the bottom of the apple that does not move either.  it has stayed on this screen for over 4 hours.  i also can not hard reset it in itunes.  i am not really goood at this sort of thing.  does anyone have this problem or a possible solution?  thanks

    See Here for
    Frozen or unresponsive iPod touch
    The Basic Troubleshooting Steps are:
    Restart..  Reset..  Restore...
    Try this First... You will Not Lose Any Data...
    Turn the iPod Off... ( if it isn’t already )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear and then Disappear...
    Usually takes about 15 - 20 Seconds... (But can take Longer...)
    Release the Buttons...
    Turn the iPod On...
    If that does not help... See Here:
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414

  • I got the Blue Screen-But Not After Installing Leopard

    I have not installed anything recently. Except Quake 4 but haven't even run it yet. I Rebuilt my Permissions and Restarted and suddenly got the Blue Screen. I had to hold down the power button and reboot. This is the first time it's ever happened. After I rebooted I got an error message saying OSX shut down unexpectedly. It also said this:
    Sun Feb 24 10:46:29 2008
    panic(cpu 0 caller 0x0019D334): "simple lock deadlock detection: lock=0xd8428b0, cpu=0, owning thread=0xe2376b0"@/SourceCache/xnu/xnu-1228.3.13/osfmk/i386/locks_i386.c:317
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x108cd8 : 0x12b0e1 (0x457024 0x108d0c 0x13321a 0x0)
    0x108d28 : 0x19d334 (0x45eaa8 0xd8428b0 0x0 0xe2376b0)
    0x108d48 : 0x7c0fff21 (0xd8428b0 0x8 0x1 0x19d311)
    0x108da8 : 0x1aeeeb (0x7c1f10a4 0x5328a4 0x2ae14865 0xd9dbd60)
    0x108dc8 : 0x136aff (0x3 0x5 0x108e18 0x5baa44)
    0x108de8 : 0x141681 (0xd9dbd60 0x0 0x108e18 0x41d16e)
    0x108e18 : 0x41d774 (0x5baa40 0xd96bc5c 0x0 0x1298d4)
    0x108e38 : 0x836b6ebf (0xd96bc40 0x2 0x108e88 0x1415aa)
    0x108e98 : 0x836b6f1a (0xd933000 0x0 0x1 0x8358d000)
    0x108eb8 : 0x420af3 (0xd933000 0xda98c80 0x10 0x1997f6)
    0x108ef8 : 0x435cbb (0xda98c80 0x0 0xd980f80 0x0)
    0x108f28 : 0x82d9e521 (0xdab8880 0x0 0xdab8880 0x0)
    0x108f58 : 0x7bee5777 (0xd7fb000 0x0 0xd8de500 0x53)
    0x108f78 : 0x7bedec41 (0xd7d2a00 0x0 0xd8de500 0x53)
    0x108f98 : 0x445d88 (0xd8ec400 0x0 0xd915b00 0x53)
    0x108fd8 : 0x19ed2e (0x83dd3db0 0x0 0x0 0x4e5000)
    Backtrace continues...
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.driver.AppleUSBEHCI(3.0.7)@0x836b3000->0x836c4fff
    dependency: com.apple.iokit.IOUSBFamily(3.0.8)@0x8339b000
    dependency: com.apple.iokit.IOPCIFamily(2.4.1)@0x7be78000
    com.apple.driver.AppleAPIC(1.2.0)@0x82d9d000->0x82d9ffff
    com.apple.driver.AppleIntelCPUPowerManagement(9.33.0)@0x7c0fe000->0x7c116fff
    com.apple.driver.AppleACPIPlatform(1.2.1)@0x7bedd000->0x7bf19fff
    dependency: com.apple.iokit.IOPCIFamily(2.4.1)@0x7be78000
    dependency: com.apple.iokit.IOACPIFamily(1.2.0)@0x7be8e000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    9C31
    Kernel version:
    Darwin Kernel Version 9.2.0: Tue Feb 5 16:13:22 PST 2008; root:xnu-1228.3.13~1/RELEASE_I386
    System model name: MacPro1,1 (Mac-F4208DC8)
    --Does anyone know what this means or why it happened? Thanks a lot.

    Start with http://support.apple.com/kb/TS1541 and the links therein.

  • Blue screen appears after installing Leopard and restarting

    I tried to install Leopard on my MacBook but got the Blue screen after restarting. I found the apple support article number 306857 and tried option C without success. I don't have a firewire cable so option A is out. I don't know how to reinstall Leopard as Option B suggested. I can't get beyond the blue screen. Any suggestions?

