For the Inspection lot status is CRTD instead of REL status

Dear Experts,
Today I have observed strange behavoir of the system.
For the Finished material 04 insp type, Every day we used to generate inspection lots automatically with MB31for 101 mov type.
generated inspection lot status will be REL bydefault. Today we observed system status is CRTD.
I have checked any material master/Inspection plan been change or not, but it was not changed.
Please suggest how this behavior happen suddenly.
Regards
Don

Dear Don,
Check in SPRO for inspection type configuration. Some body has changed the 'Task list usage' for Inspection type.
If you are using '1' and if there is other one except '1' then system will create inspection lot in CRTD status.
You need to change it manually in QA02 and assigne plan.
Thanks and Regards
Harriesh.

Similar Messages

Batch not created for the Inspection lot?

Hi Experts,
I have created a the production order by inputting the Batch in the GR tab and released the production order. The release of Production order will create a Type 03 lot , but surprisingly it doesn't show the Batch in the Batch field when i look the inspection lot that was created by release of production order, instead it shows blank. I have checked the material master and it is batch managed material. Please let me know where I'm going wrong.
Configuration- Batch is unique at material level indicator checked
my plant has Batch status management indicator
Please find the screenshot below for type 03 lot and also the Batch management indicator in material master in sales/general view, work scheduling and warehouse1.
Thanks,
Pavan

Hi Pavan,
According to SAP Note 50618, you may consider to implement the correction on that note or use partial lot assignment.
For partial lot assignment, you can find the setting in Routing header and customizing in SPRO with path: Quality Management - Quality Planning - Inspection Planning - General - Define Identifier for Inspection Points.
There's also another discussion regarding this issue. Please find here.
Regards,
Julian

How to change the Status CRTD of the Inspection Lot?

Dear all.
I want to Complete an Inspection Lot 10000000005 In the T-CODE qvm2.When I select the Inspection Lot 10000000005 and press F8 to Complete the Inspection,the SAP show an error message "Status check error".
And the detail info show that the error was cause by the Status CRTD of the Inspection Lot.I check the Status of the Inspection Lot 10000000005 and found that it's Status was CRTD CHCR SPRQ.My question was how to change the Status CRTD of the Inspection Lot?
Regard
Yoda

Hi
CRTD means ...
In material master QM vew-inspection setup->Inspect with task list tick is there.
Now to change status,
Go to Qp01>create a task list for material(If not exists)>remember date of creation of task list must be prior to date to creation of inspec lot
If task list is created/exists>go to QA02.<inspection specification -->click on Inspec Spec
and attach task list
go to sample tab....click on sample.
Now save it.
Status will change to REL
Regards
Sujit

Error in Setup Tables for QM Inspection Lots

Hi,
I have an issue when I attempt to fill the setup tables for QM that I receive the following error for the Inspection Lots (QV) only. When I fill the setup tables for Notifications and Inspection Results, then these are OK and use the same standard function module 'qmex_inspection_lot_import_ini'.
"Internal error in program SAPLQMEX, function module / subroutine qmex_inspection_lot_import_ini, code 1".
Has anyone any ideas of the cause or have you experienced this before?
Thanks,
Scott

Hi,
The most likely reason that leads to the above error message in your
system is an inconsistency of the inspection lots.
To get the inconsistent inspection lot,please check your system in the
following way:
- transaction OLIQBW for running Setup table
- switch on debugging mode
- set break point in the function QMEX_INSPECTION_LOT_IMPORT_INI
on the line:
ELSE.
   MESSAGE e011(qmex) WITH sy-repid
                           'qmex_inspection_lot_import_ini'
                           '1'.
> then excecute F8 to go to this break point.
- double klick on ' l_qals-prueflos'
on line 77 in the same function QMEX_INSPECTION_LOT_IMPORT_INI:
READ TABLE qave_tab INTO l_qave
                    WITH KEY prueflos = l_qals-prueflos <      here !
                    BINARY SEARCH.
Please check following note:
305244 Missing operations for the inspection lot
89541 Inspection lot exists w/o status object: EM BS001
536769 Inspection lots without status object
Thanks,
Venkat

How partial inspection is done for a inspection lot & vendor payment done based on inspection result

Dear Gurus,
In our business 1000 bag material is received in one material document. So one Inspection lot is created.
Now business take randomly 10 bags from that 1000 bag & inspected. The Bags are inspected on various parameters such as Weight , Fabric , Valve Size , Cross Sec Area, Print Quality , Stitching Thread , etc . The values for all this types of parameters are prepared in an excel sheet in a prescribed format.
The Values for each Quality Parameters are then matched with the desired prescribed average figures.
Based on the Values which deviate from "Average" figures , deductions are computed
Logic is 1% for single defect in a bag for 1 parameter . Likewise if more defects is found then add 1% in multiples
e.g 1% + 5 defects then .05 * basic Raw material cost .
This figure along with proper description is recorded under "Remarks" column of the report format and send to Accounts department for the
deduction process from Vendor
we need to capture the inspection parameters in system as per the above process.
And please tell me how I configure this process in SAP .
Thanks & Regards,
Bubai