    The Apple site is under maintenance, so I can't check the details of the options, but I assume option C is the terminal, when you've started up in Safe Mode. This method worked for me on two machines. You need to type the commands precisely and exactly as they appear in the article, including spaces where appropriate.
    To reinstall Leopard, start up with the installation disk in the drive, and when you hear the startup chime, hold down the C key on your keyboard. You need a USB keyboard. You should get the installation screen.

  • Blue screen on start up.  The wheel spin and the blue screen gets brighter for a second, then the blue screen dims and it repeats with the wheel.

    When I start up my imac, I get a blue screen.  The wheel spin and the screen gets brighter for a second, then the blue screen dims and it repeats with the wheel.

    Are you referring to the startup screen which is normally gray with the dark gray Apple logo or are you referring the login screen which is typically blue? If it's the latter you might give this a try:
    Clearing Caches to Fix Login Problem
    You will need to type some Unix commands. If you are not comfortable with this, I don't know of anything other than a re-install. But if you are careful, you should be OK. I recommend you print this out in a largish mono-spaced font so you don't miss any spaces (or add extra ones). Note that case is important.
    Be careful. Some of these commands are dangerous, since you are going to be root.
    Start up in Single-user Mode. When this has finished you will see a prompt ending in '#', although there may be other messages. Enter the following commands after the prompt:
    /sbin/fsck -fy
    Press RETURN. Wait a few seconds for 8-10 lines of output. If the last line says repairs were carried out, repeat this command until you get a message 'The volume <yourdiskname> appears to be OK'. Then continue with:
    /sbin/mount -uw /
    cd /Library/Preferences
    rm com.apple.loginwindow.plist
    rm com.apple.windowserver.plist
    cd /Library/Caches
    rm -r *
    cd /System/Library
    cd /System/Library/Caches
    rm -r *
    reboot
    Press RETURN after each command.
    This should now take you to a proper login screen after the normal boot sequence. You should then Repair Permissions by using Disk Utility (in your /Applications/Utilities folder).
    If it's the former then reinstall OS X. For Snow Leopard:
    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

  • Can't Start Up: staying in the blue screen for 8 hours...

    HELP!!!!
    My powerbook G4 can't start up
    All goes well during StartUp untill it gets to a Blue Screen
    then it stays there
    its been 8 hours so far...
    ( i can see the mouse pointer )
    This is my 3rd try -- but every time it just stuck in the blue screen stage
    Please help.

    First, I'd review the troubleshooting procedures on this page:
    http://www.apple.com/support/powerbook/
    Other things to try: remove the main battery and let the PB sit with the A/C adaptor connected for several hours. This will make sure the backup battery has some charge assuming it's not completely dead.
    Then try starting the computer with the SHIFT key depressed ("Safe mode"). This does some directory repair. If you get a desktop via a safe boot, do not try to use the computer just yet. Do a normal restart, then see if it is usable.
    If you have your system disks or the disks you used to install Tiger, dee if the computer will boot from them by holding the "C" key during boot.
    How full is you hard drive? You need a minimum of 15 percent free space for the OS to work with any efficiency.
    Because there are several variants of the 17" G4 PowerBook, it would be helpful to people here if you would add the processor speed to your equipment line. Showing how much RAM you have is also useful. That way you can get help faster because people don't have to ask first.

  • Firefox is causing my computer to crash. It is causing the blue screen of death. What can I do to solve this problem?

    Mozilla firefox is crashing my computer. It will run and the blue screen would come on because of this I cannot run firefox on my computer anymore. What to do?
    == This happened ==
    Every time Firefox opened
    == June 2010 ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; InfoPath.2; .NET CLR 3.5.30729; .NET CLR 3.0.30729; OfficeLiveConnector.1.5; OfficeLivePatch.1.3; .NET4.0C)

    Firefox doesn't do email, it's a web browser.
    If you are using Firefox to access your mail, you are using "web-mail". You need to seek support from your service provider or a forum for that service.
    If your problem is with Mozilla Thunderbird, see this forum for support.
    [http://www.mozillamessaging.com/en-US/support/]
    or this one
    [http://forums.mozillazine.org/viewforum.php?f=39]

  • I did not install bonjour when I installed itunes now everytime I go to the itunes store I get the blue screen.  How to download bonjour?  Do I have to re install itunes?  If I do, will my music be lost?

    I did not install bonjour when I installed itunes now everytime I go to the itunes store I get the blue screen.  How to download bonjour?  Do I have to re install itunes?  If I do, will my music be lost?

    I'd try the following document first:
    iTunes for Windows: System restarts, blue screen, or quits unexpectedly when accessing iTunes Store

  • I connected my laptop to the tv and it has worked before. this time only the laptop flashes the blue screen and the tv is saying no signal. when i tried to check the dispaly arrangement it says this:The Arrangement tab of Displays preferences is hidden

    i connected my laptop to the tv and it has worked before. this time only the laptop flashes the blue screen and the tv is saying no signal. when i tried to check the dispaly arrangement it says this:The Arrangement tab of Displays preferences is hidden because you only have a single display attached to this computer.

    It is not properly connected to the network.
    Make sure location is set correctly
    DNS should be on auto (settings - general - network)
    Try ethernet
    Signal strength on device won't account for issues, you would need a network report from istumbler, netstumbler or similar. This will show accurate signal strength along with noise and nearby networks

  • When I open FireFox i get the blue screen of death and then vista restarts. I get to login and then afterthe welcome window it crashes and restarts again. I can open in safe mode but if I open firefox again it restarts this loop.

    The other day I opened firefox after the latest update in September. Firefox then closes and then i get logged off and vista(32 bit) restarts. I get back to login and when I try to login it gives me the blue screen and restarts again with the selection screen (start in safe mode....)I was able to login on safe mode and then on admin afterwards. Thinking the problem was just an error I went back and opened firefox on my account and the loop started again. I was forced to remove firefox but I want ti back and I want to know how this can be fixed so I can put it back on my computer.

    See below -- the way I asked the question the first time may not be clear. This post was a goof but I can't figure out how to delete it

  • I have a new iPhone 4 and every time I plug it into my laptop I get the "blue screen of death", it didn't do this the first time because I downloaded all my music from iTunes but ever since it has done this.  Anybody have any insight?

    I have an iPhone 4 and downloaded all my iTunes music to it.  Now when I connect it to my laptop I automatically get the "blue screen of death", does anyone have any insight into this problem?

    This will happen if you have photos in your camera roll and an out-of-date scanner or webcam driver. See this: http://support.apple.com/kb/TS1502

  • How to fix the Blue Screen of Death for iPhone 5S?

    I have an iPhone 5S and I never got water on it, dropped it, or inflicted any kind of damage upon it. But one day when I turned it on it kept getting this blue screen and then restarting CONSTANTLY. This is referred to as the Blue Screen of Death (BSOD). Does anyone know how to actually fix this problem besides just restoring the phone (I already tried that.)

    Hi ..
    If you restored the iPhone to factory settings and it still won't startup correctly, make a reservation at a Genius Bar.

  • I have an IPod 2nd generation I bought from a pawn shop.  It worked for a day but now when I try to charge it, it keeps switching back and forth from the large full screen icon of a low battery and a lighting bolt below to the blue screen with the apple s

    I have an IPod 2nd generation I bought from a pawn shop.  It worked for a day but now when I try to charge it, it keeps switching back and forth from the large full screen icon of a low battery and a lighting bolt below to the blue screen with the apple symbol in the middle.  I had it on charge all night but still dead.

    Try here.
    iPod touch: Hardware troubleshooting
    You may have a hardware problem.

Maybe you are looking for

  • Linux on a MacBook Pro?

    Hi. I'd like to run Linux on my MBP because I need it for work, but I'm having a bit of trouble. Currently I have Windows and SUSE 10.2 running under Parallels; I've tried to get Ubuntu Feisty Fawn on it, but the installation failed miserably. SUSE r

  • Is there a way to disable/restrict access to Help Restart with Add-ons Disabled or just to Help altogether?

    I have students who use Help>Restart with Add-ons Disabled to disable add-ons, reset things, and go into Safe Mode. I'd like to be able to disable their ability to do so. Is this possible? I am also using a product called Fortres 101, which is a file

  • Cannot resize a window

    I am new to the Mac and am having a problem. I did a search but couldn't find an answer. I installed Adobe Lightroom and expanded the window to the point where I cannot see either the resize handle or the red, yellow, or green button at the top. I ca

  • CALL TRANSACTION LM03

    An External Program does a simple CALL TRANSACTION 'LM03'. Passing in the Transfer Order Number. The desired result is to return to the calling program, instead it returns to the RF Menu. It appears the call stack in the LMOB will prevent us from ret

  • Mozilla Sunbird/Lightning?

    Does anybody know if ther are plans to provide for synchronisation with this Mozilla software? I'd really like to be able to do it! Nokia 6120 classic