Hi Bubai,
you can create a QM Control Key (which is used to QM View of Material Master) which you have to set the indicator Block Invoice. This indicator is blocked invoice with blocking reason I (I = Inspection) if there is still no usage decision for the inspection lot or the inspection lot is reject.
(SPRO -> Quality Management -> QM in Logistics -> QM in Procurement -> Define Control Keys).
Best Regards,
Apostolos

Standard Report for all inspection lots

Dear all,
Pls guide me from where I can retrieve the data for result recorded for MIC, inspection lot wise.
Actually currently working for Pharma company where we are using, Inspection Plan (task list type Q), with inspection point 200 u2013 Physical sample. Materials are being managed through Batches, so each inspection lot is having separate batch number.
Now the requirement is to find a STD sap report that can retrieve us the result for a material for all the inspection lots (Batches) it have, in the report type from where I can down load it to word/excel.
In short, the report should contain, Material, results for all MICs under all inspection lots.
I have already tried out;
QGP1 but it shoe the result for only a MIC at a time.
QGA2 but not able to visualize results for all MICs at once.
MCXB but, gives only the quantity of MICs not the results of it.
Regards,
Shyamal Joshi

Hi Craig,
The requriement is to have results for the Inspection lots only, not for the batch values.
The report MCXD is giving the quantitative analysis for the batches, I will be very pleased if you suggest me any report that gives me the results (values entered during result recording) of these MICs, inspection lot wise, just as the MCXD give quantitative.
I think the term BATCH is creating confusion, that is Y u have suggested me CL03N, but as I have mentioned eariler also, currenlt working with Pharma company, where each manufacturing lot is give a batch number, (in sap terminology the Batch management function, MSC1N), that is why i freauently used BATCH. Sorry for that communicational error from my side, and I am very much thank full to you for your each valuable comment, suggestion.
Regards,
Shyamal Joshi

Reverse GR after the Quality has passed the inspection lot

I have a situation where the GR was done, Quality has approved the materail, now we are trying to reverse the GR...the system is giving error when trying to cancel the GR...
"You cannot cancel GR, since inspection lot is already partly posted"
How can I reverse this GR,
PLease advice,
Sam

hi sameer
To be able to reverse a stock posting for an inspection lot, the following conditions must be met:
A usage decision has been made for the inspection lot.
The goods in the inspection lot have been posted from inspection stock to blocked stock or unrestricted-use stock.
If you posted the goods to a stock other than blocked stock or unrestricted-use stock (for example, to scrap), you must first post the stock back to blocked stock before you can reverse the original stock posting
Reversing Stock Postings
Choose Logistics ® Materials Management ® Inventory Management ® Goods Movement ® Goods receipt ® For purchase order ® PO number known.
The initial screen for creating a goods receipt for a purchase order appears.
In the field for the movement type, enter 102 (goods receipt for a purchase order into warehouse - reversal).
In the field for the purchase order, enter the purchase order number for the original goods receipt.
You can copy the purchase order number from the inspection lot.
Choose Enter to display the selection screen for the purchase order items.
Select the purchase order item for which you want to create the goods receipt and set the Stock type indicator to the stock to which the goods were originally posted with the usage decision (for example, F for unrestricted-use stock or S for blocked stock).
Save the goods receipt and exit the Materials Management component.
Choose Logistics ® Quality management ® Quality inspection ® Inspection lot ® Usage decision ® Change with history.
The initial screen for changing a usage decision appears.
Enter the number of the inspection lot for which you previously made the usage decision and choose Usage decision (UD).
To cancel the inspection lot, choose Usage decision ® Functions ® Cancel lot in the usage decision screen
regards
thyagarajan

Possibility of Stock posting when the inspection lot is in created status?

Dear,
Is it possible to do stock posting when the inspection lot is in created status?
Please help. Yor suggestion will be appriciated.
Regards
Vivek Deshpande

hi
In standard the creation status wont allow to post the material ,another way is change the system status CRTD in BS22 and allow inventory posting( i haven't checked)
regards
thyagarajan

Assignment of task list after the inspection lot status is released

Hi,
I have applied a user status with which i am able to release the inspection lot.After that i am going to assign a task list. But it is not getting assigned.
please help me.
Regards
Vivek Deshpande

Hi,
Key date is same. I have checked for it.
What i am saying is , i have manually updated inspection lot status to release state by applying user status. And after that i am trying to assign inspection task list to the inspection lot.But i am unable to do so.
Can i do this ? Please help
Vivek Deshpande

Customer number not in the inspection lot for a make to order scenario

Hi All,
I know that standard SAP will get the Customer number into Insp. lot only for insp. types 10/11/12. I am wondering if someone know a way to get the customer no. into insp. lot for insp. type 04 where the material is make-to-order scenario and the Production/Process order has the Sales order and customer no. without activating User-exit. The quality users want to be able to see the customer no. in insp. lot without having them to go to process order.
It makes no sense to me why the customer no. is not brought into insp. lot when that is available in the Prod/process order, which can further be used to select the customer specific insp. plans for 04 insp. type Insp. lot without using Variant configuration.
Any light on this topic is appreciated.
Thanks.

Hi Srikant,
I guess.........
Normally the inspection lot refers the triggering document that are the trigger cause for them.
- Inspection type 01: - Purchase Order and GR material document.
- Inspection type 03: - Pro. Order Number
The same way...
The inspection type 10\11\12 are purely related to the SD, and directly integrates QM and SD. Hence in the inspection lot for the inspection types directly integrated to SD, it will furnish the Sales order number \ Customer.
But the inspection type 04 is purely have it's relation to Production process. So it will have the details related to integrations it has i.e. the "Pro. Order." Hence it integrates QM-PP, it have the data related to PP (Pro Order), not the SD's one.
But I think one way you can achieve it,
Assign the Customer number also to the inspection plan along with the Material. So I think at the time of assigning the inspection plan to the inspection lot, it will refer the Customer number also and will display the Customer number along with Task list Group\Group Counter, in the inspection specification screen in QA03/02
Regards,
Shyamal

SAP QM Default Inspection Plan for all Inspection Lots created in the Plant

Scenario: We have a Proto type plant in which Daily 15 to 20 materials are created every day. We have only one inspection plan for all the materials.
Problem: We don't want to do material assignment in the Inspection Plant header every time a new material is created
Requirement: Is there any way to default the inspection plan for all the inspection lots created in the Plant by Standard Configuration or User Exit.
Your answers will be much appreciated and rewarded.
Thanks in advance,
Thiyagu

Hi,
In our case Creation of Inspection lots are controlled by QM View of Material Master. Our problem is to find alternative for assignment of New Materials in the Plan header in Tcode QP02, as we have only ONE INSPECTION PLAN. So our expection is all QM Inspection Lot created in the Plant should always get assigned to the SINGLE INSPECTION PLAN, with out doing any assignment of material in the Plan.
Thanks,
Thiyagu.

Enhancement for QA01 (Inspection Lot)

For creation of new inspection lot via QA01; upon saving, user wants to disable printing of the inspection lot form (sapscript using standard print program 'RQEEAS20') when the system status 'QALS-KZSKIPLOT' = 'X'. May I know how should I go about to start? (if user exit? which user exit?)

Hello,
Here i suggest you that if you are using Exit for UD then in that only just apply one code where program first will check the QAMR/QASR etc. all result table field w.r.t inspection lot and if fields found empty means no data or RR then system wont pass UD code for UD posting.
Or just make first MIC as required MIC and apply the code in that first MIC, if that MIC value is blank then again system wont allo UD.
Secondly, Status profile maintenance is also an another stdn way to execute the requirement.
Regards

Transaction to close the inspection lot in mass.

Hello,
Due to settings in the material's QM view , inspection lot with origin 89 were created for all the process orders , we don't use these inspection lot for recording any results , now we are not able to close the process order because the inspection lot related to the order are not closed yet.
Can you please let me know transaction to close all the inspection lots collectively so that i can proceed to close the orders.
regards
jeet

Are you sure the lots are inspection origin 89 and that those are preventing the closing of the orders? 89's should be manual inspection lots and should not have been caused by any settings in the material master but would have had to be caused by someone creating them. There is no reference to an order number in an 89 lot so I'm not sure how they could be blocking an order. Now.. If you created these as the result of a custom development that might be different. But they still shouldn't be able to block the closing of an order, unless of course you have some other development or user exit being used to check on the lot.
That said, unless you record results in the 89 lots you can't mass process them close. You have to do them one by one.
I would also suggest you look for inspection lots with an 03 origin as these CAN influence the orders. But again, they usually don't prevent you from marking the order technically complete. If you mark the orders technically complete, you can then use QA40 to close the 03 lots where the orders are TECO status.
FF

Inspection Characteristic is not being displayed in the inspection lot

I have created a Calibration order by first creating method, then a MIC, same is attached to a task list and then a Plan.
But when i trigger a order for that task list the inspection characteristics as mentioned in the task list does not appear in the order.
Please let me know how to get the inspection characteristics in the order.
I have checked the task list, in that the Inspection characteristics is visible.
Please help
Praneet

I have noted one thing, in inspection lot the sample size is shown as zero for the equipment where the inspection characteristic is not being displayed and it is shown as one for the lot where the inspection characteristic is displayed.
Both the Inspection lot the task list is same
Please reply

Resetting a sample for an inspection lot

How to reset a sample to an inspection lot, and transfer stock to inspection lot.

Try using the transaction codes QAC2 and QAC3 for both of your queries.
or open the inspection lot in change mode and assign the sample you would like.
Hope this helps you.

For the Inspection lot status is CRTD instead of REL status

Similar Messages

Maybe you are looking for